scholarly journals Effect of Non-Coal Heating and Traditional Heating on Indoor Environment of Rural Houses in Tianjin

2018 ◽  
Vol 16 (1) ◽  
pp. 77 ◽  
Author(s):  
Liansheng Liu ◽  
Hua Yang ◽  
Runze Duan ◽  
Minghai Liu ◽  
Ruifang Zhang ◽  
...  
Keyword(s):  
Air Quality ◽  
Natural Gas ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Indoor Environment ◽  
Ventilation Rate ◽  
Pollutant Emission ◽  
Coal Fire ◽  
Indoor Pollutant ◽  
Total Volatile Organic Compounds

In order to understand the effect of the non-coal heating and the traditional coal-fired heating on the indoor environment of the rural houses, the humidity environment and indoor air quality in several households were investigated during the heating period in Beichen District and Wuqing District of Tianjin, China. The results showed that the indoor average temperature for the heating by the electricity and the natural gas was higher than that by the traditional coal fire. The indoor relative humidity for the heating by the electricity and the natural gas was lower than that by the traditional coal fire. The indoor air quality (IAQ) for the heating by the electricity and the natural gas was better than that by the traditional coal fire. For traditional coal-fire heating households, the indoor pollutant emission (CO emission) by using the clean coal was lower than that by using the raw coal. The indoor ventilation rate which was an important parameter for the indoor air quality was generally poor in winter. The total volatile organic compounds (TVOC) emission in the indoors of the coal-fired heating households was generally higher than that of the non-coaled heating households.

Computational Modeling of Particulate Pollutant Transport in a Ventilated Room in the Presence of Two Heated Breathing and Rotating Manikins

2017 ◽  
Author(s):  
Seyed Ali Keshavarz ◽  
Mazyar Salmanzadeh ◽  
Goodarz Ahmadi
Keyword(s):  
Air Quality ◽  
Computational Modeling ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Rotational Motion ◽  
Indoor Environment ◽  
Ventilation System ◽  
Thermal Plume ◽  
Displacement Ventilation ◽  
Simulation Results

Recently, attention has been given to indoor air quality due to its serious health concerns. Clearly the dispersion of pollutant is directly affected by the airflow patterns. The airflow in indoor environment is the results of a combination of several factors. In the present study, the effects of thermal plume and respiration on the indoor air quality in a ventilated cubicle were investigated using an unsteady computational modeling approach. The person-to-person contaminant transports in a ventilated room with mixing and displacement ventilation systems were studied. The effects of rotational motion of the heated manikins were also analyzed. Simulation results showed that in the cases which rotational motion was included, the human thermal plume and associated particle transport were significantly distorted. The distortion was more noticeable for the displacement ventilation system. Also it was found that the displacement ventilation system lowered the risk of person-to-person transmission in an office space in comparison with the mixing ventilation system. On the other hand the mixing system was shown to be more effective compared to the displacement ventilation in removing the particles and pollutant that entered the room through the inlet air diffuser.

scholarly journals Remote Work and the Environment: Exploratory Analysis of Indoor Air Quality of Commercial Offices and the Home Office

2021 ◽  
Author(s):  
Kamrie Sarnosky ◽  
Mark Benden ◽  
Leslie Cizmas ◽  
Annette Regan ◽  
Garett Sansom
Keyword(s):  
Air Quality ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Indoor Air Pollution ◽  
Home Office ◽  
Adverse Health Effects ◽  
Home Based ◽  
Increased Risk ◽  
Carbon Dioxide Co2 ◽  
Total Volatile Organic Compounds

Abstract Background: The COVID-19 pandemic has accelerated an already existing trend of individuals increasingly working remotely. With the growing popularity of remote working, specifically in a home office, there is a critical need to better understand and characterize the potential environmental differences between these two spaces. Indoor air pollution can have adverse health effects and impair cognitive functioning. Methods: This small pilot cohort study (N=22) recruited home and office workers to better understand the indoor air quality between these spaces. Air contaminants collected and assessed included PM10 and PM2.5, carbon dioxide (CO2), and total volatile organic compounds (TVOCs). Results: Findings showed a strong statistically significant increase in all measured variables within homes in comparison to traditional offices (p<0.001). For instance, The mean PM2.5 level in the traditional office space was 1.93 µg/m3 whereas it was more than twice this amount (5.97 µg/m3) in home offices.Conclusion: These results indicate that those who work from home are at increased risk due to longer exposures to higher levels of certain contaminants, the importance to better develop interventions to mitigate this reality is underscored by the fact that many workers will be moving to home-based offices in the coming years.

scholarly journals Mitigation Strategies for Overheating and High Carbon Dioxide Concentration within Institutional Buildings: A Case Study in Toronto, Canada

Buildings ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 124 ◽  
Author(s):  
Claire Tam ◽  
Yuqing Zhao ◽  
Zaiyi Liao ◽  
Lian Zhao
Keyword(s):  
Carbon Dioxide ◽  
Air Quality ◽  
Indoor Air Quality ◽  
Air Temperature ◽  
Indoor Air ◽  
Indoor Environment ◽  
Thermal Conditions ◽  
Co2 Concentration ◽  
Hvac System

Indoor air quality and thermal conditions are important considerations when designing indoor spaces to ensure occupant health, satisfaction, and productivity. Carbon dioxide (CO2) concentration and indoor air temperature are two measurable parameters to assess air quality and thermal conditions within a space. Occupants are progressively affected by the indoor environment as the time spent indoors prolongs. Specifically, there is an interest in carrying out investigations on the indoor environment through surveying existing Heating, Ventilation, Air Conditioning (HVAC) system operations in classrooms. Indoor air temperature and CO2 concentration in multiple lecture halls in Toronto, Canada were monitored; observations consistently show high indoor air temperature (overheating) and high CO2 concentration. One classroom is chosen as a representative case study for this paper. The results verify a strong correlation between the number of occupants and the increase in air temperature and CO2 concentration. Building Energy Simulation (BES) is used to investigate the causes of discomfort in the classroom, and to identify methods for regulating the temperature and CO2 concentration. This paper proposes retro-commissioning strategies that could be implemented in institutional buildings; specifically, the increase of outdoor airflow rate and the addition of occupancy-based pre-active HVAC system control. The proposed retrofit cases reduce the measured overheating in the classrooms by 2-3 °C (indoor temperature should be below 23 °C) and maintain CO2 concentration under 900 ppm (the CO2 threshold is 1000 ppm), showing promising improvements to a classroom’s thermal condition and indoor air quality.

scholarly journals Revised Finnish classification of indoor climate 2018

2019 ◽  
Vol 111 ◽  
pp. 02017 ◽  
Author(s):  
Mervi Ahola ◽  
Jorma Säteri ◽  
Laura Sariola
Keyword(s):  
Air Quality ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Indoor Environment ◽  
Building Materials ◽  
Fine Particles ◽  
Indoor Climate ◽  
Environmental Classification ◽  
Target Values

The Finnish Society of Indoor Air Quality and Climate (FiSIAQ) introduced a Classification of Indoor Climate, Construction Cleanliness, and Finishing Materials in 1995. The Classification of Indoor Climate has been revised to meet the new Decree on indoor air quality and ventilation, European standards and experience from users of the classification. The most significant change is that target values for concentration and the in/out ratio of fine particles have been added. Other adjustments have been made to ensure good indoor environment and energy efficiency, but with reasonable investments. The criteria for emissions from building material and furniture were also updated. The Building Information Foundation RTS sr has run the M1-labelling of building products since 1996. The voluntary approach has been proven to improve the IAQ in new buildings and to reduce emissions from building materials. The Classification of Indoor Environment 2018 is integrated part of the new RTS Environmental Classification system.

scholarly journals INVESTIGATING INDOOR AIR QUALITY AND THERMAL COMFORT USING DIFFERENT VENTILATION SYSTEMS UNDER IRAQI CLIMATE

2018 ◽  
Vol 18 (3) ◽  
pp. 422-435
Author(s):  
Ala'a A Mahdi ◽  
Sara Abbas
Keyword(s):  
Air Quality ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Indoor Environment ◽  
Simulation Models ◽  
Air Distribution ◽  
Airflow Rate ◽  
Computational Fluid Dynamics Cfd ◽  
Occupied Zone ◽  
Ventilation Systems

Computational Fluid Dynamics (CFD) of indoor environment as well as qualityconsiderations are important element in the study of energy consumption, thermal comfortand indoor air quality in buildings. This paper investigate a comparison work betweenimpinging jet, displacement, and mixing ventilation systems for an isothermal and nonisothermalventilated room for Indoor Air Quality (IAQ) and thermal human comfort underIraqi climate. For IJV system, draught discomfort is the issue of most concern since itsupplies cooled air directly to the occupied zone. This study investigated a number of factorsinfluencing draught discomfort and temperature stratification in an office environment. Theconsidered factors, supply airflow rate and supply air temperature. RNG K-? turbulencemodel was used with the turbulent flow. The second aspect included numerical analyses byadopting ANSYS FLUENT15 code to generate simulation models. A square shaped airsupply device was used with [0.1 times room height (h)] outlet terminal height from the footlevel end. The IJV system proved more efficient than displacement and mixing ventilationsystems. The Air Distribution Performance Index (ADPI) obtained for an isothermal andnon-isothermal ventilated room adopting IJV system gave best values (0.80, 0.83)respectively compared with the other two ventilation systems.

Sign in / Sign up

Export Citation Format

Share Document