scholarly journals Comparative Analysis of the Differences in Dentofacial Morphology According to the Tongue and Lip Pressure

Diagnostics ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 503
Author(s):  
Yoo-Sun Lee ◽  
Jiho Ryu ◽  
Seung-Hak Baek ◽  
Won Hee Lim ◽  
Il-Hyung Yang ◽  
...  
Keyword(s):  
Muscle Force ◽  
Tongue Pressure ◽  
Maxillary Incisor ◽  
Oral Performance ◽  
Anterior Teeth ◽  
Facial Height ◽  
Lateral Cephalograms ◽  
Skeletal Pattern ◽  
Mixed Pattern ◽  
Posterior Tongue

The aim of this study was to evaluate the effects of the tongue and lip pressure on dentofacial morphology. The subjects comprised 194 patients with malocclusion. Anterior and posterior tongue elevation and lip pressures were evaluated using the Iowa Oral Performance Instrument (IOPI) device. The lateral cephalograms of each subject were traced and digitized to perform the analysis. Statistical analysis was used to investigate the relationship between perioral muscle force and the cephalometric variables. Anterior and posterior tongue pressure was both higher in males than in females. No sex difference in lip pressure was observed. The group with a low posterior tongue pressure showed a short ramus height, short posterior facial height, and clockwise-rotated mandible. On the other hand, lip pressure had a significant influence on maxillary incisor angulation. Skeletal pattern was not found to be significantly related with lip pressure. The anterior tongue pressure appeared as a mixed pattern of the two results. Tongue pressure was related to skeletal measurements, such as short posterior facial height, and lip pressure was related to the angulation of the anterior teeth. This study suggests that there may be differences in dentofacial morphology according to the differences in perioral muscle force.

Lingual Propulsive Pressures Across Consistencies Generated by the Anteromedian and Posteromedian Tongue by Healthy Young Adults

2012 ◽  
Vol 55 (3) ◽  
pp. 960-972 ◽  
Author(s):  
Laura L. Gingrich ◽  
Julie A. G. Stierwalt ◽  
Carlin F. Hageman ◽  
Leonard L. LaPointe
Keyword(s):  
Young Adults ◽  
Gender Difference ◽  
Repeated Measures ◽  
Tongue Pressure ◽  
Oral Performance ◽  
Repeated Measures Analysis ◽  
Bolus Viscosity ◽  
Bolus Propulsion ◽  
Posterior Tongue ◽  
Healthy Participants

Purpose In the present study, the authors investigated lingual propulsive pressures generated in the normal swallow by the anterior and posterior lingual segments for various consistencies and maximum isometric tasks. Method Lingual pressures for saliva, thin, and honey-thick liquid boluses were measured via the Iowa Oral Performance Instrument (IOPI Medical, Carnation, WA) at both anteromedian and posteromedian lingual segments of 62 healthy participants, ages 18–34 years (30 men, 32 women). Results A repeated-measures analysis of variance revealed that all lingual swallowing pressures were significantly greater at the anteromedian segment than at the posteromedian segment. Gender was not a significant factor; however, women exhibited greater swallowing pressures across all conditions. Lingual pressures increased as bolus viscosity increased. No significant interactions existed. Analysis of a subset of 30 participants revealed that men exhibited greater maximal isometric pressure at the anteromedian segment than women, with no significant gender difference at the posteromedian segment. A significantly higher percentage of maximum isometric tongue pressure was exerted by the posteromedian tongue than by the anteromedian tongue. Conclusion Findings suggest that greater amplitudes of lingual pressures are generated during normal swallowing at the anteromedian lingual segment; however, a greater percentage of maximum isometric tongue pressure was exerted by the posteromedian lingual segment, suggesting increased effort by the posterior tongue during bolus propulsion.

scholarly journals The difference between Begg and Straightwire appliances on molar position, occlusal plane angle, and anterior and posterior facial height changes

2020 ◽  
Vol 53 (4) ◽  
pp. 223
Author(s):  
Dewi Sartika Santoso ◽  
C. Christnawati ◽  
Cendrawasih Andusyana Farmasyanti
Keyword(s):  
Orthodontic Treatment ◽  
Good Condition ◽  
Class I ◽  
Permanent Teeth ◽  
Occlusal Plane ◽  
Plane Angle ◽  
Anterior Teeth ◽  
Facial Height ◽  
Lateral Cephalograms ◽  
The Difference

Background: Bimaxillary and bidental protrusion Class I Angle malocclusions have a characteristic convex facial profile and protrusion lips due to the labial inclination of the anterior teeth. Extraction of the first four premolars is the most common choice for orthodontic treatment of these cases when all the permanent teeth are complete and in good condition. Orthodontic treatment can be performed using the Begg or Straightwire techniques. Purpose: This study aims to investigate the difference in the effect of orthodontic treatment with Begg and Straightwire appliances on molar position, occlusal plane, and anterior and posterior facial height. Methods: Sixty pairs of lateral cephalograms before and after the treatment of patients with bimaxillary and bidental protrusive Angle malocclusion Class I, aged 18–35 years old, who underwent orthodontic treatment using the Begg and Straightwire techniques with the extraction of all first premolars that met the inclusion criteria. Data analysis was performed using two-way repeated analysis of variance (p<0.05) and Pearson correlation (p<0.05). Results: Molar position, occlusal plane angle, and anterior and posterior facial heights increased significantly after the Begg technique treatment and decreased significantly after the Straightwire technique treatment (p<0.05), but there were no significant differences between the four variables in the two techniques (p>0.05). Medium correlation was found between variables in both the Begg and Straightwire techniques. Conclusion: Molars were extruded and mesialized and the occlusal plane angle and height of the anterior and posterior faces increased after the Begg appliances treatment. The molars moved mesially and occlusally and there was a decrease in the occlusal plane angle, as well as the height of the anterior and posterior faces, after treatment with the Straightwire appliances. However, there was no difference between the two techniques.

Intrusion of the maxillary posterior teeth with a single buccal mini-implant positioned bilaterally in young adults with a tendency towards hyperdivergence: A clinical study

2022 ◽  
pp. 146531252110710
Author(s):  
A Sumathi Felicita ◽  
Thameem UL Wahab
Keyword(s):  
Vertical Plane ◽  
Young Patients ◽  
Treatment Protocol ◽  
Posterior Teeth ◽  
Permanent Molar ◽  
Mini Implants ◽  
Anterior Teeth ◽  
Facial Height ◽  
Lateral Cephalograms ◽  
Maxillary Molar

Background: Skeletal anchorage systems have been used for intrusion of the posterior teeth with satisfactory results. To achieve this, mini-implants are placed at anatomically challenging sites such as the palate or require several mini-implants to produce the desired effect. Objective: To determine the magnitude of intrusion of the maxillary posterior teeth achieved on a continuous arch wire using a single buccal mini-implant placed bilaterally in young patients with a tendency towards hyperdivergence and to evaluate its influence on the skeletal, dental and soft-tissue structures. Methods: A total of 17 patients with proclination of the anterior teeth, tendency towards hyperdivergence and clockwise rotation of the mandible were selected. First premolars were extracted as part of treatment protocol. A 0.022-MBT bracket prescription was used. Mini-implants were placed bilaterally on the buccal aspect at the mucogingival junction or slightly gingival to it between the maxillary second premolar and first permanent molar. A total of 200 g of intrusive force was placed from a continuous 0.019 × 0.025 inch stainless-steel arch wire to the mini-implant by means of an elastomeric thread on both sides. Lateral cephalograms and study models were taken before the start of intrusion and six months later. Parametric and non-parametric tests were done to assess treatment results. Results: Significant intrusion was observed in the maxillary molar and premolar region with tendency towards intrusion in the anterior region. There was significant decrease in lower anterior facial height (LAFH) with anti-clockwise mandibular rotation, decrease in facial proportion index and total facial height. No changes were observed in the transverse plane. Conclusion: Intrusion of the permanent maxillary molar can be achieved on a continuous arch wire with a single buccal mini-implant placed bilaterally with improvement in facial aesthetics, especially in the vertical plane. This method may be beneficial in patients with borderline vertical discrepancy treated with conventional friction mechanics during space closure after first premolar extractions.

scholarly journals Analysis of Labial and Lingual Strength among Healthy Chinese Adults in Taiwan

2020 ◽  
Vol 17 (21) ◽  
pp. 7904
Author(s):  
Shang-Jung Wu ◽  
Chun-Chieh Wang ◽  
Feng-Yu Lin ◽  
Kai-Yu Tseng ◽  
Yueh-Juen Hwu
Keyword(s):  
Objective Assessment ◽  
Mean Value ◽  
Tongue Pressure ◽  
Tongue Strength ◽  
Oral Performance ◽  
Chinese Adults ◽  
Strength Parameters ◽  
A Value ◽  
Healthy Chinese ◽  
Posterior Tongue

This study collected 11 parameters regarding the labial and lingual strength for maximum isometric and swallowing tasks among 150 healthy Chinese adults in Taiwan. Measurements were performed using the Iowa Oral Performance Instrument (IOPI). All of the labial and lingual strength parameters were measured three times. The maximal value of three trials represents the pressure of every parameter. The overall mean (±standard deviation) and maximum isometric pressures of the lips, anterior tongue, and posterior tongue were 24.81 ± 5.64, 55.95 ± 14.13, and 53.23 ± 12.24 kPa, respectively. The mean value of posterior tongue strength was less than that of the anterior tongue by approximately 5%. The percentages of maximum isometric tongue pressure during the swallowing of saliva and water were 85% and 80% for the anterior tongue and 90% and 81% for the posterior tongue, respectively. The average endurances for the anterior tongue and posterior tongue were 13.86 ± 7.08 and 10.06 ± 5.40 s, respectively. The maximum isometric pressures were greater than both the saliva and water swallowing pressures, and the saliva swallowing pressures were greater than the water swallowing pressures. A value of 33 kPa in maximum isometric pressure could serve as a demarcation of weak tongue strength for healthy Chinese adults. As for the repeated trials of labial and lingual strength, there were no statistically significant differences for any of the pressures obtained from the 11 labial and lingual strength parameters. The normative data can be used for the objective assessment of labial and lingual strength in healthy Chinese adults.

scholarly journals A Comparison of Craniofacial Characteristics between Two Different Adult Populations with Class II Malocclusion—A Cross-Sectional Retrospective Study

Biology ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 438
Author(s):  
Arvind Sivakumar ◽  
Prasad Nalabothu ◽  
Huyen Nguyen Thanh ◽  
Gregory S. Antonarakis
Keyword(s):  
Growth Pattern ◽  
Class Ii ◽  
Class Ii Malocclusion ◽  
South Indian Population ◽  
The South ◽  
Facial Height ◽  
South Indian ◽  
Mandibular Plane ◽  
Lateral Cephalograms ◽  
Craniofacial Characteristics

The dental, skeletal, and soft-tissue characteristics of a particular malocclusion can differ based on ethnicity, race, age, sex and geographical location with Class II malocclusion being one of the most prevalent malocclusions encountered in orthodontic clinical practice. The broad understanding of the characteristics of vertical skeletal and dental parameters in patients with Class II malocclusion can help clinicians to identify patterns and variations in the expression of this phenotype for better treatment outcomes. Hence, we compared the craniofacial characteristics of skeletal and dental Class II malocclusion traits from Indian and Vietnamese individuals to analyze the vertical skeletal and dental patterns in both population groups. The sample comprised of lateral cephalograms from 100 young adults with Class II malocclusion, of which fifty (25 males and 25 females) were from South India and the other 50 age- and sex-matched adults from Vietnam. The lateral cephalometric radiographs were digitized into anonymous image files and were traced and assessed for 16 vertical skeletal and dental parameters. The ANB angle was greater in males (+1.4 deg; p < 0.001) and females (+1.9 deg; p < 0.001) in the South Indian population. The Vietnamese males had a larger mandibular plane angle, articular angle, anterior facial height and lower anterior facial height compared to the Indian males. The Vietnamese females had larger mandibular plane and articular angles compared to the Indian females. The skeletal class II malocclusion was more severe in the South Indian compared to the Vietnamese adults. The Vietnamese sample showed a generalized tendency towards a more vertical skeletal growth pattern and in males this pattern seemed to be due to the dentoalveolar component. The Vietnamese females showed a tendency towards a vertical growth pattern, but without apparent contribution by the dentoalveolar component.

scholarly journals Morphological changes of the anterior alveolar bone due to retraction of anterior teeth: a retrospective study

2021 ◽  
Vol 17 (1) ◽  
Author(s):  
Qiannan Sun ◽  
Wenhsuan Lu ◽  
Yunfan Zhang ◽  
Liying Peng ◽  
Si Chen ◽  
...  
Keyword(s):  
Orthodontic Treatment ◽  
Alveolar Bone ◽  
Morphological Changes ◽  
Strong Positive Correlation ◽  
Anterior Teeth ◽  
Bone Width ◽  
Lateral Cephalograms ◽  
Labial Side ◽  
Incisor Retraction ◽  
Maxilla And Mandible

Abstract Backgroud To analyze the morphological changes of the anterior alveolar bone after the retraction of incisors in premolar extraction cases and the relationship between incisor retraction and remodeling of the alveolar base represented by points A and B displacements. Methods Pre- (T0) and post-treatment (T1) lateral cephalograms of 308 subjects in the maxilla and 154 subjects in the mandible who underwent the orthodontic treatment with extraction of 2 premolars in upper or lower arches were included. Alveolar bone width and height in both the maxillary and mandible incisor area were measured at T0 and T1 respectively. By superimposing the T0 and T1 cephalometric tracings, changes of points A and B, and the movement of the incisors were also measured. Then the correlation between incisor movement and the displacements of points A and B was analyzed. Results The alveolar bone width (ABW) showed a significant decrease in both maxilla and mandible (P < 0.001) except the labial side of the mandible (P > 0.05). The alveolar bone height (ABH) showed a significant increase in the labial side of maxilla and a significant decrease in the lingual side of maxilla and mandible. A strong positive correlation was verified between incisor movement and position changes of points A and B in both horizontal and vertical directions. Conclusions Anterior alveolar bone width and height generally decreased after orthodontic treatment. Incisor retraction led to significant position changes of points A and B. The decrease of anterior alveolar bone due to significant incisor retraction should be taken into account in treatment planning.

Growth Pattern in Skeletal Class I Malocclusion: A Cephalometric Study

2021 ◽  
Vol 11 (1) ◽  
pp. 49-54
Author(s):  
Sujal Amatya ◽  
Rabindra Man Shrestha ◽  
Shristi Napit
Keyword(s):  
Growth Pattern ◽  
Strong Correlation ◽  
Class I ◽  
Facial Growth ◽  
Skeletal Class ◽  
Facial Height ◽  
Lateral Cephalograms ◽  
Growth Modification ◽  
Cephalometric Study

Introduction: Great emphasis has been given to the evaluation of sagittal apical base relationship in orthodontic diagnosis and treatment planning. The prediction of magnitude and direction of facial growth based on sagittal relationship will help in orthodontic treatment with growth modification. The objective of the study is to assess the growth pattern in skeletal Class I malocclusion. Materials and Method: 104 subjects (52 male and 52 female) with the age between 18-30 years with Class I skeletal relation was selected from lateral cephalograms of patients visiting the Department of Orthodontics, Kantipur Dental College. The ANB angle was measured to assess the sagittal jaw relationship and the Jarabak’s ratio to access the growth pattern. Descriptive statistics were calculated for each parameter. Pearson’s test was done to evaluate the correlation between the parameters. Independent t-test was done to compare Anterior Facial height (AFH), Posterior Facial Height (PFH) and Jarabak’s ratio between male and female subjects. Result: Among the total subjects with skeletal Class I malocclusion; hyperdivergent growth pattern was least (10.57%), followed by normodivergent (18.26%) and hypodivergent growth pattern (71.15%). Mean Jarabak’s ratio for hyperdivergent, normodivergent and hypodivergent growth pattern were 58.65±1.94, 63.98±0.85 and 69.98±4.13 respectively. Very strong correlation was found between AFH and PFH in hyperdivergent (r = 0.821) and normodivergent group (r =0.978). Strong correlation was found in hypodivergent group between AFH and PFH (r =0.743). Also, strong correlation was found in hypodivergent group between PFH and Jarabak’s ratio (r =0.643). Conclusion: Hypodivergent growth pattern was the dominant growth pattern in skeletal Class I malocclusion. PFH influenced the determination of Jarabak’s ratio more than the AFH in hypodivergent growth pattern. Hypodivergent growth pattern is correlated with large SNB angle.

scholarly journals Diagnostic validity of different cephalometric analyses for assessment of the sagittal skeletal pattern

2018 ◽  
Vol 23 (5) ◽  
pp. 75-81 ◽  
Author(s):  
Maheen Ahmed ◽  
Attiya Shaikh ◽  
Mubassar Fida
Keyword(s):  
Reliability And Validity ◽  
Class I ◽  
Kappa Statistics ◽  
Class Iii ◽  
Validity And Reliability ◽  
Substantial Agreement ◽  
Lateral Cephalograms ◽  
Skeletal Pattern ◽  
Beta Angle ◽  
Final Group

Abstract Introduction: Numerous cephalometric analyses have been proposed to diagnose the sagittal discrepancy of the craniofacial structures. Objective: This study aimed at evaluating the reliability and validity of different skeletal analyses for the identification of sagittal skeletal pattern. Methods: A total of 146 subjects (males = 77; females = 69; mean age = 23.6 ± 4.6 years) were included. The ANB angle, Wits appraisal, Beta angle, AB plane angle, Downs angle of convexity and W angle were used to assess the anteroposterior skeletal pattern on lateral cephalograms. The sample was classified into Class I, II and III groups as determined by the diagnostic results of majority of the parameters. The validity and reliability of the aforementioned analyses were determined using Kappa statistics, sensitivity and positive predictive value (PPV). Results: A substantial agreement was present between ANB angle and the diagnosis made by the final group (k = 0.802). In the Class I group, Downs angle of convexity showed the highest sensitivity (0.968), whereas ANB showed the highest PPV (0.910). In the Class II group, ANB angle showed the highest sensitivity (0.928) and PPV (0.951). In the Class III group, the ANB angle, the Wits appraisal and the Beta angle showed the highest sensitivity (0.902), whereas the Downs angle of convexity and the ANB angle showed the highest PPV (1.00). Conclusion: The ANB angle was found to be the most valid and reliable indicator in all sagittal groups. Downs angle of convexity, Wits appraisal and Beta angle may be used as valid indicators to assess the Class III sagittal pattern.

scholarly journals CORRELATION BETWEEN CROWN LENGTH OF PERMANENT MAXILLARY ANTERIOR TEETH, FACIAL HEIGHT AND LENGTH OF HAND DIGITS WITH THE STATURE OF AN INDIVIDUAL.

2020 ◽  
pp. 42-46
Author(s):  
Thatchani G V ◽  
S.Babukuttan Pillai ◽  
Heera R
Keyword(s):  
Pearson Correlation ◽  
Body Height ◽  
Skeletal Remains ◽  
Personal Identification ◽  
Individual Identification ◽  
Mass Casualties ◽  
Crown Length ◽  
Anterior Teeth ◽  
Facial Height ◽  
Right Hand

BACKGROUND: Personal identification is defined as establishing the identity of an individual. One of the objectives of the medicolegal investigation is to estimate stature or height from various skeletal remains and body parts brought for examination. Teeth can be considered as an exceptional resource material for forensic investigations because of its high resistance capacity to withstand high temperatures in disasters during natural or manmade calamities. Teeth play a vital role in individual identification for medicolegal circumstances and identification of unknown skeletal remains during mass casualties. We did a pioneer study to correlate anatomical crown length of maxillary anterior teeth, facial height and right-hand digits length with the stature of an individual for personal identification in Southern Kerala population by formulating an equation. METHODS: A total of 250 volunteers participated in this study. The stature and anatomical crown length of maxillary anterior teeth, facial height, length of right-hand digits were measured. Statistical analysis was performed using computer software, Statistical Package for Social Sciences (SPSS) version 16.0 for Windows Operating System. Correlation between anatomical crown length of maxillary anterior teeth, facial height, length of right-hand digits with the stature of an individual was analyzed by Pearson correlation test. Regression analysis was used to get equations for estimation of stature from these parameters. CONCLUSION: The present study is possibly the first in Southern Kerala population that has attempted to estimate stature from anatomical crown length of permanent maxillary anterior teeth, facial height, and right-hand digits length by formulating a regression equation. We found some positive correlation between facial height and right-hand digits length with the stature of the individual. But there was no significant correlation between anatomical crown length of permanent maxillary anterior teeth with the stature of an individual. Although no definitive correlations could be established between anatomical crown length of permanent maxillary anterior teeth and stature or body height, the use of the established parameters will be helpful in the fields of forensic odontology and anthropology.

scholarly journals A prospective clinical trial of the effects produced by the Connecticut intrusion arch on the maxillary dental arch

2020 ◽  
Vol 90 (4) ◽  
pp. 500-506
Author(s):  
Alessandro Schwertner ◽  
Renato Rodrigues de Almeida ◽  
Renata Rodrigues de Almeida-Pedrin ◽  
Thais Maria Freire Fernandes ◽  
Paula Oltramari ◽  
...  
Keyword(s):  
Correction Method ◽  
Maxillary Incisor ◽  
Dental Arch ◽  
Deep Bite ◽  
Lateral Cephalograms ◽  
Distal Surface ◽  
The Mean ◽  
Maxillary Incisors ◽  
Group 2 ◽  
Group 1

ABSTRACT Objective To assess and compare the effects produced in the maxillary dental arch by means of Connecticut intrusion arch (CIA) with or without a cinch back on the distal end of the tube of the first molars. Materials and Methods This study included 44 patients with a mean age of 13.1 ± 1.8 years treated for deep bite with a CIA randomly divided into two groups: group 1 (G1), 22 patients with initial mean age of 12.72 ± 1.74 years treated with the CIA in the upper arch without a cinch back on the distal surface of the tube of the first molars, and group 2 (G2), 22 patients with an initial mean age of 13.67 ± 2.03 years treated with the CIA with a cinch back. Lateral cephalograms were available before treatment (T1) and after intrusion of maxillary incisors (T2). The mean treatment period was 5.5 ± 1.45 months. Intragroup and intergroup changes in the maxillary incisor and molar positions were analyzed by paired and independent t-tests associated with the Holm-Bonferroni correction method for multiple comparisons (P &lt; .05). Results There were significant differences between groups in terms of maxillary incisor displacement. The maxillary incisors flared labially (2.17°) and proclined (1.68 mm) in group 1, whereas a palatal inclination (−1.99°) and retroclination (−1.13 mm) was observed in group 2. No significant differences were found for the molar positions between the groups. Conclusions The presence or absence of a distal bend in CIA affects incisor tipping and proclination during intrusion mechanics.

Sign in / Sign up

Export Citation Format

Share Document