scholarly journals Improvement in NO2 Gas Sensing Properties of Semiconductor-Type Sensors by Loading Pt into BiVO4 Nanocomposites at Room Temperature

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 5913
Author(s):  
Wang-De Lin ◽  
Shu-Yun Lin ◽  
Murthy Chavali
Keyword(s):  
Recovery Time ◽  
Gas Sensing ◽  
Fast Response ◽  
X Ray Diffraction ◽  
X Ray ◽  
Response Recovery ◽  
Transmission Electron ◽  
Surface Morphologies ◽  
Sensing Characteristics ◽  
Semiconductor Type

In the present study, we report the first attempt to prepare a conducive environment for Pt/BiVO4 nanocomposite material reusability for the promotion of sustainable development. Here, the Pt/BiVO4 nanocomposite was prepared using a hydrothermal method with various weight percentages of platinum for use in NO2 gas sensors. The surface morphologies and structure of the Pt/BiVO4 nanocomposite were characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). The results showed that Pt added to BiVO4 with 3 wt.% Pt/BiVO4 was best at a concentration of 100 ppm NO2, with a response at 167.7, and a response/recovery time of 12/35 s, respectively. The Pt/BiVO4 nanocomposite-based gas sensor exhibits promising nitrogen dioxide gas-sensing characteristics, such as fast response, highly selective detection, and extremely short response/recovery time. Additionally, the mechanisms of gas sensing in Pt/BiVO4 nanocomposites were explored in this paper.

scholarly journals Liquid petroleum gas sensing performance enhanced by CuO modification of nanocrystalline ZnO-TiO2

2016 ◽  
Vol 34 (3) ◽  
pp. 571-581
Author(s):  
R.B. Pedhekar ◽  
F.C. Raghuwanshi ◽  
V.D. Kapse
Keyword(s):  
Thick Film ◽  
Gas Sensing ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molar Ratios ◽  
Transmission Electron ◽  
Liquid Petroleum Gas ◽  
Synthesized Materials ◽  
Sensing Characteristics

AbstractNanocrystalline ZnO-TiO2 (with molar ratios 9:1, 7:3, 1:1, 3:7 and 1:9) were successfully synthesized by hydrothermal method. Synthesized materials were examined with the help of X-ray diffraction and transmission electron microscope. Liquid petroleum gas sensing characteristics of the ZnO-TiO2 films were investigated at different operating temperatures. The ZnO-TiO2 thick film (with 1:1 molar ratio) exhibited good response toward liquid petroleum gas as compared to other investigated compositions. Further, liquid petroleum gas sensing characteristics of CuO modified ZnO-TiO2 thick films were investigated. 0.2 M CuO modified ZnO-TiO2 thick film exhibited excellent liquid petroleum gas sensing characteristics such as higher response (~ 1637.49 at 185 °C) with quick response time (~30 s), low recovery time (~70 s), excellent repeatability and stability at low operating temperature.

scholarly journals Highly sensitive and selective sensing of H2S gas using precipitation and impregnation-made CuO/SnO2 thick films

2021 ◽  
Author(s):  
Pimpan Leangtanom ◽  
Anurat Wisitsoraat ◽  
Kata Jaruwongrangsee ◽  
Narong Chanlek ◽  
Adisorn Tuantranont ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Fast Response ◽  
Potential Candidate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cu Content ◽  
Transmission Electron ◽  
Highly Sensitive

Abstract In this work, CuO-loaded tetragonal SnO2 nanoparticles (CuO/SnO2 NPs) were synthesized using precipitation/impregnation methods with varying Cu contents of 0–25 wt% and characterized for H2S detection. The material phase, morphology, chemical composition and specific surface area of NPs were evaluated using X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller analysis. From gas-sensing data, the H2S responses of SnO2 NPs were greatly enhanced by CuO loading particularly at the optimal Cu content of 20 wt%. The 20 wt%CuO/SnO2 sensor showed an excellent response of 1.36⋅105 towards 10 ppm H2S and high H2S selectivity against H2, SO2, CH4 and C2H2 at a low optimum working temperature of 200°C. In addition, the sensor provided fast response and a low detection limit of less than 0.15 ppm. The CuO-SnO2 sensor could therefore be a potential candidate for H2S detection in environmental applications.

Au-sensitized WO3 nanoparticles synthesized and their enhanced acetone sensing properties

2018 ◽  
Vol 11 (04) ◽  
pp. 1850071 ◽  
Author(s):  
Dongping Xue ◽  
Zhanying Zhang
Keyword(s):  
Recovery Time ◽  
Gas Sensing ◽  
Test Results ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sensing Properties ◽  
Response Recovery ◽  
Two Samples ◽  
Gas Sensing Properties ◽  
Scanning Electron

Au-sensitized WO3 nanoparticles have been synthesized by a facile two-step hydrothermal method. The structures, morphologies and surface compositions of the materials were characterized by X-ray diffraction (XRD), energy dispersive spectroscopy (EDS) and scanning electron microscopy (SEM). The test results show that we have prepared higher purity Au-sensitized WO3 nanoparticles. The gas-sensing properties of pure and Au-sensitized WO3 nanoparticles on acetone vapor were further investigated. The results obtained show that the response-recovery time of the two samples prepared is relatively short compared to that reported in the current literature. The Au-sensitized WO3 nanoparticles are significantly more sensitive and selective than the pure WO3 nanoparticles. This may be mainly attributed to the synergy between Au and WO3. It is expected that the Au-sensitized WO3 nanoparticles thus prepared can also be used for research in other fields.

scholarly journals Effects of Niobium-Loading on Sulfur Dioxide Gas-Sensing Characteristics of Hydrothermally Prepared Tungsten Oxide Thick Film

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Viruntachar Kruefu ◽  
Anurat Wisitsoraat ◽  
Sukon Phanichphant
Keyword(s):  
Spin Coating ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Sensor Response ◽  
X Ray Diffraction ◽  
Optimal Operating ◽  
Impregnation Process ◽  
X Ray ◽  
Transmission Electron ◽  
Sensing Characteristics

Nb-loaded hexagonal WO3nanorods with 0–1.0 wt% loading levels were successfully synthesized by a simple hydrothermal and impregnation process and characterized for SO2sensing. Nb-loaded WO3sensing films were produced by spin coating on alumina substrate with interdigitated gold electrodes and annealed at 450°C for 3 h in air. Structural characterization by X-ray diffraction, high-resolution transmission electron microscopy, and Brunauer-Emmett-Teller analysis showed that spherical, oval, and rod-like Nb nanoparticles with 5–15 nm mean diameter were uniformly dispersed on hexagonal WO3nanorods with 50–250 nm diameter and 100 nm–5 µm length. It was found that the optimal Nb loading level of 0.5 wt% provides substantial enhancement of SO2response but the response became deteriorated at lower and higher loading levels. The 0.50 wt% Nb-loaded WO3nanorod sensing film exhibits the best SO2sensing performances with a high sensor response of ~10 and a short response time of ~6 seconds to 500 ppm of SO2at a relatively low optimal operating temperature of 250°C. Therefore, Nb loading is an effective mean to improve the SO2gas-sensing performances of hydrothermally prepared WO3nanorods.

scholarly journals Highly Sensitive and Selective Sensing of H2S Gas Using Precipitation and Impregnation-Made CuO/SnO2 Thick Films

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Pimpan Leangtanom ◽  
Anurat Wisitsoraat ◽  
Kata Jaruwongrangsee ◽  
Narong Chanlek ◽  
Adisorn Tuantranont ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Fast Response ◽  
Potential Candidate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cu Content ◽  
Transmission Electron ◽  
Highly Sensitive

AbstractIn this work, CuO-loaded tetragonal SnO2 nanoparticles (CuO/SnO2 NPs) were synthesized using precipitation/impregnation methods with varying Cu contents of 0–25 wt% and characterized for H2S detection. The material phase, morphology, chemical composition, and specific surface area of NPs were evaluated using X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller analysis. From gas-sensing data, the H2S responses of SnO2 NPs were greatly enhanced by CuO loading particularly at the optimal Cu content of 20 wt%. The 20 wt% CuO/SnO2 sensor showed an excellent response of 1.36 × 105 toward 10 ppm H2S and high H2S selectivity against H2, SO2, CH4, and C2H2 at a low optimum working temperature of 200 °C. In addition, the sensor provided fast response and a low detection limit of less than 0.15 ppm. The CuO–SnO2 sensor could therefore be a potential candidate for H2S detection in environmental applications.

Acetylene Sensing Characteristics of SnO2 Nanowires

2015 ◽  
Vol 1119 ◽  
pp. 132-136
Author(s):  
Bing Wang
Keyword(s):  
Electron Microscopy ◽  
Thermal Evaporation ◽  
Gas Adsorption ◽  
Gas Sensing ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sensing Material ◽  
Transmission Electron ◽  
Mems Technology ◽  
Sensing Characteristics

SnO2 nanowires have been fabricated using thermal evaporation of the mixed powders of SnO2 and active carbon with Au catalysts. The morphology and structure of the prepared nanowires are determined on the basis of field-emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectrometer (EDS), x-ray diffraction (XRD) and transmission electron microscopy (TEM). The comb-shape interdigitating electrode made by MEMS technology is used to auxiliary investigating the gas sensing performance of the synthesized SnO2 nanowires. The SnO2 nanowires have sensing response to acetylene concentration of 1000 ppm under operated temperature of 300°C. The gas sensing mechanism is attributed to the gas adsorption and desorption processes occurring on the surface of the gas sensing material.

Polyaniline/SnO2 Nanocomposite Sensor for NO2 Gas Sensing at Low Operating Temperature

2015 ◽  
Vol 14 (04) ◽  
pp. 1550011 ◽  
Author(s):  
A. Sharma ◽  
M. Tomar ◽  
V. Gupta ◽  
A. Badola ◽  
N. Goswami
Keyword(s):  
Thin Films ◽  
Gas Sensing ◽  
High Sensitivity ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
Chemical Route ◽  
Sensing Properties ◽  
Response Recovery ◽  
Transmission Electron ◽  
Gas Sensing Properties

In this paper gas sensing properties of 0.5–3% polyaniline (PAni) doped SnO 2 thin films sensors prepared by chemical route have been studied towards the trace level detection of NO 2 gas. The structural, optical and surface morphological properties of the PAni doped SnO 2 thin films were investigated by performing X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Raman spectroscopy measurements. A good correlation has been identified between the microstructural and gas sensing properties of these prepared sensors. Out of these films, 1% PAni doped SnO 2 sensor showed high sensitivity towards NO 2 gas along with a sensitivity of 3.01 × 102 at 40°C for 10 ppm of gas. On exposure to NO 2 gas, resistance of all sensors increased to a large extent, even greater than three orders of magnitude. These changes in resistance upon removal of NO 2 gas are found to be reversible in nature and the prepared composite film sensors showed good sensitivity with relatively faster response/recovery speeds.

scholarly journals Synthesis, Characterization, and NH3 Sensing Properties of (Zn0.7 Mn0.3-x Cex Fe2O4) Nano-Ferrite

2021 ◽  
Vol 2114 (1) ◽  
pp. 012040
Author(s):  
Laith Saheb ◽  
Tagreed M. Al-Saadi
Keyword(s):  
Recovery Time ◽  
Particle Distribution ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sensing Properties ◽  
Auto Combustion ◽  
Cubic Structure ◽  
Sensing Characteristics ◽  
Combustion Technique ◽  
Higher Sensitivity

Abstract This study includes the preparation of novel nano ferrite (Zn0.7 Mn0.3-x Cex Fe2O4) by using the auto combustion technique. For the following molar values, the percentage x was calculated: 0.0, 0.05, 0.1, 0.15, 0.2, 0.25, and 0.3. The nano-ferrite was calcined for 2 hours at 500°C. The energy dispersive x-ray spectroscopy (EDX), X-ray diffraction (XRD) and field emission scanning electron microscopy FE-SEM was used to examine structural, morphological, and sensing properties. The spinel cubic structure was revealed by XRD findings. The particle distribution was shown to contain voids by FE-SEM. The testing of sensing characteristics to NH3 gas indicated that the synthesized nano-ferrite has a small response time ranging from (15.3-25.2) s as well as a small recovery time between (36-58.5) s, also has a higher sensitivity of about 72.23%.

A Novel Tungsten Trioxide Based Gas Sensor for Indoor Formaldehyde Detection

2021 ◽  
Vol 16 (3) ◽  
pp. 363-367
Author(s):  
Gaoqi Zhang ◽  
Fan Zhang ◽  
Kaifang Wang ◽  
Tao Tian ◽  
Shanyu Liu ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Gas Sensor ◽  
Indoor Air ◽  
Gas Sensing ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sensing Material ◽  
Transmission Electron ◽  
Gas Sensing Properties ◽  
Gas Response

Accurate and real-time detection of formaldehyde (HCHO) in indoor air is urgently needed for human health. In this work, a ceramic material (WO3·H2O) with unique structure was successfully prepared using an efficient hydrothermal method. The crystallinity, morphology and microstructure of the as-prepared sensing material were analyzed by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) as well as transmission electron microscope (TEM). The characterization results suggest that the as-prepared sample is composed of square-like nanoplates with uneven surface. Formaldehyde vapor is utilized as the target gas to investigate gas sensing properties of the synthesized novel nanoplates. The testing results indicate that the as-fabricated gas sensor exhibit high gas response and excellent repeatability to HCHO gas. The response value (Ra/Rg) is 24.5 towards 70 ppm HCHO gas at 350 °C. Besides, the gas sensing mechanism was described.

A Formaldehyde Gas Sensor Based on Zinc Doped Lanthanum Ferrite

2013 ◽  
Vol 873 ◽  
pp. 304-310 ◽  
Author(s):  
Jin Zhang ◽  
Yu Min Zhang ◽  
Chang Yi Hu ◽  
Zhong Qi Zhu ◽  
Qing Ju Liu
Keyword(s):  
Gas Sensing ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Sensing Properties ◽  
Transmission Electron ◽  
Lanthanum Ferrite ◽  
Gas Sensing Properties ◽  
Recovery Times ◽  
Response And Recovery ◽  
Sensing Characteristics

The gas-sensing properties of zinc doped lanthanum ferrite (Zn-LaFeO3) compounds for formaldehyde were investigated in this paper. Zn-LaFeO3 powders were prepared using sol-gel method combined with microwave chemical synthesis. The powders were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. The formaldehyde gas-sensing characteristics for the sample were examined. The experimental results indicate that the sensor based on the sample Zn-LaFeO3 shows excellent gas-sensing properties to formaldehyde gas. At the optimal operating temperature of 250°C, the sensitivity of the sensor based on LaFe0.7Zn0.3O3 to 100ppm formaldehyde is 38, while to other test gases, the sensitivity is all lower than 20. The response and recovery times for the sample to formaldehyde gas are 100s and 100s, respectively.

Sign in / Sign up

Export Citation Format

Share Document