scholarly journals Mesh-Type Three-Dimensional (3D) Printing of Human Organs and Tumors: Fast, Cost-Effective, and Personalized Anatomic Modeling of Patient-Oriented Visual Aids

2021 ◽  
Vol 11 (3) ◽  
pp. 1047
Author(s):  
Jungirl Seok ◽  
Sungmin Yoon ◽  
Chang Hwan Ryu ◽  
Junsun Ryu ◽  
Seok-ki Kim ◽  
...  
Keyword(s):  
3D Printing ◽  
3D Modeling ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Tumor Location ◽  
Visual Aids ◽  
Surgical Specimen ◽  
Personalized Care ◽  
Fused Deposition ◽  
Mesh Work

Although three-dimensional (3D)-printed anatomic models are not new to medicine, the high costs and lengthy production times entailed have limited their application. Our goal was developing a new and less costly 3D modeling method to depict organ-tumor relations at faster printing speeds. We have devised a method of 3D modeling using tomographic images. Coordinates are extracted at a specified interval, connecting them to create mesh-work replicas. Adjacent constructs are depicted by density variations, showing anatomic targets (i.e., tumors) in contrasting colors. An array of organ solid-tumor models was printed via a Fused Deposition Modeling 3D printer at significantly less cost ($0.05/cm3) and time expenditure (1.73 min/cm3; both, p < 0.001). Printed models helped promote visual appreciation of organ-tumor anatomy and adjacent tissues. Our mesh-work 3D thyroidal prototype reproduced glandular size/contour and tumor location, readily approximating the surgical specimen. This newly devised mesh-type 3D printing method may facilitate anatomic modeling for personalized care and improve patient awareness during informed surgical consent.

scholarly journals Mesh-type 3D Printing of Human Organs and Tumors: Fast, Cost-Effective, and Personalized Anatomic Modeling

2020 ◽  
Author(s):  
Jungirl Seok ◽  
Sungmin Yoon ◽  
Chang Hwan Ryu ◽  
Junsun Ryu ◽  
Seok-ki Kim ◽  
...  
Keyword(s):  
3D Printing ◽  
3D Modeling ◽  
Fused Deposition Modeling ◽  
Cost Effective ◽  
Tumor Location ◽  
Surgical Specimen ◽  
Personalized Care ◽  
Fused Deposition ◽  
Mesh Work ◽  
Deposition Modeling

OBJECTIVE: Although 3D-printed anatomic models are not new to medicine, the high costs and lengthy production times entailed have limited their application. Our goal was developing a new and less costly 3D modeling method to depict organ-tumor relations at faster printing speeds. METHODS: We have devised a method of 3D modeling using DICOM images. Coordinates are extracted at a specified interval, connecting them to create mesh-work replicas. Adjacent constructs are depicted by density variations, showing anatomic targets (ie, tumors) in contrasting color. RESULTS: An array of organ solid-tumor models were printed via Fused Deposition Modeling 3D printer at significantly less cost ($0.05/cm3) and time expenditure (1.73 min/cm3; both, p&lt;.001). Printed models helped promote visual appreciation of organ-tumor anatomy and adjacent tissues. Our mesh-work 3D thyroidal prototype reproduced glangular size/contour and tumor location, readily approximating the surgical specimen. CONCLUSIONS: This newly devised mesh-type 3D printing method may facilitate anatomic modeling for personalized care and improve patient awareness during informed surgical consent.

scholarly journals Research on the Application of MWCNTs/PLA Composite Material in the Manufacturing of Conductive Composite Products in 3D Printing

Micromachines ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 635 ◽  
Author(s):  
Jinjie Luo ◽  
Haibao Wang ◽  
Duquan Zuo ◽  
Anping Ji ◽  
Yaowen Liu
Keyword(s):  
Composite Material ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Poly Lactic Acid ◽  
Melt Flow Rate ◽  
Conductive Composites ◽  
Fused Deposition ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

As an advanced manufacturing technology that has been developed in recent years, three-dimensional (3D) printing of macromolecular materials can create complex-shaped components that cannot be realized by traditional processing. However, only a few types of macromolecular materials are suitable for 3D printing: the structure must have a single function, and manufacturing macromolecular functional devices is difficult. In this study, using poly lactic acid (PLA) as a matrix, conductive composites were prepared by adding various contents of multi-walled carbon nanotubes (MWCNTs). The printability and properties of MWCNT/PLA composites with different MWCNT proportions were studied by using the fused deposition modeling (FDM) processing technology of 3D printing. The experimental results showed that high conductivity can be realized in 3D-printed products with a composite material containing 5% MWCNTs; its conductivity was 0.4 ± 0.2 S/cm, its tensile strength was 78.4 ± 12.4 MPa, and its elongation at break was 94.4% ± 14.3%. It had a good melt flow rate and thermal properties, and it enabled smooth printing, thus meeting all the requirements for the 3D printing of consumables.

A Heuristic Scaling Strategy for Multi-Robot Cooperative Three-Dimensional Printing

2020 ◽  
Vol 20 (4) ◽  
Author(s):  
Laxmi Poudel ◽  
Chandler Blair ◽  
Jace McPherson ◽  
Zhenghui Sha ◽  
Wenchao Zhou
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Evaluation Framework ◽  
Geometric Constraints ◽  
Mathematical Representation ◽  
Printing Process ◽  
Fused Deposition ◽  
3D Printers ◽  
Printing Time

Abstract While three-dimensional (3D) printing has been making significant strides over the past decades, it still trails behind mainstream manufacturing due to its lack of scalability in both print size and print speed. Cooperative 3D printing (C3DP) is an emerging technology that holds the promise to mitigate both of these issues by having a swarm of printhead-carrying mobile robots working together to finish a single print job cooperatively. In our previous work, we have developed a chunk-based printing strategy to enable the cooperative 3D printing with two fused deposition modeling (FDM) mobile 3D printers, which allows each of them to print one chunk at a time without interfering with the other and the printed part. In this paper, we present a novel method in discretizing the continuous 3D printing process, where the desired part is discretized into chunks, resulting in multi-stage 3D printing process. In addition, the key contribution of this study is the first working scaling strategy for cooperative 3D printing based on simple heuristics, called scalable parallel arrays of robots for 3DP (SPAR3), which enables many mobile 3D printers to work together to reduce the total printing time for large prints. In order to evaluate the performance of the printing strategy, a framework is developed based on directed dependency tree (DDT), which provides a mathematical and graphical description of dependency relationships and sequence of printing tasks. The graph-based framework can be used to estimate the total print time for a given print strategy. Along with the time evaluation metric, the developed framework provides us with a mathematical representation of geometric constraints that are temporospatially dynamic and need to be satisfied in order to achieve collision-free printing for any C3DP strategy. The DDT-based evaluation framework is then used to evaluate the proposed SPAR3 strategy. The results validate the SPAR3 as a collision-free strategy that can significantly shorten the printing time (about 11 times faster with 16 robots for the demonstrated examples) in comparison with the traditional 3D printing with single printhead.

scholarly journals Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials–Process Perspective

Pharmaceutics ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 124 ◽  
Author(s):  
Mohammad A. Azad ◽  
Deborah Olawuni ◽  
Georgia Kimbell ◽  
Abu Zayed Md Badruddoza ◽  
Md. Shahadat Hossain ◽  
...  
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Active Pharmaceutical Ingredient ◽  
Dosage Forms ◽  
Polymer Mixtures ◽  
Compression Process ◽  
Fused Deposition ◽  
Process Perspective ◽  
Printing Processes

Three dimensional (3D) printing as an advanced manufacturing technology is progressing to be established in the pharmaceutical industry to overcome the traditional manufacturing regime of 'one size fits for all'. Using 3D printing, it is possible to design and develop complex dosage forms that can be suitable for tuning drug release. Polymers are the key materials that are necessary for 3D printing. Among all 3D printing processes, extrusion-based (both fused deposition modeling (FDM) and pressure-assisted microsyringe (PAM)) 3D printing is well researched for pharmaceutical manufacturing. It is important to understand which polymers are suitable for extrusion-based 3D printing of pharmaceuticals and how their properties, as well as the behavior of polymer–active pharmaceutical ingredient (API) combinations, impact the printing process. Especially, understanding the rheology of the polymer and API–polymer mixtures is necessary for successful 3D printing of dosage forms or printed structures. This review has summarized a holistic materials–process perspective for polymers on extrusion-based 3D printing. The main focus herein will be both FDM and PAM 3D printing processes. It elaborates the discussion on the comparison of 3D printing with the traditional direct compression process, the necessity of rheology, and the characterization techniques required for the printed structure, drug, and excipients. The current technological challenges, regulatory aspects, and the direction toward which the technology is moving, especially for personalized pharmaceuticals and multi-drug printing, are also briefly discussed.

scholarly journals An overview on 3D Printed Medicine

2021 ◽  
Vol 18 (1) ◽  
pp. 07-13
Author(s):  
Neha Thakur ◽  
Hari Murthy
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Selective Laser Sintering ◽  
Three Dimensional ◽  
Herbal Medicines ◽  
Fused Deposition ◽  
Digitally Controlled ◽  
3D Printed ◽  
Semi Solid

Three-dimensional printing (3DP) is a digitally-controlled additive manufacturing technique used for fast prototyping. This paper reviews various 3D printing techniques like Selective Laser Sintering (SLS), Fused Deposition Modeling, (FDM), Semi-solid extrusion (SSE), Stereolithography (SLA), Thermal Inkjet (TIJ) Printing, and Binder jetting 3D Printing along with their application in the field of medicine. Normal medicines are based on the principle of “one-size-fits-all”. This is not true always, it is possible medicine used for curing one patient is giving some side effects to another. To overcome this drawback “3D Printed medicines” are developed. In this paper, 3D printed medicines forming different Active Pharmaceutical Ingredients (API) are reviewed. Printed medicines are capable of only curing the diseases, not for the diagnosis. Nanomedicines have “theranostic” ability which combines therapeutic and diagnostic. Nanoparticles are used as the drug delivery system (DDS) to damaged cells’ specific locations. By the use of nanomedicine, the fast recovery of the disease is possible. The plant-based nanoparticles are used with herbal medicines which give low-cost and less toxic medication called nanobiomedicine. 4D and 5D printing technology for the medical field are also enlightened in this paper.

Three-dimensional Printing of Supercapacitors based on Different Electrodes

2020 ◽  
Vol 64 (5) ◽  
pp. 50401-1-50401-10
Author(s):  
Anan Tanwilaisiri ◽  
Phichit Kajondecha
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Electrode Materials ◽  
Three Dimensional ◽  
Continuous Manufacturing ◽  
Simple Method ◽  
Current Collectors ◽  
Fused Deposition ◽  
Paste Extrusion ◽  
Conductive Paint

Abstract A fused deposition modeling (FDM) printing machine and a paste extrusion system were integrated, and supercapacitor samples were fabricated using a combination of two three-dimensional (3D) printing techniques. The FDM provided a simple method for creating a frame of electric double layer capacitor (EDLC) samples. The paste extrusion system offered the possibility of depositing different materials to complete the functions of the EDLC samples. A combination of these two 3D printing methods offered one continuous manufacturing process with a high accuracy of manufacturing. Different materials were used to build current collectors and electrodes. Silver and carbon conductive paints were used as current collector materials. Different electrode materials based on activated carbon (AC), carbon conductive paint, and their combination were prepared as three different slurries and deposited to form the electrodes of EDLC samples. The results showed that silver conductive paint was a suitable material for constructing current collectors, and carbon conductive paint mixed with AC was highly effective for use as an electrode material for supercapacitors.

3D printing of generative art using the assembly and deformation of direction-specified parts

2016 ◽  
Vol 22 (4) ◽  
pp. 636-644 ◽  
Author(s):  
Yaususi Kanada
Keyword(s):  
3D Printing ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
3D Models ◽  
Control Technique ◽  
Content Type ◽  
Fused Deposition ◽  
A New Technique ◽  
Printing Direction

Purpose A methodology for designing and printing three-dimensional (3D) objects with specified printing-direction using fused deposition modeling (FDM), which was proposed by a previous paper, enables the expression of natural directions, such as hair, fabric or other directed textures, in modeled objects. This paper aims to enhance this methodology for creating various shapes of generative visual objects with several specialized attributes. Design/methodology/approach The proposed enhancement consists of two new methods and a new technique. The first is a method for “deformation”. It enables deforming simple 3D models to create varieties of shapes much more easily in generative design processes. The second is the spiral/helical printing method. The print direction (filament direction) of each part of a printed object is made consistent by this method, and it also enables seamless printing results and enables low-angle overhang. The third, i.e. the light-reflection control technique, controls the properties of filament while printing with transparent polylactic acid. It enables the printed objects to reflect light brilliantly. Findings The proposed methods and technique were implemented in a Python library and evaluated by printing various shapes, and it is confirmed that they work well, and objects with attractive attributes, such as the brilliance, can be created. Research limitations/implications The methods and technique proposed in this paper are not well-suited to industrial prototyping or manufacturing that require strength or intensity. Practical implications The techniques proposed in this paper are suited for generatively producing various a small number of products with artistic or visual properties. Originality/value This paper proposes a completely different methodology for 3D printing than the conventional computer-aided design (CAD)-based methodology and enables products that cannot be created by conventional methods.

scholarly journals A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications

Scanning ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Yueyi Tian ◽  
ChunXu Chen ◽  
Xiaotong Xu ◽  
Jiayin Wang ◽  
Xingyu Hou ◽  
...  
Keyword(s):  
3D Printing ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Complex Geometry ◽  
Maxillofacial Surgery ◽  
Three Dimensional ◽  
Oral And Maxillofacial Surgery ◽  
Affecting Factors ◽  
Fused Deposition ◽  
Oral Implantology

Three-dimensional (3D) printing technologies are advanced manufacturing technologies based on computer-aided design digital models to create personalized 3D objects automatically. They have been widely used in the industry, design, engineering, and manufacturing fields for nearly 30 years. Three-dimensional printing has many advantages in process engineering, with applications in dentistry ranging from the field of prosthodontics, oral and maxillofacial surgery, and oral implantology to orthodontics, endodontics, and periodontology. This review provides a practical and scientific overview of 3D printing technologies. First, it introduces current 3D printing technologies, including powder bed fusion, photopolymerization molding, and fused deposition modeling. Additionally, it introduces various factors affecting 3D printing metrics, such as mechanical properties and accuracy. The final section presents a summary of the clinical applications of 3D printing in dentistry, including manufacturing working models and main applications in the fields of prosthodontics, oral and maxillofacial surgery, and oral implantology. The 3D printing technologies have the advantages of high material utilization and the ability to manufacture a single complex geometry; nevertheless, they have the disadvantages of high cost and time-consuming postprocessing. The development of new materials and technologies will be the future trend of 3D printing in dentistry, and there is no denying that 3D printing will have a bright future.

scholarly journals Dimensional Stability of 3D Printed Objects Made from Plastic Waste Using FDM: Potential Construction Applications

Buildings ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 516
Author(s):  
Essam Zaneldin ◽  
Waleed Ahmed ◽  
Aya Mansour ◽  
Amged El Hassan
Keyword(s):  
3D Printing ◽  
Construction Projects ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Cost Effective ◽  
Plastic Waste ◽  
Fused Deposition ◽  
Feasible Option ◽  
3D Printers ◽  
3D Printed

Construction projects are often challenged by tight budgets and limited time and resources. Contractors are, therefore, looking for ways to become competitive by improving efficiency and using cost-effective materials. Using three-dimensional (3D) printing for shaping materials to produce cost-effective construction elements is becoming a feasible option to make contractors more competitive locally and globally. The process capabilities for 3D printers and related devices have been tightened in recent years with the booming of 3D printing industries and applications. Contractors are attempting to improve production skills to satisfy firm specifications and standards, while attempting to have costs within competitive ranges. The aim of this research is to investigate and test the production process capability (Cp) of 3D printers using fused deposition modeling (FDM) to manufacture 3D printed parts made from plastic waste for use in the construction of buildings with different infill structures and internal designs to reduce cost. This was accomplished by calculating the actual requirement capabilities of the 3D printers under consideration. The production capabilities and requirements of FDM printers are first examined to develop instructions and assumptions to assist in deciphering the characteristics of the 3D printers that will be used. Possible applications in construction are then presented. As an essential outcome of this study, it was noticed that the 3D printed parts made from plastic waste using FDM printers are less expensive than using traditional lightweight non-load bearing concrete hollow masonry blocks, hourdi slab hollow bocks, and concrete face bricks.

Sign in / Sign up

Export Citation Format

Share Document