scholarly journals Performance and Exhaust Emissions of a Spark Ignition Internal Combustion Engine Fed with Butanol–Glycerol Blend

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6473
Author(s):  
Stanislaw Szwaja ◽  
Michal Gruca ◽  
Michal Pyrc ◽  
Romualdas Juknelevičius
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Engine Performance ◽  
Internal Combustion ◽  
Exhaust Emissions ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
Exhaust Temperature ◽  
Indicated Mean Effective Pressure

Investigation of a new type of fuel for the internal combustion engine, which can be successfully used in both the power generation and the automotive industries, is presented in this article. The proposed fuel is a blend of 75% n-butanol and 25% glycerol. The engine tests conducted with this glycerol–butanol blend were focused on the performance, combustion thermodynamics, and exhaust emissions of a spark-ignition engine. A comparative analysis was performed to find potential similarities and differences in the engine fueled with gasoline 95 and the proposed glycerol–butanol blend. As measured, CO exhaust emissions increased, NOx emissions decreased, and UHC emissions were unchanged for the glycerol–butanol blend when compared to the test with sole gasoline. As regards the engine performance and combustion progress, no significant differences were observed. Exhaust temperature remarkably decreased by 3.4%, which contributed to an increase in the indicated mean effective pressure by approximately 4% compared to gasoline 95. To summarize, the proposed glycerol–butanol blend can be directly used as a replacement for gasoline in internal combustion spark-ignition engines.

scholarly journals Impact of Pyrolysis Oil Addition to Ethanol on Combustion in the Internal Combustion Spark Ignition Engine

2021 ◽  
Vol 3 (2) ◽  
pp. 450-461
Author(s):  
Magdalena Szwaja ◽  
Mariusz Chwist ◽  
Stanislaw Szwaja ◽  
Romualdas Juknelevičius
Keyword(s):  
Combustion Process ◽  
Engine Performance ◽  
Calorific Value ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
Pyrolysis Oil ◽  
Indicated Mean Effective Pressure ◽  
Spark Timing

Thermal processing (torrefaction, pyrolysis, and gasification), as a technology can provide environmentally friendly use of plastic waste. However, it faces a problem with respect to its by-products. Pyrolysis oil obtained using this technology is seen as a substance that is extremely harmful for living creatures and that needs to be neutralized. Due to its relatively high calorific value, it can be considered as a potential fuel for internal combustion spark-ignition engines. In order make the combustion process effective, pyrolysis oil is blended with ethanol, which is commonly used as a fuel for flexible fuel cars. This article presents results from combustion tests conducted on a single-cylinder research engine at full load working at 600 rpm at a compression ratio of 9.5:1, and an equivalence ratio of 1. The analysis showed improvements in combustion and engine performance. It was found that, due to the higher calorific value of the blend, the engine possessed a higher indicated mean effective pressure. It was also found that optimal spark timing for this ethanol-pyrolysis oil blend was improved at a crank angle of 2–3° at 600 rpm. In summary, ethanol-pyrolysis oil blends at a volumetric ratio of 3:1 (25% pyrolysis oil) can successfully substitute ethanol in spark-ignition engines, particularly for vehicles with flexible fuel type.

scholarly journals Performance and Emissions Analysis of N-Butanol Blended with Gasoline in Spark Ignition Engine

2018 ◽  
Vol 8 (4) ◽  
Author(s):  
Abdulrahman A ◽  
Adisa A. B. ◽  
Dandakouta H.
Keyword(s):  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Specific Energy Consumption ◽  
Engine Performance ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Gaseous Emissions ◽  
Exhaust Temperature ◽  
Carbon Dioxide Co2

The power developed by an internal-combustion engine depends upon the fuel used for combustion. Fuels commonly used in internal combustion engines are derived from crude oil, which are depleting and are important sources of air pollution. In this study, n-butanol was used as an additive with gasoline as fuel in spark ignition engine. N-butanol exhibits good burning characteristics, contain oxygen, reduces some exhaust emissions and as well, has energy density and octane rating close to that of gasoline. The various blend rates (4, 8, 12, 16 and 20 percent by volume) were used in the engine performance analysis using a TD110-115 single cylinder, four-stroke air-cooled spark ignition engine test rig, under different loading conditions. An SV-5Q automobile exhausts gas analyzer was used to measure the concentration of gaseous emissions such as unburnt hydrocarbon (UHC), carbon monoxide (CO), and carbon dioxide (CO2 ) from the engine tail pipe. The results of engine performance showed reduction in the exhaust temperature was observed for the blends than to that of gasoline. It was observed that all the blends improved the brake thermal efficiency and exhibited high fuel consumption, lower specific energy consumption and lower emissions than gasoline. All the blends performed satisfactorily on spark-ignition engine without engine modification.

3D CFD Simulations of Hydrogen Fuelled Spark Ignition Engine

2008 ◽  
Author(s):  
Dinesh D. Adgulkar ◽  
N. V. Deshpande ◽  
S. B. Thombre ◽  
I. K. Chopde
Keyword(s):  
Internal Combustion Engine ◽  
Power Output ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Flame Speed ◽  
Spark Ignition Engine ◽  
Cfd Simulations ◽  
Turbulent Flame Speed ◽  
Combustion Of Hydrogen

By supporting hydrogen as an alternative fuel to the conventional fuel i.e. gasoline, new era of renewable and carbon neutral energy resources can be introduced. Hence, development of hydrogen fuelled internal combustion engine for improved power density and less emission of NOx has become today’s need and researchers are continuously extending their efforts in the improvement of hydrogen fuelled internal combustion engine. In this work, three dimensional CFD simulations were performed using CFD code (AVL FIRE) for premixed combustion of hydrogen. The simplified 3D geometry of engine with single valve i.e. inlet valve was considered for the simulation. Various combustion models for spark ignition for hydrogen i.e. Eddy Breakup model, Turbulent Flame Speed Closure Combustion Model, Coherent Flame model, Probability Density Function model were tested and validated with available simulation results. Results obtained in simulation indicate that the properties of hydrogen i.e. high flame speed, wide flammability limit, and high ignition temperature are among the main influencing factors for hydrogen combustion being different than that of gasoline. Different parameters i.e. spark advance angle (TDC to 40° before TDC in the step of 5°), rotational speed (1200 to 3000 rpm in the step of 300 rpm), equivalence ratio (0.5 to 1.2 in the step of 0.1), and compression ratio (8, 9 and 10) were used to simulate the combustion of hydrogen in spark ignition engine and to investigate their effects on the engine performance, which is in terms of pressure distribution, temperature distribution, species mass fraction, reaction progress variable and rate of heat release for complete cycle. The results of power output for hydrogen were also compared with that of gasoline. It has been observed that power output for hydrogen is almost 12–15% less than that of gasoline.

Development of a Computer Controlled Valve System for an Internal Combustion Engine

2002 ◽  
Author(s):  
Paul Sullivan ◽  
Harry Petersen
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Computer Control ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Spark Ignition Engines ◽  
State University ◽  
Senior Design ◽  
Operational Issues ◽  
Exhaust Valves

A newly emerging method of improving gas mileage and emissions from spark ignition engines is by computer control of the operation of the engine intake and exhaust valves. By controlling valve timing and duration the elimination of the throttle, a source of pumping loses can be minimized. One system is now in production by BMW, which uses a mechanism that varies the rocker arm ratio to vary the intake valve’s lift. As part of two Senior Design Projects a spark ignition internal combustion engine was modified at Minnesota State University, Mankato, to allow computer control of the engine’s valves. These projects worked at replacing the mechanically operated intake and exhaust valves with pneumatically operated valves controlled by computer in the form of a Programmable Logic Controller. The valves controlled by the solenoids switched compressed air to pneumatic cylinders that operate the existing poppet intake and exhaust valves on the engine. This paper will present the background, operational issues, and the initial results of the project.

scholarly journals Development of a Computationally Efficient Tabulated Chemistry Solver for Internal Combustion Engine Optimization Using Stochastic Reactor Models

2020 ◽  
Vol 10 (24) ◽  
pp. 8979
Author(s):  
Andrea Matrisciano ◽  
Tim Franken ◽  
Laura Catalina Gonzales Mestre ◽  
Anders Borg ◽  
Fabian Mauss
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Reactor Model ◽  
Progress Variable ◽  
Tabulated Chemistry ◽  
Computer Aided ◽  
Reactor Models

The use of chemical kinetic mechanisms in computer aided engineering tools for internal combustion engine simulations is of high importance for studying and predicting pollutant formation of conventional and alternative fuels. However, usage of complex reaction schemes is accompanied by high computational cost in 0-D, 1-D and 3-D computational fluid dynamics frameworks. The present work aims to address this challenge and allow broader deployment of detailed chemistry-based simulations, such as in multi-objective engine optimization campaigns. A fast-running tabulated chemistry solver coupled to a 0-D probability density function-based approach for the modelling of compression and spark ignition engine combustion is proposed. A stochastic reactor engine model has been extended with a progress variable-based framework, allowing the use of pre-calculated auto-ignition tables instead of solving the chemical reactions on-the-fly. As a first validation step, the tabulated chemistry-based solver is assessed against the online chemistry solver under constant pressure reactor conditions. Secondly, performance and accuracy targets of the progress variable-based solver are verified using stochastic reactor models under compression and spark ignition engine conditions. Detailed multicomponent mechanisms comprising up to 475 species are employed in both the tabulated and online chemistry simulation campaigns. The proposed progress variable-based solver proved to be in good agreement with the detailed online chemistry one in terms of combustion performance as well as engine-out emission predictions (CO, CO2, NO and unburned hydrocarbons). Concerning computational performances, the newly proposed solver delivers remarkable speed-ups (up to four orders of magnitude) when compared to the online chemistry simulations. In turn, the new solver allows the stochastic reactor model to be computationally competitive with much lower order modeling approaches (i.e., Vibe-based models). It also makes the stochastic reactor model a feasible computer aided engineering framework of choice for multi-objective engine optimization campaigns.

scholarly journals The impact of ignition system damage on the emission of toxic substances in a spark-ignition internal combustion engine

2019 ◽  
Vol 179 (4) ◽  
pp. 86-92
Author(s):  
Mieczysław DZIUBIŃSKI ◽  
Ewa SIEMIONEK ◽  
Artur DROZD ◽  
Michał ŚCIRKA ◽  
Adam KISZCZAK ◽  
...  
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Exhaust Gas ◽  
Toxic Substances ◽  
Ignition System ◽  
The Impact

The article discusses the impact of ignition system damage on the emission of toxic subcategories in a spark-ignition internal combustion engine. The aim of the work was to develop an analytical model of ignition system diagnostics, test performance and comparative analysis of the results of simulations and experiments. The model developed allows to analyse the basic parameters of the ignition system affecting the content of toxic substances in the exhaust. Experimental tests were carried out using the MAHA MGT5 exhaust gas analyser for four different combustion engines fueled with petrol at various operating conditions. During the tests, the content of toxic substances in the exhaust gas of a properly working engine and the engine working with damage to the ignition system were registered. The tests will be used to assess the impact of the damage of the spark-ignition engine on the emission of individual components of toxic fumes.

A Learning Algorithm for Optimal Internal Combustion Engine Calibration in Real Time

2007 ◽  
Author(s):  
Andreas A. Malikopoulos ◽  
Panos Y. Papalambros ◽  
Dennis N. Assanis
Keyword(s):  
Internal Combustion Engine ◽  
Real Time ◽  
Fuel Economy ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Pollutant Emissions ◽  
Engine Operation ◽  
Engine Calibration

Advanced internal combustion engine technologies have increased the number of accessible variables of an engine and our ability to control them. The optimal values of these variables are designated during engine calibration by means of a static correlation between the controllable variables and the corresponding steady-state engine operating points. While the engine is running, these correlations are being interpolated to provide values of the controllable variables for each operating point. These values are controlled by the electronic control unit to achieve desirable engine performance, for example in fuel economy, pollutant emissions, and engine acceleration. The state-of-the-art engine calibration cannot guarantee continuously optimal engine operation for the entire operating domain, especially in transient cases encountered in driving styles of different drivers. This paper presents the theoretical basis and algorithmic implementation for allowing the engine to learn the optimal set values of accessible variables in real time while running a vehicle. Through this new approach, the engine progressively perceives the driver’s driving style and eventually learns to operate in a manner that optimizes specified performance indices. The effectiveness of the approach is demonstrated through simulation of a spark ignition engine, which learns to optimize fuel economy with respect to spark ignition timing, while it is running a vehicle.

scholarly journals Analysis of Air Flow, Air and Fuel Induction for Internal Combustion Engine

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Mohd Fitri Arshad ◽  
◽  
Muhammad Faris Ahmad ◽  
Amir Khalid ◽  
Izuan Amin Ishak ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Flow Behavior ◽  
Combustion Process ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Internal Combustion ◽  
Spark Ignition Engine ◽  
Rotating Flow

In an internal combustion engine, performance, efficiency and emission formation depends on the formation of air-fuel mixture inside the engine cylinder. The fluid flow dynamics plays an important role for air-fuel mixture preparation to obtain the better engine combustion, performance and efficiency. This review article discuss the rotating flow (swirl and tumble) in premixed spark-ignition engine and its effect on turbulence generation and flame propagation. Rotating flow can substantially increase turbulence intensity for the duration of the combustion period. This review paper discusses the in-cylinder swirl and tumble flow that affects air induction during the combustion process in internal combustion engine. Alternatively, this study using computer simulation (Computational Fluid Dynamic, CFD) which offer the opportunity to carry out repetitive parameter studies. An integration-type flowmeter (IFM) also has been used which consists of ultrasonic flowmeter, that integrates the flowrate during the intake process, gives accurate measurements regardless of sampling time and frequency. Research parameter in this study was swirl and tumble that represents the fluid flow behavior occurred inside combustion chamber. Fuel injection and air mass also were the important parameters that have been discussed about in air induction process. The results obtain from the numerical analysis can be employed to examine the homogeneity of air-fuel mixture structure for better combustion process and engine performance.

The Destruction of Exergy During the Combustion Process for a Spark-Ignition Engine

2010 ◽  
Author(s):  
Jerald A. Caton
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Combustion Process ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Design Parameters ◽  
Base Case ◽  
Operating Parameters ◽  
Wide Range

The second law of thermodynamics provides the mechanism for assessing the quality of energy. The non-conserved property used for this assessment is called exergy, availability or available energy. For the internal combustion engine, the exergy of the fuel is distributed among work, heat transfer, exhaust, and is destroyed by several processes. The major destruction of exergy for the internal combustion engine is during the combustion process. This paper documents this destruction for a wide range of engine operating parameters, design parameters, and fuels. A 5.7 liter, spark ignition, automotive engine was selected for this study. Operating parameters that were examined included equivalence ratio, speed, load and spark timing. Design parameters that were examined included compression ratio, expansion ratio and the use of turbocharging. Combustion parameters and oxidizer were examined as well. The fuels examined included isooctane (base), methane, propane, hexane, methanol, ethanol, hydrogen and carbon monoxide. For the part load base case (1400 rpm and a bmep of 325 kPa) using isooctane, the destruction of exergy was 21% of the fuel exergy. For many of the engine operating and design parameters, this destruction was relatively constant (between about 20 and 23%). The parameters that resulted in the greatest change of the exergy destruction were (1) exhaust gas recirculation, and (2) inlet oxygen concentration. In general, the amount of the destruction of exergy during the combustion processes was associated with the level of the combustion temperatures.

Sign in / Sign up

Export Citation Format

Share Document