scholarly journals Recent Development in the Design of Wind Deflectors for Vertical Axis Wind Turbine: A Review

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5140
Author(s):  
Altaf Hussain Rajpar ◽  
Imran Ali ◽  
Ahmad E. Eladwi ◽  
Mohamed Bashir Ali Bashir
Keyword(s):  
Wind Turbines ◽  
Vertical Axis ◽  
Optimization Techniques ◽  
Rotor Blades ◽  
Power Coefficient ◽  
Potential Contribution ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Network Costs

Developments in the design of wind turbines with augmentation are advancing around the globe with the goal of generating electricity close to the user in built-up areas. This is certain to help lessen the power generation load as well as distribution and transmission network costs by reducing the distance between the user and the power source. The main objectives driving the development and advancement of vertical-axis wind turbines are increasing the power coefficient and the torque coefficient by optimizing the upstream wind striking on the rotor blades. Unlike horizontal-axis wind turbines, vertical axis turbines generate not only positive torque but also negative torque during operation. The negative torque generated by the returning blade is a key issue for vertical-axis wind turbines (VAWTs) that is counterproductive. Installation of wind deflectors for flow augmentation helps to reduce the negative torque generated by the returning blades as well as enhance the positive torque by creating a diversion in the upstream wind towards the forwarding blade during operation. This paper reviews various designs, experiments, and CFD simulations of wind deflectors reported to date. Optimization techniques for VAWTs incorporating wind deflectors are discussed in detail. The main focus of the review was on the installation position and orientation of the deflectors and their potential contribution to increasing the power coefficient. Topics for future study are suggested in the conclusion section of the paper.

Vertical axis wind turbine operation in icing conditions: A review study

2021 ◽  
pp. 0309524X2110618
Author(s):  
Syed Abdur Rahman Tahir ◽  
Muhammad Shakeel Virk
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Electricity Production ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Promising Solution ◽  
Review Study ◽  
Accretion Physics

Vertical Axis Wind Turbine (VAWT) can be a promising solution for electricity production in remote ice prone territories of high north, where good wind resources are available, but icing is a challenge that can affect its optimum operation. A lot of research has been made to study the icing effects on the conventional horizontal axis wind turbines, but the literature about vertical axis wind turbines operating in icing conditions is still scarce, despite the importance of this topic. This paper presents a review study about existing knowledge of VAWT operation in icing condition. Focus has been made in better understanding of ice accretion physics along VAWT blades and methods to detect and mitigate icing effects.

scholarly journals An experimental study of the optimal design parameters of a wind power tower used to improve the performance of vertical axis wind turbines

2018 ◽  
Vol 10 (9) ◽  
pp. 168781401879954
Author(s):  
Soo-Yong Cho ◽  
Sang-Kyu Choi ◽  
Jin-Gyun Kim ◽  
Chong-Hyun Cho
Keyword(s):  
Experimental Study ◽  
Optimal Design ◽  
Wind Turbine ◽  
Wind Power ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Design Parameters ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines

In order to augment the performance of vertical axis wind turbines, wind power towers have been used because they increase the frontal area. Typically, the wind power tower is installed as a circular column around a vertical axis wind turbine because the vertical axis wind turbine should be operated in an omnidirectional wind. As a result, the performance of the vertical axis wind turbine depends on the design parameters of the wind power tower. An experimental study was conducted in a wind tunnel to investigate the optimal design parameters of the wind power tower. Three different sizes of guide walls were applied to test with various wind power tower design parameters. The tested vertical axis wind turbine consisted of three blades of the NACA0018 profile and its solidity was 0.5. In order to simulate the operation in omnidirectional winds, the wind power tower was fabricated to be rotated. The performance of the vertical axis wind turbine was severely varied depending on the azimuthal location of the wind power tower. Comparison of the performance of the vertical axis wind turbine was performed based on the power coefficient obtained by averaging for the one periodic azimuth angle. The optimal design parameters were estimated using the results obtained under equal experimental conditions. When the non-dimensional inner gap was 0.3, the performance of the vertical axis wind turbine was better than any other gaps.

The Straight-Bladed Morphing Vertical Axis Wind Turbine

2016 ◽  
Author(s):  
David MacPhee ◽  
Asfaw Beyene
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Low Cost ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Pitch Control ◽  
Control Schemes ◽  
Horizontal Axis Wind Turbines ◽  
Novel Concept

Blade pitch control has been extremely important for the development of Horizontal-Axis Wind Turbines (HAWTs), allowing for greater efficiency over a wider range of operational regimes when compared to rigid-bladed designs. For Vertical-Axis Wind Turbines (VAWTs), blade pitching is inherently more difficult due to a dependence of attack angle on turbine armature location, shaft speed, and wind speed. As a result, there have been very few practical pitch control schemes put forward for VAWTs, which may be a major reason why this wind turbine type enjoys a much lower market share as compared to HAWTs. To alleviate this issue, the flexible, straight-bladed vertical-axis turbine is presented, which can passively adapt its geometry to local aerodynamic loadings and serves as a low-cost blade pitch control strategy increasing efficiency and startup capabilities. Using two-dimensional fluid-structure action simulations, this novel concept is compared to an identical rigid one and is proven to be superior in terms of power coefficient due to decreased torque minima. Moreover, due to the flexible nature of the blades, the morphing turbine achieves less severe oscillatory loadings. As a result, the morphing blade design is expected to not only increase efficiency but also system longevity without additional system costs usually associated with active pitch control schemes.

scholarly journals Design and Performance Evaluation of Low-Speed Vertical Axis Wind Turbines with Wind Boosters using CFD Analysis

2021 ◽  
pp. 34-45
Author(s):  
Sardar Karanjeet Singh ◽  
Shravan Vishwakarma
Keyword(s):  
Wind Turbines ◽  
Mechanical Energy ◽  
Vertical Axis ◽  
Rotor Blades ◽  
Coefficient Of Performance ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Cad Modelling ◽  
Mechanical Durability ◽  
And Performance

The use of wind based energy is quickly expanding over the planet. The goal of this study is to use computational methods of fluid dynamics to develop a novel model of VAWT including Windbooster for various rotor blades like two, three, and four blades in order to enhance effectiveness. CAD modelling approaches of vertical axis wind turbines including and excluding booster are created. Including all vertical axis wind turbine blade designs including and excluding booster, torque, power, and Coefficient of performance are compared.The performance of three blades on the basis of mechanical properties includingi wind amplifier is 29.9% greater than two blades using wind amplifier, and four blades using wind amplifier is 21.5 percent greater than three blades using wind amplifier, according to the findings. Because the mechanical energy created by a four-blade wind booster wasn't as great as it is including three blades, VAWT employing three-blade wind booster seems to be more effective than VAWT with a two- or four-blade wind booster. For improved mechanical durability, VAWT with three-blade wind amplifier is recommended.

Experimental Investigation of Overlap and Blockage Effects on Three-Bucket Savonius Rotors

2007 ◽  
Vol 31 (5) ◽  
pp. 363-368 ◽  
Author(s):  
A. Biswas ◽  
R. Gupta ◽  
K.K. Sharma
Keyword(s):  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Experimental Investigations ◽  
Small Scale ◽  
Correction Factors ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Blockage Correction ◽  
Model Rotor

Savonius vertical axis wind turbines (VAWT) have advantages over horizontal axis wind turbines (HAWT), such as simple construction, acceptance of wind from any direction without orientation, self-starting, inexpensive etc. These advantages make it a viable proposition for small-scale applications in developing countries. In spite of the above advantages, VAWT are not gaining popularity mainly because of their poor efficiency. Hence, a three-bucket Savonius model rotor, having 8 cm bucket diameter and 20 cm height, was designed, fabricated, and tested in a sub-sonic wind tunnel. Provisions for variations of ‘blade’ overlap were included. Experiments were conducted for overlap conditions in the range of 16% to 35%. From the experimental investigations, power-coefficients (Cp) were calculated with and without blockage correction factors for tunnel interference. In both analyses, the power-coefficient increased if there was overlap, with an optimum value at 20% overlap of 47% without blockage correction, and 38% with blockage correction.

scholarly journals Double-Multiple Streamtube Analysis of a Flexible Vertical Axis Wind Turbine

Fluids ◽  
2021 ◽  
Vol 6 (3) ◽  
pp. 118
Author(s):  
Lalit Roy ◽  
Kellis Kincaid ◽  
Roohany Mahmud ◽  
David W. MacPhee
Keyword(s):  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Lower Efficiency ◽  
Major Disadvantage ◽  
Horizontal Axis Wind Turbines ◽  
Operational Range ◽  
Naca 0012

Vertical-axis wind turbines (VAWTs) have drawn increased attention for off-grid and off-shore power generation due to inherent advantages over the more popular horizontal-axis wind turbines (HAWTs). Among these advantages are generator locale, omni-directionality and simplistic design. However, one major disadvantage is lower efficiency, which can be alleviated through blade pitching. Since each blade must transit both up- and down-stream each revolution, VAWT blade pitching techniques are not yet commonplace due to increased complexity and cost. Utilizing passively-morphing flexible blades can offer similar results as active pitching, requiring no sensors or actuators, and has shown promise in increasing VAWT performance in select cases. In this study, wind tunnel tests have been conducted with flexible and rigid-bladed NACA 0012 airfoils, in order to provide necessary input data for a Double-Multiple Stream-Tube (DMST) model. The results from this study indicate that a passively-morphing VAWT can achieve a maximum power coefficient (Cp) far exceeding that for a rigid-bladed VAWT CP (18.9% vs. 10%) with reduced normal force fluctuations as much as 6.9%. Operational range of tip-speed ratio also is observed to increase by a maximum of 40.3%.

Wind Power Output Performance Horizontal and Vertical Axis Wind Turbines for Isolated Small Applications in Saudi Arabia

2014 ◽  
Author(s):  
Luai M. Al-Hadhrami ◽  
Shafiqur Rehman
Keyword(s):  
Wind Turbines ◽  
Vertical Axis ◽  
Horizontal Axis ◽  
Energy Output ◽  
Energy Yield ◽  
Vertical Axis Wind Turbine ◽  
Average Wind Speed ◽  
Maximum Increase ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines

The study evaluated the energy output and plant capacity factor of small wind turbines in the category of 3–10 kW rated power. The effects of hub height on energy output and the PCF have been studied. To achieve the set objectives, hourly average wind speed data measured at 10, 20, 30, and 40 meter and wind direction at 30 and 40 meter above ground level during July 01, 2006 to July 10, 2008 has been utilized. The highest percentage change in annual energy yield (AEY) was obtained for an increase in hub height from 20 to 30 m for both horizontal and vertical wind turbines used in this study. Horizontal axis wind turbines HAWT-1, HAWT-2, and HAWT-6; and vertical axis wind turbines VAWT-1, VAWT-2, and VAWT-4 are recommended for various ranges of loads. Horizontal axis wind turbines were found generally more efficient than the vertical axis wind turbine in the present case. In general, all the turbines showed a maximum increase in energy yield for an increase of 10 m in hub height from 20 to 30m and the annual mean energy yield usually followed the load pattern in the study area. Lastly, the mean turbulence intensity was always less than the value recommended in IEC64100-1 standard.

Modeling and Numerical Simulation for the Newly Designed Four Cavity Blades Vertical Axis Wind Turbine

2014 ◽  
Vol 554 ◽  
pp. 536-540
Author(s):  
Kadhim Suffer ◽  
Ryspek Usubamatov ◽  
Ghulam Abdul Quadir ◽  
Khairul Azwan Ismail
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Urban Areas ◽  
Fluid Dynamic ◽  
Turbulence Models ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
The Individual

The last years have proved that Vertical Axis Wind Turbines (VAWTs) are more suitable for urban areas than Horizontal Axis Wind Turbines (HAWTs). To date, very little has been published in this area to assess good performance and lifetime of VAWTs either in open or urban areas. The main goal of this current research is to investigate numerically the aerodynamic performance of a newly designed cavity type vertical axis wind turbine having four blades. In the current new design the power generated depends on the drag force generated by the individual blades and interactions between them in a rotating configuration. For numerical investigation, commercially available computational fluid dynamic CFD software GAMBIT and FLUENT were used. In this numerical analysis the Shear Stress Transport (SST) k-ω turbulence model is used which is better than the other turbulence models available as suggested by some researchers. The computed results show good agreement with published experimental results.

Performance Analysis of Savonius-Style Wind Turbines Under Concentrated and Oriented Jets

2014 ◽  
Author(s):  
Sukanta Roy ◽  
Ujjwal K. Saha
Keyword(s):  
Wind Turbines ◽  
Rural Areas ◽  
Vertical Axis ◽  
Energy System ◽  
Power Coefficient ◽  
Small Scale ◽  
Vertical Axis Wind Turbine ◽  
Concave Part ◽  
Open Test ◽  
Horizontal Axis Wind Turbines

With the rapid growth of renewable energy sector, vertical axis wind turbines are finding their applications in the small-scale distributed wind energy system, particularly in rural areas. These turbines are simple in construction and easy to install with comparatively lower cost. However, the efficiency of these turbines is not competitive to that of horizontal axis wind turbines. In this paper, an attempt has been made to improve the efficiency of a Savonius-style vertical axis wind turbine under concentrated and oriented jets through installation of deflectors at different positions ahead of the turbine. The aim is to make the major portion of the flow to be incident on the concave part of the blades. Experiments are conducted in a low speed wind tunnel with an open test section facility. For all the experiments, the wind speed in the tunnel is kept constant at 6.2 m/s. The mechanical loads are varied to analyze the performance of the turbine at various tip speed ratios. In each case, both power and torque coefficients are calculated in order to estimate the performance indices of the turbine. Moreover, a suitable operating range of this turbine is specified. The present investigation demonstrates that with the installation of deflectors, the performance of the Savonius-style wind turbines can be sufficiently improved under concentrated and oriented jets. The peak power coefficient of 0.32 is achieved with an optimized position of the deflectors in front of both the advancing and returning blades.

Optimal Placement of Horizontal- and Vertical-Axis Wind Turbines in a Wind Farm for Maximum Power Generation Using a Genetic Algorithm

2011 ◽  
Author(s):  
Xiaomin Chen ◽  
Ramesh Agarwal
Keyword(s):  
Genetic Algorithm ◽  
Wind Turbines ◽  
Wind Farm ◽  
Optimization Problem ◽  
Vertical Axis ◽  
Optimal Placement ◽  
Vertical Axis Wind Turbines ◽  
Wake Effects ◽  
Horizontal Axis Wind Turbines ◽  
Wake Model

In this paper, we consider the Wind Farm layout optimization problem using a genetic algorithm. Both the Horizontal–Axis Wind Turbines (HAWT) and Vertical-Axis Wind Turbines (VAWT) are considered. The goal of the optimization problem is to optimally place the turbines within the wind farm such that the wake effects are minimized and the power production is maximized. The reasonably accurate modeling of the turbine wake is critical in determination of the optimal layout of the turbines and the power generated. For HAWT, two wake models are considered; both are found to give similar answers. For VAWT, a very simple wake model is employed.

Sign in / Sign up

Export Citation Format

Share Document