scholarly journals Effects of Basicity and Mesh on Cr Leaching of EAF Carbon Steel Slag

2018 ◽  
Vol 9 (1) ◽  
pp. 121 ◽  
Author(s):  
Davide Mombelli ◽  
Silvia Barella ◽  
Andrea Gruttadauria ◽  
Carlo Mapelli ◽  
Gwenn Le Saout ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Inductively Coupled Plasma ◽  
Steel Slag ◽  
Impurity Content ◽  
Toxic Metal ◽  
Slag Basicity ◽  
X Ray ◽  
Inductively Coupled ◽  
Cooling Speed ◽  
Plasma Mass Spectrometry

The slag’s chromium leaching is one of the most pressing concerns in Electric Arc Furnace (EAF) carbon and stainless steels production. In recent years, many studies have aimed at understanding which properties (basicity, cooling speed) and phases (spinels, wustite, silicates) determine the Cr leaching, defining different indices (sp-factor, cs-factor) in order to forecast the slag’s behavior compared to the leaching of this toxic metal. The literature suggests that spinel formation is usually a good way to fix Cr and prevent its leaching. However, in some conditions (high basicity, low amount of spinel-forming species) soluble Cr-bearing phases can be formed, i.e., Ca-chromite or unstable spinel. In these conditions, Cr can be leached easily, even if it is bound in a spinel structure. In this paper, the effects of basicity and impurities (Ca, Si) on the instability of Cr-spinel was investigated, with respect to slag mesh. The influence of basicity was also studied on Mg-wustite stability, which might contribute to the leaching of Cr. Different samples of carbon steel slag, suspected of forming unstable spinels, belonging to different steel grade production, were also investigated. Both granulated (4 mm) and milled (<100 μm) slag were analyzed. Scanning Electron Microscopy coupled with Energy Dispersive Spectroscopy (SEM-EDS) analyses were carried out to measure the local chemical composition of Cr-bearing phases. This data was correlated with slag basicity (by X-Ray Fluorescence: XRF), spinel fraction (by X-Ray Diffraction: XRD), and Cr leaching (by Inductively Coupled Plasma Mass Spectrometry: ICP-MS). The main results indicate that the increase of the slag basicity implies an increase of the impurity content (Ca, Si) in the spinel, also over-saturated by Cr. This aspect, coupled with spinel geometrical features, seems to justify the unexpected Cr leaching of some slag samples. Basicity does not influence the chemistry of wustite, thus excluding it as an additional Cr leaching source.

scholarly journals Geophagic Clays from Cameroon: Provenance, Metal Contamination and Health Risk Assessment

2021 ◽  
Vol 18 (16) ◽  
pp. 8315
Author(s):  
Georges-Ivo Ekosse ◽  
George Elambo Nkeng ◽  
Nenita Bukalo ◽  
Olaonipekun Oyebanjo
Keyword(s):  
Health Risk ◽  
Inductively Coupled Plasma ◽  
Risk Index ◽  
Human Health Risk ◽  
Carcinogenic Risk ◽  
Anthropogenic Sources ◽  
Contamination Assessment ◽  
X Ray ◽  
Inductively Coupled ◽  
Plasma Mass Spectrometry

This study assessed the mineralogical and geochemical characteristics of geophagic clays sold in some markets in Cameroon to ascertain their provenance, contamination status and human health risk. To achieve this, 40 samples from 13 markets in Cameroon were purchased and analysed using X-ray diffractometry, X-ray fluorescence and laser ablation inductively coupled plasma mass spectrometry for their mineralogy and geochemistry, respectively. The geophagic clays were dominantly made up of kaolinite and quartz. Their chemistry was dominated by SiO2, Al2O3 and LOI with means of 48.76 wt%, 32.12 wt% and 13.93 wt%, respectively. The major, trace and rare earth elements data showed that these geophagic clays were predominantly derived from felsic rocks. The contamination assessment indicated no enrichment of metals from anthropogenic sources, except for Zn in samples from Acacia, Madagascar and Mfoudi markets. The index of geo-accumulation indicated no contamination to moderate contamination of the clays. The non-carcinogenic index values for Fe, Co, Cr, Cu, Ni, Pb and Zn were generally less than 1, suggesting no non-carcinogenic risk exposure to children and adults consuming the geophagic clays from these metals. The carcinogenic risk index (TCR) for Ni and Cr were above 10−6, which implies that children and adults are vulnerable to minimal carcinogenic health risk. The TCR values from Ni posed the highest risk, especially to children consuming clays from some markets.

scholarly journals Characterization of Fly Ash Generated from Matla Power Station in Mpumalanga, South Africa

2012 ◽  
Vol 9 (4) ◽  
pp. 1788-1795 ◽  
Author(s):  
Olushola S. Ayanda ◽  
Olalekan S. Fatoki ◽  
Folahan A. Adekola ◽  
Bhekumusa J. Ximba
Keyword(s):  
Fly Ash ◽  
Inductively Coupled Plasma ◽  
Coal Fly Ash ◽  
Harmful Effect ◽  
Point Of Zero Charge ◽  
X Ray Diffraction ◽  
Power Station ◽  
X Ray ◽  
Inductively Coupled ◽  
Plasma Mass Spectrometry

In this study, fly ash was obtained from Matla power station and the physicochemical properties investigated. The fly ash was characterized by x-ray fluorescence, x-ray diffraction, scanning electron microscopy, and inductively coupled plasma mass spectrometry. Surface area, particle size, ash and carbon contents, pH, and point of zero charge were also measured. The results showed that the fly ash is alkaline and consists mainly of mullite (Al6Si2O13) and quartz (SiO2). Highly toxic metals As, Sb, Cd, Cr, and Pb as well as metals that are essential to health in trace amounts were also present. The storage and disposal of coal fly ash can thus lead to the release of leached metals into soils, surface and ground waters, find way into the ecological systems and then cause harmful effect to man and its environments.

scholarly journals Mineralogy and Geochemistry of the No. 5-2 High-Sulfur Coal from the Dongpo Mine, Weibei Coalfield, Shaanxi, North China, with Emphasis on Anomalies of Gallium and Lithium

Minerals ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 402 ◽  
Author(s):  
Qin ◽  
Cao ◽  
Wei ◽  
Wang ◽  
Liu
Keyword(s):  
Inductively Coupled Plasma ◽  
Northern China ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Taiyuan Formation ◽  
Reflected Light ◽  
Plasma Mass Spectrometry ◽  
Geological Factors ◽  
Felsic Volcanic

This paper reports the mineral compositions and geochemical characteristics of the No. 5-2 high-sulfur coal (Taiyuan Formation) from Dongpo Mine, Weibei Coalfield, Shaanxi, Northern China via transmitted and reflected light microscopy, scanning electron microscope equipped with an energy-dispersive X-ray spectrometer (SEM-EDS), X-ray diffraction (XRD), inductively coupled plasma mass spectrometry (ICP-MS), and X-ray fluorescence spectrometry (XRF). We also confirmed the input of intermediate-felsic volcanic ashes into the Taiyuan Formation coals in Dongpo Mine, Weibei Coalfield. The results show that Dongpo coals are enriched in Ga and Li compared to the average values for world hard coals, and they are depleted in Al2O3 compared to Chinese coals. The coal low temperature ash contains kaolinite, illite, quartz, calcite, pyrite, and to a lesser extent, chlorite, plagioclase, dolomite, ankerite, and apatite. The concentration anomalies of Ga and Li in No. 5-2 high-sulfur coal were not caused by the Benxi Formation Bauxite, but by the influence of multiple geological factors. The Middle Proterozoic moyite from the Yinshan Oldland led to the slightly higher Ga and Li contents of the No. 5-2 coal than those in world hard coals. Input of synchronization volcanic ash, injection of hydrothermal fluids during the syngenetic or early diagenetic stages and influence of seawater further contributed to the Ga and Li enrichment of the No. 5-2 coal.

scholarly journals Fe-Containing MOFs as Seeds for the Preparation of Highly Active Fe/Al-SBA-15 Catalysts in the NAlkylation of Aniline

Molecules ◽  
2019 ◽  
Vol 24 (15) ◽  
pp. 2695 ◽  
Author(s):  
Mhadmhan ◽  
Marquez-Medina ◽  
Romero ◽  
Reubroycharoen ◽  
Luque
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Catalytic Performance ◽  
Alkylation Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Highly Active ◽  
Milling Method ◽  
Plasma Mass Spectrometry

We have successfully incorporated iron species into mesoporous aluminosilicates (AlSBA15) using a simple mechanochemical milling method. The catalysts were characterized by nitrogen physisorption, inductively coupled plasma mass spectrometry (ICP-MS), pyridine (PY) and 2,6-dimethylpyridine (DMPY) pulse chromatography titration, powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX). The catalysts were tested in the N-alkylation reaction of aniline with benzyl alcohol for imine production. According to the results, the iron sources, acidity of catalyst and reaction conditions were important factors influencing the reaction. The catalyst showed excellent catalytic performance, achieving 97% of aniline conversion and 96% of imine selectivity under optimized conditions.

Sign in / Sign up

Export Citation Format

Share Document