scholarly journals Visible Light Photocatalytic Activity of Thin Film Coated on Polycarbonate Surface with N- and Ni-Codoped TiO2 Photocatalyst

Catalysts ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1237
Author(s):  
Byung-Geon Park ◽  
Chang-Ho Lee ◽  
Kyong-Hwan Chung
Keyword(s):  
Thin Film ◽  
Visible Light ◽  
Pathogenic Bacteria ◽  
Sol Gel ◽  
Photocatalytic Reaction ◽  
Tio2 Photocatalyst ◽  
E Coli ◽  
Amorphous Tio2 ◽  
Visible Light Photocatalytic ◽  
Decomposition Properties

N- and Ni-coated TiO2 (NNT) were prepared by a facile sol-gel method as a photosensitive photocatalyst to visible light. NNT sol was used to coat the surface of an LED lamp cap and body made of polycarbonate with a thin NNT film. The coated thin film was dried in an oven at 130 °C. This NNT thin film had an amorphous TiO2 structure and absorbed 600 nm of visible light. The decomposition properties of formaldehyde on the NNT photocatalyst after irradiation with visible light were investigated. The LED lamp was irradiated with visible light at 500–620 nm and 6 W. Formaldehyde was decomposed by a photocatalytic reaction by visible light irradiation on the NNT-coated polycarbonate surface. Escherichia coli (E. coli), Staphylococcus aureus, and Pseudomonas aeruginosa were also used to examine the sterilizing properties of pathogenic bacteria using an LED lamp kit. The pathogenic bacteria on the NNT-coated polycarbonate surface were sterilized by irradiation with visible light.

scholarly journals Fabrication of AgCl/Ag3PO4/graphitic carbon nitride heterojunctions for enhanced visible light photocatalytic decomposition of methylene blue, methylparaben and E. coli

RSC Advances ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 6383-6394 ◽  
Author(s):  
Haishuai Li ◽  
Linlin Cai ◽  
Xin Wang ◽  
Huixian Shi
Keyword(s):  
Methylene Blue ◽  
Visible Light ◽  
Photocatalytic Degradation ◽  
Visible Light Irradiation ◽  
Carbon Nitride ◽  
Light Irradiation ◽  
Graphitic Carbon Nitride ◽  
Photocatalytic Decomposition ◽  
E Coli ◽  
Visible Light Photocatalytic

A noval ternary nanocomposite AgCl/Ag3PO4/g-C3N4 was successfully synthesized for photocatalytic degradation of methylene blue, methylparaben and inactivation of E. coli under visible light irradiation, showing excellent photocatalytic degradation performance and stability.

scholarly journals Fabrication of a Novel AgBr/Ag2MoO4@InVO4 Composite with Excellent Visible Light Photocatalytic Property for Antibacterial Use

Nanomaterials ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1541
Author(s):  
Jie Zhang ◽  
Jia Wang ◽  
Qingjun Zhu ◽  
Binbin Zhang ◽  
Huihui Xu ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Staphylococcus Aureus ◽  
Pseudomonas Aeruginosa ◽  
Degradation Rate ◽  
Photocatalytic Property ◽  
Photocatalytic Reaction ◽  
Composite Photocatalyst ◽  
E Coli ◽  
Radical Trapping ◽  
Visible Light Photocatalytic

A novel AgBr/Ag2MoO4@InVO4 composite photocatalyst with different heterojunction structures was successfully constructed by compounding InVO4 with Ag2MoO4 and AgBr. According to the degradation, antibacterial and free radical trapping data, the photocatalytic antibacterial and antifouling activities of AgBr/Ag2MoO4@InVO4 composite were evaluated, and the corresponding photocatalytic reaction mechanism was proposed. Adding AgBr/Ag2MoO4@InVO4 composite, the degradation rate of ciprofloxacin (CIP) achieved 95.5% within 120 min. At the same time, the antibacterial rates of Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) achieved 99.99%. The AgBr/Ag2MoO4@InVO4 composite photocatalyst showed promising usage in photocatalytic antibacterial and purification areas.

scholarly journals Novel N-doped ZrO2 with enhanced visible-light photocatalytic activity for hydrogen production and degradation of organic dyes

RSC Advances ◽  
2018 ◽  
Vol 8 (13) ◽  
pp. 6752-6758 ◽  
Author(s):  
Yuanyang Wang ◽  
Yinghua Zhang ◽  
Haiqiang Lu ◽  
Yanxin Chen ◽  
Zhenmin Liu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Hydrogen Production ◽  
Visible Light ◽  
Nitrogen Source ◽  
Organic Dyes ◽  
Low Cost ◽  
Sol Gel ◽  
Gel Method ◽  
Sol Gel Method ◽  
Visible Light Photocatalytic

Two new types of N-doped ZrO2 photocatalysts ZON and AZON have been synthesized using ethylenediamine as the nitrogen source by a facile and low-cost sol–gel method.

scholarly journals Facile synthesis of mesoporous titanium dioxide doped by Ag-coated graphene with enhanced visible-light photocatalytic performance for methylene blue degradation

RSC Advances ◽  
2017 ◽  
Vol 7 (41) ◽  
pp. 25314-25324 ◽  
Author(s):  
Lin Xiao ◽  
Li Youji ◽  
Chen Feitai ◽  
Xu Peng ◽  
Li Ming
Keyword(s):  
Methylene Blue ◽  
Titanium Dioxide ◽  
Visible Light ◽  
Photocatalytic Performance ◽  
Solvothermal Method ◽  
Sol Gel ◽  
Facile Synthesis ◽  
Methylene Blue Degradation ◽  
Visible Light Driven ◽  
Visible Light Photocatalytic

A highly efficient and elaborately structured visible-light-driven catalyst composed of mesoporous TiO2 (MT) doped with Ag+-coated graphene (MT-Ag/GR) has been successfully fabricated by a sol–gel and solvothermal method.

Effect of ZnO on a Superhydrophilic Self-Cleaning Properties of TiO2/SiO2 Thin Film on Glass Slide Substrate

2015 ◽  
Vol 1131 ◽  
pp. 237-241 ◽  
Author(s):  
Akkarat Wongkaew ◽  
Chanida Soontornkallapaki ◽  
Naritsara Amhae ◽  
Wichet Lamai
Keyword(s):  
Thin Film ◽  
Contact Angle ◽  
Visible Light ◽  
Band Gap ◽  
Sol Gel ◽  
Dip Coating ◽  
Band Gap Energy ◽  
Gap Energy ◽  
Coating Method ◽  
Dip Coating Method

This work aims to study the effect of ZnO containing in TiO2/SiO2 film on the superhydrophilic property after exposed to different types of light. The metal solutions were prepared by sol-gel technique and the film was deposited on glass slides by dip coating method. The parameter studied was the amount of ZnO in the TiO2/SiO2 film. The contents of ZnO were 5-20% weight (increased by 5%). The amount of TiO2 was constant at 30% weight. The obtained films were analyzed for their roughness. The results indicated that film roughness changed according to the ZnO contents. With 5%ZnO in the thin film, the roughness was 0.726 nm while 20%ZnO obtained the roughness of 2.128 nm. UV-Vis spectrophotometer was used for measuring of transmittance of films. At wavelength of 550 nm, the transmittances of each film were greater than 90%. Band gap energy of each film was calculated from the transmittance data. It was found that the average band gap energy of the films was 2.47 eV. Then, the films contained various amount of ZnO were grouped into 2 sets. The first set was exposed to visible light while the other set was exposed to UV. The duration of exposure was 5 hr. Both sets of films after exposed to any light were kept in a black box controlled relative humidity of 85%. Each film was measured contact angle every day. It was found that the 30%TiO2/5%Zn/SiO2 film exposed to visible light showed the best superhydrophilic property. The contact angle was about 0-5° within 3 days. This may due to the reduction of band gap energy in the presence of ZnO in TiO2/SiO2 films to 2.41 eV and the roughness of the film.

Sign in / Sign up

Export Citation Format

Share Document