scholarly journals Modeling Soil Water Content and Reference Evapotranspiration from Climate Data Using Deep Learning Method

2021 ◽  
Vol 11 (11) ◽  
pp. 5029
Author(s):  
Khadijeh Alibabaei ◽  
Pedro D. Gaspar ◽  
Tânia M. Lima

In recent years, deep learning algorithms have been successfully applied in the development of decision support systems in various aspects of agriculture, such as yield estimation, crop diseases, weed detection, etc. Agriculture is the largest consumer of freshwater. Due to challenges such as lack of natural resources and climate change, an efficient decision support system for irrigation is crucial. Evapotranspiration and soil water content are the most critical factors in irrigation scheduling. In this paper, the ability of Long Short-Term Memory (LSTM) and Bidirectional LSTM (BLSTM) to model daily reference evapotranspiration and soil water content is investigated. The application of these techniques to predict these parameters was tested for three sites in Portugal. A single-layer BLSTM with 512 nodes was selected. Bayesian optimization was used to determine the hyperparameters, such as learning rate, decay, batch size, and dropout size.The model achieved the values of mean square error values within the range of 0.014 to 0.056 and R2 ranging from 0.96 to 0.98. A Convolutional Neural Network (CNN) model was added to the LSTM to investigate potential performance improvement. Performance dropped in all datasets due to the complexity of the model. The performance of the models was also compared with CNN, traditional machine learning algorithms Support Vector Regression, and Random Forest. LSTM achieved the best performance. Finally, the impact of the loss function on the performance of the proposed models was investigated. The model with the mean square error as loss function performed better than the model with other loss functions.


2021 ◽  
Author(s):  
fawen li ◽  
chunya song ◽  
hua li

Abstract To examine whether the use of default CO2 database affected the simulation results, this paper built the AquaCrop models of winter wheat based on the measured CO2 database and the default CO2 database, respectively. The models were calibrated with data (2017–2018) and validated with the data (2018–2019) in the North China Plain. The residual coefficient method (CRM), root mean square error (RMSE), normalized root mean square error (NRMSE) and determination coefficient (R2) were used to test the model performance. The results showed that the accuracy of simulation under the two CO2 database were both good. Compared with the default CO2 database, the simulation accuracy under the measured CO2 database had higher accuracy. In order to verify the model further, the simulated values of evapotranspiration, soil water content and measured values were compared and analyzed. The results showed that there were some errors between the measured evapotranspiration and the values of simulation in the filling and waxing period of winter wheat. In general, the simulation values of evapotranspiration were consistent with the measured value at different irrigation levels. The simulated values ​​of the soil water content at the three levels of irrigation were all higher than the measured values, but the simulated results basically reflected the dynamic changes of soil water content throughout the growth period. The model adjustment value of WP*(the normalized water productivity) were a difference under the two CO2 databases, which is one of the reasons for the difference in the simulation results. The results show that in the absence of measured CO2 data, the default CO2 database can be used, which has little influence on the model construction, and the accuracy of the model constructed meets the actual demand. The research results can provide a basis for the establishment of crop models in North China Plain.



2014 ◽  
Vol 28 (2) ◽  
pp. 133-142 ◽  
Author(s):  
Eugene Balashov ◽  
Natalya Buchkina ◽  
Elena Rizhiya ◽  
Csilla Farkas

Abstract The objectives of the research were to: fulfil the preliminary assessment of the sensitivity of the soil, water, atmosphere, and plant and denitrification and decomposition models to variations of climate variables based on the existing soil database; validate the soil, water, atmosphere, and plant and denitrification and decomposition modelled outcomes against measured records for soil temperature and water content. The statistical analyses were conducted by the sensitivity analysis, Nash-Sutcliffe efficiency coefficients and root mean square error using measured and modelled variables during three growing seasons. Results of sensitivity analysis demonstrated that: soil temperatures predicted by the soil, water, atmosphere, and plant model showed a more reliable sensitivity to the variations of input air temperatures; soil water content predicted by the denitrification and decomposition model had a better reliability in the sensitivity to daily precipitation changes. The root mean square errors and Nash-Sutcliffe efficiency coefficients demonstrated that: the soil, water, atmosphere, and plant model had a better efficiency in predicting seasonal dynamics of soil temperatures than the denitrification and decomposition model; and among two studied models, the denitrification and decomposition model showed a better capability in predicting the seasonal dynamics of soil water content.



2010 ◽  
Vol 7 (2) ◽  
pp. 2313-2360 ◽  
Author(s):  
F. Oehler ◽  
J. C. Rutherford ◽  
G. Coco

Abstract. We designed generalized simplified models using machine learning algorithms (ML) to assess denitrification at the catchment scale. In particular, we designed an artificial neural network (ANN) to simulate total nitrogen emissions from the denitrification process. Boosted regression trees (BRT, another ML) was also used to analyse the relationships and the relative influences of different input variables towards total denitrification. To calibrate the ANN and BRT models, we used a large database obtained by collating datasets from the literature. We developed a simple methodology to give confidence intervals for the calibration and validation process. Both ML algorithms clearly outperformed a commonly used simplified model of nitrogen emissions, NEMIS. NEMIS is based on denitrification potential, temperature, soil water content and nitrate concentration. The ML models used soil organic matter % in place of a denitrification potential and pH as a fifth input variable. The BRT analysis reaffirms the importance of temperature, soil water content and nitrate concentration. Generality of the ANN model may also be improved if pH is used to differentiate between soil types. Further improvements in model performance can be achieved by lessening dataset effects.



IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 199097-199110
Author(s):  
Jingxin Yu ◽  
Song Tang ◽  
Lili Zhangzhong ◽  
Wengang Zheng ◽  
Long Wang ◽  
...  


Author(s):  
M.C.H.Mouat Pieter Nes

Reduction in water content of a soil increased the concentration of ammonium and nitrate in solution, but had no effect on the concentration of phosphate. The corresponding reduction in the quantity of phosphate in solution caused an equivalent reduction in the response of ryegrass to applied phosphate. Keywords: soil solution, soil water content, phosphate, ryegrass, nutrition.



2010 ◽  
Vol 59 (1) ◽  
pp. 157-164 ◽  
Author(s):  
E. Tóth ◽  
Cs. Farkas

Soil biological properties and CO2emission were compared in undisturbed grass and regularly disked rows of a peach plantation. Higher nutrient content and biological activity were found in the undisturbed, grass-covered rows. Significantly higher CO2fluxes were measured in this treatment at almost all the measurement times, in all the soil water content ranges, except the one in which the volumetric soil water content was higher than 45%. The obtained results indicated that in addition to the favourable effect of soil tillage on soil aeration, regular soil disturbance reduces soil microbial activity and soil CO2emission.



Author(s):  
Justyna Szerement ◽  
Aleksandra Woszczyk ◽  
Agnieszka Szyplowska ◽  
Marcin Kafarski ◽  
Arkadiusz Lewandowski ◽  
...  


2014 ◽  
Vol 22 (3) ◽  
pp. 300-307
Author(s):  
Meijun ZHANG ◽  
Wude YANG ◽  
Meichen FENG ◽  
Yun DUAN ◽  
Mingming TANG ◽  
...  




HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 549f-550
Author(s):  
Mongi Zekri ◽  
Bruce Schaffer ◽  
Stephen K. O'Hair ◽  
Roberto Nunez-Elisea ◽  
Jonathan H. Crane

In southern Florida, most tropical fruit crops between Biscayne and Everglades National Parks are irrigated at rates and frequencies based on experience and observations of tree growth and fruit yield rather than on reliable quantitative information of actual water use. This approach suggests that irrigation rates may be excessive and could lead to leaching of agricultural chemicals into the groundwater in this environmentally sensitive area. Therefore, a study is being conducted to increase water use efficiency and optimize irrigation by accurately scheduling irrigation using a very effective management tool (EnviroScan, Sentek Environmental Innovations, Pty., Kent, Australia) that continuously monitors soil water content with highly accurate capacitance multi-sensor probes installed at several depths within the soil profile. The system measures crop water use by monitoring soil water depletion rates and allows the maintenance of soil water content within the optimum range (below field capacity and well above the onset of plant water stress). The study is being conducted in growers' orchards with three tropical fruit crops (avocado, carambola, and `Tahiti' lime) to facilitate rapid adoption and utilization of research results.



Sign in / Sign up

Export Citation Format

Share Document