scholarly journals Residual Oxygen Effects on the Properties of MoS2 Thin Films Deposited at Different Temperatures by Magnetron Sputtering

Crystals ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1183
Author(s):  
Peiyu Wang ◽  
Xin Wang ◽  
Fengyin Tan ◽  
Ronghua Zhang
Keyword(s):  
Thin Films ◽  
Electrical Properties ◽  
Magnetron Sputtering ◽  
Deposition Rate ◽  
Deposition Temperature ◽  
Energy Dispersive Spectrometer ◽  
Rf Magnetron Sputtering ◽  
Glass Substrates ◽  
Different Temperatures ◽  
Oxygen Atoms

Molybdenum disulfide (MoS2) thin films were deposited at different temperatures (150 °C, 225 °C, 300 °C, 375 °C, and 450 °C) on quartz glass substrates and silicon substrates using the RF magnetron sputtering method. The influence of deposition temperature on the structural, optical, electrical properties and deposition rate of the obtained thin films was investigated by X-ray diffraction (XRD), Energy Dispersive Spectrometer (EDS), Raman, absorption and transmission spectroscopies, a resistivity-measuring instrument with the four-probe method, and a step profiler. It was found that the MoS2 thin films deposited at the temperatures of 150 °C, 225 °C, and 300 °C were of polycrystalline with a (101) preferred orientation. With increasing deposition temperatures from 150 °C to 300 °C, the crystallization quality of the MoS2 thin films was improved, the Raman vibrational modes were strengthened, the deposition rate decreased, and the optical transmission and bandgap increased. When the deposition temperature increased to above 375 °C, the molecular atoms were partially combined with oxygen atoms to form MoO3 thin film, which caused significant changes in the structural, optical, and electrical properties of the obtained thin films. Therefore, it was necessary to control the deposition temperature and reduce the contamination of oxygen atoms throughout the magnetron sputtering process.

Effect of film thickness on the structural and electrical properties of Ga-doped ZnO thin films prepared on glass and Al2O3 (0001) substrates by RF magnetron sputtering method

2009 ◽  
Vol 24 (2) ◽  
pp. 441-447 ◽  
Author(s):  
Seung Wook Shin ◽  
S.M. Pawar ◽  
Tae-Won Kim ◽  
Jong-Ha Moon ◽  
Jin Hyeok Kim
Keyword(s):  
Thin Films ◽  
Electrical Resistivity ◽  
Electrical Properties ◽  
Magnetron Sputtering ◽  
Film Thickness ◽  
Rf Magnetron Sputtering ◽  
Glass Substrates ◽  
Plane Orientation ◽  
Structural And Electrical Properties ◽  
Doped Zno

Thin films of Ga-doped ZnO (GZO) were prepared on glass and Al2O3 (0001) substrates by using RF magnetron sputtering at a substrate temperature of 350 °C, RF power of 175 W, and working pressure of 6 mTorr. The effect of film thickness and substrate type on the structural and electrical properties of the thin films was investigated. X-ray diffraction study showed that GZO thin films on glass substrates were grown as a polycrystalline hexagonal wurtzite phase with a c-axis preferred, out-of-plane orientation and random in-plane orientation. However, GZO thin films on Al2O3 (0001) substrates were epitaxially grown with an orientation relationship of . The structural images from scanning electron microscopy and atomic force microscopy showed that the GZO thin films on glass substrates had a rougher surface morphology than those on Al2O3 (0001) substrates. The electrical resistivity of 1000 nm-thick GZO thin films grown on glass and Al2O3 (0001) substrates was 3.04 × 10−4 Ωcm and 1.50 × 10−4 Ωcm, respectively. It was also found that the electrical resistivity difference between the films on the two substrates decreased from 9.48 × 10−4 Ωcm to 1.45 × 10−4 Ωcm with increasing the film thickness from 100 nm to 1000 nm.

scholarly journals Optical and Electrical Properties of Thin Films of CuS Nanodisks Ensembles Annealed in a Vacuum and Their Photocatalytic Activity

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
J. Santos Cruz ◽  
S. A. Mayén Hernández ◽  
F. Paraguay Delgado ◽  
O. Zelaya Angel ◽  
R. Castanedo Pérez ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Hydrogen Peroxide ◽  
Photocatalytic Activity ◽  
Electrical Properties ◽  
Absolute Temperature ◽  
Glass Substrates ◽  
Transmission Electron ◽  
Different Temperatures ◽  
Blue Solution

Effects on the optical, electrical, and photocatalytic properties of undoped CuS thin films nanodisks vacuum annealed at different temperatures were investigated. The chemical bath prepared CuS thin films were obtained at 40°C on glass substrates. The grain size of13.5±3.5 nm was computed directly from high-resolution transmission electron microscopy (HRTEM) images. The electrical properties were measured by means of both Hall effect at room temperature and dark resistivity as a function of the absolute temperature 100–330 K. The activation energy values were calculated as 0.007, 0.013, and 0.013 eV for 100, 150, and 200°C, respectively. The energy band gap of the films varied in the range of 1.98 up to 2.34 eV. The photocatalytic activity of the CuS thin film was evaluated by employing the degradation of aqueous methylene blue solution in the presence of hydrogen peroxide. The CuS sample thin film annealed in vacuum at 150°C exhibited the highest photocatalytic activity in presence of hydrogen peroxide.

Silicon Germanium Oxide (SixGeyO1-x-y) Infrared Sensitive Material for Uncooled Detectors

2010 ◽  
Vol 1245 ◽  
Author(s):  
Reza Anvari ◽  
Qi Cheng ◽  
Muhammad Lutful Hai ◽  
Truc Phan Bui ◽  
A. J. Syllaios ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Properties ◽  
Magnetron Sputtering ◽  
Silicon Germanium ◽  
Room Temperature ◽  
Rf Magnetron Sputtering ◽  
Germanium Oxide ◽  
Temperature Coefficient Of Resistance ◽  
Sensitive Material

AbstractThis paper presents the formation and the characterization of silicon germanium oxide (SixGeyO1-x-y) infrared sensitive material for uncooled microbolometers. RF magnetron sputtering was used to simultaneously deposit Si and Ge thin films in an Ar/O2 environment at room temperature. The effects of varying Si and O composition on the thin film's electrical properties which include temperature coefficient of resistance (TCR) and resistivity were investigated. The highest achieved TCR and the corresponding resistivity at room temperature were -5.41 %/K and 3.16×103 ohm cm using Si0.039Ge0.875O0.086 for films deposited at room temperature.

RF Magnetron Sputtering Processed Transparent Conductive Aluminum Doped ZnO thin Films with Excellent Optical and Electrical Properties

2021 ◽  
Author(s):  
Chunhu Zhao ◽  
Junfeng Liu ◽  
Yixin Guo ◽  
Yanlin Pan ◽  
Xiaobo Hu ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Properties ◽  
Magnetron Sputtering ◽  
Carrier Concentration ◽  
Rf Magnetron Sputtering ◽  
Zno Thin Films ◽  
Band Model ◽  
Deposition Condition ◽  
Optical And Electrical Properties ◽  
Doped Zno

Abstract Aluminum doped ZnO thin films (AZO), which simultaneously transmit light and conduct electrical current, are widely applied in photovoltaic devices. To achieve high performance AZO thin films, the effects of RF magnetron sputtering conditions on the optical and electrical properties of the films has been explored. The optimized AZO thin films exhibit strong (002) orientated growth with hexagonal wurtzite structure. The minimum resistivity of 0.9Í10-3 Ω·cm, the highest carrier concentration of 2.8Í1020 cm-3, the best Hall mobility of 22.8 cm2·(V·s)-1 and average transmittance above 85% can be achieved at the optimum deposition condition of 0.2 Pa, 120 W and 200 °C. Considering the single parabolic band model, the bandgap shift by carrier concentration of the films can be attributed to the Burstein-Moss effect. The results indicate that RF magnetron sputtered AZO thin films are promising for solar cell applications relying on front contact layers.

Sign in / Sign up

Export Citation Format

Share Document