scholarly journals Enhancing Dissolution Rate and Antibacterial Efficiency of Azithromycin through Drug-Drug Cocrystals with Paracetamol

Antibiotics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 939
Author(s):  
Noor Ul Islam ◽  
Ezzat Khan ◽  
Muhammad Naveed Umar ◽  
Attaullah Shah ◽  
Muhammad Zahoor ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
High Performance ◽  
Biological Activities ◽  
Thermo Gravimetric Analysis ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Gravimetric Analysis ◽  
Pxrd Pattern ◽  
Pharmaceutical Industries

Cocrystallization is a promising approach to alter physicochemical properties of active pharmaceutical ingredients (hereafter abbreviated as APIs) bearing poor profile. Nowadays pharmaceutical industries are focused on preparing drug-drug cocrystals of APIs that are often prescribed in combination therapies by physicians. Physicians normally prescribe antibiotic with an analgesic/antipyretic drug to combat several ailments in a better and more efficient way. In this work, azithromycin (AZT) and paracetamol (PCM) cocrystals were prepared in 1:1 molar ratio using slow solvent evaporation method. The cocrystals were characterized by Fourier transform infrared (FTIR), Raman spectroscopy, powder X-ray diffraction (PXRD), differential scanning calorimeter (DSC), thermo gravimetric analysis (TGA) and high-performance liquid chromatography (HPLC). Vibrational spectroscopy and DSC confirmed that both APIs interact physically and showed chemical compatibility, while PXRD pattern of the starting material and products revealed that cocrystal have in a unique crystalline phase. The degree of hydration was confirmed by TGA analysis and result indicates monohydrate cocrystal formation. The HPLC analysis confirmed equimolar ratio of AZT:PCM in the cocrystal. The in vitro dissolution rate, saturation solubility, and antimicrobial activity were evaluated for AZT dihydrate and the resulting cocrystals. The cocrystals exhibited better dissolution rate, solubility and enhanced biological activities.

Formulation, Physicochemical Evaluation, and Dissolution Studies of Carbamazepine Solid Dispersions

1970 ◽  
Vol 5 (3) ◽  
pp. 1790-1807
Author(s):  
M. Mohan Varma ◽  
Razia Begum S K
Keyword(s):  
Dissolution Rate ◽  
Marked Reduction ◽  
Solid Dispersions ◽  
Thermo Gravimetric Analysis ◽  
Research Work ◽  
In Vitro Dissolution ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Disintegration Time

Carbamazepine is a water-insoluble antiepileptic drug. Being a BCS class-II drug, its absorption is dissolution rate limited. Solid dispersions were prepared to enhance the dissolution rate of the drug. Crospovidone and croscarmellose sodium were used as the hydrophilic carriers. Solid dispersions showed a remarkable enhancement in the dissolution rate of the drug. In the present research work, the solid dispersions were formulated in to fast dissolving tablets. The prepared tablets were evaluated for hardness, friability, drug content, disintegration time and the in vitro dissolution rate. The solid dispersions were characterized by Fourier Transform Infrared Spectroscopy (FTIR), differential scanning calorimetry (DSC) and thermo-gravimetric analysis (TGA). The DSC study revealed a marked reduction in the crystallinity of the drug. The faster dissolution rate of the solid dispersion is attributed to a marked reduction in the crystallinity of the drug. The FTIR and DSC studies demonstrated the absence of drug-polymer interaction. The formulated tablet (F2) achieved a 7 fold faster dissolution rate compared to the marketed tablet.

Influence of β-Cyclodextrin and Hydroxypropyl-β-Cyclodextrin on Enhancement of Solubility and Dissolution of Isradipine

2017 ◽  
Vol 10 (3) ◽  
pp. 3752-3757
Author(s):  
Narendar D ◽  
Ettireddy S
Keyword(s):  
Inclusion Complex ◽  
Dissolution Rate ◽  
Solid Dispersions ◽  
Physical Stability ◽  
Molecular Complexes ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Phase Solubility ◽  
Cyclodextrin Complexation

The content of this investigation was to study the influence of β-cyclodextrin and hydroxy propyl-β-cyclodextrin complexation on enhancement of solubility and dissolution rate of isradipine. Based on preliminary phase solubility studies, solid complexes prepared by freeze drying method in 1:1 molar ratio were selected and characterized by DSC for confirmation of complex formation. Prepared solid dispersions were evaluated for drug content, solubility and in vitro dissolution. The physical stability of optimized formulation was studied at refrigerated and room temperature for 2 months. Solid state characterization of optimized complex performed by DSC and XRD studies.  Dissolution rate of isradipine was increased compared with pure drug and more with HP-β-CD inclusion complex than β-CD. DSC and XRD analyzes that drug was in amorphous form, when the drug was incorporated as isradipine β-CD and HP-β-CD inclusion complex. Stability studies resulted in low or no variations in the percentage of complexation efficiency suggesting good stability of molecular complexes. The results conclusively demonstrated that the enhancement of solubility and dissolution rate of isradipine by drug-cyclodextrin complexation was achieved.   

scholarly journals Studying the Complex Formation of Sulfonatocalix[4]naphthalene and Meloxicam towards Enhancing Its Solubility and Dissolution Performance

Pharmaceutics ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 994
Author(s):  
Tayel Al Hujran ◽  
Mousa Magharbeh ◽  
Samer Al-Gharabli ◽  
Rula Haddadin ◽  
Manal Al Soub ◽  
...  
Keyword(s):  
Inclusion Complex ◽  
Dissolution Rate ◽  
Physical Mixture ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Solubility Study ◽  
Solubility Behavior ◽  
Ft Ir

The interaction between meloxicam and sulfonatocalix [4] naphthalene was investigated to improve the meloxicam solubility and its dissolution performance. Solubility behavior was investigated in distilled water (DW) and at different pH conditions. Besides, solid systems were prepared in a 1:1 molar ratio using coevaporate, kneading, and simple physical mixture techniques. Further, they were characterized by PXRD, FT-IR, DCS, and TGA. In vitro dissolution rate for coevaporate, kneaded, and physical mixture powders were also investigated. Solubility study revealed that meloxicam solubility significantly increased about 23.99 folds at phosphate buffer of pH 7.4 in the presence of sulfonatocalix [4] naphthalene. The solubility phase diagram was classified as AL type, indicating the formation of 1:1 stoichiometric inclusion complex. PXRD, FT-IR, DCS, and TGA pointed out the formation of an inclusion complex between meloxicam and sulfonatocalix [4] naphthalene solid powders prepared using coevaporate technique. In addition, in vitro meloxicam dissolution studies revealed an improvement of the drug dissolution rate. Furthermore, a significantly higher drug release (p ≤ 0.05) and a complete dissolution was achieved during the first 10 min compared with the other solid powders and commercial meloxicam product. The coevaporate product has the highest increasing dissolution fold and RDR10 in the investigated media, with average values ranging from 5.4–65.28 folds and 7.3–90.7, respectively. In conclusion, sulfonatocalix [4] naphthalene is a promising host carrier for enhancing the solubility and dissolution performance of meloxicam with an anticipated enhanced bioavailability and fast action for acute and chronic pain disorders.

Formulation and Evaluation of Nanosuspension of Simvastatin

2015 ◽  
Vol 8 (2) ◽  
pp. 2858-2873
Author(s):  
Rupali L. Shid ◽  
Shashikant N. Dhole ◽  
Nilesh Kulkarni ◽  
Santosh L Shid
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Factorial Design ◽  
Dissolution Rate ◽  
In Vitro Dissolution ◽  
Total Drug ◽  
23 Factorial Design ◽  
Rate Of Dissolution

Poor water solubility and slow dissolution rate are issues for the majority of upcoming and existing biologically active compounds. Simvastatin is poorly water-soluble drug and its bioavailability is very low from its crystalline form. The purpose of this study wasto increase the solubility and dissolution rate of simvastatin by the  preparation of nanosuspension by emulsification solvent diffusion method at laboratory scale. Prepared nanosus-pension was evaluated for its particle size and in vitro dissolution study and characterized by zeta potential,differential scanning calorimetry (DSC) and X-Ray diffractometry (XRD), motic digital microscopy, entrapment efficiency, total drug content, saturated solubility study and in vivo study. A 23 factorial design was employed to study the effect of independent variables, amount of SLS (X1), amount of PVPK-30 (X2) and poloxamer-188 (X3) and dependent variables are total drug content and polydispersity Index. The obtained results showed that particle size (nm) and rate of dissolution has been improved when nanosuspension prepared with the higherconcentration of PVPK-30 with the higher concentration of PVP K-30 and Poloxamer-188 and lower concentration of SLS. The particle size and zeta potential of optimized formulation was found to be 258.3 nm and 23.43. The rate of dissolution of the optimized nanosuspension was enhanced (90% in 60min), relative to plain simvastatin  (21% in 60 min), mainly due to the formation of nanosized particles. These results indicate the suitability of 23 factorial  design for preparation of simvastatin loaded nano-suspension significantly improved in vitro dissolution rate and thus possibly enhance fast onset of therapeutic drug effect. In vivo study shows increase in bioavailability in nanosuspension formulation than the plain simvastatin drug.

Complexation with Hydroxypropyl-gama-Cyclodextrin of Birch Tree Extract Physico-chemical Characterisation of their Binary Products

2008 ◽  
Vol 59 (6) ◽  
Author(s):  
Codruta Soica ◽  
Cristina A. Dehelean ◽  
Valentin Ordodi ◽  
Diana Antal ◽  
Vicentiu Vlaia
Keyword(s):  
Inclusion Complexes ◽  
Water Solubility ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Bark Extract ◽  
Birch Bark ◽  
Preparation Methods ◽  
Birch Tree ◽  
Physico Chemical

Birch bark contains important pentacyclic triterpens that determine an anticancer, anti-inflammatory and antiviral activity. The compounds can be extracted by simple procedures with organic solvents. The major problem of this type of triterpens is their low water solubility which can be increased by physical procedures like cyclodextrin complexation. The aim of present study was to analyse the products between birch bark extract and hydroxypropyl-g -cyclodextrin. Hydroxypropyl-g -cyclodextrin (HPGCD) was used as a host to improve its solubility in water, via inclusion complex formation. In order to obtain the inclusion complexes, 1:2 molar ratio and two preparation methods (physical mixing, kneading) were used. The inclusion complexes were analyzed by in vitro dissolution tests, thermal analysis and X-ray diffraction.

scholarly journals Optimization of sunflower head pectin extraction by ammonium oxalate and the effect of drying conditions on properties

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Xuemei Ma ◽  
Jiayi Yu ◽  
Jing Jing ◽  
Qian Zhao ◽  
Liyong Ren ◽  
...  
Keyword(s):  
High Performance ◽  
Freeze Drying ◽  
Antioxidant Activities ◽  
Structural Characteristics ◽  
Radical Scavenging ◽  
Ammonium Oxalate ◽  
Extraction Process ◽  
Size Exclusion ◽  
Pharmaceutical Industries

AbstractPectin is a kind of natural and complex carbohydrates which is extensively used in food, chemical, cosmetic, and pharmaceutical industries. Fresh sunflower (Helianthus annuus L.) heads were utilized as a novel source of pectin extracted by ammonium oxalate. The conditions of the extraction process were optimized implementing the response surface methodology. Under optimal extraction parameters (extraction time 1.34 h, liquid–solid ratio 15:1 mL/g, ammonium oxalate concentration 0.76% (w/v)), the maximum experimental yield was 7.36%. The effect of spray-drying and freeze-drying on the physiochemical properties, structural characteristics, and antioxidant activities was investigated by FT-IR spectroscopy, high performance size exclusion chromatography, and X-ray diffraction. The results showed freeze-drying lead to decrease in galacturonic acid (GalA) content (76.2%), molecular weight (Mw 316 kDa), and crystallinity. The antioxidant activities of pectin were investigated utilizing the in-vitro DPPH and ABTS radical-scavenging systems. This study provided a novel and efficient extraction method of sunflower pectin, and confirmed that different drying processes had an effect on the structure and properties of pectin.

scholarly journals Enrichment of aqueous solubility and dissolution profile of mesalamine: In vitro evaluation of solid dispersion

2021 ◽  
Vol 9 (2) ◽  
pp. 127-135
Author(s):  
Anil Raosaheb Pawar ◽  
Pralhad Vitthalrao Mundhe ◽  
Vinayak Kashinath Deshmukh ◽  
Ramdas Bhanudas Pandhare ◽  
Tanaji Dilip Nandgude
Keyword(s):  
Ulcerative Colitis ◽  
Drug Release ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Peg 4000

The aim of the present study was to formulate solid dispersion (SD) of Mesalamine to enrich the aqueous solubility and dissolution rate. Mesalamine is used in the management of acute ulcerative colitis and for the prevention of relapse of active ulcerative colitis. In the present study, Solid dispersion of Mesalamine was prepared by Fusion and Solvent evaporation method with different polymers. SD’s were characterized by % practical yield, drug content, Solubility, FT-IR, PXRD (Powder X- ray diffractometry), SEM (Scanning electron microscopy), in vitro dissolution studies and Stability studies. The percent drug release of prepared solid dispersion of Mesalamine by fusion and solid dispersion method (FM47, FM67, SE47 and SE67) in 1:7 ratio was found 81.36±0.41, 86.29±0.64, 82.45±0.57and 87.25±1.14 respectively. The aqueous solubility and percent drug release of solid dispersion of Mesalamine by both methods was significantly increased. The PXRD demonstrated that there was a significant decrease in crystallinity of pure drug present in the solid dispersions, which resulted in an increased aqueous solubility and dissolution rate of Mesalamine.The significant increase in aqueous solubility and dissolution rate of Mesalamine was observed in solid dispersion as the crystallinity of the drug decreased, absence of aggregation and agglomeration, increased wetability and good dispersibility after addition of PEG 4000 and PEG 6000.

EFFECT OF DRUG TO B-CYCLODEXTRIN RATIO AND METHOD OF COMPLEXATION IN THE DEVELOPMENT OF B-CYCLODEXTRIN INCLUSION COMPLEX OF OFLOXACIN

INDIAN DRUGS ◽  
2013 ◽  
Vol 50 (12) ◽  
pp. 34-40
Author(s):  
M Panchpuri ◽  
◽  
D Singh ◽  
A Semalty ◽  
M. Semalty
Keyword(s):  
Inclusion Complex ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Dissolution Study ◽  
Drug Content ◽  
Kneading Method ◽  
Made In

Ofloxacin, a second generation fluoroquinolone, shows poor aqueous solubility and dissolution profile. Thus, ofloxacin–β-cyclodextrin complexes were prepared to improve its dissolution by imparting an environment of improved hydrophilicity. Ofloxacin was complexed with β-cyclodextrin (in 1:1 and 1:2 molar ratio) by two different methods namely, solvent evaporation and kneading method. These inclusion complexes were evaluated for solubility, drug content, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X ray powder diffraction (XRPD) and in vitro dissolution study. The highest drug content (35.45%) was found in complex made by kneading method (OK1:1) in 1:1 molar ratio. All the complexes OSE1:1, OSE1:2, OK1:1, OK1:2 were found to be showing rough and porous surface morphology in SEM. Solubility as well as the dissolution of the complexes was found to be improved. Complex prepared by kneading method in 1:1 molar ratio (OK1:1) showed a marked improvement in percent drug release (88.94%) than that of pure drug (54.22%) at the end of 1 hour in dissolution study. FTIR, DSC and XRPD data confirmed the formation of inclusion complex. It was concluded that the complex made in 1:1 molar ratio (irrespective of the method) showed better solubility and dissolution profile as compared to complex made in 1:2 molar ratio.

Sign in / Sign up

Export Citation Format

Share Document