scholarly journals A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications

Scanning ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Yueyi Tian ◽  
ChunXu Chen ◽  
Xiaotong Xu ◽  
Jiayin Wang ◽  
Xingyu Hou ◽  
...  
Keyword(s):  
3D Printing ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Complex Geometry ◽  
Maxillofacial Surgery ◽  
Three Dimensional ◽  
Oral And Maxillofacial Surgery ◽  
Affecting Factors ◽  
Fused Deposition ◽  
Oral Implantology

Three-dimensional (3D) printing technologies are advanced manufacturing technologies based on computer-aided design digital models to create personalized 3D objects automatically. They have been widely used in the industry, design, engineering, and manufacturing fields for nearly 30 years. Three-dimensional printing has many advantages in process engineering, with applications in dentistry ranging from the field of prosthodontics, oral and maxillofacial surgery, and oral implantology to orthodontics, endodontics, and periodontology. This review provides a practical and scientific overview of 3D printing technologies. First, it introduces current 3D printing technologies, including powder bed fusion, photopolymerization molding, and fused deposition modeling. Additionally, it introduces various factors affecting 3D printing metrics, such as mechanical properties and accuracy. The final section presents a summary of the clinical applications of 3D printing in dentistry, including manufacturing working models and main applications in the fields of prosthodontics, oral and maxillofacial surgery, and oral implantology. The 3D printing technologies have the advantages of high material utilization and the ability to manufacture a single complex geometry; nevertheless, they have the disadvantages of high cost and time-consuming postprocessing. The development of new materials and technologies will be the future trend of 3D printing in dentistry, and there is no denying that 3D printing will have a bright future.

3D printing of generative art using the assembly and deformation of direction-specified parts

2016 ◽  
Vol 22 (4) ◽  
pp. 636-644 ◽  
Author(s):  
Yaususi Kanada
Keyword(s):  
3D Printing ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
3D Models ◽  
Control Technique ◽  
Content Type ◽  
Fused Deposition ◽  
A New Technique ◽  
Printing Direction

Purpose A methodology for designing and printing three-dimensional (3D) objects with specified printing-direction using fused deposition modeling (FDM), which was proposed by a previous paper, enables the expression of natural directions, such as hair, fabric or other directed textures, in modeled objects. This paper aims to enhance this methodology for creating various shapes of generative visual objects with several specialized attributes. Design/methodology/approach The proposed enhancement consists of two new methods and a new technique. The first is a method for “deformation”. It enables deforming simple 3D models to create varieties of shapes much more easily in generative design processes. The second is the spiral/helical printing method. The print direction (filament direction) of each part of a printed object is made consistent by this method, and it also enables seamless printing results and enables low-angle overhang. The third, i.e. the light-reflection control technique, controls the properties of filament while printing with transparent polylactic acid. It enables the printed objects to reflect light brilliantly. Findings The proposed methods and technique were implemented in a Python library and evaluated by printing various shapes, and it is confirmed that they work well, and objects with attractive attributes, such as the brilliance, can be created. Research limitations/implications The methods and technique proposed in this paper are not well-suited to industrial prototyping or manufacturing that require strength or intensity. Practical implications The techniques proposed in this paper are suited for generatively producing various a small number of products with artistic or visual properties. Originality/value This paper proposes a completely different methodology for 3D printing than the conventional computer-aided design (CAD)-based methodology and enables products that cannot be created by conventional methods.

Influence of Layer Parameters in Fused Deposition Modeling Three-Dimensional Printing on the Tensile Strength of a Product

2020 ◽  
Vol 861 ◽  
pp. 182-187
Author(s):  
Vinh Du Nguyen ◽  
Thai Xiem Trinh ◽  
Son Minh Pham ◽  
Trong Huynh Nguyen
Keyword(s):  
Tensile Strength ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Complex Geometry ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Layer Height ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Printing Parameters

Additive manufacturing (3D printing) is a hopeful technique that is used to produce complex geometry parts in a layer-by-layer method. Fused deposition modeling (FDM) is a popular 3D printing technology for producing components of thermoplastic polymers. In FDM process, the part quality is influenced strongly by the printing parameters. Until now, these parameters stil need to be investigated. Therefore, in this study, the influence of FDM 3D printing parameters on the tensile strength of product will be investigated. By experiment, three parameters, that is, layer height, solid layer top, and first-layer height, were studied. The investigation shows that the layer height is the only parameter impacted the tensile strength of the product.

scholarly journals Mesh-Type Three-Dimensional (3D) Printing of Human Organs and Tumors: Fast, Cost-Effective, and Personalized Anatomic Modeling of Patient-Oriented Visual Aids

2021 ◽  
Vol 11 (3) ◽  
pp. 1047
Author(s):  
Jungirl Seok ◽  
Sungmin Yoon ◽  
Chang Hwan Ryu ◽  
Junsun Ryu ◽  
Seok-ki Kim ◽  
...  
Keyword(s):  
3D Printing ◽  
3D Modeling ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Tumor Location ◽  
Visual Aids ◽  
Surgical Specimen ◽  
Personalized Care ◽  
Fused Deposition ◽  
Mesh Work

Although three-dimensional (3D)-printed anatomic models are not new to medicine, the high costs and lengthy production times entailed have limited their application. Our goal was developing a new and less costly 3D modeling method to depict organ-tumor relations at faster printing speeds. We have devised a method of 3D modeling using tomographic images. Coordinates are extracted at a specified interval, connecting them to create mesh-work replicas. Adjacent constructs are depicted by density variations, showing anatomic targets (i.e., tumors) in contrasting colors. An array of organ solid-tumor models was printed via a Fused Deposition Modeling 3D printer at significantly less cost ($0.05/cm3) and time expenditure (1.73 min/cm3; both, p < 0.001). Printed models helped promote visual appreciation of organ-tumor anatomy and adjacent tissues. Our mesh-work 3D thyroidal prototype reproduced glandular size/contour and tumor location, readily approximating the surgical specimen. This newly devised mesh-type 3D printing method may facilitate anatomic modeling for personalized care and improve patient awareness during informed surgical consent.

scholarly journals Desain dan Pembuatan Prototype Piston Honda MEGAPRO FI Menggunakan 3D Printing

2020 ◽  
Vol 1 (2) ◽  
pp. 81-91
Author(s):  
Frince Marbun ◽  
Richard A.M. Napitupulu
Keyword(s):  
3D Printing ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Layer By Layer ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Manufacturing Technologies ◽  
Aided Design

3D printing technology has great potential in today's manufacturing world, one of its uses is in making miniatures or prototypes of a product such as a piston. One of the most famous and inexpensive 3D printing (additive manufacturing) technologies is Fused Deposition Modeling (FDM), the principle FDM works by thermoplastic extrusion through a hot nozzle at melting temperature then the product is made layer by layer. The two most commonly used materials are ABS and PLA so it is very important to know the accuracy of product dimensions. FDM 3D Printing Technology is able to make duplicate products accurately using PLA material. FDM machines work by printing parts that have been designed by computer-aided design (CAD) and then exported in the form of STL or .stl files and uploaded to the slicer program to govern the printing press according to the design. Using Anet A8 brand 3D printing tools that are available to the public, Slicing of general CAD geometry files such as autocad and solidwork is the basis for making this object. This software is very important to facilitate the design process to be printed. Some examples of software that can be downloaded and used free of charge such as Repetier-Host and Cura. by changing the parameters in the slicer software is very influential in the 3D printing manufacturing process.

scholarly journals 3D-Printable PP/SEBS Thermoplastic Elastomeric Blends: Preparation and Properties

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 347 ◽  
Author(s):  
Shib Banerjee ◽  
Stephen Burbine ◽  
Nischay Kodihalli Shivaprakash ◽  
Joey Mead
Keyword(s):  
3D Printing ◽  
Carbon Black ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Mechanical Performance ◽  
Polymeric Materials ◽  
Fused Deposition ◽  
3D Printed ◽  
Injection Molded ◽  
Preferential Location

Currently, material extrusion 3D printing (ME3DP) based on fused deposition modeling (FDM) is considered a highly adaptable and efficient additive manufacturing technique to develop components with complex geometries using computer-aided design. While the 3D printing process for a number of thermoplastic materials using FDM technology has been well demonstrated, there still exists a significant challenge to develop new polymeric materials compatible with ME3DP. The present work reports the development of ME3DP compatible thermoplastic elastomeric (TPE) materials from polypropylene (PP) and styrene-(ethylene-butylene)-styrene (SEBS) block copolymers using a straightforward blending approach, which enables the creation of tailorable materials. Properties of the 3D printed TPEs were compared with traditional injection molded samples. The tensile strength and Young’s modulus of the 3D printed sample were lower than the injection molded samples. However, no significant differences could be found in the melt rheological properties at higher frequency ranges or in the dynamic mechanical behavior. The phase morphologies of the 3D printed and injection molded TPEs were correlated with their respective properties. Reinforcing carbon black was used to increase the mechanical performance of the 3D printed TPE, and the balancing of thermoplastic elastomeric and mechanical properties were achieved at a lower carbon black loading. The preferential location of carbon black in the blend phases was theoretically predicted from wetting parameters. This study was made in order to get an insight to the relationship between morphology and properties of the ME3DP compatible PP/SEBS blends.

scholarly journals Three-Dimensional Technology Applications in Maxillofacial Reconstructive Surgery: Current Surgical Implications

Nanomaterials ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2523
Author(s):  
Yasmin Ghantous ◽  
Aysar Nashef ◽  
Aladdin Mohanna ◽  
Imad Abu-El-naaj
Keyword(s):  
3D Printing ◽  
Head And Neck ◽  
Donor Site ◽  
Maxillofacial Surgery ◽  
Three Dimensional ◽  
Oral And Maxillofacial Surgery ◽  
3D Technology ◽  
Printing Technology ◽  
Reconstructive Procedures ◽  
3D Printing Technology

Defects in the oral and maxillofacial (OMF) complex may lead to functional and esthetic impairment, aspiration, speech difficulty, and reduced quality of life. Reconstruction of such defects is considered one of the most challenging procedures in head and neck surgery. Transfer of different auto-grafts is still considered as the “gold standard” of regenerative and reconstructive procedures for OMF defects. However, harvesting of these grafts can lead to many complications including donor-site morbidity, extending of surgical time, incomplete healing of the donor site and others. Three-dimensional (3D) printing technology is an innovative technique that allows the fabrication of personalized implants and scaffolds that fit the precise anatomy of an individual’s defect and, therefore, has attracted significant attention during the last few decades, especially among head and neck surgeons. Here we discuss the most relevant applications of the 3D printing technology in the oral and maxillofacial surgery field. We further show different clinical examples of patients who were treated at our institute using the 3D technology and discuss the indications, different technologies, complications, and their clinical outcomes. We demonstrate that 3D technology may provide a powerful tool used for reconstruction of various OMF defects, enabling optimal clinical results in the suitable cases.

scholarly journals Research on the Application of MWCNTs/PLA Composite Material in the Manufacturing of Conductive Composite Products in 3D Printing

Micromachines ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 635 ◽  
Author(s):  
Jinjie Luo ◽  
Haibao Wang ◽  
Duquan Zuo ◽  
Anping Ji ◽  
Yaowen Liu
Keyword(s):  
Composite Material ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Poly Lactic Acid ◽  
Melt Flow Rate ◽  
Conductive Composites ◽  
Fused Deposition ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

As an advanced manufacturing technology that has been developed in recent years, three-dimensional (3D) printing of macromolecular materials can create complex-shaped components that cannot be realized by traditional processing. However, only a few types of macromolecular materials are suitable for 3D printing: the structure must have a single function, and manufacturing macromolecular functional devices is difficult. In this study, using poly lactic acid (PLA) as a matrix, conductive composites were prepared by adding various contents of multi-walled carbon nanotubes (MWCNTs). The printability and properties of MWCNT/PLA composites with different MWCNT proportions were studied by using the fused deposition modeling (FDM) processing technology of 3D printing. The experimental results showed that high conductivity can be realized in 3D-printed products with a composite material containing 5% MWCNTs; its conductivity was 0.4 ± 0.2 S/cm, its tensile strength was 78.4 ± 12.4 MPa, and its elongation at break was 94.4% ± 14.3%. It had a good melt flow rate and thermal properties, and it enabled smooth printing, thus meeting all the requirements for the 3D printing of consumables.

A Heuristic Scaling Strategy for Multi-Robot Cooperative Three-Dimensional Printing

2020 ◽  
Vol 20 (4) ◽  
Author(s):  
Laxmi Poudel ◽  
Chandler Blair ◽  
Jace McPherson ◽  
Zhenghui Sha ◽  
Wenchao Zhou
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Evaluation Framework ◽  
Geometric Constraints ◽  
Mathematical Representation ◽  
Printing Process ◽  
Fused Deposition ◽  
3D Printers ◽  
Printing Time

Abstract While three-dimensional (3D) printing has been making significant strides over the past decades, it still trails behind mainstream manufacturing due to its lack of scalability in both print size and print speed. Cooperative 3D printing (C3DP) is an emerging technology that holds the promise to mitigate both of these issues by having a swarm of printhead-carrying mobile robots working together to finish a single print job cooperatively. In our previous work, we have developed a chunk-based printing strategy to enable the cooperative 3D printing with two fused deposition modeling (FDM) mobile 3D printers, which allows each of them to print one chunk at a time without interfering with the other and the printed part. In this paper, we present a novel method in discretizing the continuous 3D printing process, where the desired part is discretized into chunks, resulting in multi-stage 3D printing process. In addition, the key contribution of this study is the first working scaling strategy for cooperative 3D printing based on simple heuristics, called scalable parallel arrays of robots for 3DP (SPAR3), which enables many mobile 3D printers to work together to reduce the total printing time for large prints. In order to evaluate the performance of the printing strategy, a framework is developed based on directed dependency tree (DDT), which provides a mathematical and graphical description of dependency relationships and sequence of printing tasks. The graph-based framework can be used to estimate the total print time for a given print strategy. Along with the time evaluation metric, the developed framework provides us with a mathematical representation of geometric constraints that are temporospatially dynamic and need to be satisfied in order to achieve collision-free printing for any C3DP strategy. The DDT-based evaluation framework is then used to evaluate the proposed SPAR3 strategy. The results validate the SPAR3 as a collision-free strategy that can significantly shorten the printing time (about 11 times faster with 16 robots for the demonstrated examples) in comparison with the traditional 3D printing with single printhead.

scholarly journals Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials–Process Perspective

Pharmaceutics ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 124 ◽  
Author(s):  
Mohammad A. Azad ◽  
Deborah Olawuni ◽  
Georgia Kimbell ◽  
Abu Zayed Md Badruddoza ◽  
Md. Shahadat Hossain ◽  
...  
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Active Pharmaceutical Ingredient ◽  
Dosage Forms ◽  
Polymer Mixtures ◽  
Compression Process ◽  
Fused Deposition ◽  
Process Perspective ◽  
Printing Processes

Three dimensional (3D) printing as an advanced manufacturing technology is progressing to be established in the pharmaceutical industry to overcome the traditional manufacturing regime of 'one size fits for all'. Using 3D printing, it is possible to design and develop complex dosage forms that can be suitable for tuning drug release. Polymers are the key materials that are necessary for 3D printing. Among all 3D printing processes, extrusion-based (both fused deposition modeling (FDM) and pressure-assisted microsyringe (PAM)) 3D printing is well researched for pharmaceutical manufacturing. It is important to understand which polymers are suitable for extrusion-based 3D printing of pharmaceuticals and how their properties, as well as the behavior of polymer–active pharmaceutical ingredient (API) combinations, impact the printing process. Especially, understanding the rheology of the polymer and API–polymer mixtures is necessary for successful 3D printing of dosage forms or printed structures. This review has summarized a holistic materials–process perspective for polymers on extrusion-based 3D printing. The main focus herein will be both FDM and PAM 3D printing processes. It elaborates the discussion on the comparison of 3D printing with the traditional direct compression process, the necessity of rheology, and the characterization techniques required for the printed structure, drug, and excipients. The current technological challenges, regulatory aspects, and the direction toward which the technology is moving, especially for personalized pharmaceuticals and multi-drug printing, are also briefly discussed.

Sign in / Sign up

Export Citation Format

Share Document