scholarly journals Geometric Reduced-Attitude Control of Fixed-Wing UAVs

2021 ◽  
Vol 11 (7) ◽  
pp. 3147
Author(s):  
Erlend M. Coates ◽  
Thor I. Fossen
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Attitude Control ◽  
Controller Design ◽  
State Of The Art ◽  
Model Structure ◽  
Practical Application ◽  
Ultimate Boundedness ◽  
Adaptive Backstepping ◽  
Control Effectiveness ◽  
Heading Angle

This paper presents nonlinear, singularity-free autopilot designs for multivariable reduced-attitude control of fixed-wing aircraft. To control roll and pitch angles, we employ vector coordinates constrained to the unit two-sphere and that are independent of the yaw/heading angle. The angular velocity projected onto this vector is enforced to satisfy the coordinated-turn equation. We exploit model structure in the design and prove almost global asymptotic stability using Lyapunov-based tools. Slowly-varying aerodynamic disturbances are compensated for using adaptive backstepping. To emphasize the practical application of our result, we also establish the ultimate boundedness of the solutions under a simplified controller that only depends on rough estimates of the control-effectiveness matrix. The controller design can be used with state-of-the-art guidance systems for fixed-wing unmanned aerial vehicles (UAVs) and is implemented in the open-source autopilot ArduPilot for validation through realistic software-in-the-loop (SITL) simulations.

scholarly journals Motion Equations and Attitude Control in the Vertical Flight of a VTOL Bi-Rotor UAV

Electronics ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 208 ◽  
Author(s):  
Sergio Garcia-Nieto ◽  
Jesus Velasco-Carrau ◽  
Federico Paredes-Valles ◽  
Jose Salcedo ◽  
Raul Simarro
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Attitude Control ◽  
Controller Design ◽  
Experimental Studies ◽  
Hardware In The Loop ◽  
Motion Equations ◽  
Design And Implementation ◽  
Aerial Vehicles ◽  
Attitude Tracking ◽  
Tracking Controller

This paper gathers the design and implementation of the control system that allows an unmanned Flying-wing to perform a Vertical Take-Off and Landing (VTOL) maneuver using two tilting rotors (Bi-Rotor). Unmanned Aerial Vehicles (UAVs) operating in this configuration are also categorized as Hybrid UAVs due to their ability of having a dual flight envelope: hovering like a multi-rotor and cruising like a traditional fixed-wing, providing the opportunity of facing complex missions in which these two different dynamics are required. This work exhibits the Bi-Rotor nonlinear dynamics, the attitude tracking controller design and also, the results obtained through Hardware-In-the-Loop (HIL) simulation and experimental studies that ensure the controller’s efficiency in hovering operation.

scholarly journals Design of Satellite Attitude Control Algorithm Based on the SDRE Method Using Gas Jets and Reaction Wheels

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Luiz C. G. de Souza ◽  
Victor M. R. Arena
Keyword(s):  
Attitude Control ◽  
Control Algorithm ◽  
Controller Design ◽  
Algorithm Design ◽  
Large Angle ◽  
Space Mission ◽  
Control Technique ◽  
Gas Jets ◽  
State Dependent ◽  
Highly Nonlinear

An experimental attitude control algorithm design using prototypes can minimize space mission costs by reducing the number of errors transmitted to the next phase of the project. The Space Mechanics and Control Division (DMC) of INPE is constructing a 3D simulator to supply the conditions for implementing and testing satellite control hardware and software. Satellite large angle maneuver makes the plant highly nonlinear and if the parameters of the system are not well determined, the plant can also present some level of uncertainty. As a result, controller designed by a linear control technique can have its performance and robustness degraded. In this paper the standard LQR linear controller and the SDRE controller associated with an SDRE filter are applied to design a controller for a nonlinear plant. The plant is similar to the DMC 3D satellite simulator where the unstructured uncertainties of the system are represented by process and measurements noise. In the sequel the State-Dependent Riccati Equation (SDRE) method is used to design and test an attitude control algorithm based on gas jets and reaction wheel torques to perform large angle maneuver in three axes. The SDRE controller design takes into account the effects of the plant nonlinearities and system noise which represents uncertainty. The SDRE controller performance and robustness are tested during the transition phase from angular velocity reductions to normal mode of operation with stringent pointing accuracy using a switching control algorithm based on minimum system energy. This work serves to validate the numerical simulator model and to verify the functionality of the control algorithm designed by the SDRE method.

Vibration suppression of wind turbine nacelle with active electromagnetic mass damper systems using adaptive backstepping control

2021 ◽  
pp. 107754632199887
Author(s):  
Sinan Basaran ◽  
Fevzi Cakmak Bolat ◽  
Selim Sivrioglu
Keyword(s):  
Vibration Suppression ◽  
Controller Design ◽  
Wind Load ◽  
Backstepping Control ◽  
Structural Systems ◽  
Adaptive Backstepping ◽  
Electromagnetic Mass ◽  
Flow Induced Vibration ◽  
Adaptive Backstepping Control ◽  
Mass Damper

Many structural systems, such as wind turbines, are exposed to high levels of stress during operation. This is mainly because of the flow-induced vibrations caused by the wind load encountered in every tall structure. Preventing the flow-induced vibration has been an important research area. In this study, an active electromagnetic mass damper system was used to eliminate the vibrations. The position of the stabilizer mass in the active electromagnetic mass damper system was determined according to the displacement information read on the system without using any spring element, unlike any conventional system. The proposed system in this study has a structure that can be implemented as a vibration suppressor in many intelligent structural systems. Two opposing electromagnets were used to determine the instant displacement of the stabilizer mass. The control currents to be given to these electromagnets are determined by using an adaptive backstepping control design. The adaptive controller algorithm can predict the wind load used in the controller design without prior knowledge of the actual wind load. It was observed that the designed active electromagnetic mass damper structure is successful in suppressing system vibrations. As a result, the proposed active electromagnetic mass damper system has been shown to be suitable for structural systems in flow-induced vibration damping.

Altitude Controller Design for Quadcopter UAV

2015 ◽  
Vol 74 (1) ◽  
Author(s):  
Muhammad Zaki Mustapa
Keyword(s):  
Real Time ◽  
Attitude Control ◽  
Controller Design ◽  
Design Method ◽  
Time Windows ◽  
The Real ◽  
Data Acquisition Card ◽  
Aerial Vehicle ◽  
Hovering Control ◽  
Real Time Application

This paper discusses on attitude control of a quadcopter unmanned aerial vehicle (UAV) in real time application. Newton-Euler equation is used to derive the model of system and the model characteristic is analyzed. The paper describes the controller design method for the hovering control of UAV automatic vertical take-off system. In order to take-off the quadcopter and stable the altitude, PID controller has been designed. The scope of study is to develop an altitude controller of the vertical take-off as realistic as possible. The quadcopter flight system has nonlinear characteristics. A simulation is conducted to test and analyze the control performance of the quadcopter model. The simulation was conducted by using Mat-lab Simulink. On the other hand, for the real time application, the PCI-1711 data acquisition card is used as an interface for controller design which routes from Simulink to hardware. This study showed the controller designs are implemented and tuned to the real system using Real Time Windows Target approach by Mat-Lab Simulink.

Sign in / Sign up

Export Citation Format

Share Document