scholarly journals Soft Template Electropolymerization of Polypyrrole for Improved pH-Induced Drug Delivery

2020 ◽  
Vol 21 (21) ◽  
pp. 8114
Author(s):  
Iryna Liubchak ◽  
Matthew T. Lawrence ◽  
F. Benjamin Holness ◽  
Aaron D. Price
Keyword(s):  
Drug Delivery ◽  
Chronic Wounds ◽  
Uv Spectroscopy ◽  
Drug Loading ◽  
Hydrogen Gas ◽  
Soft Template ◽  
Release Mechanism ◽  
Ph Change ◽  
Polymer Medium

Chronic wounds are characterized by a localized pH change from acidic (healthy) to alkaline (unhealthy), which can be harnessed to act as a switch for drug release from a polymer medium covering the wound for improved healing. To realize this, a new polymer dressing material is needed to help heal chronic wounds. Polypyrrole (PPy) is a biocompatible electroactive polymer that has been proven as a successful drug delivery mechanism, but currently lacks the capacity for scalable clinical applications due to its poor processability. In this study, PPy films with and without microstructures were produced using electrochemical oxidation and subsequently doped with fluorescein, a model drug molecule. To increase the drug loading capacity, microstructures were created through soft template polymerization of pyrrole around hydrogen gas bubbles. Fluorescein release was measured using UV spectroscopy over a pH range of 2 to 11, showing increased release at higher pH values. Microstructured films showed an increased doping capacity compared to flat PPy films, attributed to the increase in drug incorporation sites. The pH-activated release mechanism was shown to be successful and can be applied as a pH-sensitive biosensor and drug delivery system in vitro.

scholarly journals Formulation and In-Vitro Evaluation of Niosomal drug Delivery in Cancer Chemotherapy

2017 ◽  
Vol 5 (04) ◽  
pp. 29-33
Author(s):  
Naresh Kalra ◽  
G. Jeyabalan
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Delivery System ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
The Body ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Ethanol Injection

Drug delivery systems are defined as formulations aim for transportation of a drug to the desired area of action within the body. The aim of the study was to investigate the feasibility of using Niosomes as a drug delivery system for Cisplatin By entrapment of drug in Niosomes, dose also could be reduced. Niosomes were prepared by Ethanol injection method using cholesterol and Surfactant. Particle size, zeta potential, entrapment efficiency and in vitro drug release studies were performed. The targeted niosome delivery system is composed of drug, surfactant and cholesterol. With regard to the influence of formulation variables on the percent drug loading (PDL), different compositions with varying ratios of surfactant and cholesterol were studied. In –Vitro drug release mechanism was studied for 24 hours.

Chitosan-based Polymer Matrix for Pharmaceutical Excipients and Drug Delivery

2019 ◽  
Vol 26 (14) ◽  
pp. 2502-2513 ◽  
Author(s):  
Md. Iqbal Hassan Khan ◽  
Xingye An ◽  
Lei Dai ◽  
Hailong Li ◽  
Avik Khan ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Drug Carrier ◽  
Drug Loading ◽  
Delivery Systems ◽  
Cancer Drug ◽  
Release Mechanism ◽  
Innovative Drug ◽  
Pharmaceutical Excipients ◽  
Weight Variation

The development of innovative drug delivery systems, versatile to different drug characteristics with better effectiveness and safety, has always been in high demand. Chitosan, an aminopolysaccharide, derived from natural chitin biomass, has received much attention as one of the emerging pharmaceutical excipients and drug delivery entities. Chitosan and its derivatives can be used for direct compression tablets, as disintegrant for controlled release or for improving dissolution. Chitosan has been reported for use in drug delivery system to produce drugs with enhanced muco-adhesiveness, permeation, absorption and bioavailability. Due to filmogenic and ionic properties of chitosan and its derivative(s), drug release mechanism using microsphere technology in hydrogel formulation is particularly relevant to pharmaceutical product development. This review highlights the suitability and future of chitosan in drug delivery with special attention to drug loading and release from chitosan based hydrogels. Extensive studies on the favorable non-toxicity, biocompatibility, biodegradability, solubility and molecular weight variation have made this polymer an attractive candidate for developing novel drug delivery systems including various advanced therapeutic applications such as gene delivery, DNA based drugs, organ specific drug carrier, cancer drug carrier, etc.

Minocycline hydrochloride loaded mPEG-PCLA membranes: Preparation and in vitro evaluation for periodontitis therapy

2021 ◽  
pp. 088391152199279
Author(s):  
Ningtao Wang ◽  
Zhengmei Huang ◽  
Shenchun Wang ◽  
Meidong Lang ◽  
Xiuyin Zhang
Keyword(s):  
Drug Delivery ◽  
Drug Loading ◽  
Membrane Surface ◽  
Local Treatment ◽  
In Vitro Release ◽  
Periodontal Pathogen ◽  
Antibacterial Drug ◽  
Periodontal Ligament Fibroblasts ◽  
Minocycline Hydrochloride

This study was aimed at alleviating shortcomings in the treatment of periodontitis by preparation of a biopolymer membrane loaded with minocycline hydrochloride (MH) inserted into periodontal pockets to treat infections. Monomethoxy-poly (ethylene glycol)-poly (ε-caprolactone-co-L-lactide) (mPEG-PCLA) is a biocompatible and biodegradable amphiphilic block copolymer. It, therefore, has attracted considerable attention in drug delivery systems and periodontal treatment. We chose it as a membrane material for MH-drug loading. The MH-loaded membranes were prepared by the solvent casting technique with the content of 5, 8 and 10 wt.%, respectively. Fourier transform infrared spectra (FTIR) revealed no interaction between MH and polymer. The drug-loaded membrane surface morphology was investigated by scanning electron microscopy (SEM). In vitro release studies showed that the initial drug release exceeded 40% within 24 h, followed by a sustained release for up to 2 weeks, which would enable the therapeutic level to maintain over a longer time. The antibacterial activity studies in vitro demonstrated a positive effect on the periodontal pathogen. MH drug-loaded membranes have no adverse effect on the growth of periodontal ligament fibroblasts in the MTT test. The study suggests that mPEG-PCLA membranes containing MH are a potential antibacterial drug delivery system for local treatment of periodontitis.

scholarly journals Chitosan/poly(lactic-co-glycolic)acid Nanoparticle Formulations with Finely-Tuned Size Distributions for Enhanced Mucoadhesion

Pharmaceutics ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 95
Author(s):  
Feipeng Yang ◽  
Maleen Cabe ◽  
Hope A. Nowak ◽  
Kelly A. Langert
Keyword(s):  
Drug Delivery ◽  
Aqueous Phase ◽  
Glycolic Acid ◽  
Drug Loading ◽  
Delivery Systems ◽  
Intranasal Delivery ◽  
Brain Drug Delivery ◽  
Size Groups ◽  
Formulation Parameters

Non-parenteral drug delivery systems using biomaterials have advantages over traditional parenteral strategies. For ocular and intranasal delivery, nanoparticulate systems must bind to and permeate through mucosal epithelium and other biological barriers. The incorporation of mucoadhesive and permeation-enhancing biomaterials such as chitosan facilitate this, but tend to increase the size and polydispersity of the nanoparticles, making practical optimization and implementation of mucoadhesive nanoparticle formulations a challenge. In this study, we adjusted key poly(lactic-co-glycolic) acid (PLGA) nanoparticle formulation parameters including the organic solvent and co-solvent, the concentration of polymer in the organic phase, the composition of the aqueous phase, the sonication amplitude, and the inclusion of chitosan in the aqueous phase. By doing so, we prepared four statistically unique size groups of PLGA NPs and equally-sized chitosan-PLGA NP counterparts. We loaded simvastatin, a candidate for novel ocular and intranasal delivery systems, into the nanoparticles to investigate the effects of size and surface modification on drug loading and release, and we quantified size- and surface-dependent changes in mucoadhesion in vitro. These methods and findings will contribute to the advancement of mucoadhesive nanoformulations for ocular and nose-to-brain drug delivery.

scholarly journals Development and characterization of phytosterol nanoemulsions and self-microemulsifying drug delivery systems

2019 ◽  
Author(s):  
Yuan Chuanxun ◽  
Zhang Xueru ◽  
Jin Risheng
Keyword(s):  
Drug Delivery ◽  
Delivery System ◽  
Drug Loading ◽  
In Vitro Release ◽  
Pharmacokinetic Analysis ◽  
Polyethylene Glycol 400 ◽  
Hydrogenated Castor Oil ◽  
Release Curve ◽  
Tween 60

AbstractThe aim of this study is to develop a self microemulsion drug delivery system for phytosterols to improve the solubility and bioavailability. The results showed that the formulation of phytosterol self-microemulsion is: lemon essential oil in oil phase, polyoxyethylene hydrogenated castor oil 40 and Tween 60 in emulsifier, polyethylene glycol 400 in co-emulsifier, Km = 7:3, Kp = 3:1, Ke = 50%. The drug loading of phytosterol self-microemulsion prepared by this method was 87.22 mg/g, encapsulation efficiency was 89.65%, particle size was 48.85nm, potential was −12.863mV. In vitro release experiment showed that the release of phytosterols in microemulsion was more than 90%, and the release curve was in accordance with the first-order kinetics equation. The pharmacokinetic analysis of PSSM synthesized by this method shows that PSSM can increase the bioavailability of PS more than three times, so it is necessary to do more in-depth research on the self-microemulsion delivery system of phytosterols.

scholarly journals FORMULATION, OPTIMIZATION AND IN VITRO EVALUATION OF 5-FLUOROURACIL LOADED LIQUORICE CRUDE PROTEIN NANOPARTICLES FOR SUSTAINED DRUG DELIVERY USING BOX-BEHNKEN DESIGN

2021 ◽  
pp. 216-226
Author(s):  
GEETHA V. S. ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Crude Protein ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Box Behnken Design ◽  
Sustained Drug Delivery ◽  
Drug Loading Efficiency

Objective: To formulate, optimize and evaluate 5-fluorouracil loaded liquorice crude protein nanoparticles for sustained drug delivery using Box-Behnken design. Methods: 5-fluorouracil (5-FU) loaded liquorice crude protein (LCP) nanoparticles were prepared by desolvation method using ethanol-water (1:2 ratio), Tween-80 (2%v/v) as stabilizing agent and gluteraldehyde (8% v/v) as cross linking agent. The optimization of prepared nanoparticles was carried out using Box-Behnken design with 3 factors 2 levels and 3 responses. The independent variables were A)5-FU concentration B)LCP concentration and C) sonication time while the responses were R1) Drug entrapment efficiency R2) Drug loading efficiency and R3) Particle size. The correlation between factors and responses were studied through response surface plots and mathematical equations. The nanoparticles were evaluated for FTIR, physicochemical properties like particle size and zeta potential by Photon correlation spectroscopy (PCS) and surface morphology by TEM. The entrapment efficiency, drug loading efficiency and in vitro drug release studies in PBS pH 7.4 (24 h) were carried out. The observed values were found to be in close agreement with the predicted value obtained from the optimization process. Results: 5-fluorouracil loaded LCP nanoparticles were prepared by desolvation method, the optimization was carried out by Box-Behnken design and the final formulation was evaluated for particle size (301.1 nm), zeta-potential (-25.8mV), PDI(0.226), with entrapment efficiency (64.07%), drug loading efficiency (28.54%), in vitro drug release (65.2% in 24 h) respectively. The formulated nanoparticles show Higuchi model drug release kinetics with sustained drug delivery for 24 h in pH7.4 buffer. Conclusion: The results were proved to be the most valuable for the sustained delivery of 5-Fluorouracil using liquorice crude protein as carrier. 5-FU–LCP nanoparticles were prepared using Tween-80 as stabilizing agent and gluteraldehyde as cross-linking agent to possess ideal sustained drug release characteristics.

Calcium phosphate porous pellets as drug delivery systems: Effect of drug carrier composition on drug loading and in vitro release

2012 ◽  
Vol 32 (11) ◽  
pp. 2679-2690 ◽  
Author(s):  
Hiva Baradari ◽  
Chantal Damia ◽  
Maggy Dutreih-Colas ◽  
Etienne Laborde ◽  
Nathalie Pécout ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Calcium Phosphate ◽  
Drug Delivery Systems ◽  
Drug Carrier ◽  
Drug Loading ◽  
In Vitro Release ◽  
Delivery Systems ◽  
Vitro Release

A Smart Drug Delivery System Based on Thermo-Responsive Polymer Gated Au NRs@SiO2 Nano-Platform

2021 ◽  
Vol 16 (7) ◽  
pp. 1029-1036
Author(s):  
Hongzhu Wang ◽  
Mengxun Chen ◽  
Liping Song ◽  
Youju Huang
Keyword(s):  
Drug Delivery ◽  
Block Copolymer ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Photothermal Therapy ◽  
Drug Loading ◽  
Temperature Sensitive

A key challenge for nanoparticles-based drug delivery system is to achieve manageable drug release in tumour cell. In this study, a versatile system combining photothermal therapy and controllable drug release for tumour cells using temperature-sensitive block copolymer coupled Au NRs@SiO2 is reported. While the Au NRs serve as hyperthermal agent and the mesoporous silica was used to improve the drug loading and decrease biotoxicity. The block copolymer acted as “gatekeeper” to regulate the release of model drug (Doxorubicin hydrochloride, DOX). Through in vivo and in vitro experiments, we achieved the truly controllable drug release and photothermal therapy with the collaborative effect of the three constituents of the nanocomposites. The reported nanocomposites pave the way to high-performance controllable drug release and photothermal therapy system.

scholarly journals In Vitro Cytotoxicity and Antitumor Activity of Dual-Targeting Drug Delivery System Based on Modified Magnetic Carbon by Folate

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Jinglei Du ◽  
Qiang Li ◽  
Lin Chen ◽  
Shicai Wang ◽  
Li Zhang ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Delivery System ◽  
Delivery System ◽  
Hela Cells ◽  
Folate Receptor ◽  
Drug Loading ◽  
Magnetic Characteristics ◽  
Loading Capacity ◽  
Dual Targeting

A dual-targeting drug delivery system (DTDDS) with magnetic targeting and active targeting was obtained to improve the targeting and drug-loading capacity of magnetic drug nanocarriers. An ultraviolet-visible spectrophotometer and flow cytometry were used to investigate the drug-loading and release capacity, cytotoxicity, and inhibition of tumor cell proliferation, separately. Results show that DTDDS has obvious magnetic characteristics, on which the modification amount of folic acid is 64.82 mg g-1. Doxorubicin was taken as a template drug to evaluate its drug-loading capacity, which was as high as 577.12 mg g-1. Good biocompatibility and low cytotoxicity of DTDDS were further confirmed. Moreover, DTDDS can target the folate receptor on the surface of HeLa cells and deliver doxorubicin into HeLa cells, thereby increasing the proliferation inhibition for cancer cells. Therefore, this new dual-targeting drug delivery system shows potential in significantly reducing the toxic side effects of chemotherapy and improving chemotherapy efficiency.

scholarly journals SYNTHESIS AND CHARACTERIZATION OF THIOLATED JACKFRUIT SEED STARCH AS A COLONIC DRUG DELIVERY CARRIER

2019 ◽  
pp. 53-62 ◽  
Author(s):  
Sanjoy Das ◽  
Malay K. Das
Keyword(s):  
Drug Delivery ◽  
Release Kinetics ◽  
Drug Loading ◽  
Local Treatment ◽  
Entrapment Efficiency ◽  
Esterification Reaction ◽  
Compatibility Study ◽  
Mice Model ◽  
Drug Delivery Carrier

Objective: Site-specific drug delivery into the colonic region is extremely fascinating for local treatment of various colonic diseases like ulcerative colitis, colon cancer but it should be capable of saving the drug from hydrolysis and degradation. The present study reports the application of jackfruit seed starch and its thiol derivative as a drug delivery carrier for the colon. Methods: The starch was extracted from the jackfruit seeds by water extraction method and modified by the esterification reaction with thioglycolic acid. The thiolated starch was characterized for morphology, functional and flow properties. The safety profile of the thiolated starch was confirmed by acute toxicity study in a mice model as per OECD guidelines 423. The microspheres based on thiolated starch were prepared by ionic gelation method incorporating Ibuprofen as a model drug. The prepared microspheres were characterized for particle size, drug entrapment efficiency, drug loading, compatibility study, surface morphology, in vitro drug release and release kinetics. Results: The result attributed that starch was successfully modified by the thiolation with a degree of substitution of 3.30. The size of prepared microspheres ranges from 825.5±4.58 to 857±6.24 µm, the entrapment efficiencies ranges from 69.23±1.19 to 76.15±0.83 % and the drug loading capacity ranges from 17.75±0.30 to 46.05±0.49 %. The FT-IR, DSC and XRD studies confirmed that there is no interaction within drug and excipients. The thiolated starch microspheres show the maximum release of drug at pH 7.4 in the presence of rat caecal content as compared to pH 1.2 and pH 6.8 for up to 24 h and are following first order release kinetics. Conclusion: These results suggest the application of thiolated jackfruit seed starch could be promising as a long-term drug delivery carrier for the colon.

Sign in / Sign up

Export Citation Format

Share Document