scholarly journals Deterioration Process of Concrete Exposed to Internal Sulfate Attack

Materials ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1336 ◽  
Author(s):  
Weifeng Chen ◽  
Bei Huang ◽  
Yuexue Yuan ◽  
Min Deng
Keyword(s):  
Compressive Strength ◽  
Sulfate Attack ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Great Loss ◽  
Sulfate Ions ◽  
Coarse Aggregates ◽  
Deterioration Process ◽  
One Year ◽  
Internal Sulfate Attack

Damage to concrete structures with gypsum-contaminated aggregate occurs frequently. Aggregates in much of the southern part of China are contaminated with gypsum. Therefore, in this study, the effects of using different quantities of gypsum-contaminated aggregate on the expansion and compressive strength of concrete were investigated over a period of one year. Two groups of concrete were designed with the gypsum-contaminated aggregate containing different parts of fine and coarse aggregate, respectively. The SO3 contents were 0%, 0.5%, 1%, 1.5%, 3%, 5%, and 7% by weight of aggregate. X-ray diffraction (XRD), thermogravimetry (TG), and differential scanning calorimetry (DSC) were used to analyze the change in mineral composition over time. The microstructure was also studied by scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The results showed that significant expansion and great loss in compressive strength did not occur in concrete if the content of SO3 lay below 1.5% and 3% in fine and coarse aggregates, respectively. The concentration of sulfate ions in concrete was not enough to form new a phase of gypsum. During the process of internal sulfate attack, the content of gypsum decreased and the content of ettringite increased. Ettringite was the main reason for the expansion damage of concrete. Additionally, the fracture mode of internal sulfate attack on concrete was the crack extension from gypsum to paste; finally, the aggregate separated from the paste.

Behaviors of Long-Term Exposure Concrete to Sulfate Solution

2011 ◽  
Vol 368-373 ◽  
pp. 790-794
Author(s):  
Shun Bo Zhao ◽  
Thomas C.K. Molyneaux ◽  
David W. Law ◽  
Yong Li ◽  
Li Yun Pan
Keyword(s):  
Compressive Strength ◽  
Sulfate Solution ◽  
Sulfate Attack ◽  
Sulfate Ions ◽  
Sulfate Solutions ◽  
Collaborative Studies ◽  
Diffusion Depth ◽  
One Year ◽  
The Uk

As a part of the collaborative studies between China, Australia and the UK, examing sulfate attack on concrete, this paper reports the experimental results obtained from the Chinese laboratory. Specimens were immersed in sodium and magnesium sulfate solutions with concentrations of 500mg/L, 5000mg/L and 50000mg/L. Investigations were conducted over approximately a one year period. Susceptibility to sulfate attack was assessed in terms of changes in the mass and length of specimens, the compressive strength of the concrete, as well as the diffusion depth of sulfate-ions into the concrete at fixed intervals. Several differences were observed between these results and those reported in studies from the UK laboratory.

scholarly journals Evaluation of external sulfate attack (Na2SO4 and MgSO4): Portland cement mortars containing siliceous supplementary cementitious materials

2020 ◽  
Vol 13 (4) ◽  
Author(s):  
Diego Jesus de Souza ◽  
Marcelo Henrique Farias de Medeiros ◽  
Juarez Hoppe Filho
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Cementitious Materials ◽  
Sulfate Attack ◽  
Supplementary Cementitious Materials ◽  
Hardened Cement ◽  
X Ray Diffraction ◽  
Sulfate Ions ◽  
Cement Mortars ◽  
Physical And Chemical

ABSTRACT: Sulfate attack is a term used to describe a series of chemical reactions between sulfate ions and hydrated compounds of the hardened cement paste. The present study aims to evaluate the physical (linear expansion, flexural and compressive strength) and mineralogical properties (X-ray diffraction) of three different mortar compositions (Portland Cement CPV-ARI containing silica fume and rice husk ash, in both cases with 10% replacement of the cement by weight) against sodium and magnesium sulfate attack (concentration of SO42- equal to 0.7 molar). The data collected indicate that the replacing the cement by the two siliceous supplementary cementitious materials (SCMs) generate similar results, both SCMs were able to mitigate the effects of the sodium sulfate attack in both physical and chemical characteristics, however, both materials increase the deterioration (i.e. compressive strength) when exposed to MgSO4 solution.

Accelerate Thaumasite Formation in Cement-Limestone Powder Paste by Internal Adding Method

2011 ◽  
Vol 250-253 ◽  
pp. 22-27 ◽  
Author(s):  
Chang Cheng Li ◽  
Yan Yao ◽  
Ling Wang
Keyword(s):  
Magnesium Sulfate ◽  
Sodium Sulfate ◽  
Calcium Sulfate ◽  
Sulfate Attack ◽  
Limestone Powder ◽  
Resonance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cement Based Materials ◽  
Internal Sulfate Attack

Cement-limestone powder pastes added with 10% magnesium sulfate, sodium sulfate, and calcium sulfate respectively were stored in water at (5±2) °C to accelerate thaumasite formation. The pastes were inspected visually at intervals. And the formation of thaumasite was identified and confirmed by X-ray diffraction (XRD), infrared spectroscopy (IR), and nuclear magnetic resonance spectroscopy (NMR). The results show that internal adding sulfate in cement-limestone powder paste is an efficient way to accelerate thaumasite formation, and the accelerated effect is magnesium sulfate> sodium sulfate> calcium sulfate. Cement-limestone paste containing 10% magnesium sulfate totally turns into grey-white mushy materials after 6 months immersion, and products are mainly thaumasite and gypsum. In addition, the amount of thaumasite increases along with time of internal sulfate attack in 15 months. XRD, IR, and NMR are powerful and reliable tools for identification of thaumasite in cement-based materials.

Study of Fine-Grained Composites Exposed to Sulfuric Acid and Sodium Sulfate

2016 ◽  
Vol 827 ◽  
pp. 275-278
Author(s):  
Martin Vyšvařil ◽  
Markéta Rovnaníková
Keyword(s):  
Waste Water ◽  
Sulfuric Acid ◽  
Sodium Sulfate ◽  
Sulfate Attack ◽  
Sewer Pipes ◽  
Sulfate Ions ◽  
Fine Grained ◽  
One Year ◽  
Corrosion Of Steel ◽  
Loss Of Strength

The degradation of concrete due to ingress of sulfate ions from the environment plays an important role in the durability of concrete constructions, especially in sewage collection systems where concrete sewer pipes are exposed to sulfates from waste water and from biogenic activity of bacteria. During this process the pH of the surface of concrete sewer pipes is reduced and it may lead to the steel depassivation and results in the corrosion of steel reinforcement. Damage due to sulfate interaction can result in the cracking and softening, with loss of strength of concrete. This paper is focused on the sulfate attack on fine-grained concrete where the effect of one-year contact of 0.5% H2SO4, and 5% Na2SO4 on changes of pH and content of sulfates in 7 types of concrete has been analyzed. It was found that after one year of sulfate attack on concrete, significant growth of content of sulfates is observed in the lowermost layer of the samples. Samples treated by 5% Na2SO4 contain slightly more sulfates in the upper layers than samples treated by sulfuric acid. The reduction in pH of aqueous leaches occurred in all layers of the samples. However, even in the lower layers of the samples, the reduction of pH below 9.5 did not turn up (except for SRS sample), and thus the conditions for the depassivation of reinforcement were not met.

scholarly journals Evaluation of external sulfate attack (Na2SO4 and MgSO4): Portland cement mortars containing fillers

2020 ◽  
Vol 13 (3) ◽  
pp. 644-655 ◽  
Author(s):  
D. J. DE SOUZA ◽  
M. H. F. MEDEIROS ◽  
J. HOPPE FILHO
Keyword(s):  
Portland Cement ◽  
Linear Expansion ◽  
Sulfate Attack ◽  
Hardened Cement ◽  
X Ray Diffraction ◽  
Limestone Filler ◽  
Sulfate Ions ◽  
X Ray ◽  
Cement Mortars ◽  
Physical And Chemical

Abstract Sulfate attack is a term used to describe a series of chemical reactions between sulfate ions and hydrated compounds of the hardened cement paste. The present study aims to evaluate the physical (linear expansion, flexural and compressive strength) and mineralogical properties (X-ray diffraction) of three different mortar compositions (Portland Cement CPV-ARI with limestone filler and, with a quartz filler, in both cases with 10% replacement of the cement by weight) against sodium and magnesium sulfate attack (concentration of SO4 2- equal to 0.7 molar). The data collected indicate that the replacing the cement by the two fillers generate different results, the quartz filler presented a mitigating behaviour towards the sulfate, and the limestone filler was harmful to Portland cement mortars, in both physical and chemical characteristics.

scholarly journals Evaluation of the SR Portland cement against sodium and magnesium sulfate attack: a physical and comparative analysis of mortars

2018 ◽  
Vol 11 (5) ◽  
pp. 1053-1075 ◽  
Author(s):  
D. J. de SOUZA ◽  
M. H. F. MEDEIROS ◽  
J. HOPPE FILHO
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Comparative Analysis ◽  
Chemical Composition ◽  
Magnesium Sulfate ◽  
Linear Expansion ◽  
Sulfate Attack ◽  
Hardened Cement ◽  
Hardened Cement Paste ◽  
Sulfate Ions

Abstract Sulfate attack is a term used to describe a series of chemical reactions between sulfate ions and hydrated compounds of the hardened cement paste. Thus, the chemical composition of the binders used is important for the durability of the structure against this aggressive agent. The objective of the present research is to evaluate the influence of sodium and magnesium sulfates on physical properties (linear expansion, flexure tensile strength, and compressive strength) of mortars composed by SR cement (CP V - ARI RS), as commercially sold in Brazil. The results indicate that SR cement complies the requirements established by Brazilian standards, as to chemical composition and resistance to sodium sulfate. However, for magnesium sulfate, SR cement was harmful to mortars mainly in mechanical.

scholarly journals Influence of internal sulfate attack on cement paste properties: contamination by pyrite

2021 ◽  
Vol 14 (6) ◽  
Author(s):  
Ana Paula Brandão Capraro ◽  
Juarez Hoppe Filho ◽  
Marcelo Henrique Medeiros
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Sulfate Attack ◽  
First Year ◽  
Cement Pastes ◽  
The One ◽  
Paste Properties ◽  
Internal Sulfate Attack

abstract: The objective of this work was to evaluate the influence of the presence of sulfate in the microstructure and compressive strength of cement pastes. The lack of availability of more suitable aggregates, for reasons of distance or costs, sometimes leads to the use of materials that contain sulfate in their composition, which is harmful to cement mixtures. Currently, there are normative recommendations that limit the content of contaminants in the aggregates. However, there are still divergences as to the content that does not damage the concrete. In order to discuss the levels presented in the standards and the values above those allowed by them, tests were carried out on cementitious compounds contaminated by pyrite in different levels of sulfates (0.0%, 0.5%, 1.0% and 5.0% of SO3). SEM, XRD, compressive strength, ultrasonic pulse velocity and porosity analyses were performed in samples at different ages until 720 days of age. During early ages until the first year, the most contaminated samples presented an increase in their strength (1.0% and 5.0% of SO3). This behavior was explained by SEM, XRD and porosity analyses by filling the pores with products of sulfate attack, such as ettringite. At the end of the tests (720 days) the series that presented the lowest compressive strength, the presence of cracks and large amounts of ettringite was the one that had 5.0% SO3 contamination, proving the importance of a normative limit content.

Glibenclamide-Nicotinamide Cocrystals Synthesized by The Solvent Evaporation Method to Enhance Solubility and Dissolution Rate of Glibenclamide

2019 ◽  
Vol 9 (01) ◽  
pp. 21-26
Author(s):  
Arif Budiman ◽  
Ayu Apriliani ◽  
Tazyinul Qoriah ◽  
Sandra Megantara
Keyword(s):  
Solvent Evaporation ◽  
Physical Mixture ◽  
Dissolution Profile ◽  
Solvent Evaporation Method ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Evaporation Method ◽  
Dissolution Properties ◽  
Mixture Characterization

Purpose: To develop glibenclamide-nicotinamide cocrystals with the solvent evaporation method and evaluate their solubility and dissolution properties. Methods: Cocrystals of glibenclamide-nicotinamide (1:2) were prepared with the solvent evaporation method. The prediction of interactive cocrystals was observed using in silico method. The solubility and dissolution were performed as evaluation of cocrystals. The cocrystals also were characterized by differential scanning calorimetry (DSC), infrared spectrophotometry, and powder X-ray diffraction (PXRD). Result: The solubility and dissolution profile of glibenclamide-nicotinamide cocrystal (1:2) increased significantly compared to pure glibenclamide as well as its physical mixture. Characterization of cocrystal glibenclamide-nicotinamide (1:2) including infrared Fourier transform, DSC, and PXRD, indicated the formation of a new solid crystal phase differing from glibenclamide and nicotinamide. Conclusion: The confirmation of cocrystal glibenclamide-nicotinamide (1:2) indicated the formation of new solid crystalline phases that differ from pure glibenclamide and its physical mixture

Studies on the Preparation, Characterization and Solubility of -Cyclodextrin-Roxythromycin Inclusion Complexes

2009 ◽  
Vol 2 (2) ◽  
pp. 523-530
Author(s):  
D. Nagasamy Venkatesh ◽  
S. Karthick ◽  
M. Umesh ◽  
G. Vivek ◽  
R.M. Valliappan ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Inclusion Complexes ◽  
Phase Solubility ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ir Studies ◽  
Poorly Soluble ◽  
Poorly Soluble Drug

Roxythromycin/ β-cyclodextrin (Roxy/ β-CD) dispersions were prepared with a view to study the influence of β-CD on the solubility and dissolution rate of this poorly soluble drug. Phase-solubility profile indicated that the solubility of roxythromycin was significantly increased in the presence of β-cyclodextrin and was classified as AL-type, indicating the 1:1 stoichiometric inclusion complexes. Physical characterization of the prepared systems was carried out by differential scanning calorimetry (DSC), X-ray diffraction studies (XRD) and IR studies. Solid state characterization of the drug β-CD binary system using XRD, FTIR and DSC revealed distinct loss of drug crystallinity in the formulation, ostensibly accounting for enhancement of dissolution rate.

Sign in / Sign up

Export Citation Format

Share Document