scholarly journals Heat-Treated Micronized Polyethylene Powder for Efficient Oil/Water Separating Filters

Materials ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3160
Author(s):  
Yasmin A. Mehanna ◽  
Colin R. Crick
Keyword(s):  
Separation Efficiency ◽  
Low Cost ◽  
High Water ◽  
Technical Solution ◽  
Water Separation ◽  
Fabrication Procedure ◽  
Potential Applications ◽  
Oil Water ◽  
Water Repellence ◽  
Polyethylene Powder

The targeted separation of oil/water mixtures is a rapidly growing field of research, mainly due to contaminated water becoming an increasingly important environmental issue. Superhydrophobic materials are highly suited to this application; however, growing efforts are being devoted to developing applicable technologies within a range of research communities. The optimal technical solution is one that combines a high separation efficiency with a straightforward fabrication procedure at a low cost. In this report, micronized polyethylene powder has been utilized as a low-cost hydrophobic material to manufacture easy-to-fabricate filters. The effect of heating and solvent addition on the water repellence behaviour has been investigated, according to which the optimum fabrication conditions were determined. The filters show high water repellence (WCA = 154°) and efficient oil/water separation (~99%). The filters are designed to provide a readily achievable approach for the separation of oils (hydrophobic solvents) from water in a range of potential applications.

scholarly journals Dodecyl Mercaptan Functionalized Copper Mesh for Water Repellence and Oil-water Separation

2021 ◽  
Vol 18 (4) ◽  
pp. 887-899
Author(s):  
Yanling Tian ◽  
Jiekai Feng ◽  
Zexin Cai ◽  
Jiaqi Chao ◽  
Dawei Zhang ◽  
...  
Keyword(s):  
Separation Efficiency ◽  
Synthesis Process ◽  
Water Separation ◽  
Oil Water Separation ◽  
One Step ◽  
Oil Water ◽  
Water Repellence ◽  
Copper Mesh ◽  
Dodecyl Mercaptan

AbstractReckless discharge of industrial wastewater and domestic sewage as well as frequent leakage of crude oil have caused serious environmental problems and posed severe threat to human survival. Various nature inspired superhy-drophobic surfaces have been successfully applied in oily water remediation. However, further improvements are still urgently needed for practical application in terms of facile synthesis process and long-term durability towards harsh environment. Herein, we propose a simple one-step dodecyl mercaptan functionalization method to fabricate Super-hydrophobic-Superoleophilic Copper Mesh (SSCM). The prepared SSCM possesses excellent water repellence and oil affinity, enabling it to successfully separate various oil-water mixtures with high separation efficiency (e.g., > 99% for hexadecane-water mixture). The SSCM retains high separating ability when hot water and strong corrosive aqueous solutions are used to simulate oil-water mixtures, indicating remarkable chemical durability of the dodecyl mercaptan functionalized copper mesh. Additionally, the efficiency can be well maintained during 50 cycles of separation, and the water repellence is even stable after storage in air for 120 days, demonstrating the reusability and long-term stability of the SSCM. Furthermore, the functionalized mesh also shows good mechanical robustness towards abrasion by sandpaper, and oil-water separation efficiency of > 96% can be obtained after 10 cycles of abrasion. The reported one-step dodecyl mercaptan functionalization could be a simple method for increasing the water repellence of copper mesh, and thereby be a great candidate for treating large-scale oily wastewater in harsh environments.

scholarly journals Fabricated of Superhydrophobic Silanized Melamine Sponge with Photochromic Properties for Efficiency Oil/Water Separation

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Peng Hong ◽  
Zhu Liu ◽  
Yang Gao ◽  
Yubin Chen ◽  
Mingxun Zhuang ◽  
...  
Keyword(s):  
Large Scale ◽  
Separation Efficiency ◽  
Low Cost ◽  
Water Repellency ◽  
Dip Coating ◽  
Absorption Capacity ◽  
Photochromic Properties ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water

Superhydrophobic sponge as potential absorbing material for oil/water separation is attracting great attention recently. However, there are still some challenges to feasibly fabricate superhydrophobic sponge with large scale and low cost. Herein, a novel photochromic superhydrophobic melamine sponge (PDMS-SP sponge) is fabricated by facilely dip-coating and thermocuring of hydroxyl-terminated polydimethylsiloxanes mixed with photochromic spiropyran. FT-IR, EDS, and XPS results confirm the successful coating of PDMS-SP upon melamine sponge. The resultant sponge not only possesses excellent water repellency with a contact angle of 154.5° and oil-water separation efficiency with an oil absorption capacity of 48–116 folds of itself weight, but also shows photochromic phenomenon between colorless and purple when it is successively exposed to UV irradiation and visible light.

scholarly journals Robust and continuous oil/water separation with superhydrophobic glass microfiber membrane by vertical polymerization under harsh conditions

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Seeun Woo ◽  
Hong Ryul Park ◽  
Jinyoung Park ◽  
Johan Yi ◽  
Woonbong Hwang
Keyword(s):  
Low Cost ◽  
Three Dimensional ◽  
High Water ◽  
Alkaline Solutions ◽  
Oxygen Plasma Treatment ◽  
Membrane Thickness ◽  
Water Separation ◽  
Wide Range ◽  
Oil Water Separation ◽  
Oil Water

AbstractWe report a robust and continuous oil/water separation with nanostructured glass microfiber (GMF) membranes modified by oxygen plasma treatment and self-assembled monolayer coating with vertical polymerization. The modified GMF membrane had a nanostructured surface and showed excellent superhydrophobicity. With an appropriate membrane thickness, a high water intrusion pressure (< 62.7 kPa) was achieved for continuous pressure-driven separation of oil/water mixtures with high flux (< 4418 L h−1 m−2) and high oil purity (> 99%). Under simulated industrial conditions, the modified GMF membrane exhibited robust chemical stability against strong acidic/alkaline solutions and corrosive environments. The proposed superhydrophobic composite coating technique is simple, low cost, environmentally friendly, and suitable for the mass production of scalable three-dimensional surfaces. Moreover, its stability and customizable functionality offers considerable potential for a wide range of novel applications.

scholarly journals Superhydrophobic PDMS-pCA@CNWF Composite with UV-Resistant and Self-Cleaning Properties for Oil/Water Separation

Materials ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 376
Author(s):  
Hanyu Wen ◽  
Yu-I Hsu ◽  
Hiroshi Uyama
Keyword(s):  
High Efficiency ◽  
Separation Efficiency ◽  
Oil Pollution ◽  
Low Cost ◽  
Woven Fabric ◽  
Water Separation ◽  
Oil Separation ◽  
Practical Applications ◽  
Oil Water ◽  
Self Cleaning

Oil separation is crucial for avoiding environmental pollution originating from industrial wastewater and oil spillage; therefore, it is essential to develop techniques for oil separation. Herein, a new membrane with superhydrophilicity was synthesized by a facile, green, and low-cost method. First, cellulose non-woven fabric (CNWF) was modified by poly (catechin) (pCA), which has good antioxidant and antibacterial activities, to make it unaffected by ultraviolet light and to improve the stability of the structure. Then, hydrolyzed polydimethylsiloxane (PDMS) was coated on the pCA@CNWF surface via chemical bonding to make the composite hydrophobic. This durable superhydrophobic fabric can be used to separate various oil/water mixtures by gravity-driven forces with high separation efficiency (over 98.9%). Additionally, the PDMS-pCA@CNWF possesses the advantages of flexibility, high efficiency, and an outstanding self-cleaning performance, and demonstrates significant potential for applications in various environments, even under various harsh conditions, which make it very promising for the treatment of oil pollution in practical applications.

scholarly journals Mussel-Inspired Fabrication of PDA@PAN Electrospun Nanofibrous Membrane for Oil-in-Water Emulsion Separation

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3434
Author(s):  
Haodong Zhao ◽  
Yali He ◽  
Zhihua Wang ◽  
Yanbao Zhao ◽  
Lei Sun
Keyword(s):  
Separation Efficiency ◽  
Low Cost ◽  
Nanofibrous Membrane ◽  
Water Separation ◽  
Water Emulsion ◽  
Oil In Water ◽  
Emulsion Separation ◽  
Oil Water Separation ◽  
Oil Water ◽  
Oil In Water Emulsion

Emulsified oily wastewater threatens human health seriously, and traditional technologies are unable to separate emulsion containing small sized oil droplets. Currently, oil–water emulsions are usually separated by special wettability membranes, and researchers are devoted to developing membranes with excellent antifouling performance and high permeability. Herein, a novel, simple and low-cost method has been proposed for the separation of emulsion containing surfactants. Polyacrylonitrile (PAN) nanofibers were prepared via electrospinning and then coated by polydopamine (PDA) by using self-polymerization reactions in aqueous solutions. The morphology, structure and oil-in-water emulsion separation properties of the as-prepared PDA@PAN nanofibrous membrane were tested. The results show that PDA@PAN nanofibrous membrane has superhydrophilicity and almost no adhesion to crude oil in water, which exhibits excellent oil–water separation ability. The permeability and separation efficiency of n-hexane/water emulsion are up to 1570 Lm−2 h−1 bar−1 and 96.1%, respectively. Furthermore, after 10 cycles of separation, the permeability and separation efficiency values do not decrease significantly, indicating its good recycling performance. This research develops a new method for preparing oil–water separation membrane, which can be used for efficient oil-in-water emulsion separation.

Fabrication of hydrophobic NiFe2O4@poly(DVB-LMA) sponge via Pickering emulsion template method for oil/water separation

Soft Matter ◽  
2021 ◽  
Author(s):  
Caimei Zhao ◽  
Lei Chen ◽  
Chuanming Yu ◽  
Binghua Hu ◽  
Haoxuan Huang ◽  
...  
Keyword(s):  
Oil Spills ◽  
Low Cost ◽  
Pickering Emulsion ◽  
Template Method ◽  
Water Separation ◽  
Environment Friendly ◽  
Oil Water Separation ◽  
Oil Water ◽  
Cost Efficient

Super-hydrophobic porous absorbent is a convenient, low-cost, efficient and environment-friendly material in the treatment of oil spills. In this work, a simple Pickering emulsion template method was employed to fabricate...

A facile fabrication of superhydrophobic and superoleophilic adsorption material 5A zeolite for oil–water separation with potential use in floating oil

Open Physics ◽  
2021 ◽  
Vol 19 (1) ◽  
pp. 486-493
Author(s):  
Ting Liang ◽  
Biao Wang ◽  
Zhenzhong Fan ◽  
Qingwang Liu
Keyword(s):  
Separation Efficiency ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Water Mixture ◽  
Water Separation ◽  
Oil Sorbent ◽  
Analysis Experiment ◽  
5A Zeolite ◽  
Oil Water ◽  
Potential Use

Abstract A facile method for fabricating superhydrophobic and superoleophilic powder with 5A zeolite and stearic acid (SA) is reported in this study. The effect of different contents of SA on contact angle (CA) was investigated. The maximum water CA was 156.2°, corresponding to the optimum SA content of 1.5 wt%. The effects of SA and the mechanism of modified 5A zeolite powder by SA were analyzed by sedimentation analysis experiment, FTIR analysis, particle size analysis, and SEM characterization. The SA-modified 5A zeolite was used as an oil sorbent to separate oil–water mixture with potential use in floating oil. The separation efficiency was above 98%.

Design and fabrication of polydopamine based superhydrophobic fabrics for efficient oil-water separation

Soft Matter ◽  
2021 ◽  
Author(s):  
Jixi Zhang ◽  
Ligui Zhang ◽  
Xiao Gong
Keyword(s):  
Contact Angle ◽  
Water Contact Angle ◽  
Sol Gel ◽  
High Water ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water ◽  
Fabric Surface

In this work, we prepare a PDMS-SiO2-PDA@fabric with high water contact angle (WCA=155o). Combining dopamine self-polymerization and sol-gel method, SiO2 is in situ grown on a PDA-modified fabric surface to...

scholarly journals A Facile Route to Fabricate Superhydrophobic Cu2O Surface for Efficient Oil–Water Separation

Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 659 ◽  
Author(s):  
Sheng Lei ◽  
Xinzuo Fang ◽  
Fajun Wang ◽  
Mingshan Xue ◽  
Junfei Ou ◽  
...  
Keyword(s):  
Low Cost ◽  
Environmental Safety ◽  
Water Separation ◽  
Short Reaction Time ◽  
Oil Water Separation ◽  
Oil Water ◽  
High Separation ◽  
Application Prospects ◽  
Copper Mesh ◽  
Facile Route

The mixture of insoluble organics and water seriously affects human health and environmental safety. Therefore, it is important to develop an efficient material to remove oil from water. In this work, we report a superhydrophobic Cu2O mesh that can effectively separate oil and water. The superhydrophobic Cu2O surface was fabricated by a facile chemical reaction between copper mesh and hydrogen peroxide solution without any low surface reagents treatment. With the advantages of simple operation, short reaction time, and low cost, the as-synthesized superhydrophobic Cu2O mesh has excellent oil–water selectivity for many insoluble organic solvents. In addition, it could be reused for oil–water separation with a high separation ability of above 95%, which demonstrated excellent durability and reusability. We expect that this fabrication technique will have great application prospects in the application of oil–water separation.

scholarly journals Surface Engineering of Ceramic Nanomaterials for Separation of Oil/Water Mixtures

2020 ◽  
Vol 8 ◽  
Author(s):  
Usama Zulfiqar ◽  
Andrew G. Thomas ◽  
Allan Matthews ◽  
David J. Lewis
Keyword(s):  
Surface Engineering ◽  
Oil Spills ◽  
Chemical Interaction ◽  
Low Cost ◽  
Water Mixture ◽  
Water Separation ◽  
Manufacturing Operations ◽  
Industrial Oil ◽  
Oil Water Separation ◽  
Oil Water

Oil/water mixtures are a potentially major source of environmental pollution if efficient separation technology is not employed during processing. A large volume of oil/water mixtures is produced via many manufacturing operations in food, petrochemical, mining, and metal industries and can be exposed to water sources on a regular basis. To date, several techniques are used in practice to deal with industrial oil/water mixtures and oil spills such as in situ burning of oil, bioremediation, and solidifiers, which change the physical shape of oil as a result of chemical interaction. Physical separation of oil/water mixtures is in industrial practice; however, the existing technologies to do so often require either dissipation of large amounts of energy (such as in cyclones and hydrocyclones) or large residence times or inventories of fluids (such as in decanters). Recently, materials with selective wettability have gained attention for application in separation of oil/water mixtures and surfactant stabilized emulsions. For example, a superhydrophobic material is selectively wettable toward oil while having a poor affinity for the aqueous phase; therefore, a superhydrophobic porous material can easily adsorb the oil while completely rejecting the water from an oil/water mixture, thus physically separating the two components. The ease of separation, low cost, and low-energy requirements are some of the other advantages offered by these materials over existing practices of oil/water separation. The present review aims to focus on the surface engineering aspects to achieve selectively wettability in materials and its their relationship with the separation of oil/water mixtures with particular focus on emulsions, on factors contributing to their stability, and on how wettability can be helpful in their separation. Finally, the challenges in application of superwettable materials will be highlighted, and potential solutions to improve the application of these materials will be put forward.

Sign in / Sign up

Export Citation Format

Share Document