scholarly journals Large-Eddy Simulations on the Effects of Two Wind Passage Types between Buildings on the Airflow and Drag Characteristics

Atmosphere ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1646
Author(s):  
Lu Wang ◽  
Jing Liu ◽  
Cunyan Jiang ◽  
Biao Li ◽  
Di Song ◽  
...  
Keyword(s):  
Urban Areas ◽  
Urban Canopy ◽  
Large Eddy Simulations ◽  
Wake Region ◽  
Local Wind ◽  
Drag Forces ◽  
Large Eddy ◽  
Building Array ◽  
The Mean ◽  
The Individual

Passages between buildings comprise the airflow path through the buildings, and the wind passage is often studied in terms of two buildings located parallel or at a certain angle. From the perspective of urban areas, the wind passage can be considered the series connection of all local wind passages between each row of buildings. Whether the central axis of each local wind passage is collinear or not, the wind passages of the building array can be summarized as distorted and streamlined types. Large-eddy simulations (LESs) are employed to assess the impacts of the above two wind passage types on the airflow and drag characteristics. The mean, unsteady flow fields and the drag distributions are discussed to assess the effects of wind passages types. Span-wise airflow was found in the wake region in the case of distorted wind passages (DWP), whereas the recirculating vortices dominated the wake region for the case of streamlined wind passages (SWP). Span-wise airflow enhanced the mean stream-wise velocity U and span-wise velocity U in the wake region, decreased U in the wind passage region, and increased dispersive stress 〈V˜2〉 and 〈U˜2〉 within the urban canopy and the peak Reynolds stress above the urban canopy. Further, it strengthened the individual drag forces of buildings and the fluctuations of span-wise and stream-wise individual drag forces. The air of DWP penetrated deeper than SWP. These findings provide theory and data support for better design of wind passages between buildings and may serve as a foundation for urban design and planning.

scholarly journals Large-Eddy Simulations of a Drizzling, Stratocumulus-Topped Marine Boundary Layer

2009 ◽  
Vol 137 (3) ◽  
pp. 1083-1110 ◽  
Author(s):  
Andrew S. Ackerman ◽  
Margreet C. vanZanten ◽  
Bjorn Stevens ◽  
Verica Savic-Jovcic ◽  
Christopher S. Bretherton ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Marine Boundary Layer ◽  
Cloud Water ◽  
Large Eddy Simulations ◽  
Cloud Base ◽  
Entrainment Rate ◽  
Liquid Water Path ◽  
Average Maximum ◽  
Large Eddy ◽  
The Mean

Abstract Cloud water sedimentation and drizzle in a stratocumulus-topped boundary layer are the focus of an intercomparison of large-eddy simulations. The context is an idealized case study of nocturnal stratocumulus under a dry inversion, with embedded pockets of heavily drizzling open cellular convection. Results from 11 groups are used. Two models resolve the size distributions of cloud particles, and the others parameterize cloud water sedimentation and drizzle. For the ensemble of simulations with drizzle and cloud water sedimentation, the mean liquid water path (LWP) is remarkably steady and consistent with the measurements, the mean entrainment rate is at the low end of the measured range, and the ensemble-average maximum vertical wind variance is roughly half that measured. On average, precipitation at the surface and at cloud base is smaller, and the rate of precipitation evaporation greater, than measured. Including drizzle in the simulations reduces convective intensity, increases boundary layer stratification, and decreases LWP for nearly all models. Including cloud water sedimentation substantially decreases entrainment, decreases convective intensity, and increases LWP for most models. In nearly all cases, LWP responds more strongly to cloud water sedimentation than to drizzle. The omission of cloud water sedimentation in simulations is strongly discouraged, regardless of whether or not precipitation is present below cloud base.

Disruption of the bottom log layer in large-eddy simulations of full-depth Langmuir circulation

2012 ◽  
Vol 699 ◽  
pp. 79-93 ◽  
Author(s):  
A. E. Tejada-Martínez ◽  
C. E. Grosch ◽  
N. Sinha ◽  
C. Akan ◽  
G. Martinat
Keyword(s):  
Gravity Waves ◽  
Large Eddy Simulations ◽  
Stokes Drift ◽  
Navier Stokes ◽  
Wake Region ◽  
Langmuir Circulation ◽  
Mean Velocity ◽  
Wave Forcing ◽  
Large Eddy ◽  
Shear Current

AbstractWe report on disruption of the log layer in the resolved bottom boundary layer in large-eddy simulations (LES) of full-depth Langmuir circulation (LC) in a wind-driven shear current in neutrally-stratified shallow water. LC consists of parallel counter-rotating vortices that are aligned roughly in the direction of the wind and are generated by the interaction of the wind-driven shear with the Stokes drift velocity induced by surface gravity waves. The disruption is analysed in terms of mean velocity, budgets of turbulent kinetic energy (TKE) and budgets of TKE components. For example, in terms of mean velocity, the mixing due to LC induces a large wake region eroding the classical log-law profile within the range $90\lt { x}_{3}^{+ } \lt 200$. The dependence of this disruption on wind and wave forcing conditions is investigated. Results indicate that the amount of disruption is primarily determined by the wavelength of the surface waves generating LC. These results have important implications for turbulence parameterizations for Reynolds-averaged Navier–Stokes simulations of the coastal ocean.

scholarly journals The Role of Wave-Induced Coriolis–Stokes Forcing on the Wind-Driven Mixed Layer

2005 ◽  
Vol 35 (4) ◽  
pp. 444-457 ◽  
Author(s):  
Jeff A. Polton ◽  
David M. Lewis ◽  
Stephen E. Belcher
Keyword(s):  
Analytical Solution ◽  
Observational Data ◽  
Mixed Layer ◽  
Analytical Solutions ◽  
Eddy Viscosity ◽  
Large Eddy Simulations ◽  
Current Profile ◽  
Large Eddy ◽  
The Mean ◽  
Mean Current

Abstract The interaction between the Coriolis force and the Stokes drift associated with ocean surface waves leads to a vertical transport of momentum, which can be expressed as a force on the mean momentum equation in the direction along wave crests. How this Coriolis–Stokes forcing affects the mean current profile in a wind-driven mixed layer is investigated using simple models, results from large-eddy simulations, and observational data. The effects of the Coriolis–Stokes forcing on the mean current profile are examined by reappraising analytical solutions to the Ekman model that include the Coriolis–Stokes forcing. Turbulent momentum transfer is modeled using an eddy-viscosity model, first with a constant viscosity and second with a linearly varying eddy viscosity. Although the Coriolis–Stokes forcing penetrates only a small fraction of the depth of the wind-driven layer for parameter values typical of the ocean, the analytical solutions show how the current profile is substantially changed through the whole depth of the wind-driven layer. It is shown how, for this oceanic regime, the Coriolis–Stokes forcing supports a fraction of the applied wind stress, changing the boundary condition on the wind-driven component of the flow and hence changing the current profile through all depths. The analytical solution with the linearly varying eddy viscosity is shown to reproduce reasonably well the effects of the Coriolis–Stokes forcing on the current profile computed from large-eddy simulations, which resolve the three-dimensional overturning motions associated with the turbulent Langmuir circulations in the wind-driven layer. Last, the analytical solution with the Coriolis–Stokes forcing is shown to agree reasonably well with current profiles from previously published observational data and certainly agrees better than the standard Ekman model. This finding provides evidence that the Coriolis–Stokes forcing is an important mechanism in controlling the dynamics of the upper ocean.

Large Eddy Simulations of Flow Past Two Pipelines in Tandem in Close Proximity to the Seabed

2017 ◽  
Author(s):  
Zhong Li ◽  
Mia Abrahamsen Prsic ◽  
Muk Chen Ong ◽  
Boo Cheong Khoo
Keyword(s):  
Drag Coefficient ◽  
Recirculation Zone ◽  
Separation Distance ◽  
Large Eddy Simulations ◽  
Plane Wall ◽  
Scale Model ◽  
Tandem Cylinders ◽  
Flow Past ◽  
Large Eddy ◽  
The Mean

Three-dimensional Large Eddy Simulations (LES) with Smagorinsky subgrid scale model have been performed for the flow past two free-spanning marine pipelines in tandem placed in the vicinity of a plane wall at a very small gap ratio, namely G/D = 0.1, 0.3 and 0.5. The ratio of cylinder center-to-center distance to cylinder diameter, or pitch ratio, L/D, considered in the simulations is taken as L/D = 2 and 5. This work serves as an extension of Abrahamsen Prsic et al. (2015) [1]. In essence, six sets of simulations have been performed in the subcritical Reynolds number regime at Re = 1.31 × 104. Our major findings can be summarized as follows. (1) At both pitch ratios, the wall proximity has a decreasing effect on the mean drag coefficient of the upstream cylinder. At L/D = 2, the mean drag coefficient of the downstream cylinder is negative since it is located within the drag inversion separation distance. (2) At L/D = 2, a squarish cavity-like flow exists between the tandem cylinders and flow circulates within the cavity. A long lee-wake recirculation zone is found behind the downstream cylinder at G/D = 0.1. However, a much smaller lee-wake recirculation zone is noticed at L/D = 5 with G/D = 0.1. (3) At L/D = 2, the reattachment is biased to the bottom shear layer due towards the deflection from the plane wall, which leads to the formation of the slanted squarish cavity-like flow where the flow circulates between the tandem cylinders.

scholarly journals Turbulent Flow Fields Over a 3D Hill Covered by Vegetation Canopy Through Large Eddy Simulations

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3624 ◽  
Author(s):  
Zhenqing Liu ◽  
Yiran Hu ◽  
Yichen Fan ◽  
Wei Wang ◽  
Qingsong Zhou
Keyword(s):  
Three Dimensional ◽  
Flow Fields ◽  
Large Eddy Simulations ◽  
Wind Tunnel Experiments ◽  
Turbulence Structures ◽  
Large Eddy ◽  
Turbulence Kinetic Energy Budget ◽  
The Mean ◽  
Spanwise Rotation ◽  
The Hill

The flow fields over a simplified 3D hill covered by vegetation have been examined by many researchers. However, there is scarce research giving the three-dimensional characteristics of the flow fields over a rough 3D hill. In this study, large eddy simulations were performed to examine the coherent turbulence structures of the flow fields over a vegetation-covered 3D hill. The numerical simulations were validated by the comparison with the wind-tunnel experiments. Besides, the flow fields were systematically investigated, including the examinations of the mean velocities and root means square of the fluctuating velocities. The distributions of the parameters are shown in a three-dimensional way, i.e., plotting the parameters on a series of spanwise slices. Some noteworthy three-dimensional features were found, and the mechanisms were further revealed by assessing the turbulence kinetic energy budget and the spectrum energy. Subsequently, the instantaneous flow fields were illustrated, from which the coherent turbulence structures were clearly identified. Ejection-sweep motion was intensified just behind the hill crest, leading to a spanwise rotation. A group of vertical rotations were generated by the shedding of the vortex from the lateral sides of the hill.

The hybrid Euler–Lagrange procedure using an extension of Moffatt's method

2010 ◽  
Vol 661 ◽  
pp. 45-72 ◽  
Author(s):  
A. M. SOWARD ◽  
P. H. ROBERTS
Keyword(s):  
Fluid Dynamic ◽  
Fluid Motion ◽  
Large Eddy Simulations ◽  
Navier Stokes ◽  
Constant Density ◽  
Mean Flow ◽  
Tensor Calculus ◽  
Inviscid Incompressible Fluid ◽  
Large Eddy ◽  
The Mean

The hybrid Euler–Lagrange (HEL) description of fluid mechanics, pioneered largely by Andrews & McIntyre (J. Fluid Mech., vol. 89, 1978, pp. 609–646), has had to face the fact, in common with all Lagrangian descriptions of fluid motion, that the variables used do not describe conditions at the coordinate x, upon which they depend, but conditions elsewhere at some displaced position xL(x, t) = x + ξ(x, t), generally dependent on time t. To address this issue, we employ ‘Lie dragging’ techniques of general tensor calculus to extend a method introduced by Moffatt (J. Fluid Mech., vol. 166, 1986, pp. 359–378) in the fluid dynamic context, whereby the point x is dragged to xL(x, t) by a ‘fictitious steady flow’ η*(x, t) in a unit of ‘fictitious time’. Whereas ξ(x, t) is a Lagrangian concept intimately linked to the location xL(x, t), the ‘dragging velocity’ η*(x, t) has an essentially Eulerian character, because it describes the fictitious velocity at x itself. For the case of constant-density fluids, we show, using solenoidal η*(x, t) instead of solenoidal ξ(x, t), how the HEL theory can be cast into Eulerian form. A useful aspect of this Eulerian development is that the mean flow itself remains solenoidal, a feature that traditional HEL theories lack. Our method realizes the objective sought by Holm (Physica D, vol. 170, 2002, pp. 253–286) in his derivation of the Navier–Stokes–α equation, which is the basis of one of the methods currently employed to represent the sub-grid scales in large-eddy simulations. His derivation, based on expansion to second order in ξ, contained an error which, when corrected, implied a violation of Kelvin's theorem on the constancy of circulation in inviscid incompressible fluid. We show that this is rectified when the expansion is in η* rather than ξ, Kelvin's theorem then being satisfied to all orders for which the expansion converges. We discuss the implications of our approach using η* for the Navier–Stokes–α theory.

scholarly journals Evaluation of large-eddy simulations forced with mesoscale model output for a multi-week period during a measurement campaign

2017 ◽  
Vol 17 (11) ◽  
pp. 7083-7109 ◽  
Author(s):  
Rieke Heinze ◽  
Christopher Moseley ◽  
Lennart Nils Böske ◽  
Shravan Kumar Muppa ◽  
Vera Maurer ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Mesoscale Model ◽  
Large Eddy Simulations ◽  
Model Output ◽  
Synoptic Scale ◽  
High Definition ◽  
Shallow Cumulus ◽  
Large Eddy ◽  
Lidar Measurements ◽  
The Mean

Abstract. Large-eddy simulations (LESs) of a multi-week period during the HD(CP)2 (High-Definition Clouds and Precipitation for advancing Climate Prediction) Observational Prototype Experiment (HOPE) conducted in Germany are evaluated with respect to mean boundary layer quantities and turbulence statistics. Two LES models are used in a semi-idealized setup through forcing with mesoscale model output to account for the synoptic-scale conditions. Evaluation is performed based on the HOPE observations. The mean boundary layer characteristics like the boundary layer depth are in a principal agreement with observations. Simulating shallow-cumulus layers in agreement with the measurements poses a challenge for both LES models. Variance profiles agree satisfactorily with lidar measurements. The results depend on how the forcing data stemming from mesoscale model output are constructed. The mean boundary layer characteristics become less sensitive if the averaging domain for the forcing is large enough to filter out mesoscale fluctuations.

Resolving urban canopy flows: Scales, turbulence and boundary conditions in obstacle-resolving numerical models

2021 ◽  
Author(s):  
Benedikt Seitzer ◽  
Bernd Leitl ◽  
Frank Harms
Keyword(s):  
Boundary Layer ◽  
Boundary Conditions ◽  
Atmospheric Boundary Layer ◽  
Similarity Theory ◽  
Urban Canopy ◽  
Large Eddy Simulations ◽  
Roughness Sublayer ◽  
Boundary Layer Meteorol ◽  
Large Eddy ◽  
Near Wall

<p>Large-eddy simulations are increasingly used for studying the atmospheric boundary layer. With increasing computational resources even obstacle-resolving Large-eddy simulations became possible and will be used in urban climate studies more frequently. In these applications, grid sizes are in the order of a few meters. Whereas major urban structures can be resolved in general, details like aerodynamically rough surface structures can not be resolved explicitly. Based on the original fields of application, boundary conditions in Large-eddy simulations were initially formulated for surfaces of homogeneous roughness and for wall-distances much larger than the roughness sublayer height (Hultmark et al., 2013). The height of the roughness sublayer depends on the size of small-scale obstacles present on the surface exposed to the flow (Raupach et al., 1991). Typically, boundary conditions are evaluated between the surface and the first grid level. Thus, grid resolution in obstacle-resolved Large-Eddy simulations should also be a question of scales and therefore has to be chosen carefully (Basu and Lacser, 2017; Maronga et al., 2020). <br />In several wind tunnel experiments presented here, we measured the near-wall influence of differently scaled and shaped objects on a flow and its turbulence characteristics. Experimental setups were replicated numerically using the PALM model (Maronga et al. 2019). In a first, more generic experiment, the flow over horizontally homogeneous surfaces of different roughness was investigated. In a second experiment, the spatial separation of the turbulence scales was investigated in a more complex flow case. These experiments lead to considerations on model grid sizes in urban type Large-eddy simulations. The limitations of interpreting simulation results within the urban canopy layer are highlighted. There is an urgent need to reconsider how near-wall results of urban large-eddy simulations are generated and interpreted in the context of practical applications like flow and transport modelling in urban canopies. <br /><br /><em><strong>References</strong></em><br /><em>Basu, S. and Lacser, A. (2017). A Cautionary Note on the Use of Monin–Obukhov Similarity Theory in Very High-Resolution Large-Eddy Simulations. Boundary-Layer Meteorol, 163(2):351–355.</em></p> <p><em>Hultmark, M., Calaf, M., and Parlange, M. B. (2013). A new wall shearstress model for atmospheric boundary layer simulations. J Atmos Sci,70(11):3460–3470.</em></p> <p><em>Maronga, B., et al. (2020). Overview of the PALM model system 6.0. Geosci Model Dev Discussions, 06(June):1–63.</em></p> <p><em>Maronga, B., Knigge, C., and Raasch, S. (2020). An Improved Surface Boundary Condition for Large-Eddy Simulations Based on Monin–Obukhov Similarity Theory: Evaluation and Consequences forGrid Convergence in Neutral and Stable Conditions. Boundary-Layer Meteorol, 174(2):297–325.</em></p> <p><em>Raupach, M. R., Antonia, R. A., and Rajagopalan, S. (1991). Rough-wall turbulent boundary layers. Appl Mech Rev, 44(1):1–25</em></p>

scholarly journals On the Formulation and Universality of Monin–Obukhov Similarity Functions for Mean Gradients and Standard Deviations in the Unstable Surface Layer: Results from Surface-Layer-Resolving Large-Eddy Simulations

2017 ◽  
Vol 74 (4) ◽  
pp. 989-1010 ◽  
Author(s):  
Björn Maronga ◽  
Joachim Reuder
Keyword(s):  
Surface Layer ◽  
Standard Deviation ◽  
Large Eddy Simulations ◽  
Specific Humidity ◽  
Horizontal Wind ◽  
Convective Conditions ◽  
Similarity Functions ◽  
Large Eddy ◽  
The Mean ◽  
Standard Deviations

Abstract Surface-layer-resolving large-eddy simulations (LESs) of free-convective to near-neutral boundary layers are used to study Monin–Obukhov similarity theory (MOST) functions. The LES dataset, previously used for the analysis of MOST relationships for structure parameters, is extended for the mean vertical gradients and standard deviations of potential temperature, specific humidity, and wind. Also, local-free-convection (LFC) similarity is studied. The LES data suggest that the MOST functions for mean gradients are universal and unique. The data for the mean gradient of the horizontal wind display significant scatter, while the gradients of temperature and humidity vary considerably less. The LES results suggest that this scatter is mostly related to a transition from MOST to LFC scaling when approaching free-convective conditions and that it is associated with a change of the slope of the similarity functions toward the expected value from LFC scaling. Overall, the data show slightly, but consistent, steeper slopes of the similarity functions than suggested in literature. The MOST functions for standard deviations appear to be unique and universal when the entrainment from the free atmosphere into the boundary layer is sufficiently small. If entrainment becomes significant, however, we find that the standard deviation of humidity no longer follows MOST. Under free-convective conditions, the similarity functions should reduce to universal constants (LFC scaling). This is supported by the LES data, showing only little scatter, but displaying a systematic height dependence of these constants. Like for MOST, the LFC similarity constant for the standard deviation of specific humidity becomes nonuniversal when the entrainment of dry air reaches significant levels.

Sign in / Sign up

Export Citation Format

Share Document