scholarly journals Effects of He-D Interaction on Irradiation-Induced Swelling in Fe9Cr Alloys

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6669
Author(s):  
Haibiao Wu ◽  
Zhen Wang ◽  
Te Zhu ◽  
Qiu Xu ◽  
Baoyi Wang ◽  
...  
Keyword(s):  
Nuclear Energy ◽  
Positron Annihilation Spectroscopy ◽  
Atomic Scale ◽  
Nanometer Scale ◽  
Energy Materials ◽  
Helium Bubbles ◽  
Helium Atoms ◽  
Vacancy Clusters ◽  
Transmission Electron ◽  
Properties Of Materials

The atomic-scale defects such as (deuterium, helium)-vacancy clusters in nuclear energy materials are one of the causes for the deterioration of the macroscopic properties of materials. Unfortunately, they cannot be observed by transmission electron microscopy (TEM) before they grow to the nanometer scale. Positron annihilation spectroscopy (PAS) has been proven to be sensitive to open-volume defects, and could characterize the evolution of the size and concentration of the vacancy-like nanoclusters. We have investigated the effects of He-D interaction on the formation of nanoscale cavities in Fe9Cr alloys by PAS and TEM. The results show that small-sized bubbles are formed in the specimen irradiated with 5 × 1016 He+/cm2, and the subsequent implanted D-ions contribute to the growth of these helium bubbles. The most likely reason is that helium bubbles previously formed in the sample captured deuterium injected later, causing bubbles to grow. In the lower dose He-irradiated samples, a large number of small dislocations and vacancies are generated and form helium-vacancy clusters with the helium atoms.

scholarly journals A new mechanism for void-cascade interaction from nondestructive depth-resolved atomic-scale measurements of ion irradiation–induced defects in Fe

2020 ◽  
Vol 6 (31) ◽  
pp. eaba8437 ◽  
Author(s):  
S. Agarwal ◽  
M. O. Liedke ◽  
A. C. L. Jones ◽  
E. Reed ◽  
A. A. Kohnert ◽  
...  
Keyword(s):  
Positron Annihilation ◽  
Ion Irradiation ◽  
Atomic Scale ◽  
High Porosity ◽  
Positron Annihilation Lifetime ◽  
Vacancy Clusters ◽  
Transmission Electron ◽  
Nondestructive Investigation ◽  
Cascade Interaction ◽  
Induced Defects

The nondestructive investigation of single vacancies and vacancy clusters in ion-irradiated samples requires a depth-resolved probe with atomic sensitivity to defects. The recent development of short-pulsed positron beams provides such a probe. Here, we combine depth-resolved Doppler broadening and positron annihilation lifetime spectroscopies to identify vacancy clusters in ion-irradiated Fe and measure their density as a function of depth. Despite large concentrations of dislocations and voids in the pristine samples, positron annihilation measurements uncovered the structure of vacancy clusters and the change in their size and density with irradiation dose. When combined with transmission electron microscopy measurements, the study demonstrates an association between the increase in the density of small vacancy clusters with irradiation and a remarkable reduction in the size of large voids. This, previously unknown, mechanism for the interaction of cascade damage with voids in ion-irradiated materials is a consequence of the high porosity of the initial microstructure.

Simulating the fine structure in HRTEM images of defects

1990 ◽  
Vol 48 (4) ◽  
pp. 448-449
Author(s):  
M. J. Mills
Keyword(s):  
Structural Information ◽  
Memory Capacity ◽  
Atomic Scale ◽  
Formation Theory ◽  
Crystalline Defects ◽  
Essential Step ◽  
Transmission Electron ◽  
Properties Of Materials ◽  
Image Simulations ◽  
Image Formation Theory

The macroscopic properties of materials are often determined by the atomic structure of crystalline defects. High resolution transmission electron microscopy (HRTEM) enables the study of internal defects on the atomic scale. Image simulations represent an essential step in these studies since it is generally not possible to deduce the atomic positions near defects directly from the image intensities. Fortunately, image simulations which employ the multislice method and incorporate image formation theory for partially coherent illumination offer an accurate means of simulating images. With the availability of faster computers with larger memory capacity, the routine calulation of images of aperiodic defects is now feasible. This discussion will focus on the use of image simulations to extract structural information at defects, and to account for the artifacts which are frequently encountered in these studies.

Metallurgical Effects of Grain Boundary Ledges

1977 ◽  
Vol 35 ◽  
pp. 126-129
Author(s):  
L.E. Murr
Keyword(s):  
Grain Boundary ◽  
Quantitative Data ◽  
Mechanical Treatment ◽  
Unit Length ◽  
Physical And Mechanical Properties ◽  
Direct Observations ◽  
Transmission Electron ◽  
Properties Of Materials ◽  
Thermo Mechanical Treatment ◽  
Ledge Density

Ledges in grain boundaries can be identified by their characteristic contrast features (straight, black-white lines) distinct from those of lattice dislocations, for example1,2 [see Fig. 1(a) and (b)]. Simple contrast rules as pointed out by Murr and Venkatesh2, can be established so that ledges may be recognized with come confidence, and the number of ledges per unit length of grain boundary (referred to as the ledge density, m) measured by direct observations in the transmission electron microscope. Such measurements can then give rise to quantitative data which can be used to provide evidence for the influence of ledges on the physical and mechanical properties of materials.It has been shown that ledge density can be systematically altered in some metals by thermo-mechanical treatment3,4.

Electron Microscopy Studies of The Chemistry And Microstructure of BaF2 / YBa2Cu3O7-x Thin Films

1994 ◽  
Vol 52 ◽  
pp. 796-797
Author(s):  
J. L. Lee ◽  
C. A. Weiss ◽  
R. A. Buhrman ◽  
J. Silcox
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Thin Films ◽  
Scanning Transmission Electron Microscope ◽  
Atomic Scale ◽  
Island Growth ◽  
Multilayer Systems ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Mgo Substrate

BaF2 thin films are being investigated as candidates for use in YBa2Cu3O7-x (YBCO) / BaF2 thin film multilayer systems, given the favorable dielectric properties of BaF2. In this study, the microstructural and chemical compatibility of BaF2 thin films with YBCO thin films is examined using transmission electron microscopy and microanalysis. The specimen was prepared by using laser ablation to first deposit an approximately 2500 Å thick (0 0 1) YBCO thin film onto a (0 0 1) MgO substrate. An approximately 7500 Å thick (0 0 1) BaF2 thin film was subsequendy thermally evaporated onto the YBCO film.Images from a VG HB501A UHV scanning transmission electron microscope (STEM) operating at 100 kV show that the thickness of the BaF2 film is rather uniform, with the BaF2/YBCO interface being quite flat. Relatively few intrinsic defects, such as hillocks and depressions, were evident in the BaF2 film. Moreover, the hillocks and depressions appear to be faceted along {111} planes, suggesting that the surface is smooth and well-ordered on an atomic scale and that an island growth mechanism is involved in the evolution of the BaF2 film.

Images and Applications of Ion Explosion Spike Pits

1990 ◽  
Vol 48 (1) ◽  
pp. 584-585
Author(s):  
P. Fraundorf ◽  
J. Tentschert
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Bulk Material ◽  
Coulomb Repulsion ◽  
The Body ◽  
Atomic Scale ◽  
Early Solar System ◽  
Transmission Electron ◽  
Nuclear Particle ◽  
Particle Tracks

Since the discovery of their etchability in the early 1960‘s, nuclear particle tracks in insulators have had a diverse and exciting history of application to problems ranging from the selective filtration of cancer cells from blood to the detection of 244Pu in the early solar system. Their usefulness stems from the fact that they are comprised of a very thin (e.g. 20-40Å) damage core which etches more rapidly than does the bulk material. In fact, because in many insulators tracks are subject to radiolysis damage (beam annealing) in the transmission electron microscope, the body of knowledge concerning etched tracks far outweighs that associated with latent (unetched) tracks in the transmission electron microscope.With the development of scanned probe microscopies with lateral resolutions on the near atomic scale, a closer look at the structure of unetched nuclear particle tracks, particularly at their point of interface with solid surfaces, is now warranted and we think possible. The ion explosion spike model of track formation, described loosely, suggests that a burst of ionization along the path of a charged particle in an insulator creates an electrostatically unstable array of adjacent ions which eject one another by Coulomb repulsion from substitutional into interstitial sites. Regardless of the mechanism, the ejection process which acts to displace atoms along the track core seems likely to operate at track entry and exit surfaces, with the added feature of mass loss at those surfaces as well. In other words, we predict pits whose size is comparable to the track core width.

Applications of Nanotechnology for Textile Products: A Review

2018 ◽  
Vol 1 (3) ◽  
pp. 15-22
Author(s):  
Nemailal Tarafder
Keyword(s):  
Textile Industry ◽  
Industrial Revolution ◽  
Nanometer Scale ◽  
Cotton Industry ◽  
Future Success ◽  
The Future ◽  
Properties Of Materials ◽  
Textile Products

The fundamentals of nanotechnology lie in the fact that the properties of materials drastically change when their dimensions are reduced to nanometer scale. Nanotextiles can be produced by a variety of methods. The use of nanotechnology in the textile industry has increased rapidly due to its unique and valuable properties. Changed or improved properties with nanotechnology can provide new or enhanced functionalities. Nanotechnology is a growing interdisciplinary technology and seen as a new industrial revolution. The future success of nanotechnology in textile applications lies in the areas where new principles will be combined into durable and multi-functional textile systems without compromising the inherent properties. The advances in nanotechnology have created enormous opportunities and challenges for the textile industry, including the cotton industry.

scholarly journals In Situ Observation of Electron-Beam-Induced Formation of Nano-Structures in PbTe

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 163
Author(s):  
Iryna Zelenina ◽  
Igor Veremchuk ◽  
Yuri Grin ◽  
Paul Simon
Keyword(s):  
Electron Beam ◽  
Gas Phase ◽  
Threshold Current ◽  
Threshold Current Density ◽  
Atomic Scale ◽  
In Situ Observation ◽  
Nano Structures ◽  
Transmission Electron ◽  
Initial Crystal

Nano-scaled thermoelectric materials attract significant interest due to their improved physical properties as compared to bulk materials. Well-shaped nanoparticles such as nano-bars and nano-cubes were observed in the known thermoelectric material PbTe. Their extended two-dimensional nano-layer arrangements form directly in situ through electron-beam treatment in the transmission electron microscope. The experiments show the atomistic depletion mechanism of the initial crystal and the recrystallization of PbTe nanoparticles out of the microparticles due to the local atomic-scale transport via the gas phase beyond a threshold current density of the beam.

scholarly journals Microstructure and properties of nano-laminated Y3Si2C2 ceramics fabricated via in situ reaction by spark plasma sintering

2021 ◽  
Vol 10 (3) ◽  
pp. 578-586
Author(s):  
Lin-Kun Shi ◽  
Xiaobing Zhou ◽  
Jian-Qing Dai ◽  
Ke Chen ◽  
Zhengren Huang ◽  
...  
Keyword(s):  
Spark Plasma Sintering ◽  
Atomic Scale ◽  
Max Phase ◽  
X Ray Diffraction ◽  
Selected Area Electron Diffraction ◽  
Plasma Sintering ◽  
Transmission Electron ◽  
Spark Plasma ◽  
Diffraction Patterns

AbstractA nano-laminated Y3Si2C2 ceramic material was successfully synthesized via an in situ reaction between YH2 and SiC using spark plasma sintering technology. A MAX phase-like ternary layered structure of Y3Si2C2 was observed at the atomic-scale by high resolution transmission electron microscopy. The lattice parameters calculated from both X-ray diffraction and selected area electron diffraction patterns are in good agreement with the reported theoretical results. The nano-laminated fracture of kink boundaries, delamination, and slipping were observed at the tip of the Vickers indents. The elastic modulus and Vickers hardness of Y3Si2C2 ceramics (with 5.5 wt% Y2O3) sintered at 1500 °C were 156 and 6.4 GPa, respectively. The corresponding values of thermal and electrical conductivity were 13.7 W·m-1·K-1 and 6.3×105 S·m-1, respectively.

Sign in / Sign up

Export Citation Format

Share Document