scholarly journals Evaluation of Home Energy Efficiency Improvements in a Hot Desert Climate in Northwestern Mexico: The Energy Saving vs. Money Saving Conflict

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7909
Author(s):  
Edgar Valenzuela ◽  
Hector Campbell ◽  
Gisela Montero ◽  
Marcos A. Coronado ◽  
Alejandro A. Lambert-Arista ◽  
...  

Reducing household energy consumption is one of the most important strategies used to decrease fossil fuel consumption and greenhouse gases emissions, and to encourage renewable energy utilization. Most energy conservation strategies in the domestic sector are aimed at preferential loans, i.e., purchasing renewable electricity or to improve the efficiency of home appliances, such as air conditioning and lighting. However, despite the relative economic successes of these technologies, they have not had expected impacts in regard to energy consumption. In this work, the authors analyzed the consumption patterns of two equivalent households—one was adapted with improved thermal insulation and a 1.2 kW photovoltaic system to reduce consumption from the electrical grid. The results show that dwellings where no improvements were made registered lower electric energy consumption, due the fact that users were aware that no strategy had been implemented, and its consumption; hence, electricity payments depended solely on one’s attention over the electronic device operations. On the other hand, energy conservation strategies in households promotes confident and relaxed attitudes toward the use of energy, leading to lower energy billings, but a higher gross energy consumption.

Processes ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1539
Author(s):  
Yu-Chen Hu ◽  
Yu-Hsiu Lin ◽  
Harinahalli Lokesh Gururaj

The key advantage of smart meters over rotating-disc meters is their ability to transmit electric energy consumption data to power utilities’ remote data centers. Besides enabling the automated collection of consumers’ electric energy consumption data for billing purposes, data gathered by smart meters and analyzed through Artificial Intelligence (AI) make the realization of consumer-centric use cases possible. A smart meter installed in a domestic sector of an electrical grid and used for the realization of consumer-centric use cases is located at the entry point of a household/building’s electrical grid connection and can gather composite/circuit-level electric energy consumption data. However, it is not able to decompose its measured circuit-level electric energy consumption into appliance-level electric energy consumption. In this research, we present an AI model, a neuro-fuzzy classifier integrated with partitional clustering and metaheuristically optimized through parallel-computing-accelerated evolutionary computing, that performs energy decomposition on smart meter data in residential demand-side management, where a publicly available UK-DALE (UK Domestic Appliance-Level Electricity) dataset is used to experimentally test the presented model to classify the On/Off status of monitored electrical appliances. As shown in this research, the presented AI model is effective at providing energy decomposition for domestic consumers. Further, energy decomposition can be provided for industrial as well as commercial consumers.


Author(s):  
Wilber Manuel Saltos Arauz ◽  
Gabriela Intriago Cedeño ◽  
Susana Salvatierra Chávez ◽  
Antonio Vázquez Pérez ◽  
María Rodríguez Gámez

The emergence and development of Microgrids emerge as an alternative to the distributed generation that is becoming more and more effective at an international level. The research aims to perform an analysis on the behavior of na microrred designed in an urban environment operating connected to the main electrical network or outside it. A technical evaluation of the connected photovoltaic power plant is carried out as a microrred obtaining as a result the improvement of the profiles of voltage, current and apparent power, at the same time that it favors the reduction of the electric energy consumption of the conventional network, with the potential to decrease The amount of the electric bill, contributing to the reduction of oil consumption and CO2 emissions to the atmosphere.


2012 ◽  
Vol 7 (3) ◽  
pp. 23-32 ◽  
Author(s):  
Miloslav Bagoňa ◽  
Dušan Katunský ◽  
Martin Lopušniak ◽  
Marián Vertaľ

2021 ◽  
Vol 13 (8) ◽  
pp. 4180
Author(s):  
Andrzej Czerepicki ◽  
Tomasz Krukowicz ◽  
Anna Górka ◽  
Jarosław Szustek

The article presents an analysis of priority solutions for trams at a selected sequence of intersections in Warsaw (Poland). An analysis of the literature has shown the topicality of this issue. A computer simulation model of a coordinated sequence of intersections was constructed. Three test scenarios were designed: the existing control system, the new coordinated fixed-time control system, and the adaptive control system with active priority. In the simulation process, detailed travel characteristics of trams and other traffic participants in a selected section were obtained for the three varying scenarios. Electric energy consumption for traction needs and pollutant emissions was then estimated for each of the variants. It was concluded that for the analyzed configuration, implementation of the adaptive priority will result in a reduction of tram time losses by up to 25%, a reduction in energy consumption by up to 23%, and a reduction in the emission of pollutants from individual vehicles by up to 3% in relation to the original variant. The conducted research may be the basis for a comprehensive method of assessing the effectiveness of applying the adaptative priority when designing new tramway lines and modernizing the existing ones.


2012 ◽  
Vol 16 (3) ◽  
pp. 131
Author(s):  
Didik Ariwibowo

Didik Ariwibowo, in this paper explain that energy audit activities conducted through several phases, namely: the initial audit, detailed audit, analysis of energy savings opportunities, and the proposed energy savings. Total energy consumed consists of electrical energy, fuel, and materials in this case is water. Electrical energy consumption data obtained from payment of electricity accounts for a year while consumption of fuel and water obtained from the payment of material procurement. From the calculation data, IKE hotels accounted for 420.867 kWh/m2.tahun, while the IKE standards for the hotel is 300 kWh/m2.tahun. Thus, IKE hotel included categorized wasteful in energy usage. The largest energy consumption on electric energy consumption. Largest electric energy consumption is on the air conditioning (AC-air conditioning) that is equal to 71.3%, and lighting and electrical equipment at 27.28%, and hot water supply system by 4.44%. Electrical energy consumption in AC looks very big. Ministry of Energy and Mineral Resources of the statutes, the profile of energy use by air conditioning at the hotel by 48.5%. With these considerations in the AC target for audit detail as the next phase of activity. The results of a detailed audit analysis to find an air conditioning system energy savings opportunities in pumping systems. Recommendations on these savings is the integration of automation on the pumping system and fan coil units (FCU). The principle of energy conservation in the pumping system is by installing variable speed drives (VSD) pump drive motor to adjust speed according to load on the FCU. Load variations FCU provide input on the VSD pumps to match. Adaptation is predicted pump can save electricity consumption up to 65.7%. Keywords: energy audit, IKE, AC


2011 ◽  
Vol 314-316 ◽  
pp. 2071-2075
Author(s):  
Jia Hai Wang ◽  
Wen Tao Gong

Discrete machine manufacture enterprises have to induce new low-carbon manufacturing model in order to solve a dilemma of mutual restraint between development and electric energy consumption. The paper presents an approach to solve JSP with the objective of minimizing the energy consumption by shortening the distance between electricity peak and valley according to theory of load shifting in electricity. The mathematical model is proposed for JSP with objective of minimizing the energy consumption and processing time of entire batch, then the idea of time division is introduced, and a solving method based on GA built-in eM-Plant is employed to verify the model and get satisfactory scheduling results.Discrete machine manufacture enterprises have to induce new low-carbon manufacturing model in order to solve a dilemma of mutual restraint between development and electric energy consumption. The paper presents an approach to solve JSP with the objective of minimizing the energy consumption by shortening the distance between electricity peak and valley according to theory of load shifting in electricity. The mathematical model is proposed for JSP with objective of minimizing the energy consumption and processing time of entire batch, then the idea of time division is introduced, and a solving method based on GA built-in eM-Plant is employed to verify the model and get satisfactory scheduling results.


Sign in / Sign up

Export Citation Format

Share Document