scholarly journals A Real-Time Thermal Sensor System for Quantifying the Inhibitory Effect of Antimicrobial Peptides on Bacterial Adhesion and Biofilm Formation

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2771
Author(s):  
Tobias Wieland ◽  
Julia Assmann ◽  
Astrid Bethe ◽  
Christian Fidelak ◽  
Helena Gmoser ◽  
...  
Keyword(s):  
Antimicrobial Peptides ◽  
Real Time ◽  
Bacterial Adhesion ◽  
Biofilm Formation ◽  
Pathogenic Bacteria ◽  
Bovine Mastitis ◽  
Inhibitory Effect ◽  
Thermal Sensor ◽  
Bacterial Cells ◽  
Static Conditions

The increasing rate of antimicrobial resistance (AMR) in pathogenic bacteria is a global threat to human and veterinary medicine. Beyond antibiotics, antimicrobial peptides (AMPs) might be an alternative to inhibit the growth of bacteria, including AMR pathogens, on different surfaces. Biofilm formation, which starts out as bacterial adhesion, poses additional challenges for antibiotics targeting bacterial cells. The objective of this study was to establish a real-time method for the monitoring of the inhibition of (a) bacterial adhesion to a defined substrate and (b) biofilm formation by AMPs using an innovative thermal sensor. We provide evidence that the thermal sensor enables continuous monitoring of the effect of two potent AMPs, protamine and OH-CATH-30, on surface colonization of bovine mastitis-associated Escherichia (E.) coli and Staphylococcus (S.) aureus. The bacteria were grown under static conditions on the surface of the sensor membrane, on which temperature oscillations generated by a heater structure were detected by an amorphous germanium thermistor. Bacterial adhesion, which was confirmed by white light interferometry, caused a detectable amplitude change and phase shift. To our knowledge, the thermal measurement system has never been used to assess the effect of AMPs on bacterial adhesion in real time before. The system could be used to screen and evaluate bacterial adhesion inhibition of both known and novel AMPs.

Dual-Targeting Approach Degrades Biofilm Matrix and Enhances Bacterial Killing

2019 ◽  
Vol 98 (3) ◽  
pp. 322-330 ◽  
Author(s):  
Z. Ren ◽  
D. Kim ◽  
A.J. Paula ◽  
G. Hwang ◽  
Y. Liu ◽  
...  
Keyword(s):  
Bacterial Adhesion ◽  
Biofilm Formation ◽  
Pathogenic Bacteria ◽  
Commensal Bacteria ◽  
Bacterial Cells ◽  
Bacterial Killing ◽  
Cariogenic Bacteria ◽  
Dual Targeting ◽  
Wide Range ◽  
The Matrix

Biofilm formation is a key virulence factor responsible for a wide range of infectious diseases, including dental caries. Cariogenic biofilms are structured microbial communities embedded in an extracellular matrix that affords bacterial adhesion-cohesion and drug tolerance, making them difficult to treat using conventional antimicrobial monotherapy. Here, we investigated a multitargeted approach combining exopolysaccharide (EPS) matrix-degrading glucanohydrolases with a clinically used essential oils–based antimicrobial to potentiate antibiofilm efficacy. Our data showed that dextranase and mutanase can synergistically break down the EPS glucan matrix in preformed cariogenic biofilms, markedly enhancing bacterial killing by the antimicrobial agent (3-log increase versus antimicrobial alone). Further analyses revealed that an EPS-degrading/antimicrobial (EDA) approach disassembles the matrix scaffold, exposing the bacterial cells for efficient killing while concurrently causing cellular dispersion and “physical collapse” of the bacterial clusters. Unexpectedly, we found that the EDA approach can also selectively target the EPS-producing cariogenic bacteria Streptococcus mutans with higher killing specificity (versus other species) within mixed biofilms, disrupting their accumulation and promoting dominance of commensal bacteria. Together, these results demonstrate a dual-targeting approach that can enhance antibiofilm efficacy and precision by dismantling the EPS matrix and its protective microenvironment, amplifying the killing of pathogenic bacteria within.

Antibiotics Application Strategies to Control Biofilm Formation in Pathogenic Bacteria

2020 ◽  
Vol 21 (4) ◽  
pp. 270-286 ◽  
Author(s):  
Fazlurrahman Khan ◽  
Dung T.N. Pham ◽  
Sandra F. Oloketuyi ◽  
Young-Mog Kim
Keyword(s):  
Biofilm Formation ◽  
Pathogenic Bacteria ◽  
Extracellular Polymeric Substances ◽  
Quorum Quenching ◽  
Resistance Mechanisms ◽  
Bacterial Biofilm ◽  
Bacterial Cells ◽  
High Concentration ◽  
Biofilm Inhibition ◽  
Abiotic Surfaces

Background: The establishment of a biofilm by most pathogenic bacteria has been known as one of the resistance mechanisms against antibiotics. A biofilm is a structural component where the bacterial community adheres to the biotic or abiotic surfaces by the help of Extracellular Polymeric Substances (EPS) produced by bacterial cells. The biofilm matrix possesses the ability to resist several adverse environmental factors, including the effect of antibiotics. Therefore, the resistance of bacterial biofilm-forming cells could be increased up to 1000 times than the planktonic cells, hence requiring a significantly high concentration of antibiotics for treatment. Methods: Up to the present, several methodologies employing antibiotics as an anti-biofilm, antivirulence or quorum quenching agent have been developed for biofilm inhibition and eradication of a pre-formed mature biofilm. Results: Among the anti-biofilm strategies being tested, the sub-minimal inhibitory concentration of several antibiotics either alone or in combination has been shown to inhibit biofilm formation and down-regulate the production of virulence factors. The combinatorial strategies include (1) combination of multiple antibiotics, (2) combination of antibiotics with non-antibiotic agents and (3) loading of antibiotics onto a carrier. Conclusion: The present review paper describes the role of several antibiotics as biofilm inhibitors and also the alternative strategies adopted for applications in eradicating and inhibiting the formation of biofilm by pathogenic bacteria.

Evaluation of antibacterial, teratogenicity and antibiofilm effect of sulfated chitosans extracted from marine waste against microorganism

2021 ◽  
pp. 088391152110142
Author(s):  
Velu Gomathy ◽  
Venkatesan Manigandan ◽  
Narasimman Vignesh ◽  
Aavula Thabitha ◽  
Ramachandran Saravanan
Keyword(s):  
Biofilm Formation ◽  
Pathogenic Bacteria ◽  
Antimicrobial Agents ◽  
Inhibitory Effect ◽  
Diffusion Method ◽  
Marine Litter ◽  
Ionization Time ◽  
Gram Positive Bacteria ◽  
Mineral Components ◽  
Ft Ir

Biofilms play a key role in infectious diseases, as they may form on the surface and persist after treatment with various antimicrobial agents. The Staphylococcus aureus, Klebsiella pneumoniae, S. typhimurium, P. aeruginosa, and Escherichia coli most frequently associated with medical devices. Chitosan sulphate from marine litter (SCH-MW) was extracted and the mineral components were determined using atomic absorption spectroscopy (AAS). The degree of deacetylation (DA) of SCH was predicted 50% and 33.3% in crab and shrimp waste respectively. The elucidation of the structure of the SCH-MW was portrayed using FT-IR and 1H-NMR spectroscopy. The molecular mass of SCH-MW was determined with Matrix-Assisted Laser Desorption/Ionization-Time of Flight (MALDI-TOF). The teratogenicity of SCH-MW was characterized by the zebrafish embryo (ZFE) model. Antimicrobial activity of SCH-MW was tested with the agar well diffusion method; the inhibitory effect of SCH-MW on biofilm formation was assessed in 96 flat well polystyrene plates. The result revealed that a low concentration of crab-sulfated chitosan inhibited bacterial growth and significantly reduced the anti-biofilm activity of gram-negative and gram-positive bacteria relatively to shrimp. It is potentially against the biofilm formation of pathogenic bacteria.

scholarly journals Application of Bacteriophages on Shiga Toxin-Producing Escherichia coli (STEC) Biofilm

Antibiotics ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1423
Author(s):  
Nicola Mangieri ◽  
Roberto Foschino ◽  
Claudia Picozzi
Keyword(s):  
Escherichia Coli ◽  
Shiga Toxin ◽  
Biofilm Formation ◽  
Pathogenic Bacteria ◽  
Antimicrobial Agents ◽  
Bacterial Cells ◽  
Abiotic Surfaces ◽  
Continuous Presence ◽  
Different Strains ◽  
Better Than

Shiga toxin-producing Escherichia coli are pathogenic bacteria able to form biofilms both on abiotic surfaces and on food, thus increasing risks for food consumers. Moreover, biofilms are difficult to remove and more resistant to antimicrobial agents compared to planktonic cells. Bacteriophages, natural predators of bacteria, can be used as an alternative to prevent biofilm formation or to remove pre-formed biofilm. In this work, four STEC able to produce biofilm were selected among 31 different strains and tested against single bacteriophages and two-phage cocktails. Results showed that our phages were able to reduce biofilm formation by 43.46% both when used as single phage preparation and as a cocktail formulation. Since one of the two cocktails had a slightly better performance, it was used to remove pre-existing biofilms. In this case, the phages were unable to destroy the biofilms and reduce the number of bacterial cells. Our data confirm that preventing biofilm formation in a food plant is better than trying to remove a preformed biofilm and the continuous presence of bacteriophages in the process environment could reduce the number of bacteria able to form biofilms and therefore improve the food safety.

scholarly journals A microfluidic platform for in situ investigation of biofilm formation and its treatment under controlled conditions

2020 ◽  
Vol 18 (1) ◽  
Author(s):  
Hervé Straub ◽  
Leo Eberl ◽  
Manfred Zinn ◽  
René M. Rossi ◽  
Katharina Maniura-Weber ◽  
...  
Keyword(s):  
Single Cell ◽  
Real Time ◽  
Bacterial Adhesion ◽  
Biofilm Formation ◽  
Bacterial Colonization ◽  
Rich Medium ◽  
Flow Conditions ◽  
Microfluidic Platform ◽  
Adhesion Rate

Abstract Background Studying bacterial adhesion and early biofilm development is crucial for understanding the physiology of sessile bacteria and forms the basis for the development of novel antimicrobial biomaterials. Microfluidics technologies can be applied in such studies since they permit dynamic real-time analysis and a more precise control of relevant parameters compared to traditional static and flow chamber assays. In this work, we aimed to establish a microfluidic platform that permits real-time observation of bacterial adhesion and biofilm formation under precisely controlled homogeneous laminar flow conditions. Results Using Escherichia coli as the model bacterial strain, a microfluidic platform was developed to overcome several limitations of conventional microfluidics such as the lack of spatial control over bacterial colonization and allow label-free observation of bacterial proliferation at single-cell resolution. This platform was applied to demonstrate the influence of culture media on bacterial colonization and the consequent eradication of sessile bacteria by antibiotic. As expected, the nutrient-poor medium (modified M9 minimal medium) was found to promote bacterial adhesion and to enable a higher adhesion rate compared to the nutrient-rich medium (tryptic soy broth rich medium ). However, in rich medium the adhered cells colonized the glass surface faster than those in poor medium under otherwise identical conditions. For the first time, this effect was demonstrated to be caused by a higher retention of newly generated bacteria in the rich medium, rather than faster growth especially during the initial adhesion phase. These results also indicate that higher adhesion rate does not necessarily lead to faster biofilm formation. Antibiotic treatment of sessile bacteria with colistin was further monitored by fluorescence microscopy at single-cell resolution, allowing in situ analysis of killing efficacy of antimicrobials. Conclusion The platform established here represents a powerful and versatile tool for studying environmental effects such as medium composition on bacterial adhesion and biofilm formation. Our microfluidic setup shows great potential for the in vitro assessment of new antimicrobials and antifouling agents under flow conditions.

scholarly journals Staphylococcal slime layers and biofilm from different origins

2019 ◽  
Vol 49 (5) ◽  
Author(s):  
Rodrigo Casquero Cunha ◽  
Michelle Dias Hornes da Rosa ◽  
Cleomar da Silva ◽  
Francisco Denis Souza Santos ◽  
Fábio Pereira Leivas Leite
Keyword(s):  
Biofilm Formation ◽  
Pathogenic Bacteria ◽  
Antimicrobial Agents ◽  
Susceptibility Testing ◽  
Bovine Mastitis ◽  
Diffusion Method ◽  
Slime Layer ◽  
Gentamicin Resistance ◽  
Different Origins ◽  
Staphylococcus Spp

ABSTRACT: The genus Staphylococcus comprises some of the most important pathogenic bacteria for both humans and animals. It is responsible for bovine mastitis and canine otitis, besides being present in the microbiota of animals and as a contaminant in food. Its pathogenesis is related to the formation of capsule and biofilm, which contribute to its infectivity. The objective of this study was to observe the production of slime layer and formation of biofilm, which are related to the resistance to antimicrobial agents and presence of icaA and icaD genes, in 41 isolates of Staphylococcus spp. from different origins, provided by the Universidade Federal de Pelotas (UFPEL), Laboratório Regional de Diagnóstico (LRD). Strains of Staphylococcus spp. were cultivated in Congo red agar for capsule detection. Biofilm formation was detected using the 96-well microplate testing. Antimicrobial susceptibility testing was performed using the plate diffusion method. Part of the analyzed samples produced slime layer (36.6%) and formed biofilm (17.1%). However, six of those that formed biofilms were susceptible to the eight antibiotics tested in the antibiogram. In tests to determine the minimum bactericidal and inhibitory concentrations, gentamicin resistance of biofilm-forming strains was greater than that of non-forming strains. Ampicillin was the least effective antimicrobial drug (51%), followed by tetracycline (71%), neomycin (73%), and erythromycin (73%). Some isolates presented the icaA (6) and icaD (11) genes. Therefore, we suggested that the origin of an isolate can determine its expression of virulence factor and resistance to certain antibiotics.

Identification of lactobacilli with inhibitory effect on biofilm formation by pathogenic bacteria on stainless steel surfaces

2014 ◽  
Vol 191 ◽  
pp. 116-124 ◽  
Author(s):  
Fatma Ait Ouali ◽  
Imad Al Kassaa ◽  
Benoit Cudennec ◽  
Marwan Abdallah ◽  
Farida Bendali ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Biofilm Formation ◽  
Pathogenic Bacteria ◽  
Inhibitory Effect ◽  
Steel Surfaces

scholarly journals Inhibitory Effect of Vanillin on Biofilm Formation by Multi-Species Wastewater Culture

2020 ◽  
Vol 23 (4) ◽  
pp. 274-279
Author(s):  
Xiurong Si ◽  
Ding Ding ◽  
Jianhua Zhou ◽  
Zhangwei Cao
Keyword(s):  
Membrane Fouling ◽  
Biofilm Formation ◽  
Extracellular Polymeric Substances ◽  
Inhibitory Effect ◽  
Inhibition Rate ◽  
Microbial Adhesion ◽  
Fouling Control ◽  
Microfluidic Chamber ◽  
Research Findings ◽  
Static Conditions

This paper mainly investigates the inhibitory effect and mechanism of vanillin on mixed-culture biofilm formation, and discusses the feasibility of controlling membrane fouling with vanillin. The biofilms were cultured under static conditions and a microfluidic chamber, respectively. The results show that vanillin can effectively inhibit the microbial adhesion and biofilm formation; the inhibition rate increases with the vanillin concentration. After 12h treatment with 300mg/L vanillin, the inhibition rate of biofilm formation reached 85.34%. Besides, vanillin can mitigate bacterial adhesion by reducing the microbial secretion of exoprotein and exopolysaccharide, exhibit an inhibitory effect on the expression of N-acyl-l-homoserine lactones (AHLs), but had no effect on environmental deoxyribonucleic acid (eDNA). After being treated with 300mg/L vanillin, exoprotein, exopolysaccharide and AHLs decreased by 28.48%, 17.23% and 46.64%, respectively. Furthermore, there is a positive correlation between the AHLs and the content of extracellular polymeric substances (EPSs); the AHLs-mediated quorum sensing (QS) might be related to microbial adhesion through the regulation of EPS. Finally, vanillin has a great potential in membrane fouling control. The research findings provide a good reference for biofilm control in water purification and wastewater treatment systems.

scholarly journals Antimicrobial Peptides-Coated Stainless Steel for Fighting Biofilms Formation for Food and Medical Fields: Review of Literature

Coatings ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1216
Author(s):  
Mayssane Hage ◽  
Hikmat Akoum ◽  
Nour-Eddine Chihib ◽  
Charafeddine Jama
Keyword(s):  
Stainless Steel ◽  
Antimicrobial Peptides ◽  
Bacterial Adhesion ◽  
Biofilm Formation ◽  
Bacterial Biofilms ◽  
Food Environments ◽  
Review Of Literature ◽  
Safe Alternative ◽  
Antimicrobial Coatings ◽  
Biofilm Development

Emerging technology regarding antimicrobial coatings contributes to fighting the challenge of pathogenic bacterial biofilms in medical and agri-food environments. Stainless steel is a material widely used in those fields since it has satisfying mechanical properties, but it, unfortunately, lacks the required bio-functionality, rendering it vulnerable to bacterial adhesion and biofilm formation. Therefore, this review aims to present the coatings developed by employing biocides grafted on stainless steel. It also highlights antimicrobial peptides (AMPs)used to coat stainless steel, particularly nisin, which is commonly accepted as a safe alternative to prevent pathogenic biofilm development.

Sign in / Sign up

Export Citation Format

Share Document