scholarly journals Surface Properties of Silica–MWCNTs/PDMS Composite Coatings Deposited on Plasma Activated Glass Supports

2021 ◽  
Vol 11 (19) ◽  
pp. 9256
Author(s):  
Michał Chodkowski ◽  
Iryna Ya. Sulym ◽  
Konrad Terpiłowski ◽  
Dariusz Sternik
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Multiwalled Carbon Nanotubes ◽  
Composite Coatings ◽  
Thermal Analyses ◽  
Sol Gel ◽  
Visible Range ◽  
Multiwalled Carbon ◽  
Scanning Electron

In this paper, we focus on fabrication and physicochemical properties investigations of silica–multiwalled carbon nanotubes/poly(dimethylsiloxane) composite coatings deposited on the glass supports activated by cold plasma. Air or argon was used as the carrier gas in the plasma process. Multiwalled carbon nanotubes were modified with poly(dimethylsiloxane) in order to impart their hydrophobicity. The silica–multiwalled carbon nanotubes/poly(dimethylsiloxane) nanocomposite was synthesized using the sol–gel technique with acid-assisted tetraethyl orthosilicate hydrolysis. The stability and the zeta potential of the obtained suspension were evaluated. Then, the product was dried and used as a filler in another sol–gel process, which led to the coating application via the dip-coating method. The substrates were exposed to the hexamethyldisilazane vapors in order to improve their hydrophobicity. The obtained surfaces were characterized by the wettability measurements and surface free energy determination as well as optical profilometry, scanning electron microscopy, and transmittance measurements. In addition, the thermal analyses of the carbon nanotubes as well as coatings were made. It was found that rough and hydrophobic coatings were obtained with a high transmittance in the visible range. They are characterized by the water contact angle larger than 90 degrees and the transmission at the level of 95%. The X-ray diffraction studies as well as scanning electron microscopy images confirmed the chemical and structural compositions of the coatings. They are thermally stable at the temperature up to 250 °C. Moreover, the thermal analysis showed that the obtained composite material has greater thermal resistance than the pure nanotubes.

Morphology and thermal properties of nanocomposites based on chiral poly(ester-imide) matrix reinforced by vitamin B1 functionalized multiwalled carbon nanotubes

2016 ◽  
Vol 51 (16) ◽  
pp. 2291-2300 ◽  
Author(s):  
Shadpour Mallakpour ◽  
Samaneh Soltanian
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Multiwalled Carbon Nanotubes ◽  
Vitamin B1 ◽  
Multiwalled Carbon ◽  
Transmission Electron ◽  
Functionalized Multiwalled Carbon Nanotubes ◽  
Scanning Electron

Chemical functionalization of carboxylated multiwalled carbon nanotubes with vitamin B1 was carried out under ultrasonic irradiation. The functionalized nanotubes were embedded in a chiral and biodegradable poly(ester-imide) to prepare multiwalled carbon nanotubes reinforced polymer nanocomposites. Optically active poly(ester-imide) was synthesized by step-growth polymerization of aromatic diol and amino acid based diacid. The vitamin B1 functionalized multiwalled carbon nanotubes and the resulting nanocomposites were examined using Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction, transmission electron microscopy, and field-emission scanning electron microscopy. Thermogravimetric analysis results indicated that temperature at 10% weight loss was increased from 409℃ for pure PEI to 419℃, 427℃, and 430℃ for nanocomposites containing 5%, 10%, and 15% functionalized multiwalled carbon nanotubes, respectively. The Fourier-transform scanning electron microscopy and transmission electron microscopy images exhibited that the functionalized multiwalled carbon nanotubes were separated individually and enwrapped by polymer chains.

MWCNTs-polymer composites characterization through spectroscopies: FTIR and Raman

MRS Advances ◽  
2018 ◽  
Vol 3 (63) ◽  
pp. 3757-3762 ◽  
Author(s):  
Francisco G. Granados-Martínez ◽  
José J. Contreras-Navarrete ◽  
Jael M. Ambriz-Torres ◽  
Carmen J. Gutiérrez-García ◽  
Diana L. García-Ruiz ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Polymer Composites ◽  
Multiwalled Carbon Nanotubes ◽  
Polymethyl Methacrylate ◽  
Multiwalled Carbon ◽  
Polymeric Matrices ◽  
Functionalized Multiwalled Carbon Nanotubes ◽  
Scanning Electron

ABSTRACTComposites from carbon nanotubes and polymers have been synthesized and studied. The composites were obtained joining carbon nanotubes with polymethyl methacrylate, nylon-6 and polystyrene. The materials were observed through scanning electron microscopy to evaluate the carbon nanotubes dispersion in the polymeric matrices. FTIR and Raman spectroscopies were used to analyze the interactions among functionalized and non-functionalized multiwalled carbon nanotubes and polymers, demonstrating affinity and peculiar spectra behaviors for each composite with different carbon nanotubes loads.

Effect of Injection Conditions on the Electrical Conductivity of MWCNTs/PC Conductive Composites

2014 ◽  
Vol 983 ◽  
pp. 105-109 ◽  
Author(s):  
Li Jun Wang ◽  
Jian Hui Qiu ◽  
Eiichi Sakai ◽  
Xiao Wei Wei
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Scanning Electron Microscopy ◽  
Multiwalled Carbon Nanotubes ◽  
Interfacial Interaction ◽  
Multiwalled Carbon ◽  
Injection Speed ◽  
Conductive Composites ◽  
Scanning Electron

Multiwalled carbon nanotubes/Polycarbonate (MWCNTs/PC) nanocomposites were successfully prepared by melting mixing. With the injection speed and temperature changed, different MWCNTs contents MWCNTs/ PC composites were prepared. The electrical conductivity of nanocomposites was compared with different injection speeds and injection temperatures. It was found that the electrical conductivity of the MWCNTs/PC nanocomposites was decreased with MWNTs content increasing, and were both affected by the injection speed and temperature. Besides, at the vicinity of the surface of samples, the resistivity of MWCNTs/PC nanocomposites was the maximum; the closer to the samples inner, the resistivity was smaller and more stabilized. The microstructure and morphology of composites were analyzed by Scanning Electron Microscopy (SEM) techniques, and the MWCNTs’ dispersion in PC matrix and the interfacial interaction between MWCNTs and PC were analyzed.

scholarly journals Synthesis and Physicochemical Behaviour of Polyurethane-Multiwalled Carbon Nanotubes Nanocomposites Based on Renewable Castor Oil Polyols

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Alaa Ali ◽  
Kamal Yusoh ◽  
S. F. Hasany
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Surface Area ◽  
Multiwalled Carbon Nanotubes ◽  
Castor Oil ◽  
Multiwalled Carbon ◽  
Area Studies ◽  
Composite Surface ◽  
Scanning Electron

Polyurethanes (PUs) are high performance materials, with vast industrial and engineering applications. In this research, effects of Multiwalled Carbon Nanotubes (MWCNTs) on physicochemical properties of Castor Oil based Polyurethanes (COPUs) were studied. MWCNTs were added in different weight percentages (0% to 1% wt) in a castor oil based polyurethane (COPUs-MWCNTs) nanocomposites. The composition, structure, and morphology of polyurethanes were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM), and element detection by energy dispersive spectroscopy (EDX) analysis, respectively. Thermal stability was studied by thermogravimetric analysis (TGA). Barrier properties and surface area studies were investigated by nitrogen permeability machine and BET technique. Mechanical properties were calculated by tensile universal testing machine. Results showed well dispersed MWCNTs in polyurethane matrix at different weight percentages. The best results were obtained with 0.3 wt% of MWCNTs in the composite. Surface area studies revealed presence of very few pores which is in a good agreement with barrier permeability, reduced up to ~68% in 1 wt% and ~70% in 0.5 wt% of MWCNTs in polymer matrix, with respect to pure COPUs samples.

scholarly journals Thermal Conductivity of Polyimide/Carbon Nanofiller Blends

2007 ◽  
Vol 334-335 ◽  
pp. 749-752 ◽  
Author(s):  
Subrata Ghose ◽  
K.A. Watson ◽  
D.M. Delozier ◽  
D.C. Working ◽  
John W. Connell ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Tensile Testing ◽  
Expanded Graphite ◽  
Multiwalled Carbon ◽  
Carbon Nanofiller ◽  
Scanning Electron

In efforts to improve the thermal conductivity (TC) of Ultem™ 1000, it was compounded with three carbon based nano-fillers. Multiwalled carbon nanotubes (MWCNT), vapor grown carbon nanofibers (CNF) and expanded graphite (EG) were investigated. Ribbons were extruded to form samples in which the nano-fillers were aligned. Samples were fabricated by compression molding where the nano-fillers were randomly oriented. The thermal properties were evaluated by DSC and TGA, and the mechanical properties of the aligned samples were determined by tensile testing. The degree of dispersion and alignment of the nanoparticles were investigated with high-resolution scanning electron microscopy. The thermal conductivity was measured in two directions using the Nanoflash technique.

scholarly journals Significantly Improved Dielectric Performance of Poly(1-butene)-Based Composite Films via Filling Polydopamine Modified Ba(Zr0.2Ti0.8)O3-Coated Multiwalled Carbon Nanotubes Nanoparticles

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 285
Author(s):  
Lingfei Li ◽  
Qiu Sun ◽  
Xiangqun Chen ◽  
Zhaohua Jiang ◽  
Yongjun Xu
Keyword(s):  
Carbon Nanotubes ◽  
Dielectric Constant ◽  
Energy Storage ◽  
Composite Film ◽  
Multiwalled Carbon Nanotubes ◽  
Sol Gel ◽  
Composite Films ◽  
Weak Electric Field ◽  
Multiwalled Carbon ◽  
Dielectric Performance

The low dielectric constant of the nonpolar polymer poly(1-butene) (PB-1) limits its application as a diaphragm element in energy storage capacitors. In this work, Ba(Zr0.2Ti0.8)O3-coated multiwalled carbon nanotubes (BZT@MWCNTs) were first prepared by using the sol–gel hydrothermal method and then modified with polydopamine (PDA) via noncovalent polymerization. Finally, PB-1 matrix composite films filled with PDA-modified BZT@MWCNTs nanoparticles were fabricated through a solution-casting method. Results indicated that the PDA-modified BZT@MWCNTs had good dispersion and binding force in the PB-1 matrix. These characteristics improved the dielectric and energy storage performances of the films. Specifically, the PDA-modified 10 vol% BZT@ 0.5 vol% MWCNTs/PB-1 composite film exhibited the best dielectric performance. At 1 kHz, the dielectric constant of this film was 25.43, which was 12.7 times that of pure PB-1 films. Moreover, its dielectric loss was 0.0077. Furthermore, under the weak electric field of 210 MV·m−1, the highest energy density of the PDA-modified 10 vol% BZT@ 0.5 vol% MWCNTs/PB-1 composite film was 4.57 J·cm−3, which was over 3.5 times that of PB-1 film (≈1.3 J·cm−3 at 388 MV·m−1).

scholarly journals Structural and optical properties of SnO2–Al2O3 nanocomposite synthesized via sol-gel route

2015 ◽  
Vol 33 (4) ◽  
pp. 714-718 ◽  
Author(s):  
Neeraj K. Mishra ◽  
Chaitnaya Kumar ◽  
Amit Kumar ◽  
Manish Kumar ◽  
Pratibha Chaudhary ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Properties ◽  
Sol Gel ◽  
Physical Interaction ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Sensing Applications ◽  
Scanning Electron

AbstractA nanocomposite of 0.5SnO2–0.5Al2O3 has been synthesized using a sol-gel route. Structural and optical properties of the nanocomposite have been discussed in detail. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive X-ray diffraction spectroscopy confirm the phase purity and the particle size of the 0.5SnO2–0.5Al2O3 nanocomposite (13 to 15 nm). The scanning electron microscopy also confirms the porosity in the sample, useful in sensing applications. The FT-IR analysis confirms the presence of physical interaction between SnO2 and Al2O3 due to the slight shifting and broadening of characteristic bands. The UV-Vis analysis confirms the semiconducting nature because of direct transition of electrons into the 0.5SnO2–0.5Al2O3 nanocomposites.

Sign in / Sign up

Export Citation Format

Share Document