scholarly journals Spider Web-Like Phononic Crystals for Piezoelectric Mems Resonators to Reduce Acoustic Energy Dissipation

Micromachines ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 626 ◽  
Author(s):  
Bao ◽  
Wu ◽  
Zhou ◽  
Wu ◽  
Zhang ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Wave Attenuation ◽  
Phononic Crystals ◽  
Acoustic Energy ◽  
Acoustic Metamaterials ◽  
Element Analysis ◽  
Micro Electro Mechanical Systems ◽  
Spider Web ◽  
Mems Resonators ◽  
Energy Leakage

Phononic crystals (PnC) are a remarkable example of acoustic metamaterials with superior wave attenuation mechanisms for piezoelectric micro-electro-mechanical systems (MEMS) resonators to reduce the energy dissipation. Herein, a spider web-like PnC (SW-PnC) is proposed to sufficiently isolate the wave vibration. Finite-element analysis is performed to gain insight into the transmission property of finite PnC, and band characteristics by infinite periods. In comparison with the circle hole PnC at a similar bandgap, due to its already very lightweight PnC structure compared with previously reported PnCs, the proposed PnC offers a significantly lighter weight, smaller lattice constant, and greater energy leakage inhibition. More specifically, the resonator with the SW-PnC plate as the anchoring substrate exhibited a quality factor as high as 66569.7 at 75.82 MHz.

A Design Method for Sound Absorbing Structure at Low Frequency

2020 ◽  
Vol 982 ◽  
pp. 39-50
Author(s):  
Ying Jie Fu ◽  
Xiao Ming Wang ◽  
Yu Lin Mei
Keyword(s):  
Design Method ◽  
Low Frequency ◽  
Acoustic Energy ◽  
Channel Structure ◽  
Response Analysis ◽  
Acoustic Metamaterials ◽  
Element Analysis ◽  
Low Frequencies ◽  
Mass Unit ◽  
The Masses

Traditional acoustic absorbing materials are not effective for low-frequency engineering applications, but on the basis of the locally resonant principle, acoustic metamaterials can utilize the resonance of vibrators to dissipate acoustic energy and realize the subwavelength design of acoustic absorbers, therefore the acoustic metamaterials have great potential applications for noise reduction at low frequencies. This paper firstly employs the Bloch theory to investigate the effects of the parameters of the unit cell of the embedded membrane-and-mass metamaterials on the dispersion characteristics of the metamaterials, and the band gap is verified by the full wave finite element analysis. And then, a model of acoustic metamaterials is constructed by embeding an array of membrane-and-masses into a channel structure filled with acoustic materials. Next the transient frequency response analysis is performed to simulate the wave propagation in the model, the results show that the acoustic metamaterials can absorb the sound through the local resonance of the membrane-and-mass vibrators. Finally, an acoustic metamaterial maze structure is designed and analyzed, in the structure the membrane-and-mass array is embedded and the masses varies periodically. The research illustrates that the acoustic metamaterials with membrane-and-mass unit cells have excellent performances on the sound absorption at low frequency.

scholarly journals Plane and Surface Acoustic Waves Manipulation by Three-Dimensional Composite Phononic Pillars with 3D Bandgap and Defect Analysis

Acoustics ◽  
2021 ◽  
Vol 3 (1) ◽  
pp. 25-41
Author(s):  
Muhammad ◽  
C.W. Lim ◽  
Andrew Y. T. Leung
Keyword(s):  
Acoustic Waves ◽  
Wave Attenuation ◽  
Numerical Technique ◽  
Surface Acoustic Waves ◽  
Three Dimensional ◽  
Phononic Crystals ◽  
Defect State ◽  
Two Dimensional ◽  
Defect Analysis ◽  
Acoustic Metamaterials

The current century witnessed an overwhelming research interest in phononic crystals (PnCs) and acoustic metamaterials (AMs) research owing to their fantastic properties in manipulating acoustic and elastic waves that are inconceivable from naturally occurring materials. Extensive research literature about the dynamical and mechanical properties of acoustic metamaterials currently exists, and this maturing research field is now finding possible industrial and infrastructural applications. The present study proposes a novel 3D composite multilayered phononic pillars capable of inducing two-dimensional and three-dimensional complete bandgaps (BGs). A phononic structure that consisted of silicon and tungsten layers was subjected to both plane and surface acoustic waves in three-dimensional and two-dimensional periodic systems, respectively. By frequency response study, the wave attenuation, trapping/localization, transmission, and defect analysis was carried out for both plane and surface acoustic waves. In the bandgap, the localized defect state was studied for both plane and surface acoustic waves separately. At the defect state, the localization of both plane and surface acoustic waves was observed. By varying the defect size, the localized frequency can be made tailorable. The study is based on a numerical technique, and it is validated by comparison with a reported theoretical work. The findings may provide a new perspective and insight for the designs and applications of three-dimensional phononic crystals for surface acoustic wave and plane wave manipulation, particularly for energy harvesting, sensing, focusing and waves isolation/attenuation purposes.

scholarly journals Figure of Merit Enhancement of Laterally Vibrating RF-MEMS Resonators via Energy-Preserving Addendum Frame

Micromachines ◽  
2022 ◽  
Vol 13 (1) ◽  
pp. 105
Author(s):  
Temesgen Bailie Workie ◽  
Zhaohui Wu ◽  
Panliang Tang ◽  
Jingfu Bao ◽  
Ken-ya Hashimoto
Keyword(s):  
Quality Factor ◽  
Figure Of Merit ◽  
Electromechanical Coupling ◽  
Rf Mems ◽  
Acoustic Energy ◽  
Frame Structure ◽  
Electromechanical Coupling Coefficient ◽  
Element Analysis ◽  
Mems Resonators ◽  
Spurious Mode

This paper examines a new technique to improve the figure of merit of laterally vibrating RF-MEMS resonators through an energy-preserving suspended addendum frame structure using finite element analysis. The proposed suspended addendum frame on the sides of the resonant plate helps as a mechanical vibration isolator from the supporting substrate. This enables the resonator to have a low acoustic energy loss, resulting in a higher quality factor. The simulated attenuation characteristics of the suspended addendum frame are up to an order of magnitude larger than those achieved with the conventional structure. Even though the deployed technique does not have a significant impact on increasing the effective electromechanical coupling coefficient, due to a gigantic improvement in the unloaded quality factor, from 4106 to 51,136, the resonator with the suspended frame achieved an 11-folds improvement in the figure of merit compared to that of the conventional resonator. Moreover, the insertion loss was improved from 5 dB down to a value as low as 0.7 dB. Furthermore, a method of suppressing spurious mode is demonstrated to remove the one incurred by the reflected waves due to the proposed energy-preserving structure.

Impact Load Buffering Method Based on Stress Wave Attenuation Principle

2019 ◽  
Vol 11 (02) ◽  
pp. 1950019 ◽  
Author(s):  
Lin Gan ◽  
He Zhang ◽  
Cheng Zhou ◽  
Lin Liu
Keyword(s):  
Stress Wave ◽  
Wave Attenuation ◽  
Impact Load ◽  
Dynamics Simulation ◽  
Scanning System ◽  
Isolation Method ◽  
Element Analysis ◽  
System A ◽  
High Emission ◽  
The Impact

Rotating scanning motor is the important component of synchronous scanning laser fuze. High emission overload environment in the conventional ammunition has a serious impact on the reliability of the motor. Based on the theory that the buffer pad can attenuate the impact stress wave, a new motor buffering Isolation Method is proposed. The dynamical model of the new buffering isolation structure is established by ANSYS infinite element analysis software to do the nonlinear impact dynamics simulation of rotating scanning motor. The effectiveness of Buffering Isolation using different materials is comparatively analyzed. Finally, the Macht hammer impact experiment is done, the results show that in the experience of the 70,000[Formula: see text]g impact acceleration, the new buffering Isolation method can reduce the impact load about 15 times, which can effectively alleviate the plastic deformation of rotational scanning motor and improve the reliability of synchronization scanning system. A new method and theoretical basis of anti-high overload research for Laser Fuze is presented.

scholarly journals Wave energy dissipation in the mangrove vegetation off Mumbai, India

2017 ◽  
Author(s):  
Samiksha S. Volvaiker ◽  
Ponnumony Vethamony ◽  
Prasad K. Bhaskaran ◽  
Premanand Pednekar ◽  
MHamsa Jishad ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Drag Coefficient ◽  
Wave Height ◽  
Wave Attenuation ◽  
Coastal Region ◽  
Measured Data ◽  
Vegetation Density ◽  
Mangrove Vegetation ◽  
Wave Height Attenuation ◽  
Set Up

Abstract. Coastal regions of India are prone to sea level rise, cyclones, storm surges and human induced activities, resulting in flood, erosion, and inundation. The primary aim of the study is to estimate wave attenuation by mangrove vegetation using SWAN model in standalone mode, as well as SWAN nested with WW3 model for the Mumbai coastal region. To substantiate the model results, wave measurements were carried out during 5–8 August 2015 at 3 locations in a transect normal to the coast using surface mounted pressure level sensors under spring tide conditions. The measured data presents wave height attenuation of the order of 52 %. The study shows a linear relationship between wave height attenuation and gradual changes in water level in the nearshore region, in phase with the tides. Model set-up and sensitivity analyses were conducted to understand the model performance to vegetation parameters. It was observed that wave attenuation increased with an increase in drag coefficient (Cd), vegetation density, and stem diameter. For a typical set-up for Mumbai coastal region having vegetation density of 0.175 per m2, stem diameter of 0.3 m and drag coefficient varying from 0.4 to 1.5, the model reproduced attenuation, ranging from 49 to 55 %, which matches well with the measured data. Spectral analysis performed for the cases with and without vegetation very clearly portrays energy dissipation in the vegetation area as well as spectral changes. This study has the potential of improving the quality of wave prediction in vegetation areas, especially during monsoon season and extreme weather events.

scholarly journals Tunable Fluid-Type Metasurface for Wide-Angle and Multifrequency Water-Air Acoustic Transmission

Research ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Zhandong Huang ◽  
Shengdong Zhao ◽  
Yiyuan Zhang ◽  
Zheren Cai ◽  
Zheng Li ◽  
...  
Keyword(s):  
Incident Angle ◽  
Acoustic Energy ◽  
Wide Angle ◽  
Acoustic Metamaterials ◽  
Fluid Type ◽  
Acoustic Transmission ◽  
Interface Instability ◽  
Practical Applications ◽  
Air Interface ◽  
Transmission Enhancement

Efficient acoustic communication across the water-air interface remains a great challenge owing to the extreme acoustic impedance mismatch. Few present acoustic metamaterials can be constructed on the free air-water interface for enhancing the acoustic transmission because of the interface instability. Previous strategies overcoming this difficulty were limited in practical usage, as well as the wide-angle and multifrequency acoustic transmission. Here, we report a simple and practical way to obtain the wide-angle and multifrequency water-air acoustic transmission with a tunable fluid-type acoustic metasurface (FAM). The FAM has a transmission enhancement of acoustic energy over 200 times, with a thickness less than the wavelength in water by three orders of magnitude. The FAM can work at an almost arbitrary water-to-air incident angle, and the operating frequencies can be flexibly adjusted. Multifrequency transmissions can be obtained with multilayer FAMs. In experiments, the FAM is demonstrated to be stable enough for practical applications and has the transmission enhancement of over 20 dB for wide frequencies. The transmission enhancement of music signal across the water-air interface was performed to demonstrate the applications in acoustic communications. The FAM will benefit various applications in hydroacoustics and oceanography.

Analytical and Experimental Investigation on Sound Transmission of Double Thin Plates with Magnetic Negative Stiffness

2018 ◽  
Vol 10 (05) ◽  
pp. 1850054 ◽  
Author(s):  
Akintoye Olumide Oyelade ◽  
Yi Chen ◽  
Ruojun Zhang ◽  
Gengkai Hu
Keyword(s):  
Finite Element ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Interaction Force ◽  
Negative Stiffness ◽  
Thin Plates ◽  
Acoustic Metamaterials ◽  
Element Analysis ◽  
Theoretical Formulation ◽  
Wave Condition

Transmission loss of acoustic metamaterials (AM) made of double thin plates with magnetic (negative) stiffness was analyzed using theory, finite element analysis and experimental techniques. The theoretical formulation was done using a rectangular duct below the first cut off frequency, the model is then validated against finite element method and experiment. Two cubic magnets were used, their interaction force and the resulted magnetic stiffness were calculated. The sound transmission loss (STL) of the structure is calculated for plane wave condition, the addition of magnetic mass shifts STL peaks to the lower frequency compared to a structure without mass. The slight increase in STL for small negative stiffness in experiment is not enough to cancel the effect of air compressibility. However, a significant enhancement could be expected if negative stiffness can be made large enough in the double thin plates. The developed AM can be employed as a prospective sound engineering control at low frequency.

Sign in / Sign up

Export Citation Format

Share Document