scholarly journals Characteristics, Cryoprotection Evaluation and In Vitro Release of BSA-Loaded Chitosan Nanoparticles

Marine Drugs ◽  
2020 ◽  
Vol 18 (6) ◽  
pp. 315
Author(s):  
Qinying Yan ◽  
Jiaqi Weng ◽  
Xieqi Wu ◽  
Weiwei Wang ◽  
Qingliang Yang ◽  
...  
Keyword(s):  
Electrostatic Interactions ◽  
Release Kinetics ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Spectroscopic Techniques ◽  
Release Process ◽  
Dynamic High Pressure Microfluidization ◽  
High Consistency ◽  
And Function

Chitosan nanoparticles (CS-NPs) are under increasing investigation for the delivery of therapeutic proteins, such as vaccines, interferons, and biologics. A large number of studies have been taken on the characteristics of CS-NPs, and very few of these studies have focused on the microstructure of protein-loaded NPs. In this study, we prepared the CS-NPs by an ionic gelation method, and bovine serum albumin (BSA) was used as a model protein. Dynamic high pressure microfluidization (DHPM) was utilized to post-treat the nanoparticles so as to improve the uniformity, repeatability and controllability. The BSA-loaded NPs were then characterized for particle size, Zeta potential, morphology, encapsulation efficiency (EE), loading capacity (LC), and subsequent release kinetics. To improve the long-term stability of NPs, trehalose, glucose, sucrose, and mannitol were selected respectively to investigate the performance as a cryoprotectant. Furthermore, trehalose was used to obtain re-dispersible lyophilized NPs that can significantly reduce the dosage of cryoprotectants. Multiple spectroscopic techniques were used to characterize BSA-loaded NPs, in order to explain the release process of the NPs in vitro. The experimental results indicated that CS and Tripolyphosphate pentasodium (TPP) spontaneously formed the basic skeleton of the NPs through electrostatic interactions. BSA was incorporated in the basic skeleton, adsorbed on the surface of the NPs (some of which were inlaid on the NPs), without any change in structure and function. The release profiles of the NPs showed high consistency with the multispectral results.

scholarly journals DEVELOPMENT, CHARACTERIZATION AND IN VITRO RELEASE KINETIC STUDIES OF IBANDRONATE LOADED CHITOSAN NANOPARTICLES FOR EFFECTIVE MANAGEMENT OF OSTEOPOROSIS

2021 ◽  
pp. 120-125
Author(s):  
S. PATHAK ◽  
S. P. VYAS ◽  
A. PANDEY
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Sodium Tripolyphosphate ◽  
Release Kinetics ◽  
Ph Effect ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Release Kinetic

Objective: The objective of the present study was to develop, optimize, and evaluate Ibandronate-sodium loaded chitosan nanoparticles (Ib-CS NPs) to treat osteoporosis. Methods: NPs were prepared by the Ionic gelation method and optimized for various parameters such as the effect of concentration of chitosan, sodium tripolyphosphate (TPP), and pH effect on particle size polydispersity index (PDI), zeta potential, and entrapment efficiency. The prepared nanoparticles were characterized using particle size analyzer (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-Transform Infrared spectroscopy (FTIR).  Results: Formulated NPs were obtained in the average nano size in the range below 200 nm in TEM, SEM, and DLS studies. The particle size and encapsulation efficiency of the optimized formulation were 176.1 nm and 63.28%, respectively. The release profile of NPs was depended on the dissolution medium and followed the First-order release kinetics. Conclusion: Bisphosphonates are the most commonly prescribed drugs for treating osteoporosis in the US and many other countries, including India. Ibandronate is a widely used anti-osteoporosis drug, exhibits a strong inhibitory effect on bone resorption performed by osteoclast cells. Our results indicated that Ibandronate sodium-loaded chitosan nanoparticles provide an effective medication for the treatment of osteoporosis.

scholarly journals CURCUMIN LOADED CHITOSAN NANOPARTICLES FOR TOPICAL DELIVERY: FORMULATION DESIGN, IN VITRO EVALUATION, KINETICS AND STABILITY STUDIES

2021 ◽  
Vol 10 (2) ◽  
pp. 48-52
Author(s):  
J Adlin Jino Nesalin ◽  
Preethi Raj M N
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Topical Delivery ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
In Vitro Drug Release ◽  
Topical Gel

The main objective of this research is to evaluate a new approach for the preparation of bio adhesive nanoparticles and to design an innovative topical delivery system for curcumin which is able to enhance the drug anticancer activity. Curcumin encapsulated nanoparticles were prepared by ionic gelation method. The nanoparticles were found to be discrete, spherical with free-flowing properties and evaluated for particle size analysis, shape (scanning electron microscopy), drug encapsulation efficiency, FTIR, DSC studies and in vitro release performance. The best selected nanoparticles formulation (FS5, containing drug: polymer ratio 1:5) was incorporated into gels with a bio adhesive polymer. The Nanoencapsulated topical gels were evaluated for pH, spreadability, extrudability, viscosity, in vitro drug release, drug release kinetics, bio adhesion test, accelerated stability of selected gel formulation. In vitro drug release rate for selected Nanoencapsulated bio adhesive topical gel (FS3 gel, containing 1 % w/w of drug loaded nanoparticles and 0.6 % w/w of Carbopol 934) was found to control curcumin release over 12h. The results were then compared statistically and obtained a satisfactory correlation. Thus, in conclusion preparation protocol of Nanoencapsulated topical gel study may be adopted for a successful delivery of Curcumin for topical use.

scholarly journals FORMULATION AND EVALUATION OF ALLOPURINOL LOADED CHITOSAN NANOPARTICLES

2019 ◽  
pp. 49-52 ◽  
Author(s):  
Gurpreet Kandav ◽  
D.c. Bhatt ◽  
Deepak Kumar Jindal
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Sustained Release Formulation

Objective: The objective of the present investigation was to fabricate and characterize allopurinol loaded chitosan nanoparticles (A-CNPs) for sustained release of drug. Methods: The allopurinol loaded chitosan nanoparticles were successfully prepared by employing the ionotropic gelation method. Further, particle size (PS), polydispersity index (PDI), zeta potential (ZP), Differential Scanning Calorimetry (DSC), entrapment efficiency (EE), Transmission Electron Microscopy (TEM), in vitro drug release, X-Ray Diffraction (XRD) and Fourier transform infrared (FTIR) were used for evaluating formulated A-CNPs Results: A-CNPs was successfully prepared and the particle size, polydispersity index, ZP and entrapment efficiency were found to be 375.3±10.1 nm, 0.362±0.01 and 32.5±2.7 mV and 52.56±0.10% respectively. In vitro release profile of A-CNPs showed sustained release and Higuchi model was found to be best fit for drug release kinetics. FTIR study depicted no chemical interaction between pure drug allopurinol (AL) and other excipients. Conclusion: The sustained release formulation of allopurinol was successfully prepared using HMW chitosan and evaluated for different parameters.

Hollow Mesoporous Spheres with Cubic Pore Network as a Potential Carrier for Drug Storage and its In Vitro Release Kinetics

2005 ◽  
Vol 20 (1) ◽  
pp. 54-61 ◽  
Author(s):  
Yu-Fang Zhu ◽  
Jian-Lin Shi ◽  
Yong-Sheng Li ◽  
Hang-Rong Chen ◽  
Wei-Hua Shen ◽  
...  
Keyword(s):  
Release Kinetics ◽  
Diffusion Mechanism ◽  
In Vitro Release ◽  
Pore Network ◽  
Fickian Diffusion ◽  
Step Method ◽  
Release Process ◽  
Drug Molecules ◽  
Mcm 41

The hollow mesoporous spheres (HMS) with cubic pore network have been synthesized via a simple two-step method. Two drugs of different molecules size, Aspirin and Gentamicin, were tested by one simple adsorption process. Up to 336 mg Aspirin molecules can be stored in 1.0 g HMS, while Gentamicin molecules of much larger size are much more difficult to be introduced into the pore channels of HMS. The same results can be obtained by using MCM-48 and MCM-41 as comparative mesoporous carriers. The HMS shows significantly higher storage amount of Aspirin than conventional MCM-48 and MCM-41 due to its hollow core structure. The release process of HMS-Aspirin, MCM-48-Aspirin and MCM-41-Aspirin are found to have a sustained-release property and follow a Fickian diffusion mechanism. Moreover, the HMS is suitable for storage of drug molecules of much smaller size.

scholarly journals 5-Fluorouracil Encapsulated Chitosan Nanoparticles for pH-Stimulated Drug Delivery: Evaluation of Controlled Release Kinetics

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
R. Seda Tığlı Aydın ◽  
Mehlika Pulat
Keyword(s):  
Drug Delivery ◽  
Release Kinetics ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Particle Diameter ◽  
Ph Sensitivity ◽  
Sem Images ◽  
Therapeutic Drugs ◽  
Localized Drug Delivery

Nanoparticles consisting of human therapeutic drugs are suggested as a promising strategy for targeted and localized drug delivery to tumor cells. In this study, 5-fluorouracil (5-FU) encapsulated chitosan nanoparticles were prepared in order to investigate potentials of localized drug delivery for tumor environment due to pH sensitivity of chitosan nanoparticles. Optimization of chitosan and 5-FU encapsulated nanoparticles production revealed148.8±1.1 nm and243.1±17.9 nm particle size diameters with narrow size distributions, which are confirmed by scanning electron microscope (SEM) images. The challenge was to investigate drug delivery of 5-FU encapsulated chitosan nanoparticles due to varied pH changes. To achieve this objective, pH sensitivity of prepared chitosan nanoparticle was evaluated and results showed a significant swelling response for pH 5 with particle diameter of ∼450 nm. In vitro release studies indicated a controlled and sustained release of 5-FU from chitosan nanoparticles with the release amounts of 29.1–60.8% due to varied pH environments after 408 h of the incubation period. pH sensitivity is confirmed by mathematical modeling of release kinetics since chitosan nanoparticles showed stimuli-induced release. Results suggested that 5-FU encapsulated chitosan nanoparticles can be launched as pH-responsive smart drug delivery agents for possible applications of cancer treatments.

Preparation and Characterization of Insulin Nanoparticles Employing Chitosan and Poly(methylmethacrylate/methylmethacrylic acid) Copolymer

2006 ◽  
Vol 6 (9) ◽  
pp. 2874-2886 ◽  
Author(s):  
Ming-Guang Li ◽  
Wan-Liang Lu ◽  
Jian-Cheng Wang ◽  
Xuan Zhang ◽  
Hua Zhang ◽  
...  
Keyword(s):  
Oral Delivery ◽  
Electrostatic Interactions ◽  
Release Kinetics ◽  
Ph Sensitive ◽  
Release Process ◽  
Eudragit L100 ◽  
Acid Copolymer ◽  
Nanoparticle System ◽  
Modeling Data

As most of polypeptides are marginally stable, a mild formulation procedure would be beneficial for the activities of these drugs. The objective of the present study was to develop a novel pH-sensitive nanoparticle system that was suitable for entrapment of hydrophilic insulin but without affecting its conformation. Chitosan was incorporated as a positively charged material, and one of the three poly(methylmethacrylate/methylmethacrylic acid) copolymers, consisting of Eudragit L100-55, L100, and S100, was used as a negatively charged polymer for preparation of three insulin nanoparticles, respectively. Three nanoparticles obtained were spherical. The mean diameters were in the range from 200 nm to 250 nm, and the entrapment efficiencies, from 50% to 70%. The surface analysis indicated that insulin was evenly distributed in the nanoparticles. Polymer ratio of chitosan to Eudragit was the factor which influenced the nanoparticles significantly. Characterization results showed that the electrostatic interactions existed, thus providing a mild formulation procedure which did not affect the chemical integrity and the conformation of insulin. In vitro release studies revealed that all three types of the nanoparticles exhibited a pH-dependant characteristic. The modeling data indicated that the release kinetics of insulin was nonlinear, and during the release process, the nanoparticles showed a polynomial swelling. On overall estimation, the insulin chitosan-Eudragit L100-55 nanoparticles may be better for the oral delivery. This new pH-sensitive nanoparticle formulation using chitosan and Eudragit L100-55 polymer may provide a useful approach for entrapment of hydrophilic polypeptides without affecting their conformation.

Formulation of Modified Release Atorvastatin Nanoparticles by Emulsion Interfacial Reaction Method

2015 ◽  
Vol 8 (3) ◽  
pp. 2937-2940
Author(s):  
Sudhakar Sekar ◽  
Shee Sim May
Keyword(s):  
Interfacial Reaction ◽  
Therapeutic Potential ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Morphological Characteristics ◽  
Preparation Technique ◽  
Modified Release ◽  
Reaction Method ◽  
Vitro Release

The aim of the study is to formulate a modified release chitosan nanoparticles for the oral delivery of atorvastatin and to study the in vitro release of atorvastatin from chitosan nanoparticles. Atorvastatin-loaded chitosan nanoparticles were prepared with different concentration of cross-linking agent (glutaraldehyde) by emulsion interfacial reaction method. The formed nanoparticles were characterized in terms of size and morphological characteristics by scanning electron microscopy (SEM) and transmission electron microscope (TEM). Spherical and regular nanoparticles with the size range of 100-250nm were formed. Atorvastatin encapsulation efficiency of nanoparticles was found to be highest in ANP3, followed by ANP2 and ANP1. The in vitro release of atorvastatin was studied by membrane diffusion technique. The resulted cumulative percentage of drug released for ANP1, ANP2 and ANP3 were 60.08%, 34.81% and 20.39% respectively. Through this study, the nanoparticles preparation technique has shown to be a promising approach for enhancing the dissolution of hydrophobic drugs like atorvastatin calcium. The application of this novel delivery system offers good therapeutic potential in the management of hypercholesterolemia and dyslipidemia.

Quality-by-Design Enabled Chitosan Nanoparticles for Antitubercular Therapy: Formulation, Statistical Optimization, and In vitro Characterization

2020 ◽  
Vol 15 ◽  
Author(s):  
Manasi M. Chogale ◽  
Sujay S. Gaikwad ◽  
Savita P. Kulkarni ◽  
Vandana B. Patravale
Keyword(s):  
Side Effects ◽  
Treatment Regimen ◽  
Research Work ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Antitubercular Therapy ◽  
Prolonged Treatment ◽  
High Dose ◽  
Average Size

Background: Tuberculosis (TB) continues to be among the leading causes for high mortality among developing countries. Though a seemingly effective treatment regimen against TB is in place, there has been no significant improvement in the therapeutic rates. This is primarily owing to the high drug doses, their associated sideeffects, and prolonged treatment regimen. Discontinuation of therapy due to the severe side effects of the drugs results in the progression of the infection to the more severe drug-resistant TB. Objectives: Reformulation of the current existing anti TB drugs into more efficient dosage forms could be an ideal way out. Nanoformulations have been known to mitigate the side effects of toxic, high-dose drugs. Hence, the current research work involves the formulation of Isoniazid (INH; a first-line anti TB molecule) loaded chitosan nanoparticles for pulmonary administration. Methods: INH loaded chitosan nanoparticles were prepared by ionic gelation method using an anionic crosslinker. Drugexcipient compatibility was evaluated using DSC and FT-IR. The formulation was optimized on the principles of Qualityby-Design using a full factorial design. Results: The obtained nanoparticles were spherical in shape having an average size of 620±10.97 nm and zeta potential +16.87±0.79 mV. Solid state characterization revealed partial encapsulation and amorphization of INH into the nanoparticulate system. In vitro release study confirmed an extended release of INH from the system. In vitro cell line based safety and efficacy studies revealed satisfactory results. Conclusion: The developed nanosystem is thus an efficient approach for antitubercular therapy.

Design, Synthesis and Studies on Novel Polymeric Prodrugs of Erlotinib for Colon Drug Delivery

2020 ◽  
Vol 20 ◽  
Author(s):  
Sahil Kumar ◽  
Bandna Sharma ◽  
Tilak R. Bhardwaj ◽  
Rajesh K. Singh
Keyword(s):  
Drug Delivery ◽  
Colon Cancer ◽  
Drug Release ◽  
Anticancer Agents ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Specific Treatment ◽  
Drug Conjugates ◽  
Polymer Drug Conjugates

Aims: In the present study, polymer-drug conjugates were synthesized based on azo-bond cleavage drug delivery approach for targeting erlotinib as anticancer drug specifically to the colon for the proficient treatment of colon cancer. Background: Colon cancer (CC) is the third commonly detected tumor worldwide and it make up about 10 % of all cases of cancers. Most of the chemotherapeutic drugs available for treating colon cancer are not only toxic to cancerous cells but also to the normal healthy cells. Among the various approaches to get rid of the adverse effects of anticancer agents, prodrugs are one of the most imperative approaches. Objective: The objective of the study is to chemically modify the erlotinib drug through azo-bond linkage and suitable spacer which will be finally linked to polymeric backbone to give desired polymer linked prodrug. The azo reductase enzyme present in colon is supposed to cleave the azo-bond specifically and augment the drug release at the colon. Methods: The synthesized conjugates were characterized by IR and 1H-NMR spectroscopy. The cleavage of aromatic azobond resulted in a potential colon-specific liberation of drug from conjugate studied in rat fecal contents. In vitro release profiles of polyphosphazene-linked conjugates of erlotinib have been studied at pH 1.2, pH 6.8 and pH 7.4. The stability study was designed to exhibit that free drug was released proficiently and unmodified from polyphosphazene-erlotinib conjugates having aromatic azo-bond in artificial colon conditions. Results: The synthesized conjugates were demonstrated to be stable in simulated upper gastro-intestinal tract conditions. The drug release kinetics shows that all the polymer-drug conjugates of erlotinib follow zero-order release kinetics which indicates that the drug release from the polymeric backbone is independent of its concentration. Kinetic study of conjugates with slope (n) shows the anomalous type of release with an exponent (n) > 0.89 indicating a super case II type of release. Conclusion: These studies indicate that polyphosphazene linked drug conjugates of erlotinib could be the promising candidates for the site-specific treatment of colon cancer with least detrimental side-effects.

scholarly journals Clinoptilolite Microparticles as Carriers of Catechin-Rich Acacia Catechu Extracts: Microencapsulation and In Vitro Release Study

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1655
Author(s):  
Zvezdelina Yaneva ◽  
Donika Ivanova ◽  
Nikolay Popov
Keyword(s):  
Composite System ◽  
Release Kinetics ◽  
Spectral Characteristics ◽  
In Vitro Release ◽  
Medium Ph ◽  
Release Capacity ◽  
Bioactive Substance ◽  
Acacia Catechu ◽  
Vitro Release

The main goal of the present study was to investigate the microencapsulation, in vitro release capacity and efficiency of catechin-rich Acacia catechu extract by Clinosorbent-5 (CLS-5) microparticles by in-depth detailed analyses and mathematical modelling of the encapsulation and in vitro release kinetics behaviour of the polyphenol-mineral composite system. The bioflavanol encapsulation and release efficiency on/from the mineral matrix were assessed by sorption experiments and interpretative modelling of the experimental data. The surface and spectral characteristics of the natural bioactive substance and the inorganic microcarrier were determined by Fourier Transform Infrared Spectroscopy (FTIR) and Ultraviolet/Visible (UV/Vis) spectrophotometric analyses. The maximum extent of catechin microencapsulation in acidic medium was 32%. The in vitro release kinetics study in simulated enzyme-free gastric medium (pH = 1.2) approved 88% maximum release efficiency achieved after 24 h. The in vitro release profile displayed that the developed bioflavanol/clinoptilolite microcarrier system provided sustained catechin in vitro release behaviour without an initial burst effect. Thus, the results from the present study are essential for the design and development of innovative catechin-CLS-5 microcarrier systems for application in human and veterinary medicine.

Sign in / Sign up

Export Citation Format

Share Document