scholarly journals Structural and Magnetic Property of Cr3+ Substituted Cobalt Ferrite Nanomaterials Prepared by the Sol-Gel Method

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2095 ◽  
Author(s):  
Jinpei Lin ◽  
Jiaqi Zhang ◽  
Hao Sun ◽  
Qing Lin ◽  
Zeping Guo ◽  
...  
Keyword(s):  
Saturation Magnetization ◽  
Sol Gel ◽  
Combustion Method ◽  
Lattice Parameter ◽  
Cubic Phase ◽  
Cobalt Chromium ◽  
X Ray Diffraction ◽  
Chromium Doping ◽  
Auto Combustion ◽  
Cr Concentration

Cobalt-chromium ferrite, CoCrxFe2−xO4 (x = 0–1.2), has been synthesized by the sol-gel auto-combustion method. X-ray diffraction (XRD) indicates that samples calcined at 800 °C for 3 h were a single-cubic phase. The lattice parameter decreased with increasing Cr concentration. Scanning electron microscopy (SEM) confirmed that the sample powders were nanoparticles. It was confirmed from the room temperature Mössbauer spectra that transition from the ferrimagnetic state to the superparamagnetic state occurred with the doping of chromium. Both the saturation magnetization and the coercivity decreased with the chromium doping. With a higher annealing temperature, the saturation magnetization increased and the coercivity increased initially and then decreased for CoCr0.2Fe1.8O4.

scholarly journals Structural and Magnetic Studies of Cr3+ Substituted Nickel Ferrite Nanomaterials Prepared by Sol-Gel Auto-Combustion

Crystals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 384 ◽  
Author(s):  
Jinpei Lin ◽  
Yun He ◽  
Xianglin Du ◽  
Qing Lin ◽  
Hu Yang ◽  
...  
Keyword(s):  
Nickel Ferrite ◽  
Magnetic Hyperfine Field ◽  
Sol Gel ◽  
Combustion Method ◽  
Lattice Parameter ◽  
Nano Particles ◽  
Magnetic Studies ◽  
Auto Combustion ◽  
Phase Spinel ◽  
Cr Concentration

The present study envisages the preparation of chromium substituted Nickel ferrite NiCrxFe2−xO4 (x = 0~1.0) powders by a sol-gel auto-combustion method. X-ray diffraction analysis (XRD) showed that the specimens with x > 0.2 exhibited a single-phase spinel structure, and that more content of Cr within a specimen is favorable for the synthesis of pure Ni-Cr ferrites. The lattice parameter decreased with an increase in the Cr concentration. The sample without calcining exhibited a good crystallinity. Scanning Electron Microscopy (SEM) showed the formation of ferrite powders nano-particles, and that the substitution of Cr weakened the agglomeration between the particles. Mössbauer spectra of NiCrxFe2−xO4 showed two normal Zeeman-split sextets that displayed a ferrimagnetic behavior. Furthermore, the spectra indicated that iron was in the Fe3+ state, and the magnetic hyperfine field at the tetrahedral tended to decrease with an increase in the Cr substitution. The saturation magnetization decreased by the Cr3+ ions, and reached a minimum value (Ms = 4.46 emu/g). With an increase in the annealing temperature, the coercivity increased initially, which later decreased.

Effect of Mg Substitution on Microwave Absorption of BaFe12O19

2012 ◽  
Vol 585 ◽  
pp. 62-66 ◽  
Author(s):  
Abhishek Kumar ◽  
Vijaya Agarwala ◽  
Dharmendra Singh
Keyword(s):  
Ultrafine Particles ◽  
Sol Gel ◽  
Combustion Method ◽  
Xrd Analysis ◽  
Lattice Parameter ◽  
Complex Permeability ◽  
Molecular Formula ◽  
X Ray Diffraction ◽  
Auto Combustion ◽  
Sem Study

The Magnesium substituted barium hexaferrites were prepared by sol-gel auto-combustion method according to the molecular formula BaMgxFe(12−x)O19 (x=0, 0.5 and 1). The crystalline structure, morphology, complex permittivity, and complex permeability were measured with X-ray Diffraction (XRD), Field Emission-Scanning Electron Microscopy (FE-SEM) and Vector Network Analyzer (VNA) respectively. From XRD study, the formations of single phase ultrafine particles have been confirmed. The XRD analysis showed that variation in lattice parameter with change in x value. The FE-SEM study shows that synthesized particles have hexagonal morphology. The minimum reflection loss of -24.86 dB at 9.04 GHz was found with the increase in band width at x=1, which suits its application as RADAR absorbing materials.

scholarly journals Effect of Heat Treatment on Structural and Magnetic Properties of Li-Ni Ferrite Prepared via Sol-Gel Auto-Combustion Method

2021 ◽  
Author(s):  
Jiali Song ◽  
Zhi Wang ◽  
Yu Gao
Keyword(s):  
Grain Size ◽  
Magnetic Properties ◽  
Annealing Temperature ◽  
Sol Gel ◽  
Combustion Method ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion ◽  
Ft Ir

Abstract Nanocrystalline Li 0.35 Ni 0.3 Fe 2.35 O 4 ferrites were prepared at different annealing temperature by sol-gel auto-combustion method. The effects of the annealing temperature on the structure and magnetic properties of the synthesized Li-Ni ferrites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectra (FT-IR) and Squid-VSM. Rietveld refinement of the X-ray diffraction data confirmed the occurrence of phase transition from α-spinel to β-spinel, from which the ideal cation occupation and lattice parameter can be obtained. The grain size increased significantly with annealing temperature. The variation of saturation magnetization can be well explained in terms of the occupation of ions in tetrahedron and octahedron. The coercivity initially increased and later decreased significantly from 115 to 37 Oe with the increase of annealed temperature which could be attributed the fact that the 600℃-annealed grain size is close to transition size from single to multidomain region.

scholarly journals Y3+ substituted Sr-hexaferrites: sol-gel synthesis, structural, magnetic and electrical characterization

Cerâmica ◽  
2019 ◽  
Vol 65 (374) ◽  
pp. 274-281 ◽  
Author(s):  
S. S. Satpute ◽  
S. R. Wadgane ◽  
S. R. Kadam ◽  
D. R. Mane ◽  
R. H. Kadam
Keyword(s):  
Electron Microscopy ◽  
Sol Gel ◽  
Electrical Characterization ◽  
Combustion Method ◽  
Hexagonal Structure ◽  
Strontium Hexaferrite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Studies ◽  
Auto Combustion

Abstract Y3+ substituted strontium hexaferrites having chemical composition SrYxFe12-xO19 (x= 0.0, 0.5, 1.0, 1.5) were successfully synthesized by sol-gel auto-combustion method. The structural and morphological studies of prepared samples were investigated by using X-ray diffraction technique, energy dispersive X-ray spectroscopy, field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy. The X-ray diffraction pattern confirmed the single-phase hexagonal structure of yttrium substituted strontium ferrite and the lattice parameters a and c increased with the substitution of Y3+ ions. The crystallite size also varied with x content from 60 to 80 nm. The morphology was studied by FE-SEM, and the grain size of nanoparticles ranged from 44 to 130 nm. The magnetic properties were investigated by using vibrating sample magnetometer. The value of saturation magnetization decreased from 49.60 to 35.40 emu/g. The dielectric constant decreased non-linearly whereas the electrical dc resistivity increased with the yttrium concentration in strontium hexaferrite.

scholarly journals Green synthesis and characterization of hexaferrite strontium-perovskite strontium photocatalyst nanocomposites

2020 ◽  
Vol 43 (1) ◽  
pp. 26-42 ◽  
Author(s):  
Zahra Hajian Karahroudi ◽  
Kambiz Hedayati ◽  
Mojtaba Goodarzi
Keyword(s):  
Magnetic Properties ◽  
Green Synthesis ◽  
Sol Gel ◽  
Synthesis Method ◽  
Combustion Method ◽  
Lemon Juice ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion

AbstractThis study presents a preparation of SrFe12O19– SrTiO3 nanocomposite synthesis via the green auto-combustion method. At first, SrFe12O19 nanoparticles were synthesized as a core and then, SrTiO3 nanoparticles were prepared as a shell for it to manufacture SrFe12O19–SrTiO3 nanocomposite. A novel sol-gel auto-combustion green synthesis method has been used with lemon juice as a capping agent. The prepared SrFe12O19–SrTiO3 nanocomposites were characterized by using several techniques to characterize their structural, morphological and magnetic properties. The crystal structures of the nanocomposite were investigated via X-ray diffraction (XRD). The morphology of SrFe12O19– SrTiO3 nanocomposite was studied by using a scanning electron microscope (SEM). The elemental composition of the materials was analyzed by an energy-dispersive X-ray (EDX). Magnetic properties and hysteresis loop of nanopowder were characterized via vibrating sample magnetometer (VSM) in the room temperature. Fourier transform infrared spectroscopy (FTIR) spectra of the samples showed the molecular bands of nanoparticles. Also, the photocatalytic behavior of nanocomposites has been checked by the degradation of azo dyes under irradiation of ultraviolet light.

Structural, morphological and magnetic properties of Mn2+ ions substituted nanosized nickel–copper–cobalt ferrites through sol–gel auto-combustion method

2019 ◽  
Vol 34 (01) ◽  
pp. 2050002
Author(s):  
Wei Zhang ◽  
Aimin Sun ◽  
Xiqian Zhao ◽  
Xiaoguang Pan ◽  
Yingqiang Han
Keyword(s):  
Magnetic Properties ◽  
Saturation Magnetization ◽  
Spinel Structure ◽  
Remanent Magnetization ◽  
Cobalt Ferrite ◽  
Sol Gel ◽  
Combustion Method ◽  
Magnetic Data ◽  
Nickel Copper ◽  
Auto Combustion

Manganese substituted nickel–copper–cobalt ferrite nanoparticles having the basic composition [Formula: see text] (x = 0.0, 0.1, 0.2, 0.3 and 0.4) were synthesized by sol–gel auto-combustion method. X-ray diffraction (XRD) was used to estimate phase purity and lattice symmetry. All the prepared samples show the single-phase cubic spinel structure. Fourier transform infrared (FTIR) measurements also confirm the cubic spinel structure of the ferrite that is formed. The preparation of samples show these nearly spherical particles by Transmission electron microscopy (TEM). The magnetic properties of Mn[Formula: see text] ion substituted in nickel–copper–cobalt ferrite were studied by Vibrating sample magnetometer (VSM). The saturation magnetization ([Formula: see text]), remanent magnetization [Formula: see text], coercivity [Formula: see text], magnetic moment [Formula: see text] and anisotropy constant [Formula: see text] first increase and then decrease with the increase of [Formula: see text] ions content. They had better magnetism than pure sample and other substituted samples when the substitution amount of [Formula: see text] ions was [Formula: see text]. At [Formula: see text], the maximum values of remanent magnetization [Formula: see text], saturation magnetization [Formula: see text] and coercivity [Formula: see text] are 25.58 emu/g, 61.95 emu/g and 689.76 Oe, respectively. This indicates that the magnetism of ferrite can improve by substituting with the appropriate amount of manganese. However, due to the excess [Formula: see text] ions instead, ferrite magnetism is weakened. This means that these materials can be used in magnetic data storage and recording media.

Effect of Annealing Temperature of CoCr2O4 on Structural and Vibrational Properties

2019 ◽  
Vol 11 (11) ◽  
pp. 1079-1081 ◽  
Author(s):  
Prachi Joshi ◽  
Pallavi Saxena ◽  
M. D. Varshney ◽  
V. N. Rai ◽  
A. Mishra
Keyword(s):  
Calcination Temperature ◽  
Sol Gel ◽  
Average Crystallite Size ◽  
Combustion Method ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
Auto Combustion ◽  
Different Temperatures ◽  
Disorder Effect ◽  
High Calcination Temperature

CoCr2O4 nanoparticles were prepared by low-temperature sol–gel auto combustion method. In this paper, we have investigated the structural behavior of CoCr2O4 nanoparticles annealed at two different temperatures (600 °C and 800 °C). From the X-ray diffraction (XRD) pattern of CoCr2O4, we have found that there is no change in crystalline structure and it was indexed in the cubic spinel structure with space group Fd3m. It was observed that average crystallite size increases with calcination temperature. High calcination temperature reduced the noise level and enhanced the accuracy of calculated parameters. For both the samples of CoCr2O4, we observed Raman scattering modes at around 471, 516, 539, 561, 590, 626 and 688 cm–1. The additional modes in vibrational spectra appear due to the disorder effect.

scholarly journals The influence of the chelating/combustion agents on the structure and magnetic properties of zinc ferrite

2012 ◽  
Vol 10 (6) ◽  
pp. 1799-1807 ◽  
Author(s):  
Tamara Slatineanu ◽  
Eliano Diana ◽  
Valentin Nica ◽  
Victor Oancea ◽  
Ovidiu Caltun ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Zinc Ferrite ◽  
Structural Parameters ◽  
Sol Gel ◽  
Magnetic Behavior ◽  
Combustion Method ◽  
Structural Features ◽  
Lattice Parameter ◽  
Zn Ferrite ◽  
Auto Combustion

AbstractThe present study is reporting the influence of the chelating/combustion agents on the magnetic properties of Zn ferrite. Six chelating/combustion agents, citric acid, egg white, tartaric acid, glycine, glucose and urea, were used to obtain monophase zinc nanoferrite via a sol-gel auto-combustion method. The samples were subjected to a comparative study of structural features and magnetic properties by means of infrared spectroscopy, X-ray diffractometry, scanning electron microscopy and vibrating sample magnetometry. Significant influence of fuel and combustion mode was observed in the magnetic behavior of as-obtained samples. Values of the structural parameters were discovered to vary as a function of fuel choice, and to obtain crystallite size between 38 and 62 nm, inversion degree between 0.239 and 0.807, lattice parameter between 8.4125 and 8.4432 Å. The optimization of sol-gel method synthesis of zinc ferrite nanoparticles by chosing the appropriate fuel is providing structural and magnetic properties of zinc nanoferrite as potential materials to be used in biomedical applications.

scholarly journals Structural, Optical, and Catalytic Properties of MgCr2O4 Spinel-Type Nanostructures Synthesized by Sol–Gel Auto-Combustion Method

Catalysts ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1476
Author(s):  
Vasyl Mykhailovych ◽  
Andrii Kanak ◽  
Ştefana Cojocaru ◽  
Elena-Daniela Chitoiu-Arsene ◽  
Mircea Nicolae Palamaru ◽  
...  
Keyword(s):  
Tartaric Acid ◽  
Catalytic Properties ◽  
Spinel Phase ◽  
Sol Gel ◽  
Combustion Method ◽  
Temperature Treatment ◽  
X Ray Diffraction ◽  
Spinel Type ◽  
X Ray ◽  
Auto Combustion

Spinel chromite nanoparticles are prospective candidates for a variety of applications from catalysis to depollution. In this work, we used a sol–gel auto-combustion method to synthesize spinel-type MgCr2O4 nanoparticles by using fructose (FS), tartaric acid (TA), and hexamethylenetetramine (HMTA) as chelating/fuel agents. The optimal temperature treatment for the formation of impurity-free MgCr2O4 nanostructures was found to range from 500 to 750 °C. Fourier transform infrared (FTIR) spectroscopy was used to determine the lattice vibrations of the corresponding chemical bonds from octahedral and tetrahedral positions, and the optical band gap was calculated from UV–VIS spectrophotometry. The stabilization of the spinel phase was proved by X-ray diffraction (XRD) and energy-dispersive X-ray (EDX) analysis. From field-emission scanning electron microscopy (FE-SEM), we found that the size of the constituent particles ranged from 10 to 40 nm. The catalytic activity of the as-prepared MgCr2O4 nanocrystals synthesized by using tartaric acid as a chelating/fuel agent was tested on the decomposition of hydrogen peroxide. In particular, we found that the nature of the chelating/fuel agent as well as the energy released during the auto-combustion played an important role on the structural, optical, and catalytic properties of MgCr2O4 nanoparticles obtained by this synthetic route.

Sign in / Sign up

Export Citation Format

Share Document