scholarly journals A Two-Photon Microimaging-Microdevice System for Four-Dimensional Imaging of Local Drug Delivery in Tissues

2021 ◽  
Vol 22 (21) ◽  
pp. 11752
Author(s):  
Guigen Liu ◽  
Veronica Valvo ◽  
Sebastian W. Ahn ◽  
Devon Thompson ◽  
Kyle Deans ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Immune Cell ◽  
Drug Distribution ◽  
Study Drug ◽  
Tissue Response ◽  
Local Drug Delivery ◽  
Two Photon ◽  
Tissue Responses

Advances in the intratumor measurement of drug responses have included a pioneering biomedical microdevice for high throughput drug screening in vivo, which was further advanced by integrating a graded-index lens based two-dimensional fluorescence micro-endoscope to monitor tissue responses in situ across time. While the previous system provided a bulk measurement of both drug delivery and tissue response from a given region of the tumor, it was incapable of visualizing drug distribution and tissue responses in a three-dimensional (3D) way, thus missing the critical relationship between drug concentration and effect. Here we demonstrate a next-generation system that couples multiplexed intratumor drug release with continuous 3D spatial imaging of the tumor microenvironment via the integration of a miniaturized two-photon micro-endoscope. This enables optical sectioning within the live tissue microenvironment to effectively profile the entire tumor region adjacent to the microdevice across time. Using this novel microimaging-microdevice (MI-MD) system, we successfully demonstrated the four-dimensional imaging (3 spatial dimensions plus time) of local drug delivery in tissue phantom and tumors. Future studies include the use of the MI-MD system for monitoring of localized intra-tissue drug release and concurrent measurement of tissue responses in live organisms, with applications to study drug resistance due to nonuniform drug distribution in tumors, or immune cell responses to anti-cancer agents.

Acyclovir Loaded Solid Lipid Nanoparticle Based Cream: A Novel Drug Delivery System

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
EL- Assal I. A. ◽  
Retnowati .
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Antiviral Agent ◽  
Study Drug ◽  
Particle Size Analysis ◽  
Stability Study ◽  
Size Analysis ◽  
Solid Lipid ◽  
Dermal Delivery

Objective of the present investigation was enthused by the possibility to develop solid lipid nanoparticles (SLNs) of hydrophilic drug acyclovir. Also study vitro and vivo drug delivery. Methods: Drug loaded SLNs (ACV-SLNs) were prepared by high pressure homogenization of aqueous surfactant solutions containing the drug-loaded lipids in the melted or in the solid state with formula optimization study (Different lipid concentration, drug loaded, homogenization / stirring speed and compritol 888ATO: drug ratio). ACV - SLN incorporated in cream base. The pH was evaluated and rheological study. Drug release was evaluated and compared with simple cream- drug, ACV – SLN with compritol 888ATO and marketed cream. The potential of SLN as the carrier for dermal delivery was studied. Results: Particle size analysis of SLNs prove small, smooth, spherical shape particle ranged from 150 to 200 nm for unloaded and from 330 to 444 nm for ACV loaded particles. The EE% for optimal formula is 72% with suitable pH for skin application. Rheological behavior is shear thinning and thixotropic. Release study proved controlled drug release for SLNs especially in formula containing compritol88 ATO. Stability study emphasized an insignificant change in SLNs properties over 6 month. In-vivo study showed significantly higher accumulation of ACV in stratum corneum, dermal layer, and receptor compartment compared with blank skin. Conclusion: AVC-loaded SLNs might be beneficial in controlling drug release, stable and improving dermal delivery of antiviral agent(s).

scholarly journals Simulation of Drug Release from PLGA Particles In Vivo

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Kaori Sasaki ◽  
Martha Igarashi ◽  
Manami Hinata ◽  
Yuna Komori ◽  
Kouhei Fukushima
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Drug Distribution ◽  
Hoechst 33342 ◽  
Essential Information ◽  
Cell Specificity ◽  
Set Up

Specific targeting of tissues and/or cells is essential for any type of drug delivery system because this determines the efficacy and side effects of the drug. Poly lactic-co-glycolic acids (PLGA) have long been used as biomaterials for drug delivery due to their excellent biocompatibility and biodegradability. Direct visualization of PLGA particles is feasible even within tissues, and cell specificity of the drug delivery system is normally assessed by using labeled particles. However, particle labeling alone does not address factors such as the release and distribution of the drug. Thus, it is desirable to set up a simulation system of drug release and distribution in vivo. In the present study, we aimed to establish a method to simulate drug distribution in PLGA drug delivery by using Hoechst 33342 as an imitating drug. Our approach enabled us to identify, isolate, and characterize cells exposed to Hoechst 33342 and to deduce the concentration of this fluorescent dye around both targeted and nontargeted cells. We believe that the method described herein will provide essential information regarding the specificity of cell targeting in any type of PLGA drug delivery system.

scholarly journals Hydrogels as Drug Delivery Systems: A Review of Current Characterization and Evaluation Techniques

Pharmaceutics ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 1188
Author(s):  
Margaux Vigata ◽  
Christoph Meinert ◽  
Dietmar W. Hutmacher ◽  
Nathalie Bock
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery Systems ◽  
Analytical Techniques ◽  
Delivery Systems ◽  
Local Drug Delivery ◽  
Experimental Conditions ◽  
In Vivo Models

Owing to their tunable properties, controllable degradation, and ability to protect labile drugs, hydrogels are increasingly investigated as local drug delivery systems. However, a lack of standardized methodologies used to characterize and evaluate drug release poses significant difficulties when comparing findings from different investigations, preventing an accurate assessment of systems. Here, we review the commonly used analytical techniques for drug detection and quantification from hydrogel delivery systems. The experimental conditions of drug release in saline solutions and their impact are discussed, along with the main mathematical and statistical approaches to characterize drug release profiles. We also review methods to determine drug diffusion coefficients and in vitro and in vivo models used to assess drug release and efficacy with the goal to provide guidelines and harmonized practices when investigating novel hydrogel drug delivery systems.

scholarly journals Development of a biodegradable antifibrotic local drug delivery system for glaucoma microstents

2018 ◽  
Vol 38 (4) ◽  
Author(s):  
Thomas Stahnke ◽  
Stefan Siewert ◽  
Thomas Reske ◽  
Wolfram Schmidt ◽  
Klaus-Peter Schmitz ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Release Kinetics ◽  
Caffeic Acid Phenethyl Ester ◽  
Local Drug Delivery ◽  
Fat Depots ◽  
Fat Depot ◽  
Local Drug Delivery System

To prevent implant failure due to fibrosis is a major objective in glaucoma research. The present study investigated the antifibrotic effects of paclitaxel (PTX), caffeic acid phenethyl ester (CAPE), and pirfenidone (PFD) coated microstent test specimens in a rat model. Test specimens based on a biodegradable blend of poly(4-hydroxybutyrate) biopolymer and atactic poly(3-hydroxybutyrate) (at.P(3HB)) were manufactured, equipped with local drug delivery (LDD) coatings, and implanted in the subcutaneous white fat depot. Postoperatively, test specimens were explanted and analyzed for residual drug content. Fat depots including the test specimens were histologically analyzed. In vitro drug release studies revealed an initial burst for LDD devices. In vivo, slow drug release of PTX was found, whereas it already completed 1 week postoperatively for CAPE and PFD LDD devices. Histological examinations revealed a massive cell infiltration in the periphery of the test specimens. Compact fibrotic capsules around the LDD devices were detectable at 4–36 weeks and least pronounced around PFD-coated specimens. Capsules stained positive for extracellular matrix (ECM) components. The presented model offers possibilities to investigate release kinetics and the antifibrotic potential of drugs in vivo as well as the identification of more effective agents for a novel generation of drug-eluting glaucoma microstents.

Development and Evaluation of Floating Pulsatile Drug Delivery System Using Meloxicam

2017 ◽  
Vol 7 (04) ◽  
Author(s):  
ShirishaG. Suddala ◽  
S. K. Sahoo ◽  
M. R. Yamsani
Keyword(s):  
Rheumatoid Arthritis ◽  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Oral Dosage ◽  
Lag Phase ◽  
Pulsatile Drug Delivery

Objective: The objective of this research work was to develop and evaluate the floating– pulsatile drug delivery system (FPDDS) of meloxicam intended for Chrono pharmacotherapy of rheumatoid arthritis. Methods: The system consisting of drug containing core, coated with hydrophilic erodible polymer, which is responsible for a lag phase for pulsatile release, top cover buoyant layer was prepared with HPMC K4M and sodium bicarbonate, provides buoyancy to increase retention of the oral dosage form in the stomach. Meloxicam is a COX-2 inhibitor used to treat joint diseases such as osteoarthritis and rheumatoid arthritis. For rheumatoid arthritis Chrono pharmacotherapy has been recommended to ensure that the highest blood levels of the drug coincide with peak pain and stiffness. Result and discussion: The prepared tablets were characterized and found to exhibit satisfactory physico-chemical characteristics. Hence, the main objective of present work is to formulate FPDDS of meloxicam in order to achieve drug release after pre-determined lag phase. Developed formulations were evaluated for in vitro drug release studies, water uptake and erosion studies, floating behaviour and in vivo radiology studies. Results showed that a certain lag time before drug release which was due to the erosion of the hydrophilic erodible polymer. The lag time clearly depends on the type and amount of hydrophilic polymer which was applied on the inner cores. Floating time and floating lag time was controlled by quantity and composition of buoyant layer. In vivo radiology studies point out the capability of the system of longer residence time of the tablets in the gastric region and releasing the drug after a programmed lag time. Conclusion: The optimized formulation of the developed system provided a lag phase while showing the gastroretension followed by pulsatile drug release that would be beneficial for chronotherapy of rheumatoid arthritis and osteoarthritis.

Formulation, Development and Characterization of Floating Beads of Diltiazem Hydrochloride

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Anamika Saxena Saxena ◽  
Santosh Kitawat ◽  
Kalpesh Gaur ◽  
Virendra Singh
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery Systems ◽  
Entrapment Efficiency ◽  
Repeated Administration ◽  
Alginate Beads ◽  
Delivery Systems ◽  
Sem Analysis ◽  
Formulation Development

The main goal of any drug delivery system is to achieve desired concentration of the drug in blood or tissue, which is therapeutically effective and nontoxic for a prolonged period. Various attempts have been made to develop gastroretentive delivery systems such as high density system, swelling, floating system. The recent developments of FDDS including the physiological and formulation variables affecting gastric retention, approaches to design single-unit and multiple-unit floating systems, and their classification and formulation aspects are covered in detail. Gastric emptying is a complex process and makes in vivo performance of the drug delivery systems uncertain. In order to avoid this variability, efforts have been made to increase the retention time of the drug-delivery systems for more than 12 hours. The floating or hydrodynamically controlled drug delivery systems are useful in such application. Background of the research: Diltiazem HCL (DTZ), has short biological half life of 3-4 h, requires rather high frequency of administration. Due to repeated administration there may be chances of patient incompliance and toxicity problems. Objective: The objective of study was to develop sustained release alginate beads of DTZ for reduction in dosing frequency, high bioavailability and better patient compliance. Methodology: Five formulations prepared by using different drug to polymer ratios, were evaluated for relevant parameters and compared. Alginate beads were prepared by ionotropic external gelation technique using CaCl2 as cross linking agent. Prepared beads were evaluated for % yield, entrapment efficiency, swelling index in 0.1N HCL, drug release study and SEM analysis. In order to improve %EE and drug release, LMP and sunflower oil were used as copolymers along with sodium alginate.

Recent In Vitro and In Silico Advances in the Understanding of Intranasal Drug Delivery

2020 ◽  
Vol 26 ◽  
Author(s):  
John Chen ◽  
Andrew Martin ◽  
Warren H. Finlay
Keyword(s):  
Drug Delivery ◽  
In Silico ◽  
Local Drug Delivery ◽  
In Vivo Studies ◽  
Intranasal Drug Delivery ◽  
Nasal Sprays ◽  
In Silico Studies ◽  
Drug Delivery Devices

Background: Many drugs are delivered intranasally for local or systemic effect, typically in the form of droplets or aerosols. Because of the high cost of in vivo studies, drug developers and researchers often turn to in vitro or in silico testing when first evaluating the behavior and properties of intranasal drug delivery devices and formulations. Recent advances in manufacturing and computer technologies have allowed for increasingly realistic and sophisticated in vitro and in silico reconstructions of the human nasal airways. Objective: To perform a summary of advances in understanding of intranasal drug delivery based on recent in vitro and in silico studies. Conclusion: The turbinates are a common target for local drug delivery applications, and while nasal sprays are able to reach this region, there is currently no broad consensus across the in vitro and in silico literature concerning optimal parameters for device design, formulation properties and patient technique which would maximize turbinate deposition. Nebulizers are able to more easily target the turbinates, but come with the disadvantage of significant lung deposition. Targeting of the olfactory region of the nasal cavity has been explored for potential treatment of central nervous system conditions. Conventional intranasal devices, such as nasal sprays and nebulizers, deliver very little dose to the olfactory region. Recent progress in our understanding of intranasal delivery will be useful in the development of the next generation of intranasal drug delivery devices.

Nanostructured Ketorolac-Tromethamine/MCF: Synthesis, Characterization and Application in Drug Release System

2018 ◽  
Vol 14 (5) ◽  
pp. 432-439 ◽  
Author(s):  
Juliana M. Juarez ◽  
Jorgelina Cussa ◽  
Marcos B. Gomez Costa ◽  
Oscar A. Anunziata
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Therapeutic Efficacy ◽  
Drug Delivery Systems ◽  
Controlled Drug Release ◽  
Delivery Systems ◽  
The Body ◽  
Fickian Diffusion ◽  
Ketorolac Tromethamine

Background: Controlled drug delivery systems can maintain the concentration of drugs in the exact sites of the body within the optimum range and below the toxicity threshold, improving therapeutic efficacy and reducing toxicity. Mesostructured Cellular Foam (MCF) material is a new promising host for drug delivery systems due to high biocompatibility, in vivo biodegradability and low toxicity. Methods: Ketorolac-Tromethamine/MCF composite was synthesized. The material synthesis and loading of ketorolac-tromethamine into MCF pores were successful as shown by XRD, FTIR, TGA, TEM and textural analyses. Results: We obtained promising results for controlled drug release using the novel MCF material. The application of these materials in KETO release is innovative, achieving an initial high release rate and then maintaining a constant rate at high times. This allows keeping drug concentration within the range of therapeutic efficacy, being highly applicable for the treatment of diseases that need a rapid response. The release of KETO/MCF was compared with other containers of KETO (KETO/SBA-15) and commercial tablets. Conclusion: The best model to fit experimental data was Ritger-Peppas equation. Other models used in this work could not properly explain the controlled drug release of this material. The predominant release of KETO from MCF was non-Fickian diffusion.

In Vitro and In Vivo Drug Release from a Novel In Situ Forming Drug Delivery System

2007 ◽  
Vol 25 (6) ◽  
pp. 1347-1354 ◽  
Author(s):  
Heiko Kranz ◽  
Erol Yilmaz ◽  
Gayle A. Brazeau ◽  
Roland Bodmeier
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
In Situ Forming

scholarly journals Novel concept of the smart NIR-light–controlled drug release of black phosphorus nanostructure for cancer therapy

2018 ◽  
Vol 115 (3) ◽  
pp. 501-506 ◽  
Author(s):  
Meng Qiu ◽  
Dou Wang ◽  
Weiyuan Liang ◽  
Liping Liu ◽  
Yin Zhang ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Cancer Therapy ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Near Infrared ◽  
Black Phosphorus ◽  
Deep Penetration ◽  
Nir Light

A biodegradable drug delivery system (DDS) is one the most promising therapeutic strategies for cancer therapy. Here, we propose a unique concept of light activation of black phosphorus (BP) at hydrogel nanostructures for cancer therapy. A photosensitizer converts light into heat that softens and melts drug-loaded hydrogel-based nanostructures. Drug release rates can be accurately controlled by light intensity, exposure duration, BP concentration, and hydrogel composition. Owing to sufficiently deep penetration of near-infrared (NIR) light through tissues, our BP-based system shows high therapeutic efficacy for treatment of s.c. cancers. Importantly, our drug delivery system is completely harmless and degradable in vivo. Together, our work proposes a unique concept for precision cancer therapy by external light excitation to release cancer drugs. If these findings are successfully translated into the clinic, millions of patients with cancer will benefit from our work.

Sign in / Sign up

Export Citation Format

Share Document