scholarly journals Application of Antimicrobial Peptides on Biomedical Implants: Three Ways to Pursue Peptide Coatings

2021 ◽  
Vol 22 (24) ◽  
pp. 13212
Author(s):  
Marco G. Drexelius ◽  
Ines Neundorf
Keyword(s):  
Postoperative Complications ◽  
Antimicrobial Peptides ◽  
Medical Devices ◽  
Bacterial Adhesion ◽  
Biofilm Formation ◽  
Surface Coatings ◽  
Implant Failure ◽  
Recent Developments ◽  
Peptide Coatings ◽  
Antibiotic Agents

Biofilm formation and inflammations are number one reasons of implant failure and cause a severe number of postoperative complications every year. To functionalize implant surfaces with antibiotic agents provides perspectives to minimize and/or prevent bacterial adhesion and proliferation. In recent years, antimicrobial peptides (AMP) have been evolved as promising alternatives to commonly used antibiotics, and have been seen as potent candidates for antimicrobial surface coatings. This review aims to summarize recent developments in this field and to highlight examples of the most common techniques used for preparing such AMP-based medical devices. We will report on three different ways to pursue peptide coatings, using either binding sequences (primary approach), linker layers (secondary approach), or loading in matrixes which offer a defined release (tertiary approach). All of them will be discussed in the light of current research in this area.

scholarly journals A Real-Time Thermal Sensor System for Quantifying the Inhibitory Effect of Antimicrobial Peptides on Bacterial Adhesion and Biofilm Formation

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2771
Author(s):  
Tobias Wieland ◽  
Julia Assmann ◽  
Astrid Bethe ◽  
Christian Fidelak ◽  
Helena Gmoser ◽  
...  
Keyword(s):  
Antimicrobial Peptides ◽  
Real Time ◽  
Bacterial Adhesion ◽  
Biofilm Formation ◽  
Pathogenic Bacteria ◽  
Bovine Mastitis ◽  
Inhibitory Effect ◽  
Thermal Sensor ◽  
Bacterial Cells ◽  
Static Conditions

The increasing rate of antimicrobial resistance (AMR) in pathogenic bacteria is a global threat to human and veterinary medicine. Beyond antibiotics, antimicrobial peptides (AMPs) might be an alternative to inhibit the growth of bacteria, including AMR pathogens, on different surfaces. Biofilm formation, which starts out as bacterial adhesion, poses additional challenges for antibiotics targeting bacterial cells. The objective of this study was to establish a real-time method for the monitoring of the inhibition of (a) bacterial adhesion to a defined substrate and (b) biofilm formation by AMPs using an innovative thermal sensor. We provide evidence that the thermal sensor enables continuous monitoring of the effect of two potent AMPs, protamine and OH-CATH-30, on surface colonization of bovine mastitis-associated Escherichia (E.) coli and Staphylococcus (S.) aureus. The bacteria were grown under static conditions on the surface of the sensor membrane, on which temperature oscillations generated by a heater structure were detected by an amorphous germanium thermistor. Bacterial adhesion, which was confirmed by white light interferometry, caused a detectable amplitude change and phase shift. To our knowledge, the thermal measurement system has never been used to assess the effect of AMPs on bacterial adhesion in real time before. The system could be used to screen and evaluate bacterial adhesion inhibition of both known and novel AMPs.

scholarly journals Antimicrobial Peptides-Coated Stainless Steel for Fighting Biofilms Formation for Food and Medical Fields: Review of Literature

Coatings ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1216
Author(s):  
Mayssane Hage ◽  
Hikmat Akoum ◽  
Nour-Eddine Chihib ◽  
Charafeddine Jama
Keyword(s):  
Stainless Steel ◽  
Antimicrobial Peptides ◽  
Bacterial Adhesion ◽  
Biofilm Formation ◽  
Bacterial Biofilms ◽  
Food Environments ◽  
Review Of Literature ◽  
Safe Alternative ◽  
Antimicrobial Coatings ◽  
Biofilm Development

Emerging technology regarding antimicrobial coatings contributes to fighting the challenge of pathogenic bacterial biofilms in medical and agri-food environments. Stainless steel is a material widely used in those fields since it has satisfying mechanical properties, but it, unfortunately, lacks the required bio-functionality, rendering it vulnerable to bacterial adhesion and biofilm formation. Therefore, this review aims to present the coatings developed by employing biocides grafted on stainless steel. It also highlights antimicrobial peptides (AMPs)used to coat stainless steel, particularly nisin, which is commonly accepted as a safe alternative to prevent pathogenic biofilm development.

Novel Surface Coatings Modulating Eukaryotic Cell Adhesion and Preventing Implant Infection

2009 ◽  
Vol 32 (9) ◽  
pp. 655-662 ◽  
Author(s):  
JÜRGEN Groll ◽  
JÖRG Fiedler ◽  
Kristina Bruellhoff ◽  
Martin Moeller ◽  
Rolf E. Brenner
Keyword(s):  
Cell Adhesion ◽  
Bacterial Adhesion ◽  
Biofilm Formation ◽  
Eukaryotic Cell ◽  
Organic Coating ◽  
Surface Coatings ◽  
Osteoblastic Cells ◽  
Orthopedic Implant ◽  
Small Peptide ◽  
Implant Infection

Poor osseointegration and bacterial infection are major causes of orthopedic implant failure. Both problems arise from passive unspecific protein coating that may not optimally support adhesion of osteoblastic cells and which enable bacterial adhesion that subsequently results in biofilm formation. This review addresses emerging concepts of preventing unspecific protein adsorption and biofilm formation by organic coating systems. We especially focus on recent concepts that additionally allow functionalization for preferential cell adhesion using cell adhesion mediating small peptide sequences that do not induce bacterial adherence. One promising approach that is presented and discussed within this context is the use of NCO-sP(EO-stat-PO).

scholarly journals Strategies for Antimicrobial Peptides Immobilization on Surfaces to Prevent Biofilm Growth on Biomedical Devices

Antibiotics ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 13
Author(s):  
Mathieu Nicolas ◽  
Bruno Beito ◽  
Marta Oliveira ◽  
Maria Tudela Martins ◽  
Bruno Gallas ◽  
...  
Keyword(s):  
Antimicrobial Peptides ◽  
Surface Functionalization ◽  
Bacterial Adhesion ◽  
Biofilm Formation ◽  
Biomedical Applications ◽  
Mechanisms Of Action ◽  
Bacterial Attachment ◽  
Biofilm Growth ◽  
Synthetic Routes ◽  
Immobilization Techniques

Nosocomial and medical device-induced biofilm infections affect millions of lives and urgently require innovative preventive approaches. These pathologies have led to the development of numerous antimicrobial strategies, an emergent topic involving both natural and synthetic routes, among which some are currently under testing for clinical approval and use. Antimicrobial peptides (AMPs) are ideal candidates for this fight. Therefore, the strategies involving surface functionalization with AMPs to prevent bacterial attachment/biofilms formation have experienced a tremendous development over the last decade. In this review, we describe the different mechanisms of action by which AMPs prevent bacterial adhesion and/or biofilm formation to better address their potential as anti-infective agents. We additionally analyze AMP immobilization techniques on a variety of materials, with a focus on biomedical applications. Furthermore, we summarize the advances made to date regarding the immobilization strategies of AMPs on various surfaces and their ability to prevent the adhesion of various microorganisms. Progress toward the clinical approval of AMPs in antibiotherapy is also reviewed.

scholarly journals 2-Methacryloyloxyethyl Phosphorylcholine Polymer Coating Inhibits Bacterial Adhesion and Biofilm Formation on a Suture: An In Vitro and In Vivo Study

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Taizo Kaneko ◽  
Taku Saito ◽  
Takeo Shobuike ◽  
Hiroshi Miyamoto ◽  
Junpei Matsuda ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Medical Devices ◽  
Bacterial Adhesion ◽  
Biofilm Formation ◽  
Butyl Methacrylate ◽  
Bacterial Suspension ◽  
Adhesion Test ◽  
Planktonic Bacteria

Initial bacterial adhesion to medical devices and subsequent biofilm formation are known as the leading causes of surgical site infection (SSI). Therefore, inhibition of bacterial adhesion and biofilm formation on the surface of medical devices can reduce the risk of SSIs. In this study, a highly hydrophilic, antibiofouling surface was prepared by coating the bioabsorbable suture surface with poly(2-methacryloyloxyethyl phosphorylcholine (MPC)-co-n-butyl methacrylate) (PMB). The PMB-coated and noncoated sutures exhibited similar mechanical strength and surface morphology. The effectiveness of the PMB coating on the suture to suppress adhesion and biofilm formation of methicillin-resistant Staphylococcus aureus and methicillin-susceptible Staphylococcus aureus was investigated both in vitro and in vivo. The bacterial adhesion test revealed that PMB coating significantly reduced the number of adherent bacteria, with no difference in the number of planktonic bacteria. Moreover, fluorescence microscopy and scanning electron microscopy observations of adherent bacteria on the suture surface after contact with bacterial suspension confirmed PMB coating-mediated inhibition of biofilm formation. Additionally, we found that the PMB-coated sutures exhibited significant antibiofouling effects in vivo. In conclusion, PMB-coated sutures demonstrated bacteriostatic effects associated with a highly hydrophilic, antibiofouling surface and inhibited bacterial adhesion and biofilm formation. Therefore, PMB-coated sutures could be a new alternative to reduce the risk of SSIs.

Bacterial biofilm behavior in water-supply lines of dental units

1992 ◽  
Vol 50 (1) ◽  
pp. 882-883
Author(s):  
B.D. Tall ◽  
K.S. George ◽  
R. T. Gray ◽  
H.N. Williams
Keyword(s):  
Water Supply ◽  
Medical Devices ◽  
Biofilm Formation ◽  
Bacterial Biofilm

Studies of bacterial behavior in many environments have shown that most organisms attach to surfaces, forming communities of microcolonies called biofilms. In contaminated medical devices, biofilms may serve both as reservoirs and as inocula for the initiation of infections. Recently, there has been much concern about the potential of dental units to transmit infections. Because the mechanisms of biofilm formation are ill-defined, we investigated the behavior and formation of a biofilm associated with tubing leading to the water syringe of a dental unit over a period of 1 month.

Antimicrobial Peptides for the Control of Biofilm Formation

2017 ◽  
Vol 17 (17) ◽  
pp. 1965-1986 ◽  
Author(s):  
Mercedes Gonzalez Moreno ◽  
Lisa Lombardi ◽  
Mariagrazia Di Luca
Keyword(s):  
Antimicrobial Peptides ◽  
Biofilm Formation

scholarly journals Surface Immobilization of Nano-Silver on Polymeric Medical Devices to Prevent Bacterial Biofilm Formation

Pathogens ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 93 ◽  
Author(s):  
Riau ◽  
Aung ◽  
Setiawan ◽  
Yang ◽  
Yam ◽  
...  
Keyword(s):  
Medical Devices ◽  
Biofilm Formation ◽  
Culture Media ◽  
Silver Ions ◽  
Bacterial Biofilm ◽  
Surface Immobilization ◽  
Nano Silver ◽  
Gram Positive Bacteria ◽  
Tissue Microenvironment

: Bacterial biofilm on medical devices is difficult to eradicate. Many have capitalized the anti-infective capability of silver ions (Ag+) by incorporating nano-silver (nAg) in a biodegradable coating, which is then laid on polymeric medical devices. However, such coating can be subjected to premature dissolution, particularly in harsh diseased tissue microenvironment, leading to rapid nAg clearance. It stands to reason that impregnating nAg directly onto the device, at the surface, is a more ideal solution. We tested this concept for a corneal prosthesis by immobilizing nAg and nano-hydroxyapatite (nHAp) on poly(methyl methacrylate), and tested its biocompatibility with human stromal cells and antimicrobial performance against biofilm-forming pathogens, Pseudomonas aeruginosa and Staphylococcus aureus. Three different dual-functionalized substrates—high Ag (referred to as 75:25 HAp:Ag); intermediate Ag (95:5 HAp:Ag); and low Ag (99:1 HAp:Ag) were studied. The 75:25 HAp:Ag was effective in inhibiting biofilm formation, but was cytotoxic. The 95:5 HAp:Ag showed the best selectivity among the three substrates; it prevented biofilm formation of both pathogens and had excellent biocompatibility. The coating was also effective in eliminating non-adherent bacteria in the culture media. However, a 28-day incubation in artificial tear fluid revealed a ~40% reduction in Ag+ release, compared to freshly-coated substrates. The reduction affected the inhibition of S. aureus growth, but not the P. aeruginosa. Our findings suggest that Ag+ released from surface-immobilized nAg diminishes over time and becomes less effective in suppressing biofilm formation of Gram-positive bacteria, such as S. aureus. This advocates the coating, more as a protection against perioperative and early postoperative infections, and less as a long-term preventive solution.

scholarly journals Bond Strengthening in Oral Bacterial Adhesion to Salivary Conditioning Films

2008 ◽  
Vol 74 (17) ◽  
pp. 5511-5515 ◽  
Author(s):  
Henny C. van der Mei ◽  
Minie Rustema-Abbing ◽  
Joop de Vries ◽  
Henk J. Busscher
Keyword(s):  
Bacterial Adhesion ◽  
Biofilm Formation ◽  
Specific Interactions ◽  
Adhesion Forces ◽  
Bacterial Strains ◽  
Bacterial Interactions ◽  
Initial Adhesion ◽  
Conditioning Film ◽  
Interacting Surfaces ◽  
Conditioning Films

ABSTRACT Transition from reversible to irreversible bacterial adhesion is a highly relevant but poorly understood step in initial biofilm formation. We hypothesize that in oral biofilm formation, irreversible adhesion is caused by bond strengthening due to specific bacterial interactions with salivary conditioning films. Here, we compared the initial adhesion of six oral bacterial strains to salivary conditioning films with their adhesion to a bovine serum albumin (BSA) coating and related their adhesion to the strengthening of the binding forces measured with bacteria-coated atomic force microscopy cantilevers. All strains adhered in higher numbers to salivary conditioning films than to BSA coatings, and specific bacterial interactions with salivary conditioning films were accompanied by stronger initial adhesion forces. Bond strengthening occurred on a time scale of several tens of seconds and was slower for actinomyces than for streptococci. Nonspecific interactions between bacteria and BSA coatings strengthened twofold faster than their specific interactions with salivary conditioning films, likely because specific interactions require a closer approach of interacting surfaces with the removal of interfacial water and a more extensive rearrangement of surface structures. After bond strengthening, bacterial adhesion forces with a salivary conditioning film remained stronger than those with BSA coatings.

Sign in / Sign up

Export Citation Format

Share Document