scholarly journals QRS Detection Based on Medical Knowledge and Cascades of Moving Average Filters

2021 ◽  
Vol 11 (15) ◽  
pp. 6995
Author(s):  
Lorenzo Bachi ◽  
Lucia Billeci ◽  
Maurizio Varanini
Keyword(s):  
Moving Average ◽  
Medical Knowledge ◽  
Detection Algorithm ◽  
Processing Technique ◽  
Qrs Detection ◽  
Computationally Efficient ◽  
Signal Processing Technique ◽  
Decision Logic ◽  
Robust Signal Processing ◽  
Electrocardiogram Ecg

Heartbeat detection is the first step in automatic analysis of the electrocardiogram (ECG). For mobile and wearable devices, the detection process should be both accurate and computationally efficient. In this paper, we present a QRS detection algorithm based on moving average filters, which affords a simple yet robust signal processing technique. The decision logic considers the rhythmic and morphological features of the QRS complex. QRS enhancing is performed with channel-specific moving average cascades selected from a pool of derivative systems we designed. We measured the effectiveness of our algorithm on well-known benchmark databases, reporting F1 scores, sensitivity on abnormal beats and processing time. We also evaluated the performances of other available detectors for a direct comparison with the same criteria. The algorithm we propose achieved satisfying performances on par with or higher than the other QRS detectors. Despite the performances we report are not the highest that have been published so far, our approach to QRS detection enhances computational efficiency while maintaining high accuracy.

A REAL-TIME QT INTERVAL DETECTION ALGORITHM

2008 ◽  
Vol 08 (02) ◽  
pp. 251-263 ◽  
Author(s):  
Z. E. HADJ SLIMANE ◽  
F. BEREKSI REGUIG
Keyword(s):  
Real Time ◽  
Qt Interval ◽  
Detection Algorithm ◽  
Qrs Detection ◽  
Signal To Noise ◽  
Ecg Signals ◽  
Wave Detection ◽  
T Wave ◽  
Electrocardiogram Ecg ◽  
Ventricular Depolarization

The QT interval is the electrocardiographic representation of the duration of ventricular depolarization and repolarization. In this paper, we have developed a new real-time QT interval detection algorithm for automatically locating the onset of QRS and the end of the T wave. The algorithm consists of several steps: signal-to-noise enhancement, QRS detection, QRS onset, and T-wave end definition. The detection algorithm is tested on electrocardiogram (ECG) signals from the universal MIT-BIH Arrhythmia Database. The resulting QRS detection algorithm has a sensitivity of 99.79% and a specificity of 99.72%. The QRS onset and T-wave detection algorithm is tested using several data records from the MIT/BIH Arrhythmia Database. The results obtained are shown to be highly satisfactory.

scholarly journals A ±6 ms-Accuracy, 0.68 mm2, and 2.21 μW QRS Detection ASIC

VLSI Design ◽  
2012 ◽  
Vol 2012 ◽  
pp. 1-13 ◽  
Author(s):  
Sheng-Chieh Huang ◽  
Hui-Min Wang ◽  
Wei-Yu Chen
Keyword(s):  
Integrated Circuit ◽  
State Of The Art ◽  
Population Aging ◽  
Detection Algorithm ◽  
Measurement Tool ◽  
The Novel ◽  
Qrs Detection ◽  
Application Specific Integrated Circuit ◽  
Electrocardiogram Ecg ◽  
Application Specific

Healthcare issues arose from population aging. Meanwhile, electrocardiogram (ECG) is a powerful measurement tool. The first step of ECG is to detect QRS complexes. A state-of-the-art QRS detection algorithm was modified and implemented to an application-specific integrated circuit (ASIC). By the dedicated architecture design, the novel ASIC is proposed with 0.68 mm2 core area and 2.21 μW power consumption. It is the smallest QRS detection ASIC based on 0.18 μm technology. In addition, the sensitivity is 95.65% and the positive prediction of the ASIC is 99.36% based on the MIT/BIH arrhythmia database certification.

scholarly journals Examining the Applicability of Wavelet Packet Decomposition on Different Forecasting Models in Annual Rainfall Prediction

Water ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 1997
Author(s):  
Hua Wang ◽  
Wenchuan Wang ◽  
Yujin Du ◽  
Dongmei Xu
Keyword(s):  
Wavelet Packet ◽  
Moving Average ◽  
Back Propagation ◽  
Processing Technique ◽  
Annual Rainfall ◽  
Wavelet Packet Decomposition ◽  
Rainfall Forecasting ◽  
Promising Alternative ◽  
Forecasting Models ◽  
Precipitation Prediction

Accurate precipitation prediction can help plan for different water resources management demands and provide an extension of lead-time for the tactical and strategic planning of courses of action. This paper examines the applicability of several forecasting models based on wavelet packet decomposition (WPD) in annual rainfall forecasting, and a novel hybrid precipitation prediction framework (WPD-ELM) is proposed coupling extreme learning machine (ELM) and WPD. The works of this paper can be described as follows: (a) WPD is used to decompose the original precipitation data into several sub-layers; (b) ELM model, autoregressive integrated moving average model (ARIMA), and back-propagation neural network (BPNN) are employed to realize the forecasting computation for the decomposed series; (c) the results are integrated to attain the final prediction. Four evaluation indexes (RMSE, MAE, R, and NSEC) are adopted to assess the performance of the models. The results indicate that the WPD-ELM model outperforms other models used in this paper and WPD can significantly enhance the performance of forecasting models. In conclusion, WPD-ELM can be a promising alternative for annual precipitation forecasting and WPD is an effective data pre-processing technique in producing convincing forecasting models.

scholarly journals A Remote Sensor System Based on TDLAS Technique for Ammonia Leakage Monitoring

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2448
Author(s):  
Hongbin Lu ◽  
Chuantao Zheng ◽  
Lei Zhang ◽  
Zhiwei Liu ◽  
Fang Song ◽  
...  
Keyword(s):  
Signal Processing ◽  
Limit Of Detection ◽  
Processing Technique ◽  
Tunable Diode Laser ◽  
Sensor System ◽  
Signal Processing Technique ◽  
Suppression Effect ◽  
Output Wavelength ◽  
Deviation Analysis ◽  
Remote Sensor

The development of an efficient, portable, real-time, and high-precision ammonia (NH3) remote sensor system is of great significance for environmental protection and citizens’ health. We developed a NH3 remote sensor system based on tunable diode laser absorption spectroscopy (TDLAS) technique to measure the NH3 leakage. In order to eliminate the interference of water vapor on NH3 detection, the wavelength-locked wavelength modulation spectroscopy technique was adopted to stabilize the output wavelength of the laser at 6612.7 cm−1, which significantly increased the sampling frequency of the sensor system. To solve the problem in that the light intensity received by the detector keeps changing, the 2f/1f signal processing technique was adopted. The practical application results proved that the 2f/1f signal processing technique had a satisfactory suppression effect on the signal fluctuation caused by distance changing. Using Allan deviation analysis, we determined the stability and limit of detection (LoD). The system could reach a LoD of 16.6 ppm·m at an average time of 2.8 s, and a LoD of 0.5 ppm·m at an optimum averaging time of 778.4 s. Finally, the measurement result of simulated ammonia leakage verified that the ammonia remote sensor system could meet the need for ammonia leakage detection in the industrial production process.

scholarly journals Application of UAV in Search and Rescue Actions in Underground Mine—A Specific Sound Detection in Noisy Acoustic Signal

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3725
Author(s):  
Paweł Zimroz ◽  
Paweł Trybała ◽  
Adam Wróblewski ◽  
Mateusz Góralczyk ◽  
Jarosław Szrek ◽  
...  
Keyword(s):  
Signal Processing ◽  
Acoustic Signal ◽  
Processing Technique ◽  
Underground Mine ◽  
Search And Rescue ◽  
Reference Spectrum ◽  
Signal Processing Technique ◽  
Time Frequency ◽  
Communication Device ◽  
Frequency Representation

The possibility of the application of an unmanned aerial vehicle (UAV) in search and rescue activities in a deep underground mine has been investigated. In the presented case study, a UAV is searching for a lost or injured human who is able to call for help but is not able to move or use any communication device. A UAV capturing acoustic data while flying through underground corridors is used. The acoustic signal is very noisy since during the flight the UAV contributes high-energetic emission. The main goal of the paper is to present an automatic signal processing procedure for detection of a specific sound (supposed to contain voice activity) in presence of heavy, time-varying noise from UAV. The proposed acoustic signal processing technique is based on time-frequency representation and Euclidean distance measurement between reference spectrum (UAV noise only) and captured data. As both the UAV and “injured” person were equipped with synchronized microphones during the experiment, validation has been performed. Two experiments carried out in lab conditions, as well as one in an underground mine, provided very satisfactory results.

EXPRESS: The effect of low frequency equalisation on preference and sensorimotor synchronisation in music

2021 ◽  
pp. 174702182110371
Author(s):  
Scott Beveridge ◽  
Estefanía Cano ◽  
Steffen A. Herff
Keyword(s):  
Body Movement ◽  
Low Frequency ◽  
Empirical Support ◽  
Processing Technique ◽  
Original Version ◽  
Upper Body ◽  
Signal Processing Technique ◽  
Band Energy ◽  
Sensorimotor Synchronisation ◽  
Specific Frequency

Equalisation, a signal processing technique commonly used to shape the sound of music, is defined as the adjustment of the energy in specific frequency components of a signal. In this work we investigate the effects of equalisation on preference and sensorimotor synchronisation in music. Twenty-one participants engaged in a goal-directed upper body movement in synchrony with stimuli equalised in three low-frequency sub-bands (0 - 50 Hz, 50 - 100 Hz, 100 - 200 Hz). To quantify the effect of equalisation, music features including spectral flux, pulse clarity, and beat confidence were extracted from seven differently equalised versions of music tracks - one original and six manipulated versions for each music track. These music tracks were then used in a movement synchronisation task. Bayesian mixed effects models revealed different synchronisation behaviours in response to the three sub-bands considered. Boosting energy in the 100 - 200 Hz sub-band reduced synchronisation performance irrespective of the sub-band energy of the original version. An energy boost in the 0 - 50 Hz band resulted in increased synchronisation performance only when the sub-band energy of the original version was high. An energy boost in the 50 - 100 Hz band increased synchronisation performance only when the sub-band energy of the original version was low. Boosting the energy in any of the three subbands increased preference regardless of the energy of the original version. Our results provide empirical support for the importance of low-frequency information for sensorimotor synchronisation and suggest that the effect of equalisation on preference and synchronisation are largely independent of one another.

Sign in / Sign up

Export Citation Format

Share Document