scholarly journals Hybrid Microgrid Energy Management and Control Based on Metaheuristic-Driven Vector-Decoupled Algorithm Considering Intermittent Renewable Sources and Electric Vehicles Charging Lot

Energies ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 3423 ◽  
Author(s):  
Tawfiq M. Aljohani ◽  
Ahmed F. Ebrahim ◽  
Osama Mohammed
Keyword(s):  
Energy Management ◽  
Electric Vehicles ◽  
Reactive Power ◽  
Renewable Energy Sources ◽  
Synchronous Generator ◽  
Photovoltaic System ◽  
Severe Condition ◽  
Electric Vehicle Charging ◽  
Bidirectional Converter ◽  
And Control

Energy management and control of hybrid microgrids is a challenging task due to the varying nature of operation between AC and DC components which leads to voltage and frequency issues. This work utilizes a metaheuristic-based vector-decoupled algorithm to balance the control and operation of hybrid microgrids in the presence of stochastic renewable energy sources and electric vehicles charging structure. The AC and DC parts of the microgrid are coupled via a bidirectional interlinking converter, with the AC side connected to a synchronous generator and portable AC loads, while the DC side is connected to a photovoltaic system and an electric vehicle charging system. To properly ensure safe and efficient exchange of power within allowable voltage and frequency levels, the vector-decoupled control parameters of the bidirectional converter are tuned via hybridization of particle swarm optimization and artificial physics optimization. The proposed control algorithm ensures the stability of both voltage and frequency levels during the severe condition of islanding operation and high pulsed demands conditions as well as the variability of renewable source production. The proposed methodology is verified in a state-of-the-art hardware-in-the-loop testbed. The results show robustness and effectiveness of the proposed algorithm in managing the real and reactive power exchange between the AC and DC parts of the microgrid within safe and acceptable voltage and frequency levels.

scholarly journals Optimum Resilient Operation and Control DC Microgrid Based Electric Vehicles Charging Station Powered by Renewable Energy Sources

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4240 ◽  
Author(s):  
Khairy Sayed ◽  
Ahmed G. Abo-Khalil ◽  
Ali S. Alghamdi
Keyword(s):  
Renewable Energy ◽  
Energy Management ◽  
Electric Vehicles ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Solar Pv ◽  
Dc Microgrid ◽  
Charging Station ◽  
And Control ◽  
Ev Charging

This paper introduces an energy management and control method for DC microgrid supplying electric vehicles (EV) charging station. An Energy Management System (EMS) is developed to manage and control power flow from renewable energy sources to EVs through DC microgrid. An integrated approach for controlling DC microgrid based charging station powered by intermittent renewable energies. A wind turbine (WT) and solar photovoltaic (PV) arrays are integrated into the studied DC microgrid to replace energy from fossil fuel and decrease pollution from carbon emissions. Due to the intermittency of solar and wind generation, the output powers of PV and WT are not guaranteed. For this reason, the capacities of WT, solar PV panels, and the battery system are considered decision parameters to be optimized. The optimized design of the renewable energy system is done to ensure sufficient electricity supply to the EV charging station. Moreover, various renewable energy technologies for supplying EV charging stations to improve their performance are investigated. To evaluate the performance of the used control strategies, simulation is carried out in MATLAB/SIMULINK.

Operation and control of a stand-alone power system with integrated multiple renewable energy sources

2021 ◽  
pp. 0309524X2110241
Author(s):  
Nindra Sekhar ◽  
Natarajan Kumaresan
Keyword(s):  
Renewable Energy ◽  
Reactive Power ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Solar Pv ◽  
Power Requirement ◽  
Squirrel Cage ◽  
Hysteresis Controller ◽  
Squirrel Cage Induction Generator ◽  
And Control

To overcome the difficulties of extending the main power grid to isolated locations, this paper proposes the local installation of a combination of three renewable energy sources, namely, a wind driven DFIG, a solar PV unit, a biogas driven squirrel-cage induction generator (SCIG), and an energy storage battery system. In this configuration one bi-directional SPWM inverter at the rotor side of the DFIG controls the voltage and frequency, to maintain them constant on its stator side, which feeds the load. The PV-battery also supplies the load, through another inverter and a hysteresis controller. Appropriately adding a capacitor bank and a DSTATCOM has also been considered, to share the reactive power requirement of the system. Performance of various modes of operation of this coordinated scheme has been studied through simulation. All the results and relevant waveforms are presented and discussed to validate the successful working of the proposed system.

scholarly journals Integration and control of lithium-ion BESSs for active network management in smart grids: Sundom smart grid backup feeding case

2021 ◽  
Author(s):  
Chethan Parthasarathy ◽  
Hossein Hafezi ◽  
Hannu Laaksonen
Keyword(s):  
Smart Grid ◽  
Network Management ◽  
Smart Grids ◽  
Reactive Power ◽  
Renewable Energy Sources ◽  
Lithium Ion ◽  
Active Network ◽  
Li Ion ◽  
Grid Side ◽  
And Control

AbstractLithium-ion battery energy storage systems (Li-ion BESS), due to their capability in providing both active and reactive power services, act as a bridging technology for efficient implementation of active network management (ANM) schemes for land-based grid applications. Due to higher integration of intermittent renewable energy sources in the distribution system, transient instability may induce power quality issues, mainly in terms of voltage fluctuations. In such situations, ANM schemes in the power network are a possible solution to maintain operation limits defined by grid codes. However, to implement ANM schemes effectively, integration and control of highly flexible Li-ion BESS play an important role, considering their performance characteristics and economics. Hence, in this paper, an energy management system (EMS) has been developed for implementing the ANM scheme, particularly focusing on the integration design of Li-ion BESS and the controllers managing them. Developed ANM scheme has been utilized to mitigate MV network issues (i.e. voltage stability and adherence to reactive power window). The efficiency of Li-ion BESS integration methodology, performance of the EMS controllers to implement ANM scheme and the effect of such ANM schemes on integration of Li-ion BESS, i.e. control of its grid-side converter (considering operation states and characteristics of the Li-ion BESS) and their coordination with the grid side controllers have been validated by means of simulation studies in the Sundom smart grid network, Vaasa, Finland.

scholarly journals QoE-Aware Smart Home Energy Management Considering Renewables and Electric Vehicles

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2304 ◽  
Author(s):  
Mingfu Li ◽  
Guan-Yi Li ◽  
Hou-Ren Chen ◽  
Cheng-Wei Jiang
Keyword(s):  
Energy Management ◽  
Electric Vehicles ◽  
Smart Home ◽  
Control Algorithm ◽  
Renewable Energy Sources ◽  
Peak Load ◽  
Electricity Bill ◽  
Home Energy Management ◽  
Smart Appliance ◽  
User Comfort

To reduce the peak load and electricity bill while preserving the user comfort, a quality of experience (QoE)-aware smart appliance control algorithm for the smart home energy management system (sHEMS) with renewable energy sources (RES) and electric vehicles (EV) was proposed. The proposed algorithm decreases the peak load and electricity bill by deferring starting times of delay-tolerant appliances from peak to off-peak hours, controlling the temperature setting of heating, ventilation, and air conditioning (HVAC), and properly scheduling the discharging and charging periods of an EV. In this paper, the user comfort is evaluated by means of QoE functions. To preserve the user’s QoE, the delay of the starting time of a home appliance and the temperature setting of HVAC are constrained by a QoE threshold. Additionally, to solve the trade-off problem between the peak load/electricity bill reduction and user’s QoE, a fuzzy logic controller for dynamically adjusting the QoE threshold to optimize the user’s QoE was also designed. Simulation results demonstrate that the proposed smart appliance control algorithm with a fuzzy-controlled QoE threshold significantly reduces the peak load and electricity bill while optimally preserving the user’s QoE. Compared with the baseline case, the proposed scheme reduces the electricity bill by 65% under the scenario with RES and EV. Additionally, compared with the method of optimal scheduling of appliances in the literature, the proposed scheme achieves much better peak load reduction performance and user’s QoE.

Control Strategy of the Hybrid Energy Storage System for Leveling Off Fluctuating Power Output of Stand-Alone Photovoltaic System

2013 ◽  
Vol 860-863 ◽  
pp. 608-612
Author(s):  
Hai Bo Wang ◽  
Xiu Yang ◽  
Jun Liu ◽  
Jie Chen
Keyword(s):  
Energy Management ◽  
Control Strategy ◽  
Storage System ◽  
Energy Storage System ◽  
Photovoltaic System ◽  
Super Capacitor ◽  
Hybrid Energy ◽  
Hybrid Energy Storage ◽  
Hybrid Energy Storage System ◽  
And Control

Hybrid energy storage system (HESS) including battery and super-capacitor can take advantages of both high energy density and high power density. In the stand-alone PV micro-grid, in which two buck/boost bidirectional converters are connected to the DC bus directly, a novel energy management scheme is proposed. After filtering the fluctuating power of the HESS, charge and discharge currents of the battery are controlled by hysteresis control method, the super-capacitor supplies the difference of the power. To leveling off the fluctuating power output of photovoltaic system and control the voltage of the DC bus, a new control strategy applied to the bidirectional converter of the super capacitor is put forward. The feed-forward loops of input voltage, load current and output voltage are introduced to improve the response speed and stability of the system. Results of the simulation show the effectiveness of the proposed energy management and control strategy.

Study and Investigation of Energy Management Techniques Used in Electric/Hybrid Electric Vehicles

2021 ◽  
Vol 54 (4) ◽  
pp. 599-606
Author(s):  
Punyavathi Ramineni ◽  
Alagappan Pandian
Keyword(s):  
Energy Management ◽  
Electric Vehicles ◽  
Internal Combustion Engines ◽  
Hybrid Electric Vehicles ◽  
Vital Role ◽  
Combustion Engines ◽  
Key Factor ◽  
Hybrid Electric ◽  
And Control ◽  
Intelligent Controllers

Many pollution-related issues are raising due to the usage of conventional internal combustion engines (ICEs) vehicles. Electric Vehicles/ Hybrid electric vehicles (EVs/HEVs) are the finest solutions to overcome those problems associated with ICE-based vehicles. The EVs are introduced with a signal energy source (SES), which is not a successful attempt, especially during transient vehicles, driving, etc. Multiple energy sources (MES) EVs are introduced to attain better performance than the SES vehicles, which is obtained by combining two sources like battery/fuel cells, ultracapacitor. In this contest, energy management (EMNG) plays a vital role in sharing the load to the sources as per the EVs requirement. In the case of MES-based EVs, the controller always plays a significant role in the related EMNG system because it is the key factor in improving vehicle efficiency. In this article, a study has mainly been done related to several conventional, intelligent controllers and control algorithms to do the proper EMNG between sources present in the EV.

IoE-Based Control and Monitoring of Electrical Grids

2019 ◽  
pp. 57-82 ◽  
Author(s):  
Nelson Pinto ◽  
Dario Cruz ◽  
Jânio Monteiro ◽  
Cristiano Cabrita ◽  
Jorge Semião ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Management ◽  
Renewable Energy Sources ◽  
Monitoring And Control ◽  
Monitoring And Control System ◽  
Energy Management Systems ◽  
Management Measures ◽  
Electrical Grids ◽  
And Control ◽  
Levels Of Integration

In many countries, renewable energy production already represents an important percentage of the total energy that is generated in electrical grids. In order to reach higher levels of integration, demand side management measures are yet required. In fact, different from the legacy electrical grids, where at any given instant the generation levels are adjusted to meet the demand, when using renewable energy sources, the demand must be adapted in accordance with the generation levels, since these cannot be controlled. In order to alleviate users from the burden of individual control of each appliance, energy management systems (EMSs) have to be developed to both monitor the generation and consumption patterns and to control electrical appliances. In this context, the main contribution of this chapter is to present the implementation of such an IoT-based monitoring and control system for microgrids, capable of supporting the development of an EMS.

Sign in / Sign up

Export Citation Format

Share Document