scholarly journals Investigation of Mechanical Properties for Group Anchors

2021 ◽  
Vol 11 (4) ◽  
pp. 1521
Author(s):  
Juncai Cao ◽  
Nong Zhang ◽  
Shanyong Wang ◽  
Qun Wei
Keyword(s):  
Bearing Capacity ◽  
Coal Mine ◽  
Design Method ◽  
Stability Control ◽  
Surrounding Rock ◽  
Physical Test ◽  
Anchor Structure ◽  
The Stability ◽  
Mine Roadways ◽  
Prestressed Anchor

Prestressed anchor support is one of the most important support methods for coal mine roadways. As the coal mining depth increases, the adaptability of existing prestressed anchor has become weaker and weaker, which is mainly reflected in the current anchor prestress is much smaller than the support resistance required for the stability of the roadways and makes it difficult to effectively control the roadways. In order to solve the problem, a group anchor structure was proposed to realize higher prestressed anchor support technology and improve the support status of deep roadways. For coal mine roadways, group anchor structure is a new technology and new topic, and the design method and theoretical basis of the group anchor support are lacking. Therefore, the paper studied the bearing capacity of the group anchors through physical tests and numerical simulations. Among them, a special set of group anchor drawing tooling was designed and processed to match the physical test. The test results show that the group anchor structure can double the bearing capacity and bearing rigidity compared with traditional anchors, and the group anchor support can further optimize the support parameters to improve the bearing capacity of the surrounding rock. Therefore, the group anchor support is helpful to the stability control of the surrounding rock of the deep roadway.

scholarly journals Stability of "Support-Surrounding Rock" System for Fully Mechanized Longwall Mining in Steeply Dipping Coal Seams

2021 ◽  
Author(s):  
Luo Shenghu ◽  
tong wang ◽  
Wu Yongping ◽  
Huangfu Jingyu ◽  
Zhao Huatao
Keyword(s):  
Coal Seam ◽  
Longwall Mining ◽  
Stability Control ◽  
Surrounding Rock ◽  
Coal Seams ◽  
Physical Test ◽  
Rock System ◽  
Working Face ◽  
The Stability ◽  
Mining Height

Abstract The key to the safe and efficient longwall mining of steeply dipping seams lies in the stability control of the "support-surrounding rock" system. This paper analyzes the difficulty of controlling the stability of the support during the longwall mining process of steeply dipping coal seams in terms of the characteristics of the non-uniform filled-in gob using a combination of physical test, theoretical analysis and field measurements. Considering the floor as an elastic foundation, we built a "support-surrounding rock" mechanical model based on data obtained on "support-surrounding rock" systems in different regions and the laws of support motion under different load conditions. Our findings are summarized as follows. First, depending on the angle of the coal seam, the caving gangue will roll (slide) downward along the incline, resulting in the formation of a non-uniform filling zone in the deep gob in which the lower, middle, and upper sections are filled, half-filled, and empty, respectively. In addition, an inverted triangular hollow surface is formed on the floor of the gob in the middle and upper sections behind the support. Furthermore, as the angle of the coal seam, length of the working face, and mining height increase, the characteristics of the non-uniform filled-in gob are enhanced. Second, we found that, as a result of support by the gangue, the "support-surrounding rock" system is relatively stable in the lower part of the working face while, in the middle and upper sections of the working face, the contact method and loading characteristics of the support are more complicated, making stability control difficult. Third, the magnitude and direction of the load, action point, and mining height all affect the stability of the support to varying degrees, with the tangential load and action position of the roof load having the most significant impacts on the stability of the support. Under loading by the roof, rotation and subsidence of the support inevitably occur, with gradually increasing amplitude and effects on the inter-support and sliding forces. Finally, we found that it is advisable in the process of moving the support to adopt "sliding advance of support" measures and to apply a "down-up" removal order to ensure overall stability. These research results provide reference and guidance of significance to field practice production.

scholarly journals Mechanism and Procedure of Repeated Borehole Drilling Using Wall Protection and a Soft Structure to Prevent Rockburst: A Case Study

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Yongliang He ◽  
Mingshi Gao ◽  
Xu Dong ◽  
Xin Yu
Keyword(s):  
Energy Absorption ◽  
Control Method ◽  
Stability Control ◽  
Surrounding Rock ◽  
Support Structure ◽  
Geological Conditions ◽  
Borehole Drilling ◽  
The Stability ◽  
Mine Roadways

With the increasing mining depth of coal mines, the occurrence of rockburst, especially in mine roadways, is becoming critical as a severe dynamic disaster. This paper explores the stability control of deep mine roadways and solves the contradiction between the support and pressure relief of roadways by studying the use of an internal steel pipe for wall protection and a soft structure for energy absorption during repeated borehole drilling. Numerical simulations are performed to examine the effects of active support technology on the support structure during repeated drilling. Internal steel pipes can effectively prevent the support structure from being damaged. When the soft structure cracks, the energy transmitted from the rockburst to the roadway is significantly reduced. According to the deformation and failure characteristics of the surrounding rock of the 21170 roadway, the combination of anchor active support, hydraulic lifting shed support, and soft structure energy absorption is proposed. An engineering case study shows that the support method can effectively maintain the stability of the surrounding rock and ensure the safe mining of the working face. The proposed control method can provide reference for the prevention and control of rockburst in mine roadways under similar geological conditions.

scholarly journals Deformation Mechanism and Stability Control of Roadway Surrounding Rock with Compound Roof: Research and Applications

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1350 ◽  
Author(s):  
Yang Yu ◽  
Xiangyu Wang ◽  
Jianbiao Bai ◽  
Lianying Zhang ◽  
Hongchun Xia
Keyword(s):  
Bearing Capacity ◽  
Shear Failure ◽  
Early Stage ◽  
Tensile Force ◽  
Strong Support ◽  
Stability Control ◽  
Surrounding Rock ◽  
Guizhou Province ◽  
The Stability ◽  
Two Sides

In view of problems with roadways with a compound roof, such as the occurrence of instability in the roof strata, ease of separation of the layer caving, difficulty of maintenance, and poor safety, we established a mechanical calculation model of a roadway with compound roof using the elastic mechanics theory, taking the stability control of a roadway with compound roof at a coal mine in Guizhou Province, China as the research background, and based on the actual characteristics of the coal seam and the roof and floor slate. Expressions of the separation layer and instability limit load of compound roof were derived, and the calculation and verification were carried out in combination with the actual conditions. By means of numerical simulation, the distribution and evolution laws of stress, displacement and plastic zone of roadways with a compound roof were studied, and the deformation characteristics and instability mechanism of roadways with a compound roof were revealed: (1) in early stage deformation of roadway, the amount is large, the speed is fast, and the scale is wide; (2) compound roofs are vulnerable to abscission and instability, the bearing capacity of the two sides is low due to softness and cracking, the shear failure of side angles and vertex angles weakens the strength of surrounding rock, and the self-bearing capacity of surrounding rock is low; (3) the bolt and anchor bear relatively large tensile force, and the support structure is easy to be broken up. On this basis, the stability control principle of a roadway with compound roof tunnel was put forward: fast and timely support; high-strength bolt strong support; improving the stability of the roof and the bearing capacity of the two sides; restraining the shear failure of the key bearing parts such as the side angles and the bottom angles, and targeted stability control technology for roadways with a compound roof was developed. The field industrial test showed that the deformation of this roadway with a compound roof was effectively controlled and the overall stability of the roadway was effectively improved. The results of this study could provide useful reference for a roadway with a compound roof under similar conditions.

Study on High Prestressed Anchor Beam Supporting Optimization Technology in Deep Roadway

2013 ◽  
Vol 353-356 ◽  
pp. 1675-1679 ◽  
Author(s):  
Hui Li ◽  
Wen Jiang Liu ◽  
Wei Guo Qiao
Keyword(s):  
Coal Mine ◽  
Surrounding Rock ◽  
Ground Pressure ◽  
Safety Production ◽  
Original Scheme ◽  
Surrounding Rock Control ◽  
The Stability ◽  
Borehole Televiewer ◽  
Ground Penetrating ◽  
Prestressed Anchor

Coal mine has stepped into deep mining period in China, in which the ground pressure is great, the stability of the surrounding rock is poor and roadway is seriously destroyed. 3302 trick roadway of Zhaolou coal mine is the kilometers depth roadway, under the condition of original supporting, the roof settling amount and the surrounding rock deformation were large, which made bad effect on safety production. The surrounding rock failure region was monitored by borehole televiewer and ground penetrating radar, and the loosening failure law was analyzed. The scheme of high prestressed anchor beam was proposed according to the detection results, the crack distribution of surrounding rock and the stress of blots and anchors of original scheme and optimized scheme were analyzed by UDEC. The results of numerical simulation and field monitoring showed that increasing prestress of blot and anchors was better for the control of roof separation in anchorage zone and maintaining the integrity of roof, and high prestressed anchor beam can effectively improve the effect of surrounding rock control in roadways.

scholarly journals Study of the Stability Control of the Rock Surrounding Double-Key Strata Recovery Roadways in Shallow Seams

2019 ◽  
Vol 2019 ◽  
pp. 1-21 ◽  
Author(s):  
Cheng Zhu ◽  
Yong Yuan ◽  
Zhongshun Chen ◽  
Zhiheng Liu ◽  
Chaofeng Yuan
Keyword(s):  
Engineering Application ◽  
Stability Control ◽  
Surrounding Rock ◽  
Control Effect ◽  
Pressure Relief ◽  
Support Design ◽  
Key Strata ◽  
Fracture Development ◽  
Surrounding Rock Control ◽  
The Stability

The stability control of the rock surrounding recovery roadways guarantees the safety of the extraction of equipment. Roof falling and support crushing are prone to occur in double-key strata (DKS) faces in shallow seams during the extraction of equipment. Therefore, this paper focuses on the stability control of the rock surrounding DKS recovery roadways by combining field observations, theoretical analysis, and numerical simulations. First, pressure relief technology, which can effectively release the accumulated rock pressure in the roof, is introduced according to the periodic weighting characteristics of DKS roofs. A reasonable application scope and the applicable conditions for pressure relief technology are given. Considering the influence of the eroded area on the roof structure, two roof mechanics models of DKS are established. The calculation results show that the yield load of the support in the eroded area is low. A scheme for strengthening the support with individual hydraulic props is proposed, and then, the support design of the recovery roadway is improved based on the time effects of fracture development. The width of the recovery roadway and supporting parameters is redesigned according to engineering experience. Finally, constitutive models of the support and compacted rock mass in the gob are developed with FLAC3D software to simulate the failure characteristics of the surrounding rock during pressure relief and equipment extraction. The surrounding rock control effects of two support designs and three extraction schemes are comprehensively evaluated. The results show that the surrounding rock control effect of Scheme 1, which combines improved support design and the bidirectional extraction of equipment, is the best. Engineering application results show that Scheme 1 realizes the safe extraction of equipment. The research results can provide a reference and experience for use in the stability control of rock surrounding recovery roadways in shallow seams.

Strength Assessments of Concrete-Filled Steel Tubular Support of Soft Rock Roadway

2013 ◽  
Vol 838-841 ◽  
pp. 1884-1890 ◽  
Author(s):  
Guang Long Qu ◽  
Yan Fa Gao ◽  
Liu Yang ◽  
Bin Jing Xu ◽  
Guo Lei Liu ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
Coal Mine ◽  
Soft Rock ◽  
Surrounding Rock ◽  
Flexural Performance ◽  
Laboratory Test Results ◽  
Different Types ◽  
Soft Rock Roadway ◽  
Core Concrete ◽  
Rock Roadway

Compared with I-shaped and U-shaped supports in soft rock roadway, concrete-filled steel tubular (CFST) support, as a new supporting form, has stronger bearing capacity with reasonable price. So it is becoming more and more popular in roadway supporting of coal mine in China. In this article, the surrounding rock in soft rock roadway was classified into three different types: hard rock in deep coal mine, soft surrounding rock, extremely soft surrounding rock. And, according to the characteristics of deformation failure of the CFST support and the surrounding rock in the industrial tests, three different strength assessments, including assessment of axial compressive strength, assessment of lateral flexural performance, assessment of hardening rate of core concrete, were proposed through mechanical analysis and laboratory tests for the three different types of the surrounding rock, respectively. Moreover, aimed to insufficient flexural strength of the support or low hardening rate of the core concrete in some of the roadway supporting, strengthening lateral flexural performance or making early strength concrete was necessary for the above unfavorable situations. The laboratory test results showed that the ultimate bearing capacity for the CFST support with φ194*8mm of steel tube reinforced by φ38mm round steel was 31% greater than that of the unreinforced one, 177% greater than that of the U-shaped one with equivalent weight per unit length.

scholarly journals Study on the Instability Characteristics and Bolt Support in Deep Mining Roadways Based on the Surrounding Rock Stability Index: Example of Pansan Coal Mine

2020 ◽  
Vol 2020 ◽  
pp. 1-16 ◽  
Author(s):  
Jucai Chang ◽  
Kai He ◽  
Zhiqiang Yin ◽  
Wanfeng Li ◽  
Shihui Li ◽  
...  
Keyword(s):  
Coal Mine ◽  
Stability Index ◽  
Surrounding Rock ◽  
Full Length ◽  
Control Effect ◽  
Support Design ◽  
Rock Stability ◽  
Working Face ◽  
The Stability ◽  
Bolt Support

In view of the influence of mining stress on the stability of the surrounding rock of inclined roof mining roadways in deep mines, the surrounding rock stability index is defined and solved based on the rock strength criterion and the stress distribution. The mining roadway of the 17102(3) working face of the Pansan Coal Mine is used as the engineering background and example. The surrounding rock’ stabilities under the conditions of no support and bolt support are analyzed according to the surrounding rock’s stability index and the deformation data. The results show that the areas of low wall and high wall instability are 1.68 m2 and 2.12 m2, respectively, and the low wall is more stable than the high wall; the areas of the roof and floor instability are 0.33 m2 and 0.35 m2, respectively, and the roof and floor are more stable than the two sides. During mining, the area of instability greatly increases at first, then decreases to 0, and reaches a maximum value at the peak of the abutment pressure. The stability of the surrounding rock decreases first and then increases. Compared with the end anchoring bolt support, the full-length anchoring bolt support reduces the area of instability to a greater extent, and the full-length anchoring bolt support effect is better. The surrounding rock in the end anchoring zone and the full-length anchoring zone began to deform significantly at 200 m and 150 m from the working face, respectively. This indicates that the control effect of the full-length anchoring bolt support is better and verifies the rationality of the surrounding rock stability index to describe the instability characteristics. This research method can provide a theoretical reference for analysis of the stability characteristics and support design of different cross-section roadways.

Coal Seam Roadway Bolt Support Design Method Based on the Supporting Theory of Broken Rock Zone

2013 ◽  
Vol 734-737 ◽  
pp. 535-539
Author(s):  
Hai Yuan Liu ◽  
Zhi Gang Wang ◽  
Ji Li ◽  
Lang Bai
Keyword(s):  
Theoretical Foundation ◽  
Design Method ◽  
Field Application ◽  
Surrounding Rock ◽  
Support Design ◽  
Roadway Support ◽  
The Stability ◽  
Comprehensive Classification ◽  
Classification Index ◽  
Surrounding Rock Deformation

broken rock zone is the main reason for the convergence of surrounding rock deformation, and its thickness not only is a reflection of many factors which influence the stability of surrounding rock, but also is the results of the interaction of many factors, a comprehensive classification index. Roadway support design based on classification result of broken rock zone, has a solid theoretical foundation, and the field application effect is remarkable.

Stability and Deformation Analysis for Excavation and Backfilling of Fushun West Open-Pit Coal Mine

2013 ◽  
Vol 353-356 ◽  
pp. 751-755 ◽  
Author(s):  
Yong Cheng Yan ◽  
Xian Zhang Ling ◽  
Feng Zhang ◽  
Jia Hui Wang
Keyword(s):  
Coal Mine ◽  
Slip Surface ◽  
Surrounding Rock ◽  
Open Pit ◽  
Deformation Analysis ◽  
Interface Model ◽  
Safety Coefficient ◽  
Mine Slope ◽  
The Stability ◽  
Technical Basis

Taking section W400 of Fushun west open-pit coal mine for the research, the interface model of fracture zone and surrounding rock was established. FLAC3D is used to analysis the influence of excavation and backfill of open-fit coal mine to the slope stability and deformation. The numerical results and analysis show that: (1) when the open-pit coal mine slope is excavated to final production line, the safety coefficient is 2.98, with the excavation, the deformation of the Fushun No.1 Refinery Factory area increases. (2) With the increase of backfilling, the slope coefficient increases to 3.32, this will reduce the deformation of the Fushun No.1 Refinery Factory area. Furthermore, the positions of the dangerous slip surface and serious deformation part of factory area should be regards as key areas. These conclusions could provide technical basis for the stability analysis of Fushun west open-pit coal mine.

Sign in / Sign up

Export Citation Format

Share Document