scholarly journals Accessibility and Sustainability of Hybrid Energy Systems for a Cement Factory in Oman

2020 ◽  
Vol 13 (1) ◽  
pp. 93
Author(s):  
Wesam H. Beitelmal ◽  
Paul C. Okonkwo ◽  
Fadhil Al Housni ◽  
Wael Alruqi ◽  
Omar Alruwaythi
Keyword(s):  
Functional Limitations ◽  
Energy Systems ◽  
Energy System ◽  
Electricity Production ◽  
Diesel Generator ◽  
Hybrid Energy ◽  
Electric System ◽  
Cement Factory ◽  
Hybrid Energy Systems ◽  
Cost Of Energy

Diesel generators are being used as a source of electricity in different parts of the world. Because of the significant expense in diesels cost and the requirement for a greener domain, such electric generating systems appear not to be efficient and environmentally friendly and should be tended to. This paper explores the attainability of utilizing a sustainable power source based on a cross-breed electric system in the cement factory in Salalah, Oman. The HOMER software that breaks down the system setup was utilized to examine the application and functional limitations of each hybridized plan. The result showed that a renewable-energy (RE)-based system has a lower cost of energy (COE) and net present cost (NPC) compared to diesel generator-based hybrid electric and standalone systems. Although the two pure renewable hybrid energy systems considered in this study displayed evidence of no emissions, lower NPC and COE values are observed in the photovoltaic/battery (PV/B) hybrid energy system compared with photovoltaic/wind turbine/battery (PV/WT/B). The PV/WT/B and PV/B systems have higher electricity production and low NPC and COE values. Moreover, the PV/B has the highest return on investment (ROI) and internal rate of return (IRR), making the system the most economically viable and adjudged to be a better candidate for rural community electrification demands.

scholarly journals Techno-Economic Analysis of Grid-Connected PV and Fuel Cell Hybrid System Using Different PV Tracking Techniques

2020 ◽  
Vol 10 (23) ◽  
pp. 8515
Author(s):  
Saif Mubaarak ◽  
Delong Zhang ◽  
Yongcong Chen ◽  
Jinxin Liu ◽  
Longze Wang ◽  
...  
Keyword(s):  
Hybrid System ◽  
Energy Systems ◽  
Energy System ◽  
Vital Role ◽  
Pv System ◽  
Hybrid Energy ◽  
Cost Of Energy ◽  
System Components ◽  
Pv Generation

Solar energy has attracted the attention of researchers around the world due to its advantages. However, photovoltaic (PV) panels still have not attained the desired efficiency and economic mature. PV tracking techniques can play a vital role in improving the performance of the PV system. The aim of this paper is to evaluate and compare the technical and economic performance of grid-connected hybrid energy systems including PV and fuel cells (FC) by applying major types of PV tracking technique. The topology and design principles and technical description of hybrid system components are proposed in this paper. Moreover, this paper also introduces economic criteria, which are used to evaluate the economy of different PV tracking techniques and seek the optimal configuration of system components. In the case study, the results show that the vertical single axis tracker was ranked 1st in terms of highest PV generation, penetration of renewable energy to the grid, lowest CO2 emission, highest energy sold to the grid and lowest purchased, and lowest net present cost (NPC) and levelized cost of energy (LCOE). The study found that the optimal design of a grid-connected hybrid energy system (PV-FC) was by using a vertical single axis tracker which has the lowest NPC, LCOE.

scholarly journals Daily Operation Optimization of a Hybrid Energy System Considering a Short-Term Electricity Price Forecast Scheme

Energies ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 924 ◽  
Author(s):  
Pedro Bento ◽  
Hugo Nunes ◽  
José Pombo ◽  
Maria Calado ◽  
Sílvio Mariano
Keyword(s):  
Energy Systems ◽  
Energy System ◽  
Short Term ◽  
Operation Optimization ◽  
Hybrid Energy ◽  
Price Forecast ◽  
Hybrid Energy Systems ◽  
The Cost ◽  
Transportation Electrification ◽  
Installed Capacity

The scenario where the renewable generation penetration is steadily on the rise in an increasingly atomized system, with much of the installed capacity “sitting” on a distribution level, is in clear contrast with the “old paradigm” of a natural oligopoly formed by vertical structures. Thereby, the fading of the classical producer–consumer division to a broader prosumer “concept” is fostered. This crucial transition will tackle environmental harms associated with conventional energy sources, especially in this age where a greater concern regarding sustainability and environmental protection exists. The “smoothness” of this transition from a reliable conventional generation mix to a more volatile and “parti-colored" one will be particularly challenging, given escalating electricity demands arising from transportation electrification and proliferation of demand-response mechanisms. In this foreseeable framework, proper Hybrid Energy Systems sizing, and operation strategies will be crucial to dictate the electric power system’s contribution to the “green” agenda. This paper presents an optimal power dispatch strategy for grid-connected/off-grid hybrid energy systems with storage capabilities. The Short-Term Price Forecast information as an important decision-making tool for market players will guide the cost side dispatch strategy, alongside with the storage availability. Different scenarios were examined to highlight the effectiveness of the proposed approach.

scholarly journals Techno-Economic Evaluation of Interconnected Nuclear-Renewable Micro Hybrid Energy Systems with Combined Heat and Power

Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1642 ◽  
Author(s):  
Hossam A. Gabbar ◽  
Muhammad R. Abdussami ◽  
Md. Ibrahim Adham
Keyword(s):  
Fossil Fuel ◽  
Renewable Energy Sources ◽  
Ghg Emissions ◽  
Energy Systems ◽  
Energy System ◽  
Combined Heat And Power ◽  
Small Scale ◽  
Hybrid Energy ◽  
Hybrid Energy Systems ◽  
The Impact

Renewable energy sources (RESs) play an indispensable role in sustainable advancement by reducing greenhouse gas (GHG) emissions. Nevertheless, due to the shortcomings of RESs, an energy mix with RESs is required to support the baseload and to avoid the effects of RES variability. Fossil fuel-based thermal generators (FFTGs), like diesel generators, have been used with RESs to support the baseload. However, using FFTGs with RESs is not a good option to reduce GHG emissions. Hence, the small-scale nuclear power plant (NPPs), such as the micro-modular reactor (MMR), have become a modern alternative to FFTGs. In this paper, the authors have investigated five different hybrid energy systems (HES) with combined heat and power (CHP), named ‘conventional small-scale fossil fuel-based thermal energy system,’ ‘small-scale stand-alone RESs-based energy system,’ ‘conventional small-scale fossil fuel-based thermal and RESs-based HES,’ ‘small-scale stand-alone nuclear energy system,’ and ‘nuclear-renewable micro hybrid energy system (N-R MHES),’ respectively, in terms of net present cost (NPC), cost of energy (COE), and GHG emissions. A sensitivity analysis was also conducted to identify the impact of the different variables on the systems. The results reveal that the N-R MHES could be the most suitable scheme for decarbonization and sustainable energy solutions.

Economic Modeling of Hybrid Energy System

2013 ◽  
Author(s):  
Olumide Bello ◽  
Da’Janel Roberts-Smith ◽  
Landon Onyebueke
Keyword(s):  
Rural Communities ◽  
High Performance ◽  
Low Cost ◽  
Energy Systems ◽  
Energy System ◽  
Economic Modeling ◽  
Sustainable Mobility ◽  
Hybrid Energy System ◽  
Hybrid Energy ◽  
Hybrid Energy Systems

Hybrid Energy Systems (HES) offer hopeful solutions to an array of challenges circumventing conventional energy usage. From sustainable mobility developments to rural communities, hybrid energy systems can provide reliable energy to suffice any load demand when properly sized. Sizing optimality is essential in maintaining low-cost, high-performance and superior efficiency. The methodology for sizing a Photovoltaic-Wind-Diesel with battery backup hybrid energy system and its accompanying costs are calculated using Homer software. The results are presented in this article. Such costs include the concept of levelized cost of energy (LCOE), time-dependent trade-off considerations necessary to deploy a functional, reliable and cost-effective energy system and comfort. The anticipated output of this economic model validates the feasibility of attaining affordability and optimality in a HES that relies on renewable energy and battery storage for applications of varying scales.

scholarly journals Investigation of Optimal Hybrid Energy Systems Using Available Energy Sources in a Rural Area of Bangladesh

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5794
Author(s):  
Fazlur Rashid ◽  
Md. Emdadul Hoque ◽  
Muhammad Aziz ◽  
Talukdar Nazmus Sakib ◽  
Md. Tariqul Islam ◽  
...  
Keyword(s):  
Energy Source ◽  
Hybrid Systems ◽  
Rural Area ◽  
Peak Load ◽  
Energy Systems ◽  
Biomass Energy ◽  
Energy Sources ◽  
Diesel Generator ◽  
Hybrid Energy ◽  
Hybrid Energy Systems

The aims of this paper are to develop hybrid energy systems considering biomass energy sources as well as a framework and optimal configuration of hybrid systems of energy for a southern sub-urban area of Bhola district in Bangladesh, named Kukri Mukri island, and analyse the feasibility of the techno-economic prospects of these systems. In this work, electrification for the rural area is analysed for different configurations of the hybrid systems. The estimation of available resources with optimal sizing and analysis of techno-economic aspects is done through HOMER Pro software to satisfy the demand of peak load. Different configurations of hybrid energy systems, including PV/diesel, PV/wind, PV/diesel/wind, PV/wind/diesel/biomass, and wind/diesel, are analysed and compared through optimization of different energy sources in HOMER. The size of the system and components are optimized and designed depending on the net present cost (NPC) and the levelized cost of energy (LCOE). Due to the lower availability and rising cost of wind energy, the outcome of this work shows a solar-based photovoltaic (PV) as the main energy source, battery as the storage media, and diesel generator as an energy source for backup. The results indicate that LCOE is much lower for PV/wind/diesel/biomass (0.142 USD/kWh) than PV/diesel (0.199 USD/kWh), PV/wind (0.239 USD/kWh), PV/diesel/wind (0.167 USD/kWh), PV/diesel (0.343 USD/kWh), and wind/diesel (0.175 USD/kWh). Additionally, it is demonstrated from the research that the genetic algorithm (GA) process gives sustainable and cost-effective outcomes compared to HOMER.

scholarly journals USING PARTICLE SWARM OPTIMAZATION TO FIND OPTIMAL SIZING OF PV-BS AND DIESEL GENERATOR

2021 ◽  
Vol 25 (3) ◽  
pp. 51-59
Author(s):  
Abbas Q. Mohammed ◽  
◽  
Kassim A. Al-Anbarri ◽  
Rafid M. Hannun ◽  
◽  
...  
Keyword(s):  
Particle Swarm ◽  
Energy System ◽  
Total System ◽  
Diesel Generator ◽  
Optimal Sizing ◽  
Hybrid Energy ◽  
Multi Objective ◽  
Load Demand ◽  
Cost Of Energy ◽  
Southern Iraq

This paper explores the sizing optimization of stand -alone hybrid energy system (HES) in southern Iraq (Thi Qar province) for supply stand-alone households by the electricity. HES consist of three components (solar cell (PV), diesel generator (DG) and battery storage (BS)). Particle swarm optimization (PSO) used in this study for find optimal sizing of the HES to minimizing multi-objective, first objective is to minimizing the total system cost (TSC) that lead to minimizing cost of energy (COE). Second objective is to minimizing total emission CO2 (TECO2). The constraint of the optimization is the reliability (100 %) mean continuous provide the load demand by the electricity. The results of the optimization show the ability the algorithm to minimizing the multi-objective with continuous supply the load by the electricity through life cycle of the project (25) years.

Optimum Design of Standalone Hybrid Energy Systems Minimizing Waste of Renewable Energy

2016 ◽  
Author(s):  
A. T. D. Perera
Keyword(s):  
Renewable Energy ◽  
Fuel Consumption ◽  
Renewable Energy Sources ◽  
Energy Systems ◽  
Energy System ◽  
Energy Sources ◽  
Solar Pv ◽  
Energy Potential ◽  
Hybrid Energy ◽  
Hybrid Energy Systems

The importance of integrating renewable energy sources into standalone energy systems is highlighted in recent literature. Maintaining energy efficiency is challenging in designing such hybrid energy systems (HES) due to seasonal variation of renewable energy potential. This study evaluates the limitations in minimizing the losses in renewable energy generated mainly due to energy storage limitations and minimizing fuel consumption of the internal combustion generator (ICG). A standalone hybrid energy system with Solar PV (SPV), wind, battery bank and an ICG is modeled and optimized in this work. Levelized Energy Cost (LEC), Waste of Renewable Energy (WRE) and Fuel Consumption (FC) are taken as objective functions. Results highlight the importance of considering WRE as an objective function which increase the mix of energy sources that can help to increase the reliability of the system.

Exergy Analysis for Small Modular Reactor Hybrid Energy System

2015 ◽  
Author(s):  
Lauren Boldon ◽  
Piyush Sabharwall ◽  
Li (Emily) Liu
Keyword(s):  
Physical Environment ◽  
Exergy Analysis ◽  
Raw Materials ◽  
Storage System ◽  
Industrial Process ◽  
Energy Systems ◽  
Energy System ◽  
Actual System ◽  
Hybrid Energy ◽  
Hybrid Energy Systems

Nuclear hybrid energy systems (NHES) with the capability to store energy will advance the development of renewable energy technologies by providing reliable, non-carbon emitting, and integrated base-load nuclear energy. Small modular reactors (SMRs) will be significant in establishing hybrid energy systems because of their inherent financial advantages over larger commercial reactors; flexible deployment and faster onsite assembly; and ability to closely match required energy needs for industrial process heat applications. An SMR is a thermal energy plant comprised of many complex systems that interact with each other and their surroundings. To study such a system and set appropriate prices for outputs, it is important to assess thermoeconomics or the effective utility and costs of all resources. At its core, thermoeconomics is based upon the quality of energy, or exergy, flowing into and out of each component within a system. Limited research into the thermoeconomics behind SMRs has been performed, leaving an important gap in understanding. This article presents relevant exergetic cost theory and details methods behind an exergy analysis for an SMR-wind-storage system. To perform this analysis, both the physical and economic environments are identified to provide information on how overall system efficiencies and costs may be analyzed. The physical environment incorporates the actual system components, necessary raw materials, and the surroundings or reference environment. The economic environment refers to the upfront installation and operational costs in addition to market prices. In a purely thermodynamic exergy analysis, the exergetic cost may be determined from the physical environment alone and describes the necessary exergy for production to occur. To improve or optimize a system, system efficiency must be balanced with economics to make NHES more competitive and further their development.

Sign in / Sign up

Export Citation Format

Share Document