scholarly journals Numerical Evaluation of the Transient Performance of Rock-Pile Seasonal Thermal Energy Storage Systems Coupled with Exhaust Heat Recovery

2020 ◽  
Vol 10 (21) ◽  
pp. 7771
Author(s):  
Leyla Amiri ◽  
Marco Antonio Rodrigues de Brito ◽  
Seyed Ali Ghoreishi-Madiseh ◽  
Navid Bahrani ◽  
Ferri P. Hassani ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Waste Heat ◽  
Fluid Velocity ◽  
Transfer Model ◽  
Mining Operations ◽  
Exhaust Heat ◽  
Wide Range

This study seeks to investigate the concept of using large waste rocks from mining operations as waste-heat thermal energy storage for remote arctic communities, both commercial and residential. It holds its novelty in analyzing such systems with an experimentally validated transient three-dimensional computational fluid dynamics and heat transfer model that accounts for interphase energy balance using a local thermal non-equilibrium approach. The system performance is evaluated for a wide range of distinct parameters, such as porosity between 0.2 and 0.5, fluid velocity from 0.01 to 0.07 m/s, and the aspect ratio of the bed between 1 and 1.35. It is demonstrated that the mass flow rate of the heat transfer fluid does not expressively impact the total energy storage capacity of the rock mass, but it does significantly affect the charge/discharge times. Finally, it is shown that porosity has the greatest impact on both fluid flow and heat transfer. The evaluations show that about 540 GJ can be stored on the bed with a porosity of 0.2, and about 350 GJ on the one with 0.35, while the intermediate porosity leads to a total of 450 GJ. Additionally, thermal capacity is deemed to be the most important thermophysical factor in thermal energy storage performance.

New Thermal Energy Storage Materials From Industrial Wastes: Compatibility of Steel Slag With the Most Common Heat Transfer Fluids

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Iñigo Ortega-Fernández ◽  
Javier Rodríguez-Aseguinolaza ◽  
Antoni Gil ◽  
Abdessamad Faik ◽  
Bruno D’Aguanno
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Steel Slag ◽  
Industrial Wastes ◽  
Energy Storage Materials ◽  
Iron And Steel ◽  
Heat Transfer Fluids ◽  
Wide Range

Slag is one of the main waste materials of the iron and steel manufacturing. Every year about 20 × 106 tons of slag are generated in the U.S. and 43.5 × 106 tons in Europe. The valorization of this by-product as heat storage material in thermal energy storage (TES) systems has numerous advantages which include the possibility to extend the working temperature range up to 1000 °C, the reduction of the system cost, and at the same time, the decrease of the quantity of waste in the iron and steel industry. In this paper, two different electric arc furnace (EAF) slags from two companies located in the Basque Country (Spain) are studied. Their thermal stability and compatibility in direct contact with the most common heat transfer fluids (HTFs) used in the concentrated solar power (CSP) plants are analyzed. The experiments have been designed in order to cover a wide range of temperature up to the maximum operation temperature of 1000 °C corresponding to the future generation of CSP plants. In particular, three different fluids have been studied: synthetic oil (Syltherm 800®) at 400 °C, molten salt (Solar Salt) at 500 °C, and air at 1000 °C. In addition, a complete characterization of the studied slags and fluids used in the experiments is presented showing the behavior of these materials after 500 hr laboratory-tests.

High Temperature Latent-Heat Thermal Energy Storage Module With Enhanced Combined Mode Heat Transfer

2014 ◽  
Author(s):  
Antonio Ramos Archibold ◽  
Muhammad M. Rahman ◽  
D. Yogi Goswami ◽  
Elias L. Stefanakos
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Thermal Radiation ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Solid Phase ◽  
Radiant Energy ◽  
Convective Transport ◽  
Finite Volume Scheme ◽  
Transfer Model

A numerical solution of the melting problem of a semitransparent gray, medium contained in a closed heated spherical shell is presented in this study. The influence of all the fundamental energy transfer mechanisms on the melting dynamics of the phase change medium (PCM) has been analyzed, in order to extend the convectional natural convection-dominated model and to expand the limited literature in the thermal energy storage (TES) area at high operating temperatures (>800°C). A two-dimensional, axisymmetric, transient model has been solved numerically. The discrete ordinate method was used to solve the equation of radiative transfer and the finite volume scheme was used to solve the equations for mass, momentum and energy conservation. The effect of the optical thickness of the medium on the melt fraction rate, total and radiative heat transfer rates at the inner surface of the shell has been analyzed and discussed. Also the influence of thermal radiation has been quantified by performing comparisons between the pure conduction and the simultaneous conduction and radiation models. The results showed that the presence of thermal radiation enhances the melting process, particularly during the solid phase sensible heating process in the multi-mode heat transfer model. Also, it was found that the contribution of the radiant energy exchange is one order of magnitude smaller than the convective transport process.

scholarly journals Latent Heat Phase Change Heat Transfer of a Nanoliquid with Nano–Encapsulated Phase Change Materials in a Wavy-Wall Enclosure with an Active Rotating Cylinder

2021 ◽  
Vol 13 (5) ◽  
pp. 2590
Author(s):  
S. A. M. Mehryan ◽  
Kaamran Raahemifar ◽  
Leila Sasani Gargari ◽  
Ahmad Hajjar ◽  
Mohamad El Kadri ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Latent Heat ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Wavy Wall ◽  
Governing Equations ◽  
Stefan Number ◽  
Change Material

A Nano-Encapsulated Phase-Change Material (NEPCM) suspension is made of nanoparticles containing a Phase Change Material in their core and dispersed in a fluid. These particles can contribute to thermal energy storage and heat transfer by their latent heat of phase change as moving with the host fluid. Thus, such novel nanoliquids are promising for applications in waste heat recovery and thermal energy storage systems. In the present research, the mixed convection of NEPCM suspensions was addressed in a wavy wall cavity containing a rotating solid cylinder. As the nanoparticles move with the liquid, they undergo a phase change and transfer the latent heat. The phase change of nanoparticles was considered as temperature-dependent heat capacity. The governing equations of mass, momentum, and energy conservation were presented as partial differential equations. Then, the governing equations were converted to a non-dimensional form to generalize the solution, and solved by the finite element method. The influence of control parameters such as volume concentration of nanoparticles, fusion temperature of nanoparticles, Stefan number, wall undulations number, and as well as the cylinder size, angular rotation, and thermal conductivities was addressed on the heat transfer in the enclosure. The wall undulation number induces a remarkable change in the Nusselt number. There are optimum fusion temperatures for nanoparticles, which could maximize the heat transfer rate. The increase of the latent heat of nanoparticles (a decline of Stefan number) boosts the heat transfer advantage of employing the phase change particles.

scholarly journals Experimental and Computational Investigations of Phase Change Thermal Energy Storage Canisters

2000 ◽  
Vol 122 (4) ◽  
pp. 176-182 ◽  
Author(s):  
Mounir Ibrahim ◽  
Pavel Sokolov ◽  
Thomas Kerslake ◽  
Carol Tolbert
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Radiation Heat Transfer ◽  
Convection Heat Transfer ◽  
Melting Time ◽  
Radiation Heat ◽  
Space Experiments

Two sets of experimental data for cylindrical canisters with thermal energy storage applications were examined in this paper: 1) Ground Experiments and 2) Space Experiments. A 2-D computational model was developed for unsteady heat transfer (conduction and radiation) with phase-change. The radiation heat transfer employed a finite volume method. The following was found in this study: 1) Ground Experiments, the convection heat transfer is equally important to that of the radiation heat transfer; Radiation heat transfer in the liquid is found to be more significant than that in the void; Including the radiation heat transfer in the liquid resulted in lower temperatures (about 15 K) and increased the melting time (about 10 min.); Generally, most of the heat flow takes place in the radial direction. 2) Space Experiments, Radiation heat transfer in the void is found to be more significant than that in the liquid (exactly the opposite to the Ground Experiments); Accordingly, the location and size of the void affects the performance considerably; Including the radiation heat transfer in the void resulted in lower temperatures (about 40 K). [S0199-6231(00)00304-X]

Effect of High Temperatures and Heating Rates on High Strength Concrete for Use as Thermal Energy Storage

2010 ◽  
Author(s):  
Emerson E. John ◽  
W. Micah Hale ◽  
R. Panneer Selvam
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Molten Salt ◽  
High Temperatures ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Heat Transfer Fluid ◽  
Heating Rates ◽  
Storage Media ◽  
Concrete Mixtures

In recent years due to rising energy costs as well as an increased interest in the reduction of greenhouse gas emissions, there is great interest in developing alternative sources of energy. One of the most viable alternative energy resources is solar energy. Concentrating solar power (CSP) technologies have been identified as an option for meeting utility needs in the U.S. Southwest. Areas where CSP technologies can be improved are improved heat transfer fluid (HTF) and improved methods of thermal energy storage (TES). One viable option for TES storage media is concrete. The material costs of concrete can be very inexpensive and the costs/ kWhthermal, which is based on the operating temperature, are reported to be approximately $1. Researchers using concrete as a TES storage media have achieved maximum operating temperatures of 400°C. However, there are concerns for using concrete as the TES medium, and these concerns center on the effects and the limitations that the high temperatures may have on the concrete. As the concrete temperature increases, decomposition of the calcium hydroxide (CH) occurs at 500°C, and there is significant strength loss due to degeneration of the calcium silicate hydrates (C-S-H). Additionally concrete exposed to high temperatures has a propensity to spall explosively. This proposed paper examines the effect of heating rates on high performance concrete mixtures. Concrete mixtures with water to cementitious material ratios (w/cm) of 0.15 to 0.30 and compressive strengths of up to 180 MPa (26 ksi) were cast and subjected to heating rates of 3, 5, 7, and 9° C/min. These concrete mixtures are to be used in tests modules where molten salt is used as the heat transfer fluid. Molten salt becomes liquid at temperatures exceeding 220°C and therefore the concrete will be exposed to high initial temperatures and subsequently at controlled heating rates up to desired operating temperatures. Preliminary results consistently show that concrete mixtures without polypropylene fibres (PP) cannot resist temperatures beyond 500° C, regardless of the heating rate employed. These mixtures spall at higher temperatures when heated at a faster rate (7° C/min). Additionally, mixtures which incorporate PP fibres can withstand temperatures up to 600° C without spalling irrespective of the heating rate.

Sign in / Sign up

Export Citation Format

Share Document