scholarly journals Dynamic Modelling and Advanced Process Control of Power Block for a Parabolic Trough Solar Power Plant

Energies ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 129
Author(s):  
Wisam Abed Kattea Al-Maliki ◽  
Auday Shaker Hadi ◽  
Hussein M. H. Al-Khafaji ◽  
Falah Alobaid ◽  
Bernd Epple
Keyword(s):  
Power Plant ◽  
Dynamic Simulation ◽  
Power Plants ◽  
Dynamic Modelling ◽  
Real Data ◽  
Parabolic Trough ◽  
Advanced Process Control ◽  
Control Loops ◽  
Power Block ◽  
And Control

A fundamental task in the dynamic simulation of parabolic trough power plants (PTPP) is to understand the behavior of the system physics and control loops in the presence of weather variations. This study provides a detailed description of the advanced controllers used in the power block (PB) of a 50 MWel parabolic trough power plant (PTPP). The PB model is achieved using APROS software based on the actual specifications of the existing power plant. To verify the behaviour of the PB model, a comparison between the simulated results and given real data is documented depending on a previous study, and the results indicate a reasonable degree of correspondence. The purpose of this study is to create reference models for the PB. Thereby, developers and engineers will have a better understanding of the state of the art of advanced control loops in these power plants. Moreover, these types of models can be used to specify the most suitable mode of operation for the power plant. In addition, this study gives an overview of dynamic simulation for the design, optimisation and development of power blocks in parabolic trough power plants.

scholarly journals SIMULATION STUDY OF PARABOLIC TROUGH SOLAR POWER PLANTS IN BRAZIL

2019 ◽  
Vol 7 (8) ◽  
pp. 17-28
Author(s):  
Antonio Marcos De Oliveira Siqueira ◽  
Gabi Antoine Altabash ◽  
Rayan Fadi Barhouche ◽  
Gabriel Siqueira Silva ◽  
Fábio Gonçalves Villela
Keyword(s):  
Power Plant ◽  
Heat Exchangers ◽  
Solar Collector ◽  
Power Plants ◽  
Solar Power ◽  
Simulation Software ◽  
Heat Transfer Fluid ◽  
Electricity Production ◽  
Parabolic Trough ◽  
Power Block

Various data reveals the potential of concentrated solar technologies for the electricity production. With global growing energy demand and green-house gas emission, concentrating solar power is considered as one of the promising options and has invited wide attention. In this work, a model for a 30 MW parabolic trough solar power plant system was developed for 31 different locations in Brazil, using TRNSYS simulation software, and TESS and STEC libraries. The power system consists of a parabolic trough solar collector loop connected to a power block by a series of heat exchangers. The solar collector loop consists of a field of parabolic trough collectors, stratified thermal storage tank, pump and heat exchangers to drive the power block and uses Therminol VP1 as heat transfer fluid. The results show that the cities of Recife (PE), Fortaleza (CE), Belterra (PA), Salvador (BA) and Petrolina (PE) stand out for their high monthly values of direct normal irradiation and, resulting the highest production of energy by the same configuration of Solar Central Power Plant.

scholarly journals Optimization of a Small Wind Power Plant for Annual Wind Speed Distribution

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1587
Author(s):  
Krzysztof Wrobel ◽  
Krzysztof Tomczewski ◽  
Artur Sliwinski ◽  
Andrzej Tomczewski
Keyword(s):  
Wind Speed ◽  
Power Plant ◽  
Wind Power ◽  
Power Plants ◽  
Control Method ◽  
Wind Power Plant ◽  
Switched Reluctance ◽  
Wind Speeds ◽  
Wind Speed Distribution ◽  
And Control

This article presents a method to adjust the elements of a small wind power plant to the wind speed characterized by the highest annual level of energy. Tests were carried out on the basis of annual wind distributions at three locations. The standard range of wind speeds was reduced to that resulting from the annual wind speed distributions in these locations. The construction of the generators and the method of their excitation were adapted to the characteristics of the turbines. The results obtained for the designed power plants were compared with those obtained for a power plant with a commercial turbine adapted to a wind speed of 10 mps. The generator structure and control method were optimized using a genetic algorithm in the MATLAB program (Mathworks, Natick, MA, USA); magnetostatic calculations were carried out using the FEMM program; the simulations were conducted using a proprietary simulation program. The simulation results were verified by measurement for a switched reluctance machine of the same voltage, power, and design. Finally, the yields of the designed generators in various locations were determined.

Operation and Control of the PBMR Demonstration Power Plant

2006 ◽  
Author(s):  
Petrus D. Kemp ◽  
Chris Nieuwoudt
Keyword(s):  
Power Plant ◽  
Transient Analysis ◽  
Power Plants ◽  
Closed Loop ◽  
Control Strategies ◽  
Power Conversion ◽  
Conversion Unit ◽  
Demonstration Plant ◽  
And Control ◽  
Direct Cycle

A large interest in High Temperature Gas-cooled Reactors (HTGR) has been shown in recent years. HTGR power plants show a number of advantages over existing technology including improved safety, modular design and high temperatures for process heat applications. HTGR plants with closed loop direct cycle power conversion units have unique transient responses which is different from existing nuclear plants as well as conventional non-nuclear power plants. The operation and control for a HTGR power plant therefore poses new and different challenges. This paper describes the modes of operation for the Pebble Bed Modular Reactor (PBMR) demonstration plant. The PBMR demonstration plant is an advanced helium-cooled, graphite-moderated HTGR consisting of a closed loop direct cycle power conversion unit. The use of transient analysis simulation makes it possible to develop effective control strategies and design controllers for use in the power conversion unit as well as the reactor. In addition to plant controllers the operator tasks and operational technical specifications can be developed and evaluated making use of transient analysis simulation of the plant together with the control system. The main challenges in the operation and control of the reactor and power conversion unit are highlighted with simulation results. Control strategies in different operating regions are shown and results for the power conversion unit start-up transition and the loss of the grid connection during power operation are presented.

Thermoeconomic Study of a Small Parabolic Trough Solar Plant

2010 ◽  
Author(s):  
M. D. Duran ◽  
E. A. Rinco´n ◽  
M. Sa´nchez
Keyword(s):  
Power Plant ◽  
Optimization Model ◽  
Power Plants ◽  
Optimization Problem ◽  
Pressure Level ◽  
Combined Cycle ◽  
Design Parameters ◽  
Parabolic Trough ◽  
Solar Plant ◽  
Solar Power Plants

This work describes the thermoeconomic study of an integrated combined cycle parabolic trough power plant. The parabolic trough plant will economize boiler activity, and thus the thermoeconomic optimization of the configuration of the boiler, including the parabolic trough plant, will be achieved. The objective is to obtain the optimum design parameters for the boiler and the size of the parabolic field. The proposal is to apply the methodology employed by Duran [1] and Valde´s et. al. [2], but with the inclusion of the parabolic trough plant into the optimization problem. It is important to point out that the optimization model be applied to a single pressure level configuration. For future works, it is proposed that the same model be applied to different configurations of integrated combined cycle solar power plants. As a result the optimum thermoeconomic design will be obtained for a parabolic trough plant used to economize the HRSG.

Go With the Flow: The Evolvement of Geothermal Wellhead Maintenance at the Hellisheidi Power Plant

2014 ◽  
Author(s):  
Reynir S. Atlason ◽  
Oli P. Geirsson ◽  
Ari Elisson ◽  
Runar Unnthorsson
Keyword(s):  
Power Plant ◽  
Geothermal Energy ◽  
Power Plants ◽  
Waiting Times ◽  
District Heating ◽  
Real Data ◽  
Energy Company ◽  
Power Company ◽  
Geothermal Power ◽  
Maintenance Model

Iceland relies greatly on geothermal energy, for electricity, district heating and industrial activities. It is therefore of great importance that the maintenance on site is carried out quite successfully to minimize down time. Reykjavik Energy is the largest energy company in Iceland utilizing geothermal energy. The company operates two cogenerating geothermal power plants, Hellisheidi (303 MWe and 133 MWt) and Nesjavellir (120 MWe and 300 MWt). In this study we investigate the development of the wellhead maintenance at the Hellisheidi geothermal power plant. We look at the maintenance recommendations provided to on-site employees and how maintenance procedures have developed since the power plant began its operations. We investigate real data retrospectively and use it to calculate expected waiting times between repairs. The result is a maintenance model based on the observed and statistically analyzed data provided by the power company on the maintenance procedures. Such model should prove of great significance to other geothermal power plants in the early stages of planning the wellhead maintenance.

On the Control of the Collector Field Outlet Temperature of Shiraz 250 KW Solar Power Plant

2012 ◽  
Vol 260-261 ◽  
pp. 163-168 ◽  
Author(s):  
Mostafa Zamani Mohi Abadi ◽  
Seyed Mohammad Hessam Mohammadi ◽  
Seyed Ali Akbar Safavi ◽  
Seyed Vahid Naghavi
Keyword(s):  
Power Plant ◽  
Solar Power ◽  
Real Data ◽  
Outlet Temperature ◽  
Solar Power Plant ◽  
Modeling And Control ◽  
The Real ◽  
Standard Tool ◽  
And Control ◽  
Control Study

This paper presents a control study of the real Shiraz 250KW solar power plant together with a modeling and a monitoring interface. Here, a PID controller is developed to control the outlet oil temperature of the collector field of the solar power plant as a standard tool for industrial automation. First the power plant is modeled within MATLAB environment and the model is verified with the real data of the power plant. Then an HMI environment is developed within the LabVIEWsoftwarewhile incorporating the model developed in MATLAB. The simulation results showed that a fixed-coefficient PID failed to provide the desired results over a year and the best coefficients for each month were calculated. The friendly and accurate developed environment within MATLAB and LabVIEW provide a valuable tool for modeling and control studies and monitoring of the real power plant.

Sign in / Sign up

Export Citation Format

Share Document