scholarly journals The Quality of Red Bell Pepper Subjected to Freeze-Drying Preceded by Traditional and Novel Pretreatment

Foods ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 226
Author(s):  
Katarzyna Rybak ◽  
Artur Wiktor ◽  
Dorota Witrowa-Rajchert ◽  
Oleksii Parniakov ◽  
Małgorzata Nowacka
Keyword(s):  
Freeze Drying ◽  
Bell Pepper ◽  
Total Phenolic ◽  
Thermal Methods ◽  
Drying Time ◽  
Freeze Dried ◽  
Dehydration Processes ◽  
Vacuum Freezing ◽  
Better Than

It has been demonstrated previously in the literature that utilization of PEF or a combination of a pulsed electric field (PEF) and ultrasounds (US) can facilitate dehydration processes and improve the quality of dried products even better than the application of thermal methods such as blanching. The aim of the study was to evaluate the quality of red bell pepper subjected to freeze-drying preceded by blanching or PEF or US treatment applied in a single and combined mode. Furthermore, the freeze-drying was preceded by shock freezing or vacuum freezing performed inside the freeze-dryer as a result of pressure drop during the first stage of freeze-drying. All of the analyzed technological variants enhanced the drying kinetics when compared to the intact material. Freeze-dried bell pepper subjected to non-thermal pretreatment exhibited higher vitamin C, total phenolic and carotenoids content than blanched material despite the fact that blanching reduced drying time the most compared to all other analyzed methods.

scholarly journals ASSESSMENT OF FREEZING PRE-TREATMENTS FOR THE FREEZE DRIED OF APPLE SLICES

2013 ◽  
Vol 17 (2) ◽  
pp. 3-14 ◽  
Author(s):  
Tamás Antal ◽  
László Sikolya ◽  
Benedek Kerekes
Keyword(s):  
Water Activity ◽  
Freeze Drying ◽  
Color Difference ◽  
Freezing Rate ◽  
Slow Freezing ◽  
Drying Process ◽  
Drying Time ◽  
Freeze Dried ◽  
Apple Slices

Abstract The effect of freezing rate on the quality of dried Jonagold and Idared was studied. Apple slices underwent various pre-treatments, i.e. freezing in household freezer (freezing rate: 0,5 °C/min), contact plate freezing (2 °C/min) and vacuum-freezing (3 °C/min). The quality of the freeze dried product was then evaluated in terms of water activity, hardness, color and rehydration. The freezing in household freezer (slow freezing rate) significantly reduces the duration of the freeze drying process and consequently the process costs. The slow freezing rate allows the growth of large ice crystals at the beginning of the freeze-drying process, this fact should consequently lead to larger pores and injured cell walls and thus to shorter freeze drying time. Quality of the freezing in household freezer product was assessed as higher than the quality of the other freezing pre-treated material. Slow freezing rate resulted softer texture and higher rehydration capacity, than that of other pre-treated samples. In all cases, slow freezing lead to lower final moisture content, total color difference and water activity.

scholarly journals Evaluation of freezing pre-treatments for the lyophilisation of apple

2013 ◽  
Vol 5 (1) ◽  
pp. 56-68
Author(s):  
Tamás Antal ◽  
László Sikolya ◽  
Benedek Kerekes
Keyword(s):  
Water Activity ◽  
Freeze Drying ◽  
Ice Crystals ◽  
Freezing Rate ◽  
Slow Freezing ◽  
Drying Process ◽  
Drying Time ◽  
Freeze Dried ◽  
Apple Slices

Abstract The effect of freezing rate on the quality of dried Jonagold and Idared (Malus domestica Borkh.) was studied. Apple slices underwent various pre-treatments, i.e. freezing in household freezer (freezing speed/rate: 0,5◦C/min), contact plate freezing (2◦C/min) and vacuumfreezing (3◦C/min). The quality of the freeze-dried product was then evaluated in terms of water activity (aw), hardness, color and rehydration. The texture and color experiments were carried out with texture analyser and colorimeter. The aw of apple slices was measured by aw apparatus. It was found that drying time was influenced by freezing rate. The freezing in household freezer (slow freezing rate) significantly reduces the duration of the freeze-drying process and consequently the process costs. The slow freezing rate allows the growth of large ice crystals at the beginning of the freeze-drying process; this fact should consequently lead to larger pores and injured cell walls and thus to shorter freeze-drying time. Quality of the freezing in household freezer product was assessed as higher than the quality of the other freezing pre-treated material. Slow freezing rate resulted softer texture and higher rehydration capacity than that of other pre-treated samples. In all cases, slow freezing speed lead to lower final moisture content, total color difference and water activity. Freeze-dried samples prepared with higher freezing rates (3◦C/min) were the most white in color because small pores, originated by sublimation of small ice crystals formed by fast freezing.

scholarly journals Microplasma Pretreatment f Mango Fruits During Freeze Drying with Thermoelectric Emission

2020 ◽  
Vol 50 (4) ◽  
pp. 681-689
Author(s):  
Maxim Sosnin ◽  
Ivan Shorstkii
Keyword(s):  
Antioxidant Capacity ◽  
Freeze Drying ◽  
Total Content ◽  
Thermal Method ◽  
High Quality ◽  
Mango Fruit ◽  
Drying Time ◽  
Freeze Dried ◽  
Dpph Method

Introduction. The research objective was to study the effect of filamentous microplasma pretreatment on the efficiency of freeze drying. It featured mango fruit and assessed the quality of the dried product. Year-round availability of exotic fruit poses a challenge of providing consumers with high-quality food products. Freeze-drying, if combined with advanced electrophysical technologies, makes it possible to maintain the high quality of the product while improving the processing. This non-thermal method technology presupposes pretreatment with filamentous microplasma (FM) and thermoelectric emission. FM affects the membrane of plant cells and forms a through channel, thus improving mass transfer. Study objects and methods. Before freeze-drying, fresh mango fruit was cut into slices of 6.0 ± 0.5 mm each and the average diameter of 72 ± 3 mm. Freeze-dried fruits were analyzed according to the degree of rehydration and quality. FM treatment was performed at the electric field strength E = 600 kV/m, while the specific energy was 1 kJ/kg per unit. Results and discussion. FM pretreatment with thermoelectric emission reduced the drying time by 38%, which was enough to achieve equilibrium moisture content. It also increased the degree of rehydration from 2.58 to 3.14. FM pretreatment raised the total content of phenols and carotenoids, but reduced the total content of flavonoids. FM pretreatment also affected the antioxidant capacity, reducing it from 0.43 to 0.41 by the ABTS method and from 0.90 to 0.75 by the DPPH method. Conclusion. FM pretreatment increased the ability to restore the freeze-dried samples. The mango samples preserved the high content of phenols and carotenoids. The antioxidant capacity of the FM-treated samples proved to be slightly lower than in the control samples. In general, pretreatment with filamentous microplasma and thermoelectric emission had a positive effect on the quality of freeze-dried mango, reduced the processing time, and improved the rehydration characteristics of the final product.

scholarly journals Comparison of Different Drying Methods and Preservatives on the Proximate Composition, Colour and Total Phenolic Content of Dried Ginger.

2020 ◽  
Vol 11 (1S) ◽  
Author(s):  
Nurhidayah Hanim Mohamad ◽  
Asmaliza Abd Ghani ◽  
Nurul Zaizuliana Rois Anwar ◽  
Norzaida Yusof ◽  
Yusof Nurhayati
Keyword(s):  
Proximate Composition ◽  
Total Phenolic Content ◽  
Phenolic Content ◽  
Total Phenolic ◽  
Drying Methods ◽  
Vacuum Oven ◽  
Drying Time ◽  
Freeze Dried ◽  
Tualang Honey

The present work proposed to compare three different drying methods i.e. sun drying, vacuum oven drying and freeze drying of ginger to determine the proximate composition, colour analysis and total phenolic content. These dried gingers were preserved by using sugar (control), Tualang honey and Kelulut honey. It showed that freeze dried ginger presents the best result for retaining nutrients, colour and total phenolic content compared to other drying methods. For colour analyses, sun dried samples resulted in the lowest value of L* were 50.94, 51.24 and 52.22 for control, Tualang honey and Kelulut honey due to longer drying time and oxygen exposure. Among all preservatives used, Tualang honey produced the best quality of dried ginger as the highest total phenolic content was 26.73 mg gallic acid/g.

The Quality of Freeze-Dried and Rehydrated Blueberries Depending on their Size and Preparation for Freeze-Drying

2020 ◽  
Vol 24 (1) ◽  
pp. 61-78 ◽  
Author(s):  
Ireneusz Ochmian ◽  
Monika Figiel-Kroczyńska ◽  
Sabina Lachowicz
Keyword(s):  
Freeze Drying ◽  
Antidiabetic Activity ◽  
Highbush Blueberry ◽  
Drying Time ◽  
Biological Value ◽  
University Of Technology ◽  
Fresh Freeze ◽  
Freeze Dried ◽  
Very High

AbstractA significant increase in highbush blueberry plantings has been observed annually. However, there is a problem with the handling of fruit that does not meet the requirements for dessert berries. One of the methods to use the fruit is drying. The research was conducted in the Department of Horticulture at the West Pomeranian University of Technology in Szczecin. The fruit was harvested at a plantation specialising in the production of highbush blueberry from irrigated and non-irrigated plots. This study aimed to assess how cutting or pricking highbush blueberry fruit affects the duration of the sublimation drying process – freeze-drying. The biological value of fresh, freeze-dried, and rehydrated fruit was assessed. The amount of fruit left on bushes depended on the weather prevailing in the growing season, especially during the harvest period. The mass of fruit left on the bushes was approx. 1 to 2 t/ha. Although these fruits were small, they had a very high biological value. After freeze-drying and rehydration, the blueberry fruit retained their colour, high content of polyphenols and showed high antidiabetic activity and antioxidant capacity. The large fruit reached the moisture content of approx. 12%, which ensures safe storage and the appropriate texture, after 46 hours of drying, and the smaller fruit - after 32 hours. Fruit cutting or pricking reduced the drying time by half. Reducing this time decreased drying costs and increased biological value.

scholarly journals Energy and Quality Aspects of Freeze-Drying Preceded by Traditional and Novel Pre-Treatment Methods as Exemplified by Red Bell Pepper

2021 ◽  
Vol 13 (4) ◽  
pp. 2035
Author(s):  
Katarzyna Rybak ◽  
Oleksii Parniakov ◽  
Katarzyna Samborska ◽  
Artur Wiktor ◽  
Dorota Witrowa-Rajchert ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Freeze Drying ◽  
Bell Pepper ◽  
Drying Process ◽  
Drying Time ◽  
Statistical Point ◽  
Quality Aspects ◽  
Bell Peppers ◽  
Pre Treatment

Freeze-drying is one of the most expensive and most energy intensive processes applied in food technology. Therefore, there have been significant efforts to reduce the freeze-drying time and decrease its energy consumption. The aim of this work was to analyze the effect of pulsed electric field (PEF), ultrasound (US), and hybrid treatment (PEF-US) and compare them with the effect of blanching (BL) on the freeze-drying kinetics, energy consumption, greenhouse gasses emission, and physical quality of the product. The freeze-drying process was applied to red bell peppers after pretreatment operations. Results showed that application of BL, PEF, US, or PEF-US reduces freeze-drying time and decreases energy consumption. Among the tested methods, the combination of PEF performed at 1 kJ/kg and US was the most effective in reduction of greenhouse gas emission. BL samples exhibited the highest porosity, but from a statistical point of view, most of the PEF-US treated materials did not differ from it. The smallest color changes were noted for US pre-treated bell peppers (ΔE = 9.4), whereas BL, PEF, and PEF-US material was characterized by ΔE of 15.2–28.5. Performed research indicates the application of pre-treatment may improve the sustainability of freeze-drying process and quality of freeze-dried bell pepper.

scholarly journals Effect of Hot-Water Blanching Pretreatment on Drying Characteristics and Product Qualities for the Novel Integrated Freeze-Drying of Apple Slices

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Hai-ou Wang ◽  
Qing-quan Fu ◽  
Shou-jiang Chen ◽  
Zhi-chao Hu ◽  
Huan-xiong Xie
Keyword(s):  
Electron Microscopy ◽  
Freeze Drying ◽  
Hot Water ◽  
The Novel ◽  
Rehydration Ratio ◽  
Drying Time ◽  
Drying Characteristics ◽  
Promising Alternative ◽  
Freeze Dried ◽  
Apple Slices

The effect of hot-water blanching (HWB) on drying characteristics and product qualities of dried apple slices with the novel integrated freeze-drying (NIFD) process was investigated by comparing with 3 different FD methods. Compared with the NIFD process without HWB pretreatment (VF-FD), the NIFD process with HWB pretreatment (HWB-VF-FD) resulted in a significantly higher mass loss and more sufficient freezing in vacuum-frozen samples, significantly higher rehydration ratio (RR), higher shrinkage ratio (SR), smaller Vitamin C (VC) content and lower hardness and better apparent shape in freeze-dried samples, and fewer change to the color of the dried or rehydrated samples (p<0.05). Compared with the conventional FD process with HWB pretreatment (HWB-PF-FD), HWB-VF-FD cost significantly less processing time and FD time and obtained significantly higher RR (p<0.05), almost the equivalent SR, VC content, and hardness, and similar appearance in dried samples. The microstructure of apple cell tissues was analyzed by transmission electron microscopy and scanning electron microscopy to interpret the above differences in drying characteristics and product qualities. The results suggested that the NIFD process of apple slices with HWB pretreatment was a promising alternative method to decrease drying time, achieve similar product quality, and simplify the process steps of the conventional FD technology.

scholarly journals Effect of Supplementation of Dried Bioflocs Produced by Freeze-Drying and Oven-Drying Methods on Water Quality, Growth Performance and Proximate Composition of Red Hybrid Tilapia

2022 ◽  
Vol 10 (1) ◽  
pp. 61
Author(s):  
Tarq Binalshikh-Abubkr ◽  
Marlia Mohd Hanafiah
Keyword(s):  
Water Quality ◽  
Body Composition ◽  
Growth Performance ◽  
Freeze Drying ◽  
Energy Levels ◽  
Fish Growth ◽  
Drying Methods ◽  
Oven Drying ◽  
Freeze Dried

Supplementation of dried bioflocs for red hybrid tilapia (Oreochromis sp.) was examined during 57 days of feeding trials. Five experimental treatments; T1 (the control; without bioflocs), T2 (4% freeze-dried bioflocs), T3 (16% freeze-dried bioflocs), T4 (4% oven-dried bioflocs), and T5 (16% oven-dried bioflocs) were prepared to examine the water quality, growth performance and body composition of red hybrid tilapia. T2 and T4 treatments resulted in a higher growth rate and survival similar to the control, while T3 and T5 treatments showed the lowest values of growth performance among all treatments. T1 treatment showed the best quality of culture water followed by T2 and T4 treatments, while T3 treatment resulted in poor water quality followed by T5 treatment. Based on these results, the ratios of bioflocs (4% and 16%) had more effect on fish growth and water quality than the drying methods (freeze-drying and oven-drying). The ratio of 4% freeze-dried or oven-dried bioflocs provided higher growth rates and better water quality parameters similar to the control, while the ratio of 16% showed the worst growth performance and water quality in the present study. In addition, body compositions of tilapia fed 4% dried bioflocs showed better nutritional value than tilapia fed 16% dried bioflocs. Protein and energy levels showed an increasing trend with decreasing supplement levels of bioflocs. Moisture content was significantly higher when supplementation of 16% bioflocs was used. Overall, supplementation of 4% freeze-dried or oven-dried bioflocs can be successively included in red hybrid tilapia diets without any effects on growth or body composition and can result in a good quality of culture water for red hybrid tilapia.

scholarly journals Fortified and freeze-dried kiwi fruit (Actinidia deliciosa): quality and sensory assessment

2020 ◽  
Vol 23 ◽  
Author(s):  
Niladri Chakraborty ◽  
Rajat Chakraborty ◽  
Asit Kumar Saha
Keyword(s):  
Moisture Content ◽  
Freeze Drying ◽  
Raw Materials ◽  
Food Product ◽  
Rice Flour ◽  
Actinidia Deliciosa ◽  
Crude Fibre ◽  
Kiwi Fruit ◽  
Drying Time ◽  
Freeze Dried

Abstract Kiwi fruit (Actinidia deliciosa) (KF) is one of the best fruits available due to its large amount of nutrients. Despite its many health benefits, there are no previous reports on its preparation in other readily ingestible forms. The objective of the present study was to make a new food product from KF. The KF pulp was fortified and blended with several raw materials (such as rice flour and oat flour) using a stepwise short time addition and mixing methodology since this avoids unwanted biochemical and chemical reactions. The blended and reduced moisture KF paste was freeze-dried on a round silver coated steel plate (RSCSP), supplying the heat of sublimation using a newly designed cubic heater. The freeze-drying (FD) time was 4.5 h and the drying kinetics were studied using four established models. The effective moisture diffusivity (Deff) during FD (at 50 °C) was 1.532 x 10-6 m2/s and the activation energy (E) estimated for the FD was 28.35 kJ/mol. The freeze-dried sample was ground and placed under vacuum to reduce the weathering effects. The quality of the stored product was evaluated using the proximate analysis, physicochemical analysis and a sensory evaluation using a hedonic scale. The raw, fresh KF had a moisture content of 85.07% and the final freeze-dried product one of 3%. The carbohydrate, total sugar, protein, fat, total ash, crude fibre and vitamin C contents of the final product increased by 563%, 400%, 355%, 386%, 672%, 106%, and 117% respectively. Of the 66 panelists, the % consumer acceptances for the different attributes were: sweetness (68.18%), sourness (90.91%), saltiness (100%), bitterness (100%), flavour (95.45%), texture (77.27%) and overall acceptability (81.82%). Using conventional freeze-drying (CFD) for blended KF pulp without fortification, with the same RSCSP and the same cubic heater for sublimation, the drying time was found to be 7 h to reach the same final moisture content of 3%.

Sign in / Sign up

Export Citation Format

Share Document