scholarly journals Bladeless Heart Pump Design: Modeling and Numerical Analysis

2021 ◽  
Vol 11 (21) ◽  
pp. 10177
Author(s):  
Vedrana Markučič ◽  
Mario Šavar ◽  
Severino Krizmanić ◽  
Bojan Biočina
Keyword(s):  
Shear Stress ◽  
Numerical Analysis ◽  
Stokes Equations ◽  
Negative Impact ◽  
Mechanical Energy ◽  
Outer Radius ◽  
Navier Stokes ◽  
Design Parameters ◽  
Pump Design ◽  
Heart Pump

In this paper, the design of a new type of heart pump is presented. The uniqueness of this pump concept is that the mechanical energy is transferred to the fluid by the rotation of flat disks without blades. Both theoretical and numerical analysis are used to determine the pump design parameters. The pump design parameters are calculated using the Navier–Stokes equations. The application of computational fluid dynamics is used to define the geometric design. The pump head and flow have to be within strictly defined limits to ensure normal blood circulation. The negative impact of the pump on the blood must be minimal (no stagnation and recirculation zones, shear stress in the acceptable range). It is also important to achieve the smallest possible pump volume. For the pump operating point of ∆p = 65 mmHg, Q = 5.43 L/min, and ω = 6000 rpm, the design parameters are inner radius R1 = 12 mm, outer radius R2 = 15 mm, the distance between disk of h = 1 mm, and the number of disks is n = 6. The shear stress in the rotor is in range 46–108 Pa and the pump residence time is 0.0194 s.

The numerical analysis of bifurcation problems with application to fluid mechanics

Acta Numerica ◽  
2000 ◽  
Vol 9 ◽  
pp. 39-131 ◽  
Author(s):  
K. A. Cliffe ◽  
A. Spence ◽  
S. J. Tavener
Keyword(s):  
Numerical Analysis ◽  
Fluid Mechanics ◽  
Stokes Equations ◽  
Mixed Finite Element ◽  
Finite Difference Methods ◽  
Singularity Theory ◽  
Mixed Finite Element Method ◽  
Convergence Theory ◽  
Navier Stokes ◽  
Bifurcation Problems

In this review we discuss bifurcation theory in a Banach space setting using the singularity theory developed by Golubitsky and Schaeffer to classify bifurcation points. The numerical analysis of bifurcation problems is discussed and the convergence theory for several important bifurcations is described for both projection and finite difference methods. These results are used to provide a convergence theory for the mixed finite element method applied to the steady incompressible Navier–Stokes equations. Numerical methods for the calculation of several common bifurcations are described and the performance of these methods is illustrated by application to several problems in fluid mechanics. A detailed description of the Taylor–Couette problem is given, and extensive numerical and experimental results are provided for comparison and discussion.

The turning couples on an elliptic particle settling in a vertical channel

1994 ◽  
Vol 271 ◽  
pp. 1-16 ◽  
Author(s):  
Peter Y. Huang ◽  
Jimmy Feng ◽  
Daniel D. Joseph
Keyword(s):  
Shear Stress ◽  
Vortex Shedding ◽  
Stokes Equations ◽  
Vertical Channel ◽  
Navier Stokes ◽  
Front Face ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Back Face ◽  
The One

We do a direct two-dimensional finite-elment simulation of the Navier–Stokes equations and compute the forces which turn an ellipse settling in a vertical channel of viscous fluid in a regime in which the ellipse oscillates under the action of vortex shedding. Turning this way and that is induced by large and unequal values of negative pressure at the rear separation points which are here identified with the two points on the back face where the shear stress vanishes. The main restoring mechanism which turns the broadside of the ellipse perpendicular to the fall is the high pressure at the ‘stagnation point’ on the front face, as in potential flow, which is here identified with the one point on the front face where the shear stress vanishes.

scholarly journals Off-Design Performance Prediction for Radial-Flow Impellers

1988 ◽  
Author(s):  
Shen C. Lee ◽  
Daying Chen
Keyword(s):  
Stokes Equations ◽  
Mechanical Energy ◽  
Navier Stokes ◽  
Shear Stresses ◽  
Pump Impeller ◽  
Navier Stokes Equations ◽  
Measured Velocity ◽  
Production Water ◽  
Performance Predictions ◽  
Stream Functions

A numerical method was developed to consider the two-dimensional flowfield between impeller blades of a given geometry. Solution of the laminar Navier-Stokes equations in geometry-oriented coordinates was obtained for stream functions and vorticities. Velocities and pressures were calculated to determine the output fluid-energy head. The circumferential components of the normal and shear stresses along the blade were evaluated to give the input mechanical-energy head. Performance predictions were obtained for different load conditions. Comparisons were made with the measured velocity vectors of the flowfield of an air-pump impeller and with the measured performance of a production water pump, good agreements were reached.

scholarly journals Effects of surfactant on propagation and rupture of a liquid plug in a tube

2019 ◽  
Vol 872 ◽  
pp. 407-437 ◽  
Author(s):  
M. Muradoglu ◽  
F. Romanò ◽  
H. Fujioka ◽  
J. B. Grotberg
Keyword(s):  
Shear Stress ◽  
Evolution Equations ◽  
Stokes Equations ◽  
Thin Liquid Film ◽  
Front Tracking ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Liquid Plug ◽  
Front Tracking Method ◽  
Airway Walls

Surfactant-laden liquid plug propagation and rupture occurring in lower lung airways are studied computationally using a front-tracking method. The plug is driven by an applied constant pressure in a rigid axisymmetric tube whose inner surface is coated by a thin liquid film. The evolution equations of the interfacial and bulk surfactant concentrations coupled with the incompressible Navier–Stokes equations are solved in the front-tracking framework. The numerical method is first validated for a surfactant-free case and the results are found to be in good agreement with the earlier simulations of Fujioka et al. (Phys. Fluids, vol. 20, 2008, 062104) and Hassan et al. (Intl J. Numer. Meth. Fluids, vol. 67, 2011, pp. 1373–1392). Then extensive simulations are performed to investigate the effects of surfactant on the mechanical stresses that could be injurious to epithelial cells, such as pressure and shear stress. It is found that the liquid plug ruptures violently to induce large pressure and shear stress on airway walls and even a tiny amount of surfactant significantly reduces the pressure and shear stress and thus improves cell survivability. However, addition of surfactant also delays the plug rupture and thus airway reopening.

Numerical Investigation of the Effect of Balancing-Hole on the Axial Force of a Partial Emission Pump

2014 ◽  
Author(s):  
Zhang Lisheng ◽  
Jiang Jin ◽  
Xiao Zhihuai ◽  
Li Yanhui
Keyword(s):  
Axial Force ◽  
Stokes Equations ◽  
Dominant Role ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Design Parameters ◽  
Navier Stokes Equations ◽  
Computational Fluid Dynamics Cfd ◽  
The Cost

In this paper numerical simulations were conducted to analyze the effects of design parameters and distribution of balancing-hole on the axial-force of a partial emission pump. The studied pump is a single stage pump with a Barske style impeller. Based on the original impeller, we designed 7 pumps with different balancing-hole diameters and the partial emission pump equipped with different impellers were simulated employing the commercial computational fluid dynamics (CFD) software Fluent 12.1 to solve the Navier-Stokes equations for three-dimensional steady flow. A sensitivity analysis of the numerical model was performed with the purpose of balancing the contradiction of numerical accuracy and the cost of calculation. The results showed that, with increasing of the capacity, the axial force varies little. The diameter of the inner balancing-hole plays a dominant role of reducing axial-force of partial emission pump, the axial-force decreases with increasing of inner balancing-hole diameter on the whole range of operation, the axial-force of impeller without inner balancing-hole is approximately 3 times larger than that of impeller with inner balancing-hole. While the diameter of outer balancing-hole has a reverse effects compared with that of inner balancing-hole. With increasing of outer balancing-hole, the axial force increases accordingly.

Aerodynamic and Aeroacoustic Analyses of a Regenerative Blower

2015 ◽  
Author(s):  
Man-Woong Heo ◽  
Tae-Wan Seo ◽  
Chung-Suk Lee ◽  
Kwang-Yong Kim
Keyword(s):  
Shear Stress ◽  
Variational Formulation ◽  
Stokes Equations ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Side Channel ◽  
Leakage Flow ◽  
Navier Stokes Equations ◽  
Unsteady Flow Analysis

This paper presents a parametric study to investigate the aerodynamic and aeroacoustic characteristics of a side channel regenerative blower. Flow analysis in the side channel blower was carried out by solving three-dimensional steady and unsteady Reynolds-averaged Navier-Stokes equations with the shear stress transport turbulence closure. Aeroacoustic analysis was conducted by solving the variational formulation of Lighthill’s analogy on the basis of the aerodynamic sources extracted from the unsteady flow analysis. The height and width of the blade and the angle between inlet and outlet ports were selected as three geometric parameters, and their effects on the aerodynamic and aeroacoustic performances of the blower have been investigated. The results showed that the aerodynamic and aeroacoustic performances were enhanced by decreasing height and width of blade. It was found that angle between inlet and outlet ports significantly influences the aerodynamic and aeroacoustic performances of the blower due to the stripper leakage flow.

Variation of Hydraulic Performance by Impeller Trimming of a Mixed-Flow Pump

2015 ◽  
Author(s):  
Hyeonmo Yang ◽  
Sung Kim ◽  
Kyoung-Yong Lee ◽  
Young-Seok Choi ◽  
Jin-Hyuk Kim
Keyword(s):  
Numerical Analysis ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Total Efficiency ◽  
Mixed Flow ◽  
Navier Stokes Equations ◽  
Ansys Cfx ◽  
Total Head ◽  
Flow Pump

One of the best examples of wasted energy is the selection of oversized pumps versus the rated conditions. Oversized pumps are forced to operate at reduced flows, far from their highest efficiency point. An unnecessarily large impeller will produce more flow than required, wasting energy. In the industrial field, trimming the impeller diameter is used more than changing the rotation speed to reduce the head of a pump. In this paper, the impeller trimming method of a mixed-flow pump is defined, and the variation in pump performance by reduction of the impeller diameter was predicted based on computational fluid dynamics. The impeller was trimmed to the same meridional ratio of the hub and shroud, and was compared in five cases. Numerical analysis was performed, including the inlet and outlet pipes in configurations of the mixed-flow pump to be tested. The commercial CFD code, ANSYS CFX-14.5, was used for the numerical analysis, and a three-dimensional Reynolds-averaged Navier-Stokes equations with a shear stress transport turbulence model were used to analyze incompressible turbulence flow. The performance parameters for evaluating the trimmed pump impellers were defined as the total efficiency and total head at the designed flow rate. The numerical and experimental results for the trimmed pump impellers were compared and discussed in this work.

Analysis of Three-Lobe Bearings Having Non-Newtonian Lubricants by a Finite Element Method

1983 ◽  
Vol 7 (1) ◽  
pp. 7-11 ◽  
Author(s):  
D.V. Singh ◽  
R. Sinhasan ◽  
S.P. Tayal
Keyword(s):  
Shear Stress ◽  
Stokes Equations ◽  
Load Capacity ◽  
Navier Stokes ◽  
Shear Strain Rate ◽  
Navier Stokes Equations ◽  
Viscosity Term ◽  
Static Performance ◽  
Iteration Technique ◽  
Element Method

Additives are extensively used in the commercial lubricants to improve their specific qualities. These lubricants are therefore non-Newtonian and their nonlinear relations between shear stress and shear strain rate are generally represented by cubic shear stress laws. The Navier-Stokes equations and the continuity equation in clindrical coordinates, representing the flow-field in the clearance space of each lobe of the three-lobe hydrodynamic journal bearings having Newtonian fluids, are solved by the finie element method using Galerkin’s technique. The solution for non-Newtonian lubricants is obtained by an iteration technique modifying the viscosity term in each iteration. The static performance characteristics have been obtained for both Newtonian and the non-Newtonian lubricants. The load capacity and friction of the bearing decrease with increase in the nonlinearity of the lubricant whereas the end flow is relatively unaffected.

Sign in / Sign up

Export Citation Format

Share Document