scholarly journals One-Step Fabrication of a Functionally Integrated Device Based on Polydimethylsiloxane-Coated SiO2 NPs for Efficient and Continuous Oil Absorption

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 5998
Author(s):  
Guannan Ju ◽  
Lei Zhou ◽  
Chang Jiao ◽  
Jiafeng Shen ◽  
Yihao Luan ◽  
...  
Keyword(s):  
Rational Design ◽  
Large Scale ◽  
Rapid Preparation ◽  
Hydrophobic Coating ◽  
Novel Structure ◽  
Engineering Strategy ◽  
One Step ◽  
Integrated Device ◽  
Structure Engineering ◽  
Spraying Method

The construction of superhydrophobic surfaces necessitates the rational design of topographic surface structure and the reduction of surface energy. To date, the reported strategies are usually complex with multi-steps and costly. Thus, the simultaneous achievement of the two indispensable factors is highly desired, yet rather challenging. Herein, we develop a novel structure engineering strategy of realizing the fabrication of a functionally integrated device (FID) with a superhydrophobic surface via a one-step spraying method. Specifically, silica nanoparticles are used to control the surface roughness of the device, while polydimethylsiloxane is employed as the hydrophobic coating. Benefitting from the adopted superhydrophobicity, the as-fabricated FID exhibits a continuous, excellent oil-water separating performance (e.g., 92.5% separating efficiency) when coupled with a peristaltic pump. Notably, a smart design of incorporating a gas switch is adopted in this device, thereby effectively preventing water from entering the FID, realizing thorough oil collection, and avoiding secondary pollution. This work opens up an avenue for the design and development of the FID, accessible for rapid preparation and large-scale practical application.

A Simple Synthesis of the Anticancer Drug Altretamine

2020 ◽  
Vol 17 (8) ◽  
pp. 628-630
Author(s):  
Vu Binh Duong ◽  
Pham Van Hien ◽  
Tran Thai Ngoc ◽  
Phan Dinh Chau ◽  
Tran Khac Vu
Keyword(s):  
Aqueous Solution ◽  
Anticancer Drug ◽  
Potassium Hydroxide ◽  
Large Scale ◽  
Synthesis Method ◽  
Practical Method ◽  
Cyanuric Chloride ◽  
Simple Synthesis ◽  
High Yield ◽  
One Step

A simple and practical method for the synthesis on a large scale of altretamine (1), a wellknown antitumor drug, has been successfully developed. The synthesis method involves the conversion of cyanuric chloride (2) into altretamine (1) by dimethylamination of 2 with an aqueous solution of 40% dimethylamine and potassium hydroxide in 1, -dioxan 4in one step to give altretamine (1) in high yield.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

Holey graphene nanosheets: large-scale rapid preparation and their application toward highly-effective water cleaning

Nanoscale ◽  
2014 ◽  
Vol 6 (20) ◽  
pp. 11659-11663 ◽  
Author(s):  
Zhicai Xing ◽  
Jingqi Tian ◽  
Qian Liu ◽  
Abdullah M. Asiri ◽  
Ping Jiang ◽  
...  
Keyword(s):  
Large Scale ◽  
Graphene Nanosheets ◽  
Rapid Preparation ◽  
Water Cleaning ◽  
Highly Effective ◽  
Effective Water

Global Reaction Model to Describe the Kinetics of Catalytic Pyrolysis of Coffee Grounds Waste

2017 ◽  
Vol 899 ◽  
pp. 173-178 ◽  
Author(s):  
Ronydes Batista Jr. ◽  
Bruna Sene Alves Araújo ◽  
Pedro Ivo Brandão e Melo Franco ◽  
Beatriz Cristina Silvério ◽  
Sandra Cristina Danta ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Large Scale ◽  
Catalytic Pyrolysis ◽  
Petroleum Products ◽  
Reaction Model ◽  
Heating Rates ◽  
Coffee Grounds ◽  
One Step ◽  
Global Reaction ◽  
The One

In view of the constant search for new sources of renewable energy, the particulate agro-industrial waste reuse emerges as an advantageous alternative. However, despite the advantages of using the biomass as an energy source, there is still strong resistance as the large-scale replacement of petroleum products due to the lack of scientifically proven efficient conversion technologies. In this context, the pyrolysis is presented as one of the most widely used thermal decomposition processes. The knowledge of aspects of chemical kinetics, thermodynamics these will, heat and mass transfer, are so important, since influence the quality of the product. This paper presents a kinetic study of slow pyrolysis of coffee grounds waste from dynamic thermogravimetric experiments (TG), using different powder catalysts. The primary thermal decomposition was described by the one-step reaction model, which considers a single global reaction. The kinetic parameters were estimated using nonlinear regression and the differential evolution method. The coffee ground waste was dried at 105°C for 24 hours. The sample in nature was analyzed at different heating rates, being 10, 15, 20, 30 and 50 K/min. In the catalytic pyrolysis, about 5% (w/w) of catalyst were added to the sample, at a heating rate of 30 K/min. The results show that the one-step model does not accurately represent the data of weight loss (TG) and its derivative (DTG), but can do an estimative of the activation energy reaction, and can show the differences caused by the catalysts. Although no one can say anything about the products formed with the addition of the catalyst, it would be necessary to micro-pyrolysis analysis, we can say the influence of the catalyst in the samples, based on the data obtained in thermogravimetric tests.

One-Step Synthesis and Isolation of N-(tert-Butoxycarbonyl)-N′-methylthiourea on a Large Scale

2008 ◽  
Vol 38 (21) ◽  
pp. 3834-3839 ◽  
Author(s):  
Teresa Andreani ◽  
Yan Jin ◽  
Jianshe Kong ◽  
Xian Liang ◽  
Tao Meng ◽  
...  
Keyword(s):  
Large Scale ◽  
One Step

Moving Forward, One Step at a Time

2003 ◽  
Vol 57 (2) ◽  
pp. 431-444 ◽  
Author(s):  
Barbara Koremenos ◽  
Duncan Snidal
Keyword(s):  
Research Design ◽  
Rational Design ◽  
Institutional Design ◽  
Theoretical Perspective ◽  
Design Decisions ◽  
Design Project ◽  
One Step ◽  
Game Theoretic ◽  
Alternative Research ◽  
Future Work

We reply to John Duffield's critique of the Rational Design project, a special issue of International Organization that explains the features of international institutions from a game-theoretic perspective. The project was deliberately limited to the analysis of explicit and observable institutional arrangements, and focused on the specific institutional properties of centralization, membership, scope, control, and flexibility. Its empirical contribution relies on case studies, but it is significantly amplified by the tight connections provided by a common theoretical perspective that is oriented toward testing a set of specific conjectures about institutional design. The results raise further issues of measurement and cross-case comparisons that provide valuable lessons for future work on institutional design. Although all of these research design choices are worth revisiting and questioning, as Duffield does, the initial results of the Rational Design project show that it provides a good basis from which to explore alternative research design decisions.

Sign in / Sign up

Export Citation Format

Share Document