scholarly journals Digital Twin for Operation of Microgrid: Optimal Scheduling in Virtual Space of Digital Twin

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5504
Author(s):  
Hyang-A Park ◽  
Gilsung Byeon ◽  
Wanbin Son ◽  
Hyung-Chul Jo ◽  
Jongyul Kim ◽  
...  
Keyword(s):  
Real Time ◽  
Industrial Revolution ◽  
Storage System ◽  
Research Field ◽  
Optimization Techniques ◽  
Virtual Space ◽  
Machine Learning Techniques ◽  
Time Data ◽  
Digital Twin ◽  
Learning Techniques

Due to the recent development of information and communication technology (ICT), various studies using real-time data are now being conducted. The microgrid research field is also evolving to enable intelligent operation of energy management through digitalization. Problems occur when operating the actual microgrid, causing issues such as difficulty in decision making and system abnormalities. Using digital twin technology, which is one of the technologies representing the fourth industrial revolution, it is possible to overcome these problems by changing the microgrid configuration and operating algorithms of virtual space in various ways and testing them in real time. In this study, we proposed an energy storage system (ESS) operation scheduling model to be applied to virtual space when constructing a microgrid using digital twin technology. An ESS optimal charging/discharging scheduling was established to minimize electricity bills and was implemented using supervised learning techniques such as the decision tree, NARX, and MARS models instead of existing optimization techniques. NARX and decision trees are machine learning techniques. MARS is a nonparametric regression model, and its application has been increasing. Its performance was analyzed by deriving performance evaluation indicators for each model. Using the proposed model, it was found in a case study that the amount of electricity bill savings when operating the ESS is greater than that incurred in the actual ESS operation. The suitability of the model was evaluated by a comparative analysis with the optimization-based ESS charging/discharging scheduling pattern.

Research on Assembly Process Simulation of Construction Machinery Arm Based on Digital Twin

2021 ◽  
Vol 10 (1) ◽  
pp. 52
Author(s):  
Yunxi Zhang ◽  
Gangfeng Wang ◽  
Dong Zhang ◽  
Qi Zhang
Keyword(s):  
Real Time ◽  
Measurement Data ◽  
Physical Space ◽  
Feedback Mechanism ◽  
Virtual Space ◽  
Assembly Process ◽  
Time Data ◽  
Construction Machinery ◽  
Digital Twin ◽  
Assembly Simulation

The construction machinery arm is the key component of construction machinery to complete the operation task; its assembly link directly affects the product quality and operational performance of the whole machinery. To solve the problems of low assembly efficiency and the inability to fully reflect the assembly process indexes and product characteristics in the traditional construction machinery arm assembly, this paper studies assembly process modeling and simulation for the construction machinery arm based on assembly sensing data and digital twin. By extracting and processing the assembly resource data and field measurement data of the machinery arm, the assembly process information database under the digital twin environment is constructed, which lays the foundation for the virtual assembly model construction of the machinery arm. Through the real-time data interaction between virtual space and physical space, a complete assembly of digital twin spaces is formed. Finally, taking the assembly line of an excavator armed as an example, it is shown that the digital twin-based assembly simulation can monitor the assembly process in real-time and optimize its configuration to improve assembly efficiency. Therefore, an effective closed-loop feedback mechanism is constructed for the whole assembly process of the construction machinery arm.

scholarly journals Forecasting with Machine Learning Techniques

Forecasting ◽  
2021 ◽  
Vol 3 (4) ◽  
pp. 868-869
Author(s):  
Walayat Hussain ◽  
Asma Musabah Alkalbani ◽  
Honghao Gao
Keyword(s):  
Machine Learning ◽  
Real Time ◽  
Decision Maker ◽  
Machine Learning Techniques ◽  
Time Data ◽  
Learning Techniques ◽  
Real Time Data

The decision-maker is increasingly utilising machine learning (ML) techniques to find patterns in huge quantities of real-time data [...]

scholarly journals Near real-time air quality forecasts using the NASA GEOS model

2021 ◽  
Author(s):  
K. Emma Knowland ◽  
Christoph Keller ◽  
Krzysztof Wargan ◽  
Brad Weir ◽  
Pamela Wales ◽  
...  
Keyword(s):  
Machine Learning ◽  
Air Quality ◽  
Real Time ◽  
Weather Forecasting ◽  
Atmospheric Composition ◽  
Machine Learning Techniques ◽  
Learning Techniques ◽  
Wide Range ◽  
Reactive Trace Gases ◽  
Assimilation System

<p>NASA's Global Modeling and Assimilation Office (GMAO) produces high-resolution global forecasts for weather, aerosols, and air quality. The NASA Global Earth Observing System (GEOS) model has been expanded to provide global near-real-time 5-day forecasts of atmospheric composition at unprecedented horizontal resolution of 0.25 degrees (~25 km). This composition forecast system (GEOS-CF) combines the operational GEOS weather forecasting model with the state-of-the-science GEOS-Chem chemistry module (version 12) to provide detailed analysis of a wide range of air pollutants such as ozone, carbon monoxide, nitrogen oxides, and fine particulate matter (PM2.5). Satellite observations are assimilated into the system for improved representation of weather and smoke. The assimilation system is being expanded to include chemically reactive trace gases. We discuss current capabilities of the GEOS Constituent Data Assimilation System (CoDAS) to improve atmospheric composition modeling and possible future directions, notably incorporating new observations (TROPOMI, geostationary satellites) and machine learning techniques. We show how machine learning techniques can be used to correct for sub-grid-scale variability, which further improves model estimates at a given observation site.</p>

scholarly journals Using Digital Twining in Fast-food Production Chain Simulation

2021 ◽  
Vol 343 ◽  
pp. 03005
Author(s):  
Florina Chiscop ◽  
Bogdan Necula ◽  
Carmen Cristiana Cazacu ◽  
Cristian Eugen Stoica
Keyword(s):  
Real Time ◽  
Fast Food ◽  
Virtual Model ◽  
Time Data ◽  
Production Chain ◽  
The Real ◽  
Time Dynamic ◽  
Digital Twin ◽  
Food Company ◽  
The Moment

The topic of this paper represents our research in the process of creating a virtual model (digital twin) for a fast-food company production chain starting with the moment when a customer launches an order, following with the processing of that order, until the customer receives it. The model will describe elements that are included in this process such as equipment, human resources and the necessary space that is needed to host this layout. The virtual model created in a simulation platform will be a replicate of a real fast-food company, thus helping us observe the real time dynamic of this production system. Using WITNESS HORIZON 23 we will construct the model of the layout based on real time data received from the fast-food company. This digital twin will be used to manage the production chain material flow, evaluating the performance of the system architecture in various scenarios. In order to obtain a diagnosis of the system’s performance we will simulate the workflow running through preliminary architecture in compliance with the real time behaviour to identify the bottlenecks and blockages in the flow trajectory. In the end we will propose two different optimised architectures for the fast-food company production chain.

scholarly journals Intelligent Machine Learning: Tailor-Making Macromolecules

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 579 ◽  
Author(s):  
Yousef Mohammadi ◽  
Mohammad Saeb ◽  
Alexander Penlidis ◽  
Esmaiel Jabbari ◽  
Florian J. Stadler ◽  
...  
Keyword(s):  
Machine Learning ◽  
Kinetic Monte Carlo ◽  
Engineering Problem ◽  
Optimization Techniques ◽  
Machine Learning Techniques ◽  
Coordination Polymerization ◽  
Intelligent Modeling ◽  
Learning Techniques ◽  
Input Variables ◽  
Architectural Characteristics

Nowadays, polymer reaction engineers seek robust and effective tools to synthesize complex macromolecules with well-defined and desirable microstructural and architectural characteristics. Over the past few decades, several promising approaches, such as controlled living (co)polymerization systems and chain-shuttling reactions have been proposed and widely applied to synthesize rather complex macromolecules with controlled monomer sequences. Despite the unique potential of the newly developed techniques, tailor-making the microstructure of macromolecules by suggesting the most appropriate polymerization recipe still remains a very challenging task. In the current work, two versatile and powerful tools capable of effectively addressing the aforementioned questions have been proposed and successfully put into practice. The two tools are established through the amalgamation of the Kinetic Monte Carlo simulation approach and machine learning techniques. The former, an intelligent modeling tool, is able to model and visualize the intricate inter-relationships of polymerization recipes/conditions (as input variables) and microstructural features of the produced macromolecules (as responses). The latter is capable of precisely predicting optimal copolymerization conditions to simultaneously satisfy all predefined microstructural features. The effectiveness of the proposed intelligent modeling and optimization techniques for solving this extremely important ‘inverse’ engineering problem was successfully examined by investigating the possibility of tailor-making the microstructure of Olefin Block Copolymers via chain-shuttling coordination polymerization.

Real-time data acquisition and storage system

1993 ◽  
Author(s):  
Fabrizio Barone ◽  
Luciano DiFiore ◽  
Leopoldo Milano ◽  
G. Russo
Keyword(s):  
Data Acquisition ◽  
Real Time ◽  
Storage System ◽  
Time Data ◽  
Real Time Data ◽  
And Storage

scholarly journals Construction worker productivity in hot and humid weather conditions

2019 ◽  
Vol 27 (1) ◽  
pp. 83-108
Author(s):  
Ammar Saeed Mohammed Moohialdin ◽  
Fiona Lamari ◽  
Marc Miska ◽  
Bambang Trigunarsyah
Keyword(s):  
Real Time ◽  
Construction Industry ◽  
Productivity Loss ◽  
Weather Conditions ◽  
Research Field ◽  
Future Research ◽  
Time Data ◽  
Worker Productivity ◽  
Content Type ◽  
The Impact

Purpose The purpose of this paper shows the effect of hot and humid weather conditions (HHWCs) on workers that has resulted in considerable loss in the construction industry, especially during the hottest periods due to decline in worker productivity (WP). Until the last few decades, there is very limited research on construction WP in HHWCs. Nevertheless, these studies have sparked interests on seeking for the most appropriate methods to assess the impact of HHWCs on construction workers. Design/methodology/approach This paper begins by reviewing the current measuring methods on WP in HHWCs, follows by presenting the potential impact of HHWCs on WP. The paper highlights the methodological deficiencies, which consequently provides a platform for scholars and practitioners to direct future research to resolve the significant productivity loss due to global warming. This paper highlights the need to identify the limitations and advantages of the current methods to formulate a framework of new approaches to measure the WP in HHWCs. Findings Results show that the methods used in providing real-time response on the effects of HHWCs on WP in construction at project, task and crew levels are limited. An integration of nonintrusive real-time monitoring system and local weather measurement with real-time data synchronisation and analysis is required to produce suitable information to determine worker health- and safety-related decisions in HHWCs. Originality/value The comprehensive literature review makes an original contribution to WP measurements filed in HHWCs in the construction industry. Results of this review provide researchers and practitioners with an insight into challenges associated with the measurements methods and solving practical site measurements issues. The findings will also enable the researchers and practitioners to bridge the identified research gaps in this research field and enhance the ability to provide accurate measures in HHWCs. The proposed research framework may promote potential improvements in the productivity measurements methods, which support researchers and practitioners in developing new innovative methods in HHWCs with the integration of the most recent monitoring technologies.

A Digital Twin Concept for Manufacturing Systems

2018 ◽  
Author(s):  
Wesley Ellgass ◽  
Nathan Holt ◽  
Hector Saldana-Lemus ◽  
Julian Richmond ◽  
Ali Vatankhah Barenji ◽  
...  
Keyword(s):  
Virtual Reality ◽  
Real Time ◽  
Manufacturing Systems ◽  
Manufacturing System ◽  
Virtual Space ◽  
Smart Manufacturing ◽  
Shop Floor ◽  
Digital Twin ◽  
Physical Resources ◽  
Virtual Resources

With the developments and applications of the advanced information technologies such as cloud computing, internet of thing, artificial intelligence and virtual reality, industry 4.0 and smart manufacturing era are coming. In this respect, one of the specific challenges is to achieve a connection of physical resources on the shop floor with virtual resources, for real-time response, real time process optimization, and simulation, which is merged by big data problem. In this respect, Digital Twins (DT) concept is introduced as a key technology, which includes physical resources, virtual resources, service system, and digital twin data. DT considers current condition of physical resource and prediction of future events to make a responsive decision. However, due to the complexity of building a digital equivalent in virtual space to its physical counterpart, very little applications have been developed with this purpose, especially in the industrial manufacturing area. Therefore, the types of data and technology required to build the DT for a manufacturing system are presented in this work, trying to develop a framework of DT based manufacturing system, which is supported by the virtual reality for virtualization of physical resources.

Sign in / Sign up

Export Citation Format

Share Document