scholarly journals Techno-Economic Analysis of Grid-Connected PV and Fuel Cell Hybrid System Using Different PV Tracking Techniques

2020 ◽  
Vol 10 (23) ◽  
pp. 8515
Author(s):  
Saif Mubaarak ◽  
Delong Zhang ◽  
Yongcong Chen ◽  
Jinxin Liu ◽  
Longze Wang ◽  
...  
Keyword(s):  
Hybrid System ◽  
Energy Systems ◽  
Energy System ◽  
Vital Role ◽  
Pv System ◽  
Hybrid Energy ◽  
Cost Of Energy ◽  
System Components ◽  
Pv Generation

Solar energy has attracted the attention of researchers around the world due to its advantages. However, photovoltaic (PV) panels still have not attained the desired efficiency and economic mature. PV tracking techniques can play a vital role in improving the performance of the PV system. The aim of this paper is to evaluate and compare the technical and economic performance of grid-connected hybrid energy systems including PV and fuel cells (FC) by applying major types of PV tracking technique. The topology and design principles and technical description of hybrid system components are proposed in this paper. Moreover, this paper also introduces economic criteria, which are used to evaluate the economy of different PV tracking techniques and seek the optimal configuration of system components. In the case study, the results show that the vertical single axis tracker was ranked 1st in terms of highest PV generation, penetration of renewable energy to the grid, lowest CO2 emission, highest energy sold to the grid and lowest purchased, and lowest net present cost (NPC) and levelized cost of energy (LCOE). The study found that the optimal design of a grid-connected hybrid energy system (PV-FC) was by using a vertical single axis tracker which has the lowest NPC, LCOE.

scholarly journals Accessibility and Sustainability of Hybrid Energy Systems for a Cement Factory in Oman

2020 ◽  
Vol 13 (1) ◽  
pp. 93
Author(s):  
Wesam H. Beitelmal ◽  
Paul C. Okonkwo ◽  
Fadhil Al Housni ◽  
Wael Alruqi ◽  
Omar Alruwaythi
Keyword(s):  
Functional Limitations ◽  
Energy Systems ◽  
Energy System ◽  
Electricity Production ◽  
Diesel Generator ◽  
Hybrid Energy ◽  
Electric System ◽  
Cement Factory ◽  
Hybrid Energy Systems ◽  
Cost Of Energy

Diesel generators are being used as a source of electricity in different parts of the world. Because of the significant expense in diesels cost and the requirement for a greener domain, such electric generating systems appear not to be efficient and environmentally friendly and should be tended to. This paper explores the attainability of utilizing a sustainable power source based on a cross-breed electric system in the cement factory in Salalah, Oman. The HOMER software that breaks down the system setup was utilized to examine the application and functional limitations of each hybridized plan. The result showed that a renewable-energy (RE)-based system has a lower cost of energy (COE) and net present cost (NPC) compared to diesel generator-based hybrid electric and standalone systems. Although the two pure renewable hybrid energy systems considered in this study displayed evidence of no emissions, lower NPC and COE values are observed in the photovoltaic/battery (PV/B) hybrid energy system compared with photovoltaic/wind turbine/battery (PV/WT/B). The PV/WT/B and PV/B systems have higher electricity production and low NPC and COE values. Moreover, the PV/B has the highest return on investment (ROI) and internal rate of return (IRR), making the system the most economically viable and adjudged to be a better candidate for rural community electrification demands.

scholarly journals Techno-Economic and Environmental Assessment of the Hybrid Energy System Considering Electric and Thermal Loads

Electronics ◽  
2021 ◽  
Vol 10 (24) ◽  
pp. 3136
Author(s):  
Li-Ning Xing ◽  
Hong-Long Xu ◽  
Armin Kardan Sani ◽  
Md. Alamgir Hossain ◽  
S. M. Muyeen
Keyword(s):  
Greenhouse Gas Emission ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Optimal Operation ◽  
System Structure ◽  
Pv System ◽  
Hybrid Energy System ◽  
Hybrid Energy ◽  
Cost Of Energy ◽  
Electric Loads

Optimal sizing of hybrid energy systems has been considerably investigated in previous studies. Nevertheless, most studies only focused on providing AC electric loads by renewable energy sources (RESs) and energy storage systems (ESSs). In this paper, a hybrid energy system, including photovoltaic (PV) system, ESS, fuel cell (FC), natural gas (NG) boiler, thermal load controller (TLC), and converter is optimized for supplying different load demands. Three scenarios are introduced to investigate the feasibility of the energy system. Environmental aspects of each system are analyzed, as there are NG-consuming sources in the system structure. A sensitivity analysis is conducted on the influential parameters of the system, such as inflation rate and interest rate. Simulation results show that the proposed hybrid energy system is economically and technically feasible. The net present cost (NPC) and cost of energy (COE) of the system are obtained at $230,223 and $0.0409, respectively. The results indicate that the TLC plays a key role in the optimal operation of the PV system and the reduction in greenhouse gas emission productions.

scholarly journals Composite Multi-Criteria Decision Analysis for Optimization of Hybrid Renewable Energy Systems for Geopolitical Zones in Nigeria

2020 ◽  
Vol 12 (14) ◽  
pp. 5732
Author(s):  
Michael O. Ukoba ◽  
Ogheneruona E. Diemuodeke ◽  
Mohammed Alghassab ◽  
Henry I. Njoku ◽  
Muhammad Imran ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Systems ◽  
Energy System ◽  
Solar Pv ◽  
Hybrid Energy ◽  
Electricity Cost ◽  
Hybrid Renewable Energy Systems ◽  
Cost Of Energy ◽  
Battery Energy ◽  
Hybrid Renewable Energy

This paper presents eight hybrid renewable energy (RE) systems that are derived from solar, wind and biomass, with energy storage, to meet the energy demands of an average household in the six geopolitical zones of Nigeria. The resource assessments show that the solar insolation, wind speed (at 30 m hub height) and biomass in the country range, respectively, from 4.38–6.00 kWh/m2/day, 3.74 to 11.04 m/s and 5.709–15.80 kg/household/day. The HOMER software was used to obtain optimal configurations of the eight hybrid energy systems along the six geopolitical zones’ RE resources. The eight optimal systems were further subjected to a multi-criteria decision making (MCDM) analysis, which considers technical, economic, environmental and socio-cultural criteria. The TOPSIS-AHP composite procedure was adopted for the MCDM analysis in order to have more realistic criteria weighting factors. In all the eight techno-economic optimal system configurations considered, the biomass generator-solar PV-battery energy system (GPBES) was the best system for all the geopolitical zones. The best system has the potential of capturing carbon from the atmosphere, an attribute that is desirous for climate change mitigation. The cost of energy (COE) was seen to be within the range of 0.151–0.156 US$/kWh, which is competitive with the existing electricity cost from the national grid, average 0.131 US$/kWh. It is shown that the Federal Government of Nigeria favorable energy policy towards the adoption of biomass-to-electricity systems would make the proposed system very affordable to the rural households.

scholarly journals Compensation Design Using RLS Algorithm for THD Reduction in a Solar PV Hybrid System

2019 ◽  
Vol 5 (11) ◽  
pp. 29-38
Author(s):  
Satyam Kumar Prasun ◽  
Sanjeev Jarariya ◽  
Avinash Kumar
Keyword(s):  
Energy Systems ◽  
Cost Effective ◽  
Energy System ◽  
Wave Form ◽  
Solar Pv ◽  
Rls Algorithm ◽  
Hybrid Energy ◽  
Cost Of Energy ◽  
Complementary Nature ◽  
Compensation Design

PV and wind hybrid are found to be the most lucrative solution for the diminishing traditional energy sources. Whereas these alternatives sources of the energy have many remarkable rewards like cost of energy and feasibility etc. The attributes of these sources of being cost effective and stable are possible due to their complementary nature as compared to independent energy systems. Therefore, these systems have admirable capability to meet energy crisis up to some extent. The proposed word has designed a hybrid energy system fit for driving residential loads using MATLAB/SIMULINK software. The work has proposed a compensator with RLS algorithm is place of traditional STATCOM device. The results has sown that the active power output available at the load terminal improved from 400 KW to 700KW. Also the work has analyzed THD level in voltage and current waveforms. The proposed RLS based compensator reduced the THD level in voltage to 0.81% and in current wave form to  1.26% . The model has also been integrated with the grid in order to make the system more reliable and efficient while driving loads

scholarly journals FPGA-Based Controller for a Hybrid Grid-Connected PV/Wind/Battery Power System with AC Load

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2108
Author(s):  
Mohamed Yassine Allani ◽  
Jamel Riahi ◽  
Silvano Vergura ◽  
Abdelkader Mami
Keyword(s):  
Fuzzy Logic ◽  
Hybrid System ◽  
High Voltage ◽  
Field Programmable Gate Arrays ◽  
Energy System ◽  
Maximum Power ◽  
Hybrid Energy ◽  
Gate Arrays ◽  
Field Programmable ◽  
Programmable Gate Arrays

The development and optimization of a hybrid system composed of photovoltaic panels, wind turbines, converters, and batteries connected to the grid, is first presented. To generate the maximum power, two maximum power point tracker controllers based on fuzzy logic are required and a battery controller is used for the regulation of the DC voltage. When the power source varies, a high-voltage supply is incorporated (high gain DC-DC converter controlled by fuzzy logic) to boost the 24 V provided by the DC bus to the inverter voltage of about 400 V and to reduce energy losses to maximize the system performance. The inverter and the LCL filter allow for the integration of this hybrid system with AC loads and the grid. Moreover, a hardware solution for the field programmable gate arrays-based implementation of the controllers is proposed. The combination of these controllers was synthesized using the Integrated Synthesis Environment Design Suite software (Version: 14.7, City: Tunis, Country: Tunisia) and was successfully implemented on Field Programmable Gate Arrays Spartan 3E. The innovative design provides a suitable architecture based on power converters and control strategies that are dedicated to the proposed hybrid system to ensure system reliability. This implementation can provide a high level of flexibility that can facilitate the upgrade of a control system by simply updating or modifying the proposed algorithm running on the field programmable gate arrays board. The simulation results, using Matlab/Simulink (Version: 2016b, City: Tunis, Country: Tunisia, verify the efficiency of the proposed solution when the environmental conditions change. This study focused on the development and optimization of an electrical system control strategy to manage the produced energy and to coordinate the performance of the hybrid energy system. The paper proposes a combined photovoltaic and wind energy system, supported by a battery acting as an energy storage system. In addition, a bi-directional converter charges/discharges the battery, while a high-voltage gain converter connects them to the DC bus. The use of a battery is useful to compensate for the mismatch between the power demanded by the load and the power generated by the hybrid energy systems. The proposed field programmable gate arrays (FPGA)-based controllers ensure a fast time response by making control executable in real time.

scholarly journals Dynamic Stability Enhancement of a Hybrid Renewable Energy System in Stand-Alone Applications

Computation ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 14
Author(s):  
Ezzeddine Touti ◽  
Hossem Zayed ◽  
Remus Pusca ◽  
Raphael Romary
Keyword(s):  
Renewable Energy ◽  
Energy Systems ◽  
Experimental Tests ◽  
Energy System ◽  
Induction Generator ◽  
Technical Solution ◽  
Hybrid Energy ◽  
Wind Speeds ◽  
Hybrid Renewable Energy System ◽  
Stability Enhancement

Renewable energy systems have been extensively developed and they are attractive to become widespread in the future because they can deliver energy at a competitive price and generally do not cause environmental pollution. However, stand-alone energy systems may not be practical for satisfying the electric load demands, especially in places having unsteady wind speeds with high unpredictability. Hybrid energy systems seem to be a more economically feasible alternative to satisfy the energy demands of several isolated clients worldwide. The combination of these systems makes it possible to guarantee the power stability, efficiency, and reliability. The aim of this paper is to present a comprehensive analysis and to propose a technical solution to integrate a self-excited induction generator in a low power multisource system. Therefore, to avoid the voltage collapsing and the machine demagnetization, the various parameters have to be identified. This procedure allows for the limitation of a safe operating area where the best stability of the machine can be obtained. Hence, the load variation interval is determined. An improvement of the induction generator stability will be analyzed. Simulation results will be validated through experimental tests.

scholarly journals Feasibility and techno-economic analysis of stand-alone and grid-connected PV/Wind/Diesel/Batt hybrid energy system: A case study

2021 ◽  
Vol 37 ◽  
pp. 100673
Author(s):  
Barun K. Das ◽  
Majed A. Alotaibi ◽  
Pronob Das ◽  
M.S. Islam ◽  
Sajal K. Das ◽  
...  
Keyword(s):  
Economic Analysis ◽  
Energy System ◽  
Hybrid Energy System ◽  
Hybrid Energy ◽  
System A

scholarly journals An Indicator-Based Approach for Analysing the Resilience of Transitions for Energy Regions. Part II: Empirical Application to the Case of Weiz-Gleisdorf, Austria

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2263 ◽  
Author(s):  
Romano Wyss ◽  
Susan Mühlemeier ◽  
Claudia Binder
Keyword(s):  
Path Length ◽  
Energy Systems ◽  
Energy System ◽  
Degree Centrality ◽  
Study Region ◽  
Regional Energy ◽  
Stabilization Phase ◽  
Full Picture ◽  
Regional Energy Systems

In this paper, we apply an indicator-based approach to measure the resilience of energy regions in transition to a case study region in Austria. The indicator-based approach allows to determine the resilience of the transition of regional energy systems towards higher shares of renewables and potentially overall higher sustainability. The indicators are based on two core aspects of resilience, diversity and connectivity. Diversity is thereby operationalized by variety, disparity and balance, whereas connectivity is operationalized by average path length, degree centrality and modularity. In order to get a full picture of the resilience of the energy system at stake throughout time, we apply the measures to four distinct moments, situated in the pre-development, take-off, acceleration and stabilization phase of the transition. By contextually and theoretically embedding the insights in the broader transitions context and empirically applying the indicators to a specific case, we derive insights on (1) how to interpret the results in a regional context and (2) how to further develop the indicator-based approach for future applications.

Sign in / Sign up

Export Citation Format

Share Document