scholarly journals High-Performance Time Server Core for FPGA System-on-Chip

Electronics ◽  
2019 ◽  
Vol 8 (5) ◽  
pp. 528 ◽  
Author(s):  
Julian Viejo ◽  
Jorge Juan-Chico ◽  
Manuel J. Bellido ◽  
Paulino Ruiz-de-Clavijo ◽  
David Guerrero ◽  
...  
Keyword(s):  
High Performance ◽  
System On Chip ◽  
The Core ◽  
Performance Time ◽  
Network Time ◽  
Wide Range ◽  
Network Time Protocol ◽  
Field Programmable ◽  
And Performance ◽  
On Chip

This paper presents the complete design and implementation of a low-cost, low-footprint, network time protocol server core for field programmable gate arrays. The core uses a carefully designed modular architecture, which is fully implemented in hardware using digital circuits and systems. Most remarkable novelties introduced are a hardware-optimized timekeeping algorithm implementation, and a full-hardware protocol stack and automatic network configuration. As a result, the core is able to achieve similar accuracy and performance to typical high-performance network time protocol server equipment. The core uses a standard global positioning system receiver as time reference, has a small footprint and can easily fit in a low-range field-programmable chip, greatly scaling down from previous system-on-chip time synchronization systems. Accuracy and performance results show that the core can serve hundreds of thousands of network time clients with negligible accuracy degradation, in contrast to state-of-the-art high-performance time server equipment. Therefore, this core provides a valuable time server solution for a wide range of emerging embedded and distributed network applications such as the Internet of Things and the smart grid, at a fraction of the cost and footprint of current discrete and embedded solutions.

scholarly journals Low-Process–Voltage–Temperature-Sensitivity Multi-Stage Timing Monitor for System-on-Chip Applications

Electronics ◽  
2021 ◽  
Vol 10 (13) ◽  
pp. 1587
Author(s):  
Duo Sheng ◽  
Hsueh-Ru Lin ◽  
Li Tai
Keyword(s):  
High Performance ◽  
Power Reduction ◽  
System On Chip ◽  
Timing Information ◽  
Multi Stage ◽  
Dynamic Voltage ◽  
And Performance ◽  
On Chip ◽  
Maximum Measurement ◽  
Maximum Measurement Error

High performance and complex system-on-chip (SoC) design require a throughput and stable timing monitor to reduce the impacts of uncertain timing and implement the dynamic voltage and frequency scaling (DVFS) scheme for overall power reduction. This paper presents a multi-stage timing monitor, combining three timing-monitoring stages to achieve a high timing-monitoring resolution and a wide timing-monitoring range simultaneously. Additionally, because the proposed timing monitor has high immunity to the process–voltage–temperature (PVT) variation, it provides a more stable time-monitoring results. The time-monitoring resolution and range of the proposed timing monitor are 47 ps and 2.2 µs, respectively, and the maximum measurement error is 0.06%. Therefore, the proposed multi-stage timing monitor provides not only the timing information of the specified signals to maintain the functionality and performance of the SoC, but also makes the operation of the DVFS scheme more efficient and accurate in SoC design.

scholarly journals Industrial robot arm controller based on programmable System-on-Chip device

2021 ◽  
Vol 49 (4) ◽  
pp. 1025-1034
Author(s):  
Vo Cong
Keyword(s):  
Real Time ◽  
High Performance ◽  
Industrial Robot ◽  
Industrial Applications ◽  
System On Chip ◽  
Robot Arm ◽  
Single Chip ◽  
Arm Processor ◽  
Field Programmable ◽  
On Chip

Field-programmable gate arrays (FPGAs) and, recently, System on Chip (SoC) devices have been applied in a wide area of applications due to their flexibility for real-time implementations, increasing the processing capability on hardware as well as the speed of processing information in real-time. The most important applications based on FPGA/SoC devices are focused on signal/image processing, Internet of Things (IoT) technology, artificial intelligence (AI) algorithms, energy systems applications, automatic control and industrial applications. This paper develops a robot arm controller based on a programmable System-OnChip (SoC) device that combines the high-performance and flexibility of a CPU and the processing power of an FPGA. The CPU consists of a dual-core ARM processor that handles algorithm calculations, motion planning and manages communication and data manipulation. FPGA is mainly used to generate signals to control servo and read the feedback signals from encoders. Data from the ARM processor is transferred to the programmable logic side via the AXI protocol. This combination delivers superior parallel-processing and computing power, real-time performance and versatile connectivity. Additionally, having the complete controller on a single chip allows the hardware design to be simpler, more reliable, and less expensive.

Improving Performance-Power-Programmability in Space Avionics with Edge Devices: VBN on Myriad2 SoC

2021 ◽  
Vol 20 (3) ◽  
pp. 1-23
Author(s):  
Vasileios Leon ◽  
George Lentaris ◽  
Evangelos Petrongonas ◽  
Dimitrios Soudris ◽  
Gianluca Furano ◽  
...  
Keyword(s):  
Digital Signal ◽  
System On Chip ◽  
Core System ◽  
Proximity Operations ◽  
Space Instruments ◽  
Field Programmable ◽  
Commercial Off The Shelf ◽  
And Performance ◽  
On Chip ◽  
Key Enabling Technologies

The advent of powerful edge devices and AI algorithms has already revolutionized many terrestrial applications; however, for both technical and historical reasons, the space industry is still striving to adopt these key enabling technologies in new mission concepts. In this context, the current work evaluates an heterogeneous multi-core system-on-chip processor for use on-board future spacecraft to support novel, computationally demanding digital signal processors and AI functionalities. Given the importance of low power consumption in satellites, we consider the Intel Movidius Myriad2 system-on-chip and focus on SW development and performance aspects. We design a methodology and framework to accommodate efficient partitioning, mapping, parallelization, code optimization, and tuning of complex algorithms. Furthermore, we propose an avionics architecture combining this commercial off-the-shelf chip with a field programmable gate array device to facilitate, among others, interfacing with traditional space instruments via SpaceWire transcoding. We prototype our architecture in the lab targeting vision-based navigation tasks. We implement a representative computer vision pipeline to track the 6D pose of ENVISAT using megapixel images during hypothetical spacecraft proximity operations. Overall, we achieve 2.6 to 4.9 FPS with only 0.8 to 1.1 W on Myriad2 , i.e., 10-fold acceleration versus modern rad-hard processors. Based on the results, we assess various benefits of utilizing Myriad2 instead of conventional field programmable gate arrays and CPUs.

Design of Advanced High Performance Bus Tracer in System on Chip Using Matrix Based Compression for Low Power Applications

2020 ◽  
Vol 17 (4) ◽  
pp. 1852-1856
Author(s):  
P. Bhuvaneshwari ◽  
T. R. Jaya Chandra Lekha
Keyword(s):  
Low Power ◽  
High Performance ◽  
Performance Monitoring ◽  
Low Cost ◽  
System On Chip ◽  
Consumer Electronics ◽  
Compression Scheme ◽  
Control Signals ◽  
And Performance ◽  
On Chip

This project proposes multilayer advanced high-performance bus architecture for low power applications. The proposed AHB architecture consists of the bus arbiter and the bus tracer (A.R.M.A., 1999. Specification (Rev 2.0) ARM IHI0011A). The bus arbiter, which is self motivated selects the input packet based on the control signals of the incoming packet. So that arbitration leads to a maximum performance. The On-Chip bus is an important system-on-chip infrastructure that connects major hardware components. Monitoring the on-chip bus signals is crucial to the SoC debugging and performance analysis/optimization (Gu, R.T., et al., 2007. A Low Cost Tile-Based 3D Graphics Full Pipeline with Real-Time Performance Monitoring Support for OpenGL ES in Consumer Electronics. 2007 IEEE International Symposium on Consumer Electronics, June; IEEE. pp.1–6). But, such signals are difficult to observe since they are deeply embedded in a SoC and there are often no sufficient I/O pins to access these signals. Therefore, a straightforward approach is to embed a bus tracer in SoC to capture the bus signal trace and store the trace in on-chip storage such as the trace memory which could then be off loaded to outside world for analysis. The bus tracer is capable of capturing the bus trace with different resolutions, all with efficient built in compression mechanisms such as dictionary based compression scheme for address and control signals and differential compression scheme for data. To improve the compression ratio matrix based compression which is lossless compression is used instead of differential compression. This system is designed using Verilog HDL, simulated using Modelsim and synthesized using Xilinx software.

A high performance scalable fuzzy based modified Asymmetric Heterogene Multiprocessor System on Chip (AHt-MPSOC) reconfigurable architecture

2021 ◽  
pp. 1-12
Author(s):  
Arun Prasath Raveendran ◽  
Jafar A. Alzubi ◽  
Ramesh Sekaran ◽  
Manikandan Ramachandran
Keyword(s):  
High Performance ◽  
Standard Technique ◽  
System On Chip ◽  
Mixed Integer ◽  
Multiprocessor System ◽  
Compound System ◽  
Available Bandwidth ◽  
Mip Model ◽  
Fpga Chip ◽  
On Chip

This Ensuing generation of FPGA circuit tolerates the combination of lot of hard and soft cores as well as devoted accelerators on a chip. The Heterogene Multi-Processor System-on-Chip (Ht-MPSoC) architecture accomplishes the requirement of modern applications. A compound System on Chip (SoC) system designed for single FPGA chip, and that considered for the performance/power consumption ratio. In the existing method, a FPGA based Mixed Integer Programming (MIP) model used to define the Ht-MPSoC configuration by taking into consideration the sharing hardware accelerator between the cores. However, here, the sharing method differs from one processor to another based on FPGA architecture. Hence, high number of hardware resources on a single FPGA chip with low latency and power targeted. For this reason, a fuzzy based MIP and Graph theory based Traffic Estimator (GTE) are proposed system used to define New asymmetric multiprocessor heterogene framework on microprocessor (AHt-MPSoC) architecture. The bandwidths, energy consumption, wait and transmission range are better accomplished in this suggested technique than the standard technique and it is also implemented with a multi-task framework. The new Fuzzy control-based AHt-MPSoC analysis proves significant improvement of 14.7 percent in available bandwidth and 89.8 percent of energy minimized to various traffic scenarios as compared to conventional method.

Design of Router Supporting Multiply Routing Algorithm for NoC

2014 ◽  
Vol 981 ◽  
pp. 431-434
Author(s):  
Zhan Peng Jiang ◽  
Rui Xu ◽  
Chang Chun Dong ◽  
Lin Hai Cui
Keyword(s):  
Complex System ◽  
High Performance ◽  
Routing Algorithm ◽  
Network On Chip ◽  
System On Chip ◽  
Low Latency ◽  
Deterministic Routing ◽  
Key Features ◽  
Design Challenge ◽  
On Chip

Network on Chip(NoC)，a new proposed solution to solve global communication problem in complex System on Chip (SoC) design，has absorbed more and more researchers to do research in this area. Due to some distinct characteristics, NoC is different from both traditional off-chip network and traditional on-chip bus，and is facing with the huge design challenge. NoC router design is one of the most important issues in NoC system. The paper present a high-performance, low-latency two-stage pipelined router architecture suitable for NoC designs and providing a solution to irregular 2Dmesh topology for NoC. The key features of the proposed Mix Router are its suitability for 2Dmesh NoC topology and its capability of suorting both full-adaptive routing and deterministic routing algorithm.

Sign in / Sign up

Export Citation Format

Share Document