scholarly journals Accuracy of Dental Implant Placement by a Novel In-House Model-Free and Zero-Setup Fully Guided Surgical Template Made of a Light-Cured Composite Resin (VARO Guide®): A Comparative In Vitro Study

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4023
Author(s):  
Young-Woo Song ◽  
Jong-Seung Kim ◽  
Jang-Hyun Kim ◽  
Ji-Man Park ◽  
Ui-Won Jung ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Vitro Study ◽  
Procedure Time ◽  
Preparation Time ◽  
Implant Surgery ◽  
Surgical Guide ◽  
Total Procedure Time ◽  
Significant Difference ◽  
Total Procedure

Background: This in vitro study mainly aimed to compare VARO Guide® to the surgical guide fabricated by CAD/CAM (NAVI Guide®) in terms of accuracy and efficacy of the implant surgery held in the dentiform model. Methods: Twenty surgeons, 10 dentists in the beginner group and 10 dentists in the expert group, participated in the study. Each surgeon conducted fully guided surgery in dentiform models twice, once with VARO Guide® (VG surgery) and the other time with a conventional type of templates, NAVI Guide® (NG surgery). Based on the superimposition of presurgical and postsurgical STL files, the positional deviations between the virtually planned and actually placed implants and the time spent on presurgical preparation and surgical procedures were estimated and compared. Results: All dimensional deviations were similar between the two groups (p > 0.05), and there was no significant difference between the expert and beginner groups regardless of the guide system. The total procedure time (mean (median)) of the VG surgery (26.33 (28.58) min) was significantly shorter than that of the NG surgery (378.83 (379.35) min; p < 0.05). While the time spent only for the fully guided implant surgery (from the start of the surgical guide sitting onto the dentiform model to the final installation of the implant fixture) was comparable (p > 0.05), the presurgical preparation time spent on virtual implant planning and surgical guide fabrication in the VG surgery (19.63 (20.93) min) was significantly shorter compared to the NG surgery (372.93 (372.95) min; p < 0.05). Conclusions: Regardless of experience, both VG and NG surgery showed reliable positional accuracy; however, the total procedure time and the preparation time were much shorter in the VG surgery compared to the NG surgery.

Accuracy of Different Surgical Guide Designs for Static Computer-Assisted Implant Surgery: An in vitro Study

2021 ◽  
Author(s):  
Yu Tsung Wu ◽  
Panos Papaspyridakos ◽  
Kiho Kang ◽  
Matthew Finkelman ◽  
Yukio Kudara ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Vitro Study ◽  
Computer Assisted ◽  
Surgical Guide ◽  
Implant Placement ◽  
Surgical Guides ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2

The aims of this study were to evaluate the effect of (i) the different surgical guide designs and (ii) implant placement location on the accuracy of fully guided implant placement in single edentulous sites using an in vitro study model. Forty-five partially edentulous models were scanned and divided into three groups: group 1, tooth-supported full-arch surgical guide; group 2, three different tooth-supported shortened surgical guides (SSGs); and group 3, tooth-supported full-arch surgical guide with a crossbar. All surgical guides were printed and used for fully guided implant placement. A total of 180 implants (60 per group) were placed, and scanbodies were positioned on all models, and postoperative surface scan files (STL) files were obtained. Superimposition of preoperative and postoperative STL files was performed, and the accuracy of implant position was evaluated. The interaction between group and implant location was statistically significant for angle, 3D offset at the base, and at the tip (p&lt;0.001). The post-hoc tests showed a statistically significantly higher deviation for group 2 compared to group 3 for all outcomes for implants #4 (p&lt;0.05) and #7 (p&lt;0.05). There was also a statistically significant difference in all outcomes between groups 1 and 3 for implant #7 (p&lt;0.05). All surgical guide designs presented satisfactory performance with clinically acceptable levels of deviation. However, SSGs presented higher accuracy for guided implant placement in a single-edentulous site, whereas a full-arch surgical guide with a crossbar presented superior outcomes when two or more guided implants were placed simultaneously.

scholarly journals Accuracy of implant surgery with surgical guide by inexperienced clinicians: an in vitro study

2015 ◽  
Vol 1 (1) ◽  
pp. 10-17 ◽  
Author(s):  
Takeshi Toyoshima ◽  
Hideaki Tanaka ◽  
Masanori Sasaki ◽  
Eiji Ichimaru ◽  
Yasushi Naito ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Vitro Study ◽  
Implant Surgery ◽  
Surgical Guide

scholarly journals Marginal and Internal Fit of Ceramic Prostheses Fabricated from Different Chairside CAD/CAM Systems: An In Vitro Study

2021 ◽  
Vol 11 (2) ◽  
pp. 857
Author(s):  
Keunbada Son ◽  
Kyu-Bok Lee
Keyword(s):  
Computer Aided Design ◽  
In Vitro Study ◽  
Vitro Study ◽  
Marginal Gap ◽  
Significant Difference ◽  
Cad Cam ◽  
Ceramic Crowns ◽  
Internal Fit ◽  
Cam Systems

The purpose of this in vitro study was to evaluate marginal and internal fits of ceramic crowns fabricated with chairside computer-aided design and manufacturing (CAD/CAM) systems. An experimental model based on ISO 12836:2015 was digitally scanned with different intraoral scanners (Omnicam (CEREC), EZIS PO (DDS), and CS3500 (Carestream)). Ceramic crowns were fabricated using the CAD/CAM process recommended by each system (CEREC, EZIS, and Carestream systems; N = 15). The 3-dimensional (3D) marginal and internal fit of each ceramic crown was measured using a 3D inspection software (Geomagic control X). Differences among the systems and various measurements were evaluated using the Kruskal–Wallis test. Statistically significant differences were validated using pairwise comparisons (α = 0.05). Occlusal gaps in the CEREC, EZIS, and Carestream groups were 113.0, 161.3, and 438.2 µm, respectively (p < 0.001). The axial gaps were 83.4, 78.0, and 107.9 µm, respectively. The marginal gaps were 77.8, 99.3, and 60.6 µm, respectively, and the whole gaps were 85.9, 107.3, and 214.0 µm, respectively. Significant differences were observed with the EZIS system compared with the other two systems in terms of the marginal gap sizes. The CEREC system showed no significant differences among the four measured regions. However, the EZIS and Carestream systems did show a statistically significant difference (p < 0.05). All three systems were judged to be capable of fabricating clinically acceptable prostheses, because the marginal gap, which is the most important factor in the marginal fit of prostheses, was recorded to be below 100 µm in all three systems.

The influence of crown coverage on the accuracy of static guided implant surgery in partially edentulous models: an in vitro study

2021 ◽  
pp. 103882
Author(s):  
Zhen-yu Wang ◽  
Jia-rui Chao ◽  
Jia-wen Zheng ◽  
Meng You ◽  
Yang Liu ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Vitro Study ◽  
Implant Surgery

scholarly journals THE EFFECT OF CURCUMA XANTHORRHIZA ETHANOL EXTRACT ON THE VIABILITY OF STREPTOCOCCUS MUTANS AND AGGREGATIBACTER ACTINOMYCETEMCOMITANS (DENTAL BIOFILM RESEARCH: IN VITRO STUDY)

2017 ◽  
Vol 10 (17) ◽  
pp. 30
Author(s):  
Royan Diana ◽  
Hedijanti Joenoes ◽  
Ariadna A Djais
Keyword(s):  
Streptococcus Mutans ◽  
In Vitro Study ◽  
Ethanol Extract ◽  
Single Species ◽  
Aggregatibacter Actinomycetemcomitans ◽  
Vitro Study ◽  
Dental Biofilm ◽  
Significant Difference ◽  
Curcuma Xanthorrhiza

Objective: This study aimed to compare the effect of Curcuma xanthrorrhiza ethanol extract to the viability of Streptococcus mutans and Aggregatibacter  actinomycetemcomitans using single- and dual-species biofilm at different phases of formation.Methods: Biofilm models were incubated for 4, 12, and 24 hrs, then exposed to the extract at a concentration of 0.525%.Results: The viability of the single-species S. mutans biofilm was low (p<0.05), and no significant difference (p>0.05) was found between singlespeciesA. actinomycetemcomitans and dual-species biofilm.Conclusions: Curcuma xanthorrhiza ethanol extract is more effective for decreasing the viability of single-species S. mutans biofilm.

scholarly journals Bond Strength Evaluation of Inlay-Retained Resin-Bonded Fixed Partial Dentures with Two Different Cavity Designs and Two Different Adhesive Systems: In Vitro Study

2020 ◽  
Vol 24 (1) ◽  
pp. 21-28
Author(s):  
Ediz Kale ◽  
Ayça Deniz İzgi ◽  
Remzi Niğiz
Keyword(s):  
Bond Strength ◽  
In Vitro Study ◽  
Adhesive System ◽  
Vitro Study ◽  
Aqueous Environment ◽  
Cement Interface ◽  
Significant Difference ◽  
Mode Of Failure ◽  
Slot Cavity

SummaryBackground/Aim: The purpose of this in-vitro study was to compare the resin-bonded fixed partial dentures (RBFPD) fabricated using two different structural designs and two different antibacterial adhesive lutting protocols in regard to their resistance to debonding.Material and Methods: Forty samples for a model with single missing molar were divided into 4 groups (M1, M2, C1, C2) (n=10). M1 and M2 were prepared in accordance with modified inlay slot-cavity retained RBFPD design; C1 and C2 were prepared according to conventional inlay slot-cavity retained RBFPD design. M1 and C1 cavities were treated with 2% chlorhexidine-based (CHX) cavity disinfectant and 10-methacryloyloxydecyl dihydrogen phosphate (MDP) containing adhesive system; M2 and C2 cavities were treated with MDP and 12-methacryloyloxydodecylpyridinium bromide (MDPB) containing adhesive system featuring antibacterial cavity cleansing effect. The RBFPDs were made of base-metal alloy and their fit surfaces sandblasted with aluminium oxide (Al2O3). Adhesive resin cement was used for cementation, and the RBFPD retainers were interlocked into their corresponding inlay cavities using composite resin. After 1 week being immersed in aqueous environment, the RBFPDs were subjected to tensile loading at a crosshead speed of 1 mm/min until failure. One way ANOVA and Tukey HSD tests were used for statistical evaluation (α=0.05). Mode of failure and tooth damage was also noted.Results: Mean tensile bond strength values were 356 N for M1, 305 N for M2, 467 N for C1, and 455 N for C2. Tensile strength values of C1 and C2 were significantly higher than those of M1 and M2 (p<0.05). The mode of failure was mostly adhesive in character at the metal-cement interface in all groups. Tooth fracture was observed nearly in all specimens. No significant difference was detected between the antibacterial adhesive lutting protocols (p>0.05).Conclusions: The RBFPDs with the conventional design were found to be more retentive than those with the modified design. Using an adhesive system featuring antibacterial properties with no need of separate antibacterial agent application during bonding may be favourable.

scholarly journals Feasibility of 3-Dimensional Visual Guides for Preparing Pediatric Zirconia Crowns: An In Vitro Study

2020 ◽  
Vol 17 (16) ◽  
pp. 5732
Author(s):  
Ho Yeon Kang ◽  
Hyeonjong Lee ◽  
Yong Kwon Chae ◽  
Seoung-Jin Hong ◽  
Yun Yeong Jeong ◽  
...  
Keyword(s):  
Three Dimensional ◽  
In Vitro Study ◽  
Mixed Dentition ◽  
Preparation Time ◽  
Second Molar ◽  
Significant Difference ◽  
Distal Surface ◽  
Zirconia Crowns ◽  
Tooth Preparation

This study evaluated the feasibility of a tooth preparation guide for prefabricated zirconia crowns (PZCs). Three-dimensional surface data for PZCs of the left maxillary primary first molar and left mandibular primary second molar were obtained using a model scanner. The tooth preparation data were digitally designed to harmonize with the adjacent teeth on the mixed dentition model and visualized using a color-coded map, which presents the required amount of tooth reduction. Twenty participants were recruited for preparing teeth with and without using the tooth preparation guide. The following three parameters were evaluated: tooth preparation time, harmony score, and amount of tooth reduction. The preparation time when using the guide was significantly reduced (p < 0.05), and a significant difference was observed in the harmony scores for the maxillary primary first molar preparation. Furthermore, the amount of tooth reduction was significantly different for both maxillary and mandibular primary molars (p < 0.05) in terms of the occlusal distal surface and buccal line angle in the maxillary primary first molars, and the smooth surfaces, proximal surfaces, and mesial line angles in the mandibular primary second molars. Thus, the results suggest that a tooth preparation guide could facilitate better tooth preparation for PZCs.

scholarly journals ANTIPLAQUE EFFICACY OF GANODERMA LUCIDUM TOOTHPASTE - AN IN VITRO STUDY

2018 ◽  
Vol 11 (11) ◽  
pp. 300
Author(s):  
Prabhjeet S ◽  
Meena A K ◽  
Jesil M
Keyword(s):  
Tissue Culture ◽  
Ganoderma Lucidum ◽  
In Vitro Study ◽  
Vitro Study ◽  
Distilled Water ◽  
Culture Plate ◽  
Significant Difference ◽  
Tissue Culture Plate

Objective: The objective of the study was to evaluate the efficacy of Ganoderma lucidum toothpaste as an antiplaque agent and to compare its efficacy with herbal toothpaste and mouthwash.Methods: Pooled saliva was collected in a sterile container from the volunteers after taking the consent. Tissue culture plate with 12 (3 × 4) wells was chosen. Pooled saliva of 20 mL was added to each well using the micropipette and was kept in the incubator at 37°C for 72 h. After 72 h, saliva was removed without touching the walls or the base of the wells. Each row was treated either with slurry prepared with Ganoderma/herbal/Colgate total toothpaste or herbal/chlorhexidine mouthwash/distilled water. One row of wells was kept as a control using erythrosine dye. After 30 s, all the wells were rinsed with distilled water. Erythrosine dye was added to all the wells, kept for 30 s, and rinsed with distilled water. The tissue culture plate was kept in the ELx800MS machine (ELISA reader) which was set at 540 nm, and the readings were obtained.Results: The results showed that G. lucidum toothpaste slurry reduced plaque than herbal and chlorhexidine mouthwash. However, there was no significant difference in plaque reduction between herbal and G. lucidum toothpaste slurries.Conclusion: The present study concluded that G. lucidum had better antiplaque efficacy than herbal toothpaste, herbal mouthwash, and chlorhexidine mouthwash.

scholarly journals To Evaluate the Marginal Fit of Metal Copings Fabricated by Conventional Casting Procedure and Direct Metal Laser Sintering Technology – an In Vitro Study

2017 ◽  
Vol 05 (01) ◽  
pp. 039-046 ◽  
Author(s):  
Monica Sharma ◽  
Ajay Bansal ◽  
Sunny Panthi ◽  
Shefali Malik ◽  
Atulya Sharma
Keyword(s):  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Laser Sintering ◽  
Vitro Study ◽  
Direct Metal Laser Sintering ◽  
Marginal Fit ◽  
Significant Difference ◽  
Group A ◽  
Group B

Abstract Purpose: The purpose of this in vitro study was to evaluate marginal fit of cobalt- chromium (Co-Cr) copings fabricated by direct metal laser sintering system (DMLS) and conventional lost-wax technique (LW). Materials and method: Forty tooth preparations were carried out over extracted mandibular molars. They were divided into two groups A and B of 20 each. For group A Co-Cr copings were fabricated by direct metal laser sintering (DMLS) and for group B by lost wax technique (LW). Glass –ionomer cement (GIC) was used to tack the copings over their preparations. Marginal fit was then evaluated directly under the stereomicroscope. Results: The mean marginal gap of group A was 27.9 ± 2.4 μm and group B was 40.4 ±6 μm. Statistical analysis using t - test showed highly significant difference (P>.05) between the marginal mean of the DMLS (group A) compared to LW (group B). Conclusion: The DMLS copings demonstrated superior marginal fit compared to that of conventional Co-Cr casted copings.

Sign in / Sign up

Export Citation Format

Share Document