scholarly journals Ventilation Characteristics and Performance Evaluation of Different Window-Opening Forms in a Typical Office Room

2021 ◽  
Vol 11 (19) ◽  
pp. 8966
Author(s):  
Yuanyuan Wang ◽  
Yanzhe Yu ◽  
Tianzhen Ye ◽  
Quan Bo
Keyword(s):  
Thermal Comfort ◽  
Natural Ventilation ◽  
Cfd Simulation ◽  
Thermal Sensation ◽  
Ventilation Rate ◽  
Window Opening ◽  
Ventilation Modes ◽  
Ventilation Performance ◽  
Scale Experiment ◽  
And Performance

As most existing office buildings in China lack fresh air systems for ventilation, natural ventilation with windows remains the main means of improving indoor air quality and adjusting indoor thermal comfort. However, knowledge of the ventilation characteristics of various window-opening forms in actual buildings is limited and current methods for evaluating ventilation performance lack a comprehensive consideration of ventilation rate and thermal comfort. In this study, the ventilation characteristics of different window-opening forms were systematically compared by conducting computational fluid dynamics (CFD) simulations. A full-scale experiment was conducted in a typical office room in a university in Tianjin to validate the CFD simulation. Two ventilation modes (wind-driven cross-ventilation and temperature-driven single-sided ventilation), three window-opening angles, and seven window types were investigated. Additionally, the ratio of the ventilation rate to the absolute value of thermal sensation was used to quantify the indoor natural-ventilation performance. The results showed that a sliding window with a full opening has the highest discharge coefficients of 0.68 and 0.52 under wind-driven cross-ventilation and temperature-driven single-sided ventilation, respectively, and top-hung windows opening both inwards and outwards have better ventilation performance than other window types under the two ventilation modes. This study is applicable to the design and practice of natural ventilation.

The Potential of Natural Ventilation in Single-Sided Ventilated Apartment to Improve Indoor Thermal Comfort and Air Quality

2011 ◽  
Author(s):  
M. F. Mohamed ◽  
M. Behnia ◽  
S. King ◽  
D. Prasad
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Natural Ventilation ◽  
Architectural Element ◽  
Flat Design ◽  
Effective Ventilation ◽  
Computational Fluid Dynamics Cfd ◽  
Ventilation Performance

Cross ventilation is a more effective ventilation strategy in comparison to single-sided ventilation. In the NSW Residential Flat Design Code1 (RFDC) the majority of apartments are required to adopt cross ventilation. However, in the case of studio and one-bedroom apartments, it is acknowledged that single-sided ventilation may prevail. Deep plan studio and one-bedroom apartments may achieve lower amenity of summer thermal comfort and indoor air quality where mechanical ventilation is not provided by air conditioning. Since compliance with the code may allow up to 40% of apartments in a development in Sydney to be single sided, it is important to understand the natural ventilation performance of such apartments. The objective of this paper is to investigate the natural ventilation potential in single-sided ventilated apartments to improve indoor air quality and thermal comfort. This investigation includes simulating various facade treatments involving multiple opening and balcony configurations. Balcony configurations are included in this study because, in Sydney, a balcony is a compulsory architectural element in any apartment building. The study uses computational fluid dynamics (CFD) software to simulate and predict the ventilation performance of each apartment configuration. This study suggests that properly configured balconies and openings can significantly improve indoor ventilation performance for enhanced indoor air quality and thermal comfort, by optimizing the available prevailing wind. However, it is important to note that inappropriately designed fac¸ade treatments also could diminish natural ventilation performance.

Effect of natural ventilation mode on thermal comfort and ventilation performance: Full-scale measurement

2017 ◽  
Vol 156 ◽  
pp. 1-16 ◽  
Author(s):  
Sara Omrani ◽  
Veronica Garcia-Hansen ◽  
Bianca R. Capra ◽  
Robin Drogemuller
Keyword(s):  
Thermal Comfort ◽  
Natural Ventilation ◽  
Full Scale ◽  
Ventilation Mode ◽  
Ventilation Performance

scholarly journals Group Layout Pattern and Outdoor Wind Environment of Enclosed Office Buildings in Hangzhou

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 406 ◽  
Author(s):  
Xiaoyu Ying ◽  
Yanling Wang ◽  
Wenzhe Li ◽  
Ziqiao Liu ◽  
Grace Ding
Keyword(s):  
Natural Ventilation ◽  
Cfd Simulation ◽  
Simulation Software ◽  
Office Building ◽  
Wind Environment ◽  
Site Model ◽  
Advantages And Disadvantages ◽  
Building Layout ◽  
Ventilation Performance ◽  
Group Layout

This paper presents a study of the effects of wind-induced airflow through the urban built layout pattern using statistical analysis. This study investigates the association between typically enclosed office building layout patterns and the wind environment. First of all, this study establishes an ideal site model of 200 m × 200 m and obtains four typical multi-story enclosed office building group layouts, namely the multi-yard parallel opening, the multi-yard returning shape opening, the overall courtyard parallel opening, and the overall courtyard returning shape opening. Then, the natural ventilation performance of different building morphologies is further evaluated via the computational fluid dynamics (CFD) simulation software Phoenics. This study compares wind speed distribution at an outdoor pedestrian height (1.5 m). Finally, the natural ventilation performance corresponding to the four layout forms is obtained, which showed that the outdoor wind environment of the multi-yard type is more comfortable than the overall courtyard type, and the degree of enclosure of the building group is related to the advantages and disadvantages of the outdoor wind environment. The quantitative relevance between building layout and wind environment is examined, according to which the results of an ameliorated layout proposal are presented and assessed by Phoenics. This research could provide a method to create a livable urban wind environment.

Comparative research on the air pollutant prevention and thermal comfort for different types of ventilation

2020 ◽  
pp. 1420326X2092552
Author(s):  
Yang Zhang ◽  
Wenxuan Yu ◽  
Youli Li ◽  
Han Li
Keyword(s):  
Thermal Comfort ◽  
Cfd Simulation ◽  
Thermal Sensation ◽  
Side Wall ◽  
Air Pollutant ◽  
Indoor Thermal Comfort ◽  
Subjective Experiment ◽  
Different Types ◽  
Computational Fluid Dynamics Cfd ◽  
Indoor Comfort

In this article, a comparative study on the outdoor air pollutant prevention and indoor thermal comfort for different types of ventilation was carried out. Both objective experiment, subjective experiment and computational fluid dynamics (CFD) simulation were conducted to investigate the differences in air pollutant prevention and thermal comfort between four common ventilation methods, namely supplying on the ceiling and returning on the ceiling (SC-RC), supplying on the ceiling and returning on the side wall (SC-RSW), supplying on the side wall and returning on the ceiling (SSW-RC), and supplying on the side wall and returning on the side wall (SSW-RSW). Results show that SSW-RSW can provide the highest indoor air quality according to the indoor average PM2.5 concentration. Overall thermal sensation was introduced to evaluate the indoor comfort under the four ventilation methods. The voting results show that the indoor thermal comfort can be enhanced by 29–36% under SSW-RSW and SSW-RC. Therefore, SSW-RSW is more suitable for providing a healthy and comfortable indoor environment.

scholarly journals Effects of Lateral Window Position and Wind Direction on Wind-Driven Natural Cross Ventilation of a Building: A Computational Approach

2014 ◽  
Vol 2014 ◽  
pp. 1-15 ◽  
Author(s):  
M. Z. I. Bangalee ◽  
J. J. Miau ◽  
S. Y. Lin ◽  
M. Ferdows
Keyword(s):  
Wind Direction ◽  
Natural Ventilation ◽  
Ventilation System ◽  
Ventilation Rate ◽  
Experimental Investigations ◽  
Original Design ◽  
Lateral Direction ◽  
Window Position ◽  
Ventilation Performance ◽  
Moderate Range

Energy is saved when an effective natural ventilation system can provide comfort air to the occupants in a building by replacing a mechanical ventilation system. It also minimizes the risk of the environmental pollution and the global warming. A one story, full scale building was considered to carry out a comparative study of three different cases of wind-driven natural (WDN) cross ventilation with the help of computational fluid dynamics (CFD). In each case, the location of window was changed in lateral direction to predict the probable position for optimum ventilation performance and the angle of wind was varied to check the sensitivity of the wind direction on the flow field. After validating the current methodology through two satisfactory comparisons with the experimental investigations, the governing equations subjected to the corresponding boundary conditions were solved using commercial software and then the results were analyzed. A better location for the windows in each case was proposed. The ventilation purpose was served quite well even if the wind angle was changed in a moderate range from the original design. Furthermore, the velocity components, ventilation rate, surface pressure, ventilation time, and so forth in each case were investigated and compared extensively with those in other cases.

scholarly journals Evaluation of Thermal Comfort in the Traditional Bourgeoisie Houses in Beirut

2020 ◽  
Vol 3 (1) ◽  
pp. p1
Author(s):  
Jad Hammoud ◽  
Elise Abi Rached
Keyword(s):  
Thermal Comfort ◽  
Natural Ventilation ◽  
Heat Waves ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Residential Buildings ◽  
Ventilation System ◽  
Electricity Consumption ◽  
Comfort Level ◽  
Climate Zones

The increasing of energy demands has considerably increased the requirements for new and traditional buildings in different climate zones. Unprecedented heat waves have increased climate temperature, in particular, in moderate climate zones such as Lebanon. In Beirut, only the residential sector consumes 50% of total electricity consumption. HVAC (Heating, Ventilation and Air conditioning) systems are used to reach acceptable thermal comfort levels in the new residential buildings. In case of the traditional bourgeoisie houses in Beirut, there are no discussions about the use of HVAC systems to achieve the required thermal comfort level. Thus, to reach an acceptable thermal comfort level, these houses which already contain natural ventilation system shall adapt the modern thermal comfort requirements and thermal comfort strategies and technologies where their architectural features and existing materials condition the available solutions. In order to identify the best options within the possible intervention lines (envelopes, passive strategies, equipment, renewable energy systems), it is necessary to perceive the real performance of this type of houses. In this context, the article presents the results of the study of thermal performance and comfort in a three case studies located in Beirut. Detailed field data records collected are analyzed, with a view to identify the indoor thermal environment with respect to outdoor thermal environment in different seasons. Monitoring also included measurement of hygrothermal parameters and surveys of occupant thermal sensation.

scholarly journals Winter Thermal Comfort and Perceived Air Quality: A Case Study of Primary Schools in Severe Cold Regions in China

Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5958
Author(s):  
Fusheng Ma ◽  
Changhong Zhan ◽  
Xiaoyang Xu ◽  
Guanghao Li
Keyword(s):  
Air Quality ◽  
Primary School ◽  
Thermal Comfort ◽  
Indoor Air ◽  
Primary Schools ◽  
Natural Ventilation ◽  
Thermal Sensation ◽  
School Buildings ◽  
Heating Season ◽  
Cold Regions

In Northeast China, most classrooms in primary and secondary schools still use natural ventilation during cold days in winter. This study investigated the thermal comfort and the perceived air quality of children in primary schools in severe cold regions in China. Field measurements were conducted in four typical primary classrooms in two naturally ventilated teaching buildings in the winter of 2016 in the provincial city of Shenyang. Six field surveys were distributed to 141 primary students aged 8 to 11, and 835 valid questionnaires were collected. The results showed that the indoor temperature and the daily mean CO2 concentrations of the primary school classrooms ranged from 17.06 to 24.29 °C and from 1701 to 3959 ppm, respectively. The thermal neutral temperature of the primary school students was 18.5 °C, and the 90% thermal comfort temperature ranged from 17.3 to 20.1 °C. Children were able to respond to changes in indoor air quality, but there was no significant correlation between the children’s perceptions of air quality and the carbon dioxide levels in the classroom. In general, children have a lower comfort temperature than adults. In addition, children are more sensitive to temperature changes during the heating season than adults. Due to differences in thermal sensation between children and adults, the current thermal comfort standard based on adult data is not applicable to primary school buildings and children. The air quality evaluation during heating season indicates that it is necessary to add indoor air environment monitoring instruments and purification equipment to the naturally ventilated classrooms. At present and in the future, more research based on children’s data is needed to solve the indoor air environment problems in primary school buildings.

scholarly journals A Grey Box Modeling Method for Fast Predicting Buoyancy-Driven Natural Ventilation Rates through Multi-Opening Atriums

2019 ◽  
Vol 11 (12) ◽  
pp. 3239 ◽  
Author(s):  
Peng Xue ◽  
Zhengtao Ai ◽  
Dongjin Cui ◽  
Wei Wang
Keyword(s):  
Natural Ventilation ◽  
Simulated Data ◽  
Ventilation Rate ◽  
Modeling Method ◽  
Predictive Equation ◽  
Evaluation Time ◽  
Ventilation Performance ◽  
Ventilation Rates ◽  
Semi Empirical ◽  
Key Parameter

The utilization of buoyancy-driven natural ventilation in atrium buildings during transitional seasons helps create a healthy and comfortable indoor environment by bringing fresh air indoors. Among other factors, the air flow rate is a key parameter determining the ventilation performance of an atrium. In this study, a grey box modeling method is proposed and a prediction model is built for calculating the buoyancy-driven ventilation rate using three openings. This model developed from Bruce’s neutral height-based formulation and conservation laws is supported with a theoretical structure and determined with 7 independent variables and 4 integrated parameters. The integrated parameters could be estimated from a set of simulated data and in the results, the error of the semi-empirical predictive equation derived from CFD (computational fluid dynamics) simulated data is controlled within 10%, which indicates that a reliable predictive equation could be established with a rather small dataset. This modeling method has been validated with CFD simulated data, and it can be applied extensively to similar buildings for designing an expected ventilation rate. The simplicity of this grey box modeling should save the evaluation time for new cases and help designers to estimate the ventilation performance and choose building optimal opening designs.

scholarly journals Optimization of Window Positions for Wind-Driven Natural Ventilation Performance

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2464
Author(s):  
Nari Yoon ◽  
Mary Ann Piette ◽  
Jung Min Han ◽  
Wentao Wu ◽  
Ali Malkawi
Keyword(s):  
Architectural Design ◽  
Natural Ventilation ◽  
Cfd Simulation ◽  
Design Decision ◽  
Building Facades ◽  
Window Position ◽  
Computational Fluid Dynamics Cfd ◽  
Ventilation Performance ◽  
Energy Simulations ◽  
The Impact

This paper optimizes opening positions on building facades to maximize the natural ventilation’s potential for ventilation and cooling purposes. The paper demonstrates how to apply computational fluid dynamics (CFD) simulation results to architectural design processes, and how the CFD-driven decisions impact ventilation and cooling: (1) background: A CFD helps predict the natural ventilation’s potential, the integration of CFD results into design decision-making has not been actively practiced; (2) methods: Pressure data on building facades were obtained from CFD simulations and mapped into the 3D modeling environment, which were then used to identify optimal positions of two openings of a zone. The effect of the selected opening positions was validated with building energy simulations; (3) results: The cross-comparison study of different window positions based on different geographical locations quantified the impact on natural ventilation effectiveness; and (4) conclusions: The optimized window position was shown to be effective, and some optimal solutions contradicted the typical cross-ventilation strategy.

A numerical investigation on the impacts of voids combinations on natural ventilation of high-rise residential building

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hamza Laloui ◽  
Noor Hanita Abdul Majid ◽  
Aliyah Nur Zafirah Sanusi
Keyword(s):  
Thermal Comfort ◽  
Indoor Air ◽  
Design Methodology ◽  
Natural Ventilation ◽  
Residential Building ◽  
Air Velocity ◽  
Content Type ◽  
High Rise ◽  
Living Unit ◽  
Ventilation Performance

Purpose This paper aims to investigate the impacts of introducing voids combinations on natural ventilation performance in high-rise residential building living unit. Design/methodology/approach This study was carried out through field measurement and computational fluid dynamics methods. The parameters of the study are void types and sizes, and a wind angle was used to formulate case studies. Findings The results indicate that the provision of a single-sided horizontal void larger by 50% increase the indoor air velocity performance up to 322.37% to 0.471 m/s in the living unit and achieves the required velocity for thermal comfort. Originality/value Passive design features are the most desirable techniques to enhance natural ventilation performance in the high-rise residential apartments for thermal comfort and indoor air quality purposes.

Sign in / Sign up

Export Citation Format

Share Document