scholarly journals Lard Injection Matrix for Serial Crystallography

2020 ◽  
Vol 21 (17) ◽  
pp. 5977
Author(s):  
Ki Hyun Nam
Keyword(s):  
Flow Rate ◽  
Room Temperature ◽  
Glucose Isomerase ◽  
Viscous Medium ◽  
Cubic Phase ◽  
Time Resolved ◽  
Crystal Sample ◽  
X Ray ◽  
Serial Crystallography ◽  
Delivery Medium

Serial crystallography (SX) using X-ray free electron laser or synchrotron X-ray allows for the determination of structures, at room temperature, with reduced radiation damage. Moreover, it allows for the study of structural dynamics of macromolecules using a time-resolved pump-probe, as well as mix-and-inject experiments. Delivering a crystal sample using a viscous medium decreases sample consumption by lowering the flow rate while being extruded from the injector or syringe as compared to a liquid jet injector. Since the environment of crystal samples varies, continuous development of the delivery medium is important for extended SX applications. Herein, I report the preparation and characterization of a lard-based sample delivery medium for SX. This material was obtained using heat treatment, and then the soluble impurities were removed through phase separation. The lard injection medium was highly stable and could be injected via a syringe needle extruded at room temperature with a flow rate < 200 nL/min. Serial millisecond crystallography experiments were performed using lard, and the room temperature structures of lysozyme and glucose isomerase embedded in lard at 1.75 and 1.80 Å, respectively, were determined. The lard medium showed X-ray background scattering similar or relatively lower than shortenings and lipidic cubic phase; therefore, it can be used as sample delivery medium in SX experiments.

Stable sample delivery in viscous media via a capillary for serial crystallography

2020 ◽  
Vol 53 (1) ◽  
pp. 45-50 ◽  
Author(s):  
Ki Hyun Nam
Keyword(s):  
Room Temperature ◽  
Capillary Tube ◽  
Glucose Isomerase ◽  
Low Flow ◽  
Innovative Technology ◽  
Delivery Method ◽  
Crystal Sample ◽  
X Ray ◽  
Serial Crystallography ◽  
Delivery Medium

Serial crystallography (SX) is an innovative technology in structural biology that enables the visualization of the molecular dynamics of macromolecules at room temperature. SX experiments always require a considerable amount of effort to deliver a crystal sample to the X-ray interaction point continuously and reliably. Here, a sample-delivery method using a capillary and a delivery medium is introduced. The crystals embedded in the delivery medium can pass through the capillary tube, which is aligned with the X-ray beam, at very low flow rates without requiring elaborate delivery techniques, drastically reducing sample consumption. In serial millisecond crystallography using a viscous medium via a capillary, crystals of lysozyme embedded in agarose, which produce an unstable injection stream at atmospheric pressure, and crystals of glucose isomerase embedded in gelatin, which is known to be problematic for open-extruder operation, were stably delivered at a flow rate of 100 nl min−1. The room-temperature crystal structures of lysozyme and glucose isomerase were successfully determined at 1.85 and 1.70 Å resolutions, respectively. This simple but highly efficient sample-delivery method can allow researchers to deliver crystals precisely to an X-ray beam in SX experiments.

scholarly journals Shortening injection matrix for serial crystallography

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Ki Hyun Nam
Keyword(s):  
Crystal Structures ◽  
Room Temperature ◽  
Low Cost ◽  
Glucose Isomerase ◽  
Low Flow ◽  
Cubic Phase ◽  
Interaction Point ◽  
X Ray ◽  
Serial Crystallography ◽  
Delivery Medium

AbstractSerial crystallography allows crystal structures to be determined at room temperature through the steady delivery of crystals to the X-ray interaction point. Viscous delivery media are advantageous because they afford efficient sample delivery from an injector or syringe at a low flow rate. Hydrophobic delivery media, such as lipidic cubic phase (LCP) or grease, provide a stable injection stream and are widely used. The development of new hydrophobic delivery materials can expand opportunities for future SX studies with various samples. Here, I introduce fat-based shortening as a delivery medium for SX experiments. This material is commercially available at low cost and is straightforward to handle because its phase (i.e., solid or liquid) can be controlled by temperature. Shortening was extruded from a syringe needle in a stable injection stream even below 200 nl/min. X-ray exposed shortening produced several background scattering rings, which have similar or lower intensities than those of LCP and contribute negligibly to data processing. Serial millisecond crystallography was performed using two shortening delivery media, and the room temperature crystal structures of lysozyme and glucose isomerase were successfully determined at resolutions of 1.5–2.0 Å. Therefore, shortening can be used as a sample delivery medium in SX experiments.

scholarly journals Shortening injection matrix for serial crystallography

2019 ◽  
Author(s):  
Ki Hyun Nam
Keyword(s):  
Crystal Structures ◽  
Room Temperature ◽  
Low Cost ◽  
Glucose Isomerase ◽  
Low Flow ◽  
Cubic Phase ◽  
Interaction Point ◽  
X Ray ◽  
Serial Crystallography ◽  
Delivery Medium

AbstractSerial crystallography (SX) allows crystal structures to be observed at room temperature through the steady delivery of crystals to the X-ray interaction point. Viscous delivery media are advantageous because they afford efficient sample delivery from an injector or syringe at a low flow rate. Hydrophobic delivery media, such as lipidic cubic phase (LCP) or grease, provide a very stable injection stream and are widely used. The development of new hydrophobic delivery materials can expand opportunities for future SX studies with various samples. Here, I introduce fat-based shortening as a delivery medium for SX experiments. This material is commercially available at low cost and is straightforward to handle because its phase (i.e., solid or liquid) can be controlled by temperature. Shortening was extruded from a syringe needle in a very stable injection stream even below 200 nl/min. X-ray exposed shortening produced several background scattering rings, which have similar or lower intensities than those of LCP and contribute negligibly to data processing. Serial millisecond crystallography was performed using two shortening delivery media, and the room temperature crystal structures of lysozyme and glucose isomerase were successfully determined at resolutions of 1.5–2.0 Å. Therefore, shortening can be used as a sample delivery medium in SX experiments.

Sample delivery using viscous media, a syringe and a syringe pump for serial crystallography

2019 ◽  
Vol 26 (5) ◽  
pp. 1815-1819 ◽  
Author(s):  
Suk-Youl Park ◽  
Ki Hyun Nam
Keyword(s):  
Crystal Structures ◽  
Room Temperature ◽  
Viscous Medium ◽  
Cubic Phase ◽  
Syringe Pump ◽  
Beam Position ◽  
Crystal Sample ◽  
Injector Nozzle ◽  
Viscous Media ◽  
Serial Crystallography

Sample delivery using injectors is widely used in serial crystallography (SX) and has significantly contributed to the determination of crystal structures at room temperature. However, sophisticated injector nozzle fabrication methods and sample delivery operations have made it difficult for ordinary users to access the SX research. Herein, a simple and easily accessible sample delivery method for SX experiments is introduced, that uses a viscous medium, commercially available syringe and syringe pump. The syringe containing the lysozyme crystals embedded in lipidic cubic phase (LCP) or polyacrylamide (PAM) delivery media was connected to a needle having an inner diameter of 168 µm, after which it was installed on a syringe pump. By driving the syringe pump, the syringe plunger was pushed and the crystal sample was delivered to the X-ray beam position in a stable manner. Using this system, the room-temperature crystal structures of lysozyme embedded in LCP and PAM at 1.56 Å and 1.75 Å, respectively, were determined. This straightforward syringe pump-based sample delivery system can be utilized in SX.

scholarly journals Polysaccharide-Based Injection Matrix for Serial Crystallography

2020 ◽  
Vol 21 (9) ◽  
pp. 3332 ◽  
Author(s):  
Ki Hyun Nam
Keyword(s):  
Room Temperature ◽  
Glucose Isomerase ◽  
Viscous Medium ◽  
Specific Protein ◽  
Wheat Starch ◽  
X Ray ◽  
Crystallization Solution ◽  
Serial Crystallography ◽  
X Ray Background

Serial crystallography (SX) provides an opportunity to observe the molecular dynamics of macromolecular structures at room temperature via pump-probe studies. The delivery of crystals embedded in a viscous medium via an injector or syringe is widely performed in synchrotrons or X-ray free-electron laser facilities with low repetition rates. Various viscous media have been developed; however, there are cases in which the delivery material undesirably interacts chemically or biologically with specific protein samples, or changes the stability of the injection stream, depending on the crystallization solution. Therefore, continued discovery and characterization of new delivery media is necessary for expanding future SX applications. Here, the preparation and characterization of new polysaccharide (wheat starch (WS) and alginate)-based sample delivery media are introduced for SX. Crystals embedded in a WS or alginate injection medium showed a stable injection stream at a flow rate of < 200 nL/min and low-level X-ray background scattering similar to other hydrogels. Using these media, serial millisecond crystallography (SMX) was performed, and the room temperature crystal structures of glucose isomerase and lysozyme were determined at 1.9–2.0 Å resolutions. WS and alginate will allow an expanded application of sample delivery media in SX experiments.

Stable sample delivery in a viscous medium via a polyimide-based single-channel microfluidic chip for serial crystallography

2021 ◽  
Vol 54 (4) ◽  
Author(s):  
Ki Hyun Nam ◽  
Yunje Cho
Keyword(s):  
Crystal Structures ◽  
Flow Rate ◽  
Microfluidic Chip ◽  
Room Temperature ◽  
Single Channel ◽  
Viscous Medium ◽  
X Rays ◽  
Interaction Point ◽  
X Ray ◽  
Serial Crystallography

Serial crystallography (SX) provides room-temperature crystal structures with minimal radiation damage and facilitates the comprehension of molecular dynamics through time-resolved studies. In SX experiments, it is important to deliver a large number of crystal samples to the X-ray interaction point in a serial and stable manner. The advantage of crystal delivery in a viscous medium via a capillary is the ability to deliver all of the crystal samples to the X-ray interaction point at a low flow rate; however, the capillary often breaks during handling and high X-ray absorption can occur at low energy states. This study aimed to develop a stable system for sample delivery in a viscous medium via a polyimide-based single-channel microfluidic (PSM) chip for SX. Since this microfluidic chip comprises a polyimide film, it has high tensile strength and higher X-ray transmittance than a quartz capillary. The PSM chip was connected to a syringe containing the microcrystals embedded in viscous medium. The channel of the PSM chip was aligned to the X-ray path, and the viscous medium containing lysozyme crystals was stably delivered using a syringe pump at a flow rate of 100 nl min−1. Room-temperature lysozyme crystal structures were successfully determined at 1.85 Å resolution. This method would greatly facilitate sample delivery for SX experiments using synchrotron X-rays.

scholarly journals Beef tallow injection matrix for serial crystallography

2022 ◽  
Vol 12 (1) ◽  
Author(s):  
Ki Hyun Nam
Keyword(s):  
Beef Tallow ◽  
Room Temperature ◽  
Heat Treating ◽  
Glucose Isomerase ◽  
Viscous Medium ◽  
Low Flow ◽  
Interaction Point ◽  
Time Resolved ◽  
Experimental Environment ◽  
Serial Crystallography

AbstractSerial crystallography (SX) enables the visualization of the time-resolved molecular dynamics of macromolecular structures at room temperature while minimizing radiation damage. In SX experiments, the delivery of a large number of crystals into an X-ray interaction point in a serial and stable manner is key. Sample delivery using viscous medium maintains the stable injection stream at low flow rates, markedly reducing sample consumption compared with that of a liquid jet injector and is widely applied in SX experiments with low repetition rates. As the sample properties and experimental environment can affect the stability of the injection stream of a viscous medium, it is important to develop sample delivery media with various characteristics to optimize the experimental environment. In this study, a beef tallow injection matrix possessing a higher melting temperature than previously reported fat-based shortening and lard media was introduced as a sample delivery medium and applied to SX. Beef tallow was prepared by heat treating fats from cattle, followed by the removal of soluble impurities from the extract by phase separation. Beef tallow exhibited a very stable injection stream at room temperature and a flow rate of < 10 nL/min. The room-temperature structures of lysozyme and glucose isomerase embedded in beef tallow were successfully determined at 1.55 and 1.60 Å, respectively. The background scattering of beef tallow was higher than that of previously reported fat-based shortening and lard media but negligible for data processing. In conclusion, the beef tallow matrix can be employed for sample delivery in SX experiments conducted at temperatures exceeding room temperature.

scholarly journals Approach of Serial Crystallography

Crystals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 854
Author(s):  
Ki Hyun Nam
Keyword(s):  
Radiation Damage ◽  
Room Temperature ◽  
Time Resolved ◽  
X Ray ◽  
X Ray Crystallography ◽  
The Past ◽  
Wide Range ◽  
Experimental Limitation ◽  
Serial Crystallography ◽  
Collection Strategies

Radiation damage and cryogenic sample environment are an experimental limitation observed in the traditional X-ray crystallography technique. However, the serial crystallography (SX) technique not only helps to determine structures at room temperature with minimal radiation damage, but it is also a useful tool for profound understanding of macromolecules. Moreover, it is a new tool for time-resolved studies. Over the past 10 years, various sample delivery techniques and data collection strategies have been developed in the SX field. It also has a wide range of applications in instruments ranging from the X-ray free electron laser (XFEL) facility to synchrotrons. The importance of the various approaches in terms of the experimental techniques and a brief review of the research carried out in the field of SX has been highlighted in this editorial.

scholarly journals Viscous hydrophilic injection matrices for serial crystallography

IUCrJ ◽  
2017 ◽  
Vol 4 (4) ◽  
pp. 400-410 ◽  
Author(s):  
Gabriela Kovácsová ◽  
Marie Luise Grünbein ◽  
Marco Kloos ◽  
Thomas R. M. Barends ◽  
Ramona Schlesinger ◽  
...  
Keyword(s):  
Protein Crystallization ◽  
High Viscosity ◽  
Stream Velocity ◽  
Cubic Phase ◽  
Time Resolved ◽  
Flow Rates ◽  
Block Polymer ◽  
X Ray ◽  
Crystallization Conditions ◽  
Serial Crystallography

Serial (femtosecond) crystallography at synchrotron and X-ray free-electron laser (XFEL) sources distributes the absorbed radiation dose over all crystals used for data collection and therefore allows measurement of radiation damage prone systems, including the use of microcrystals for room-temperature measurements. Serial crystallography relies on fast and efficient exchange of crystals upon X-ray exposure, which can be achieved using a variety of methods, including various injection techniques. The latter vary significantly in their flow rates – gas dynamic virtual nozzle based injectors provide very thin fast-flowing jets, whereas high-viscosity extrusion injectors produce much thicker streams with flow rates two to three orders of magnitude lower. High-viscosity extrusion results in much lower sample consumption, as its sample delivery speed is commensurate both with typical XFEL repetition rates and with data acquisition rates at synchrotron sources. An obvious viscous injection medium is lipidic cubic phase (LCP) as it is used forin mesomembrane protein crystallization. However, LCP has limited compatibility with many crystallization conditions. While a few other viscous media have been described in the literature, there is an ongoing need to identify additional injection media for crystal embedding. Critical attributes are reliable injection properties and a broad chemical compatibility to accommodate samples as heterogeneous and sensitive as protein crystals. Here, the use of two novel hydrogels as viscous injection matrices is described, namely sodium carboxymethyl cellulose and the thermo-reversible block polymer Pluronic F-127. Both are compatible with various crystallization conditions and yield acceptable X-ray background. The stability and velocity of the extruded stream were also analysed and the dependence of the stream velocity on the flow rate was measured. In contrast with previously characterized injection media, both new matrices afford very stable adjustable streams suitable for time-resolved measurements.

scholarly journals Sample delivery using capillary and delivery medium for serial crystallography

2019 ◽  
Author(s):  
Ki Hyun Nam
Keyword(s):  
Capillary Tube ◽  
Low Flow ◽  
Innovative Technology ◽  
X Rays ◽  
Delivery Method ◽  
Interaction Point ◽  
Crystal Sample ◽  
X Ray ◽  
Serial Crystallography ◽  
Delivery Medium

AbstractSerial crystallography (SX) is an innovative technology in structural biology that enables the visualization of molecular dynamics of macromolecules at room temperature. SX experiments always require a considerable amount of effort to deliver a crystal sample to the X-ray interaction point continuously and reliably. Here, a sample delivery method using a capillary and a delivery medium is introduced. The crystals embedded in the delivery medium can pass through the capillary tube, which is aligned with the X-ray beam, at very low flow rates without requiring elaborate delivery techniques and drastically reducing sample consumption. This simple but highly efficient sample delivery method can allow researchers to deliver crystals precisely to X-rays in SX experiments.

Sign in / Sign up

Export Citation Format

Share Document