scholarly journals High-Frequency Fatigue Testing of Recycled Aggregate Concrete

2019 ◽  
Vol 10 (1) ◽  
pp. 10 ◽  
Author(s):  
Jose Sainz-Aja ◽  
Carlos Thomas ◽  
Juan A. Polanco ◽  
Isidro Carrascal
Keyword(s):  
Resonance Frequency ◽  
High Frequency ◽  
Fatigue Testing ◽  
Offshore Structures ◽  
Recycled Aggregate Concrete ◽  
Test Method ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Test Machine ◽  
Testing Time

Concrete fatigue behaviour has not been extensively studied, in part because of the difficulty and cost. Some concrete elements subjected to this type of load include the railway superstructure of sleepers or slab track, bridges for both road and rail traffic and the foundations of wind turbine towers or offshore structures. In order to address fatigue problems, a methodology was proposed that reduces the lengthy testing time and high cost by increasing the test frequency up to the resonance frequency of the set formed by the specimen and the test machine. After comparing this test method with conventional frequency tests, it was found that tests performed at a high frequency (90 ± 5 Hz) were more conservative than those performed at a moderate frequency (10 Hz); this effect was magnified in those concretes with recycled aggregates coming from crushed concrete (RC-S). In addition, it was found that the resonance frequency of the specimen–test machine set was a parameter capable of identifying whether the specimen was close to failure.

Study of Surface Modification of Recycled Aggregate and Mechanical Properties of the Resulting Concrete

2013 ◽  
Vol 712-715 ◽  
pp. 961-965
Author(s):  
Shu Qing Yang ◽  
Ting Peng ◽  
Wai Ching Tang ◽  
Hong Zhi Cui
Keyword(s):  
Mechanical Properties ◽  
Surface Modification ◽  
Performance Test ◽  
Test Methods ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Test Method ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Aggregate Concrete

In this paper, a method of aggregate surface modification using cement paste with RLP (Redispersable Latex Powder) was proposed aiming to improve properties of recycled aggregates and the resulting concrete. In this study, the cement pastes with different dosages of RLP on RA surface modification were used and the effects on the mechanical properties of the resulting concretes were studied. The experiments were carried in accordance with specifications and test methods in Building pebble and gravel (GB/T 14685-2001) and Ordinary concrete mechanics performance test method standard (GB/T 50081-2002). The test results showed that the properties of recycled aggregates were not as good as those of natural aggregates, thus resulting in poorer mechanical properties of the recycled aggregate concrete. By means of aggregate surface modification, the values of water absorption of the recycled aggregate were reduced and consequently the mechanical properties (i.e. compressive strength and elastic modulus) of the resulting recycled concrete were increased. This research provides some useful practical insights to improving mechanical properties of recycled aggregate concrete.

scholarly journals Discrete Element Simulation Analysis of Biaxial Mechanical Properties of Concrete with Large-Size Recycled Aggregate

2021 ◽  
Vol 13 (13) ◽  
pp. 7498
Author(s):  
Tan Li ◽  
Jianzhuang Xiao
Keyword(s):  
Mechanical Properties ◽  
Stress State ◽  
Strain Curve ◽  
Confining Pressure ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Aggregate Model ◽  
Large Size

Concrete made with large-size recycled aggregates is a new kind of recycled concrete, where the size of the recycled aggregate used is 25–80 mm, which is generally three times that of conventional aggregate. Thus, its composition and mechanical properties are different from that of conventional recycled concrete and can be applied in large-volume structures. In this study, recycled aggregate generated in two stages with randomly distributed gravels and mortar was used to replace the conventional recycled aggregate model, to observe the internal stress state and cracking of the large-size recycled aggregate. This paper also investigated the mechanical properties, such as the compressive strength, crack morphology, and stress–strain curve, of concrete with large-size recycled aggregates under different confining pressures and recycled aggregate incorporation ratios. Through this research, it was found that when compared with conventional concrete, under the confining pressure, the strength of large-size recycled aggregate concrete did not decrease significantly at the same stress state, moreover, the stiffness was increased. Confining pressure has a significant influence on the strength of large-size recycled aggregate cocrete.

scholarly journals Axial Stress-Strain Performance of Recycled Aggregate Concrete Reinforced with Macro-Polypropylene Fibres

2021 ◽  
Vol 13 (10) ◽  
pp. 5741
Author(s):  
Muhammad Junaid Munir ◽  
Syed Minhaj Saleem Kazmi ◽  
Yu-Fei Wu ◽  
Xiaoshan Lin ◽  
Muhammad Riaz Ahmad
Keyword(s):  
Axial Stress ◽  
Peak Stress ◽  
Polypropylene Fibre ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Peak Strain ◽  
Stress Strain ◽  
Polypropylene Fibres ◽  
Aggregate Concrete

The addition of macro-polypropylene fibres improves the stress-strain performance of natural aggregate concrete (NAC). However, limited studies focus on the stress-strain performance of macro-polypropylene fibre-reinforced recycled aggregate concrete (RAC). Considering the variability of coarse recycled aggregates (CRA), more studies are needed to investigate the stress-strain performance of macro-polypropylene fibre-reinforced RAC. In this study, a new type of 48 mm long BarChip macro-polypropylene fibre with a continuously embossed surface texture is used to produce BarChip fibre-reinforced NAC (BFNAC) and RAC (BFRAC). The stress-strain performance of BFNAC and BFRAC is studied for varying dosages of BarChip fibres. Results show that the increase in energy dissipation capacity (i.e., area under the curve), peak stress, and peak strain of samples is observed with an increase in fibre dosage, indicating the positive effect of fibre addition on the stress-strain performance of concrete. The strength enhancement due to the addition of fibres is higher for BFRAC samples than BFNAC samples. The reduction in peak stress, ultimate strain, toughness and specific toughness of concrete samples due to the utilisation of CRA also reduces with the addition of fibres. Hence, the negative effect of CRA on the properties of concrete samples can be minimised by adding BarChip macro-polypropylene fibres. The applicability of the stress-strain model previously developed for macro-synthetic and steel fibre-reinforced NAC and RAC to BFNAC and BFRAC is also examined.

scholarly journals Effects of Recycled Aggregate Resin (RAR) in Concrete Material

2020 ◽  
Vol 11 (2) ◽  
Author(s):  
Sharifah Salwa Mohd Zuki ◽  
◽  
Shahiron Shahidan ◽  
Shivaraj Subramaniam ◽  
◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Engineering Properties ◽  
Recycled Aggregates ◽  
Hardened Concrete ◽  
Demolition Waste ◽  
Split Tensile Strength ◽  
Close Proximity

This paper discussed the recycled aggregates produced from construction and demolition waste and their utilization in concrete construction. Along with a brief overview of the engineering properties of recycled aggregates, the paper also summarizes the effect and use of recycled aggregates on the properties of fresh and hardened concrete. The recycled aggregates were treated with epoxy resin to reduce the water absorptions with different percentages of resin such as 0%, 25%, 50%, 75%, and 100%. Epoxy resin is widely used in recent years owing to the enhancing of mechanical and durability of the concrete. This research also showed, recycled aggregate concrete are close proximity to normal concrete in terms of split tensile strength, compression strength and wet density. The low usage of resin was obtained good strength concrete compared to high percentage contained treated aggregates due to low bonding between material.

scholarly journals MECHANICAL PROPERTIES OF RECYCLED AGGREGATE CONCRETE WITH STEEL FIBER: A REVIEW

2019 ◽  
Vol 26 (3) ◽  
pp. 37-42
Author(s):  
Ashtar S. Al-Luhybi
Keyword(s):  
Mechanical Properties ◽  
Steel Fiber ◽  
Recycled Aggregate Concrete ◽  
Strength Characteristics ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Aggregate Concrete ◽  
Building Process

In the building process, the recycling of aggregates arising from building and demolition debris is one of the best alternatives to maintain the environment and the areas needed to bury these debris. It also helps to preserve natural concrete sources from depletion efficiently. The use of recycled aggregates in new concrete manufacturing, however, leads to a decrease in concrete\\\’s strength characteristics. This reduction rises with the rise in the percentage of recycled aggregates used in concrete, which has caused many researchers to undertake many researches on how to enhance the characteristics of recycled aggregate-containing concrete. This paper presents several studies that examined the effect of adding steel fiber to improve the properties of concrete containing a coarse recycled aggregate.

Shear strength of interfaces in natural and in recycled aggregate concrete

2017 ◽  
Vol 44 (3) ◽  
pp. 212-222
Author(s):  
Shakeel Ahmad Waseem ◽  
Bhupinder Singh
Keyword(s):  
Shear Strength ◽  
Shear Plane ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Failure Envelope ◽  
Interface Shear ◽  
Aggregate Concrete ◽  
Normal Strength ◽  
Strength Models

Shear strength of interfaces in natural aggregate concrete and in recycled aggregate concrete has been investigated using initially uncracked push-off specimens by varying the following parameters: replacement level of the recycled aggregates (0%, 50%, and 100%), concrete grade (normal-strength and medium-strength), and clamping force on the shear plane. Development of truss action for resisting interface shear was indicated by the observed crack patterns in the tested specimens and a truss-based analysis recommended in the literature in combination with a simplified failure envelope for concrete subjected to biaxial stresses has been used for shear strength predictions of the tested specimens. The proposed methodology, which is considered to be more rational than the empirical shear strength models available in the literature was calibrated for both the concrete types and gave conservative and reasonably accurate shear strength predictions for selected experiments taken from the literature.

scholarly journals Failure risk of recycled aggregates concrete

2019 ◽  
Vol 281 ◽  
pp. 01017
Author(s):  
Frédéric Grondin ◽  
Menghuan Guo ◽  
Emmanuel Rozière ◽  
Ahmed Loukili
Keyword(s):  
Correlation Method ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Structural Class ◽  
The Sustainable Development ◽  
Failure Risk ◽  
Development Context ◽  
Cracking Process

In the sustainable development context, the use of demolition waste increases in the building industry. Recycled aggregates from the demolition of concrete structures are then mixed in new concrete. Furthermore, the performance evaluation of a these recycled aggregate concrete (RAC) mix is not only limited to the determination of its conventional mechanical properties. The failure risk of concrete elements in structures made from RAC needs a comprehensive analysis. For that, a study on the fracture process of RAC has been performed and compared with that of normal concrete of the same structural class. Acoustic emission technique and digital correlation method have been used to follow the cracking process. Also, a new modelling approach for the fracture behaviour of RAC at the mesoscopic scale has been developed. It has taken into account the old attached mortar surrounding recycled aggregates. Results show that RAC has a more brittle behaviour than ordinary concrete and the numerical analysis shows that cracks growth through the recycled aggregates which have brittleness behaviour.

scholarly journals Sulfate Resistance of Recycled Aggregate Concrete with GGBS and Fly Ash-Based Geopolymer

Materials ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1247 ◽  
Author(s):  
Jianhe Xie ◽  
Jianbai Zhao ◽  
Junjie Wang ◽  
Chonghao Wang ◽  
Peiyan Huang ◽  
...  
Keyword(s):  
Fly Ash ◽  
Construction Projects ◽  
High Performance ◽  
High Performance Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Aggregate Concrete ◽  
Sulfate Resistance ◽  
Coarse Aggregates

There is a constant drive for the development of ultra-high-performance concrete using modern green engineering technologies. These concretes have to exhibit enhanced durability and incorporate energy-saving and environment-friendly functions. The object of this work was to develop a green concrete with an improved sulfate resistance. In this new type of concrete, recycled aggregates from construction and demolition (C&D) waste were used as coarse aggregates, and granulated blast furnace slag (GGBS) and fly ash-based geopolymer were used to totally replace the cement in concrete. This study focused on the sulfate resistance of this geopolymer recycled aggregate concrete (GRAC). A series of measurements including compression, X-ray diffraction (XRD), and scanning electron microscopy (SEM) tests were conducted to investigate the physical properties and hydration mechanisms of the GRAC after different exposure cycles in a sulfate environment. The results indicate that the GRAC with a higher content of GGBS had a lower mass loss and a higher residual compressive strength after the sulfate exposure. The proposed GRACs, showing an excellent sulfate resistance, can be used in construction projects in sulfate environments and hence can reduce the need for cement as well as the disposal of C&D wastes.

scholarly journals Studies on Hemp and Recycled Aggregate Concrete

2020 ◽  
Vol 14 (1) ◽  
Author(s):  
Samer Ghosn ◽  
Nour Cherkawi ◽  
Bilal Hamad
Keyword(s):  
Mechanical Properties ◽  
Fiber Length ◽  
Plain Concrete ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Silane Treatment ◽  
Hemp Fiber ◽  
Fiber Treatment

Abstract This paper reports on the first phase of a multi-phase research program conducted at the American University of Beirut (AUB) on “Hemp and Recycled Aggregates Concrete” (HRAC). HRAC is a new sustainable concrete material where hemp fibers are incorporated in the mix, the coarse aggregate content is reduced by 20% of the concrete volume, and 50% of the natural coarse aggregates (NCA) are replaced by recycled concrete aggregates (RCA), thus saving on natural resources and addressing the problem of waste material disposal. The effect of the new material on concrete consistency and hardened mechanical properties was studied. Also, few durability tests were conducted. Variables included percentage replacement of NCA by RCA (0 or 50%), maximum size aggregate (10 or 20 mm), hemp fiber length (20 or 30 mm), and hemp fiber treatment (alkali or silane or acetyl). Fiber characterization tests were conducted including morphology, crystallinity, and thermal analysis. The tests indicated that alkali and acetyl fiber treatments were better than the silane treatment in removing impurities on the fiber surface. Also, alkali and acetyl treatments have increased the crystallinity of the fibers while silane treatment decreased it. Results of mechanical properties tests showed that while HRAC has considerable lower compressive strength and modulus of elasticity than plain concrete, the flexural strength and splitting tensile strength are not significantly affected. The flexural stress–strain behavior of HRAC is ductile as compared to the brittle behavior of the plain concrete beams indicating positive impact on toughness and energy dissipation. The durability tests indicated that whereas HRAC mixes have higher absorption than plain concrete, they have better thermal properties and their resistance to freeze–thaw cycles is comparable to plain concrete. All test results were not significantly affected by fiber length or fiber treatment.

Sign in / Sign up

Export Citation Format

Share Document