scholarly journals Experimental Study on the Influence of Polypropylene Fiber on the Swelling Pressure Expansion Attributes of Silica Fume Stabilized Clayey Soil

Geosciences ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 377 ◽  
Author(s):  
Nitin Tiwari ◽  
Neelima Satyam
Keyword(s):  
Silica Fume ◽  
Clayey Soil ◽  
Polypropylene Fiber ◽  
Expansive Soil ◽  
Swelling Pressure ◽  
Engineering Properties ◽  
Dry Density ◽  
Second Phase ◽  
Polypropylene Fibers ◽  
Maximum Dry Density

Expansive soil shows dual swell–shrink which is not suitable for construction. Several mitigating techniques exist to counteract the problem promulgated by expansive clayey soils. This paper explored the potential mecho-chemical reinforcement of expansive clayey soil to mitigate the effect of upward swelling pressure and heave. The polypropylene fiber is randomly distributed in the soil for mechanical stabilization, and the industrial residual silica fume is used as a chemical stabilizer. The experimental analysis was made in three phases which involved tests on mechanically-reinforced expansive soil, using randomly distributed polypropylene fibers with different percentages (0.25%, 0.50%, and 1.00%), and which were 12 mm length. The second phase of experiments was carried out on chemical stabilized expansive soil with different percentages (2%, 4%, and 8%) of silica, and the next phase of the experiment focused on the combination of mecho-chemical stabilization of the expansive soil with different combinations of silica (i.e., 2%, 4%, and 8%) and polypropylene fibers (i.e., 0.25%, 0.50%, and 1.00%). Maximum dry density (MDD), optimum moisture content (OMC), liquid limit (LL), plastic limit (PL), plastic index (PI), grain size, and constant volume swelling pressure tests were performed on unreinforced and reinforced expansive soil, to investigate the effects of polypropylene fiber and silica fume on the engineering properties of expansive clayey soil. The experimental results illustrate that the inclusion of polypropylene fiber has a significant effect on the upward swelling pressure and expansion property of expansive soil. The reduction in the upward swelling pressure and expansion is a function of fiber content. These results also indicated that the use of silica fume caused a reduction in upward swelling potential, and its effect was considerably more than the influence of fiber.

scholarly journals Experimental Study on the Influence of Polypropylene Fiber on Swelling Pressure – Expansion Attribute of Silica Fume Stabilized Clayey Soil

2019 ◽  
Author(s):  
Nitin Tiwari ◽  
Neelima Satyam
Keyword(s):  
Silica Fume ◽  
Clayey Soil ◽  
Polypropylene Fiber ◽  
Expansive Soil ◽  
Swelling Pressure ◽  
Engineering Properties ◽  
Dry Density ◽  
Second Phase ◽  
Polypropylene Fibers ◽  
Maximum Dry Density

Expansive soil shows dual swell-shrink which is not suitable for the construction. Several mitigating techniques exist to counteract the problem promulgate by expansive clayey soils. This paper explored the penitential mecho-chemical reinforcement of expansive clayey soil to mitigate the effect of upward swelling pressure and heave. The polypropylene fiber is randomly distributed in the soil for mechanical stabilization, and the industrial residual silica fume is used as a chemical stabilizer. The experimental analysis is made in three phases which involved the tests on mechanical reinforced expansive soil using randomly distributed polypropylene fibers with different percentages (0.25%, 0.50%, and 1.00%), and 12mm length. The second phase of experiments carried out on chemical stabilized expansive soil with different percentages (2%, 4% and 8%) of silica and next phase of the experimental focused in the combination of mecho-chemical stabilization of the expansive soil with different combination of silica (i.e., 2%, 4% and 8%) and polypropylene fibers (i.e., 0.25%, 0.50% and 1.00%). Maximum dry density (MDD), optimum moisture content (OMC), liquid limit (LL), plastic limit (PL), plastic index (PI) grain size, and constant volume swelling pressure test were performed on unreinforced and reinforced expansive soil to investigate the effect of polypropylene fiber and silica fume on the engineering properties of expansive clayey soil. The experimental results illustrate that the inclusion of polypropylene fiber has a significant effect on the upward swelling pressure and expansion property of expansive soil. The reduction in the upward swelling pressure and expansion is a function of fiber content. These results also indicated that the use of silica fume caused a reduction in upward swelling potential, and its effect was considerably more than the influence of fiber.

scholarly journals Impact of Silica on Geotechnical Properties of Clayey Soil Present in Edfu- Aswan, Egypt

2021 ◽  
Vol 10 (2) ◽  
pp. 31-37
Author(s):  
Ashraf Ghanem ◽  
Keyword(s):  
Silica Fume ◽  
Clayey Soil ◽  
Liquid Limit ◽  
Engineering Properties ◽  
Dry Density ◽  
Cohesive Soils ◽  
Clayey Soils ◽  
Maximum Dry Density ◽  
Glass Spheres ◽  
A Site

It may be necessary to improve the engineering properties of clayey soils to make them suitable for construction by using some kind of stabilization methods. Treatment with lime, cement or waste materials such as silica fume (SF) has traditionally been used for the stabilization of clayey soils. The soil chosen in this research was extracted from a site in Edfu- Aswan, Egypt. Investigating the effect of properties of cohesive soils when mixed with SF is the main objective of this study. Silica fume is a mineral made up of ultra-fine solid, amorphous silicon dioxide glass spheres (SiO2) from the metallurgical industries company (E.JS.C) in Edfu. A series of laboratory experiments for samples prepared with different percentages were implemented of SF 0%, 2%, 4%, 6%,8%, and 10%. The results show that the blend will increase the maximum dry density of clayey soils. Their Plasticity Index and the liquid limit would increase, the permeability of clayey soil decreases, the unconfined compression strength will increase. All of these results can be summarized to say that the engineering properties of cohesive soils can be improved by combining Silica Fume and clayey soils together.

scholarly journals Modification of Engineering Properties of Clayey Soil by Addition of Mine Waste

2019 ◽  
Vol 8 (12) ◽  
pp. 2343-2347
Keyword(s):  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Clayey Soil ◽  
Mine Waste ◽  
Expansive Soil ◽  
Economic Benefits ◽  
Engineering Properties ◽  
Sustainable Construction ◽  
Dry Density ◽  
Maximum Dry Density

The potential of using iron ore mine waste with an highly compressible clayey soil soil from North Karnataka, India, is investigated in this study. Mining activities lead to the production of waste materials during their extraction and processing stages. The waste maybe in the form of an overburden, waste Rock, Mine Water, or Tailings, depending on the geology, type of processing technology used and the resources mined. The lack of storage space has also been a major concern for the mineral producing agencies, thus paving ways for its better utilization in various construction processes. The collected mine waste was added to expansive soil in different percentages and the mix was tested for Atterberg limits, compaction characteristics, Unconfined compressive strength and California bearing Ratio. It was found that the liquid limit and plasticity index of the soil reduced with addition of mine waste while strength improved. Based on test results of maximum dry density and unconfined compressive strength, a mix of 40% mine waste with 60% expansive clayey soil is recommended for low cost roads. Blending mine waste with expansive soil paves way for sustainable construction besides economic benefits

scholarly journals Investigation on the performance of ‘Fino’ materials to stabilize expansive soil: A case study in Yeka Sub-City, Addis Ababa, Ethiopia

2021 ◽  
Vol 6 (2) ◽  
pp. 044-050
Author(s):  
Tsion Mindaye ◽  
Emer Tucay Quezon ◽  
Temesgen Ayna
Keyword(s):  
Soil Stabilization ◽  
Addis Ababa ◽  
Research Result ◽  
Expansive Soil ◽  
Liquid Limit ◽  
Engineering Properties ◽  
Natural State ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Proctor Test

Expansive soil swells when it is wet, and it will shrink when it dries. Due to this behavior of the soil, the strength and other properties of soil are inferior. To improve its properties, it is necessary to stabilize the soil with different stabilizers. Soil stabilization is a process to treat the soil to maintain, alter, or improve expansive soil performance. In this study, the potential of 'Fino' as stabilizing additive to expansive soil was investigated for the improving engineering properties of expansive soil to be used as subgrade material. The evaluation involved the determination of the Free Swell test, CBR test, Atterberg's limits, and the Proctor test of expansive soil in its natural state as well as when mixed with varying proportions of 'Fino.' The practices were performed on six proportions 5%, 10%, 15%, 20%, 25% and 30 % with expansive soil. The research result indicated a considerable reduction in Swelling, and the Maximum dry Density of soil was improved. Optimum moisture content decreased in increasing 'Fino.' At 30% of 'Fino,' the CBR values of expansive soil increased from 1.06% to 5.94%, Liquid Limit decreased from 95.2% to 29.4%, plasticity index decreased from 57.24% to 17.82% and the degree of expansion of the natural subgrade soil has reduced from "very high to medium." Hence, it is concluded that the 'Fino' at 30% has shown significant improvement in the expansive soil's engineering properties meeting the ERA and AASHTO Standard specifications requirements for road subgrade material.

scholarly journals Enhancement of Expansive Soil with Addition of Wood Husk Ash and Silica Fume

2019 ◽  
Vol 9 (2) ◽  
pp. 320-323
Keyword(s):  
Silica Fume ◽  
Soil Stabilization ◽  
Clay Soil ◽  
Clayey Soil ◽  
Expansive Soils ◽  
Chemical Properties ◽  
Expansive Soil ◽  
Wood Ash ◽  
Engineering Properties ◽  
Experimental Investigations

Soil is the foundation material which supports loads from an overlying structure; it mainly consists of minerals, organic matter, liquids etc. In India the soil most present is Clay, using which the construction of sub grade is deemed problematic. as Clayey soils are expansive soils. The problem of using clayey soil for civil engineering constructions has been observed since early ages.. On the basis of type of soil, soil stabilization is undertaken and is a major technology in construction engineering. Soil strengthening refers to the process of enhancing physical, chemical and mechanical properties of soil to maintain its stability. In this investigation, an attempt has been made to improve the engineering properties of locally available clayey soil near Mahabalipuram by making a composite mix with silica fume and wood ash with equal composition in various proportions. Addition of such materials will increase the physical as well as chemical properties of the soil. study, experimental investigations are carried out to study the beneficial effects of stabilizing Clay soil using silica fume and wood ash with 3%, 5% and 7%. The tests were conducted in order to evaluate the improvement in strength characteristics of the sub graded soil. The parameters tested included the Atterberg limits, Modified Proctor Density, California bearing ratio (CBR). Results showed that the geotechnical parameters of clay soil improved substantially by the addition of wood husk ash and silica fume

scholarly journals Investigation on the performance of ‘Fino’ materials to stabilize expansive soil: A case study in Yeka Sub City, Addis Ababa, Ethiopia

2021 ◽  
Author(s):  
Emer Tucay Quezon ◽  
Tsion Mindaye
Keyword(s):  
Soil Stabilization ◽  
Addis Ababa ◽  
Research Result ◽  
Expansive Soil ◽  
Liquid Limit ◽  
Engineering Properties ◽  
Natural State ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Proctor Test

Expansive soil swells when it is wet, and it will shrink when it dries. Due to this behavior of the soil, the strength and other properties of soil are inferior. To improve its properties, it is necessary to stabilize the soil with different stabilizers. Soil stabilization is a process to treat the soil to maintain, alter, or improve expansive soil performance. In this study, the potential of 'Fino' as stabilizing additive to expansive soil was investigated for the improving engineering properties of expansive soil to be used as subgrade material. The evaluation involved the determination of the Free Swell test, CBR test, Atterberg's limits, and the Proctor test of expansive soil in its natural state as well as when mixed with varying proportions of 'Fino.' The practices were performed on six proportions 5%, 10%, 15%, 20%, 25% and 30 % with expansive soil. The research result indicated a considerable reduction in Swelling, and the Maximum dry Density of soil was improved. Optimum moisture content decreased in increasing 'Fino.' At 30% of 'Fino,' the CBR values of expansive soil increased from 1.06% to 5.94%, Liquid Limit decreased from 95.2% to 29.4%, plasticity index decreased from 57.24% to 17.82% and the degree of expansion of the natural subgrade soil has reduced from "very high to medium." Hence, it is concluded that the 'Fino' at 30% has shown significant improvement in the expansive soil's engineering properties meeting the ERA and AASHTO Standard specifications requirements for road subgrade material.

scholarly journals Effect of Expanded Polystyrene Particle Size on Engineering Properties of Clayey Soil

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Chuanyang Liang ◽  
Yuedong Wu ◽  
Jian Liu ◽  
Huiguo Wu ◽  
Dashuo Chen ◽  
...  
Keyword(s):  
Particle Size ◽  
Clayey Soil ◽  
Expanded Polystyrene ◽  
Engineering Properties ◽  
Dry Density ◽  
Compression Index ◽  
Maximum Dry Density ◽  
Coefficient Of Permeability ◽  
Optimum Water Content ◽  
Size Groups

The particle size of expanded polystyrene (EPS) has an effect on engineering properties of EPS-clay blends. However, the effect of differences between EPS particle size groups subdivided within 1–3 mm on engineering properties is usually ignored. In this study, different particle sizes of EPS pellets have been considered to separately investigate the effect on the optimum water content (OWC), maximum dry density (MDD), unconfined compressive strength (UCS), ductility, coefficient of permeability, and compression index of EPS-clay blends. Results show that the MDD, ductility, hydraulic conductivity, and compression index of EPS-clay blends do not increase with the increase in the EPS particle size in the range of 0.3–3 mm, while the OWC and UCS do not decrease. For a given EPS content, among samples with the EPS particle size of 0.3–1 mm, 1-2 mm, and 2-3 mm, the MDD and UCS of EPS-clay blends with 1-2 mm in EPS particle size are the largest, while the OWC, ductility, coefficient of permeability, and compression index are the smallest. Microstructure analyses reveal that, for samples with the EPS particle size of 1-2 mm, the pore volume is lower and the microstructure is denser, which are the main reasons why the EPS particle size can influence engineering properties of EPS-clay blends.

scholarly journals Estimation of Water Content Curve Using Soil Properties Analysis Data

2019 ◽  
pp. 394-403
Author(s):  
Muhannd Waleed Majeed ◽  
Lubna Mohammed Abd ◽  
Mohammed Nsaif Abbas
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Water Content ◽  
Clayey Soil ◽  
Expansive Soil ◽  
Analysis Data ◽  
Moisture Distribution ◽  
Dry Density ◽  
Natural Ecosystems ◽  
Maximum Dry Density

Soil moisture content is one of the most important ecological factors affecting natural ecosystems. This study deals with the soil moisture distribution and its effect on the different types of soil used such as sandy soil, clayey soil, expansive soil and gypsum soil. Each type is brought to the laboratory to determine the physical properties then prepared for compaction test to determine the maximum dry density and optimum water content and discussed the result by comparing the values with them. The largest value of maximum dry density was for clayey soil while the smallest value was for gypsum soil. The largest optimum moisture content was for expansive soil while the smallest value was for gypsum soil too.

scholarly journals Influence of Waste Marble Dust on the Improvement of Expansive Clay Soils

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Hassan A. M. Abdelkader ◽  
Mohamed M. A. Hussein ◽  
Haiwang Ye
Keyword(s):  
Moisture Content ◽  
Soil Stabilization ◽  
Clayey Soil ◽  
Expansive Soil ◽  
Optimum Moisture Content ◽  
Dry Density ◽  
Expansive Clay ◽  
Maximum Dry Density ◽  
Marble Dust ◽  
Soil Mixtures

The marble process industry from Shaq Al-Thouban region, which is located in East Cairo, Egypt, produces a huge amount of marble wastes every day during the cutting and processing stages. Up to now, most of these wastes are dumping on open land which creates serious environmental problems. The amount of waste marble from the processing stage is about 20 to 25% of the total processed stone. Egypt also suffers from the problem of expansive soil that occupies a large area of its lands, especially in the new cities that are built on these lands. The primary purpose of this study is to use this waste material in the soil stabilization in point of view utilization of this waste as local low-cost materials and elimination of their negative environmental impacts. The waste marble dust was mixed with expansive soil samples with various percentages of 5%, 10%, 15%, 20%, and 25% by dry weight of soil. Different tests including Atterberg’s limits, standard Proctor compaction, unconfined compressive strength (UCS), California bearing ratio (CBR), swelling percentage, linear shrinkage (LS) tests, and XRF and XRD analyses were conducted for natural and marble dust stabilized soils. The soil mixtures used for UCS, CBR, and swell tests were compacted at the optimum moisture content (OMC) and maximum dry density (MDD) using the standard Proctor compaction method and cured for 7 days. The results of the tests showed that there are significant effects in enhancing the properties of expansive soils. Also, the results showed that as the percentage of the marble dust increases the plasticity index, the swelling potential of the expansive clayey soil decreases. Furthermore, the optimum moisture content decreases, and the maximum dry density increases. Also, UCS, CBR, and the calcite content of the soil mixtures increase with the increase in marble dust content.

Effect of the Grain Size of Sand on Expansive Soil

2020 ◽  
Vol 857 ◽  
pp. 367-373
Author(s):  
Yahya K. Atemimi
Keyword(s):  
Expansive Soils ◽  
Soil Mechanics ◽  
Expansive Soil ◽  
Swelling Pressure ◽  
Liquid Limit ◽  
Dry Density ◽  
Sieve Analysis ◽  
Maximum Dry Density ◽  
Sand Mixture ◽  
New Phase

The interest in expansive soils goes as far as they were considered as a new phase of soil mechanics. Problems associated with potential volume change of soils occur worldwide, mainly in the arid and semi-arid climatic region, as is the case of the country of this research. These problems are particularly existed in regions where the variation in the moisture content can cause a potential expansiveness of the soil. In fact, Bentonite/Sand mixture represents one of the available answers for the geotechnical engineering problems such as heaves, cracks and other damages caused by swelling and shrinkage. This mixture may be used to 1) reduce the settlement time of structures, and 2) increase the permeability of soils. The main target of the present work is to demonstrate the influence of adding sand on an expansive soil (bentonite) behavior. This includes an investigation to the effect of the amount and the particles size of sand on the physical properties of the expansive soil. The reduction in swelling and swelling pressure of the expansive soil by the addition of different percentages and different particles size of sand and the consequent effect on strength characteristic were also studied. Thirteen samples of Bentonite/sand mixture were used in this study to evaluate the effect of the sand percentages on the swelling behavior. To implement the laboratory program, many tests were used which were sieve analysis, Atterberg’s limits, compaction, and free swelling test with swelling pressure test. The results indicated a reduction in the liquid limit of around 55% and in the plastic limit of around 54%, where the increase in the maximum dry density was 46%. On the other hand, the reduction in the swelling pressure was 87.5%.

Sign in / Sign up

Export Citation Format

Share Document