scholarly journals Porous PLAs with Controllable Density by FDM 3D Printing and Chemical Foaming Agent

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 866
Author(s):  
A. R. Damanpack ◽  
André Sousa ◽  
M. Bodaghi
Keyword(s):  
3D Printing ◽  
Flow Rate ◽  
Three Dimensional ◽  
Poly Lactic Acid ◽  
Layer By Layer ◽  
Printing Technology ◽  
Material Density ◽  
Foaming Agent ◽  
3D Printing Technology ◽  
Fabrication Parameters

This paper shows how fused decomposition modeling (FDM), as a three-dimensional (3D) printing technology, can engineer lightweight porous foams with controllable density. The tactic is based on the 3D printing of Poly Lactic Acid filaments with a chemical blowing agent, as well as experiments to explore how FDM parameters can control material density. Foam porosity is investigated in terms of fabrication parameters such as printing temperature and flow rate, which affect the size of bubbles produced during the layer-by-layer fabrication process. It is experimentally shown that printing temperature and flow rate have significant effects on the bubbles’ size, micro-scale material connections, stiffness and strength. An analytical equation is introduced to accurately simulate the experimental results on flow rate, density, and mechanical properties in terms of printing temperature. Due to the absence of a similar concept, mathematical model and results in the specialized literature, this paper is likely to advance the state-of-the-art lightweight foams with controllable porosity and density fabricated by FDM 3D printing technology.

Importance of 3D Printing Technology in Medical Fields

2019 ◽  
pp. 21-40
Author(s):  
Ranjit Barua ◽  
Sudipto Datta ◽  
Amit Roychowdhury ◽  
Pallab Datta
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
New Technology ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Medical Field ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Proper Material

Three-dimensional or 3D printing technology is a growing interest in medical fields like tissue engineering, dental, drug delivery, prosthetics, and implants. It is also known as the additive manufacturing (AM) process because the objects are done by extruding or depositing the material layer by layer, and the material may be like biomaterials, plastics, living cells, or powder ceramics. Specially in the medical field, this new technology has importance rewards in contrast with conventional technologies, such as the capability to fabricate patient-explicit difficult components, desire scaffolds for tissue engineering, and proper material consumption. In this chapter, different types of additive manufacturing (AM) techniques are described that are applied in the medical field, especially in community health and precision medicine.

Importance of 3D Printing Technology in Medical Fields

2021 ◽  
pp. 704-717
Author(s):  
Ranjit Barua ◽  
Sudipto Datta ◽  
Amit Roychowdhury ◽  
Pallab Datta
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
New Technology ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Medical Field ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Proper Material

Three-dimensional or 3D printing technology is a growing interest in medical fields like tissue engineering, dental, drug delivery, prosthetics, and implants. It is also known as the additive manufacturing (AM) process because the objects are done by extruding or depositing the material layer by layer, and the material may be like biomaterials, plastics, living cells, or powder ceramics. Specially in the medical field, this new technology has importance rewards in contrast with conventional technologies, such as the capability to fabricate patient-explicit difficult components, desire scaffolds for tissue engineering, and proper material consumption. In this chapter, different types of additive manufacturing (AM) techniques are described that are applied in the medical field, especially in community health and precision medicine.

scholarly journals Traditional versus mirror three-dimensional printing technology for isolated acetabular fractures: a retrospective study with a median follow-up of 25 months

2021 ◽  
Vol 49 (6) ◽  
pp. 030006052110285
Author(s):  
Kai Xiao ◽  
Bo Xu ◽  
Lin Ding ◽  
Weiguang Yu ◽  
Lei Bao ◽  
...  
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Operation Time ◽  
Harris Hip Score ◽  
Acetabular Fractures ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
3D Printing Technology ◽  
Significant Difference

Objective To assess the outcomes of traditional three-dimensional (3D) printing technology (TPT) versus mirror 3D printing technology (MTT) in treating isolated acetabular fractures (IAFs). Methods Consecutive patients with an IAF treated by either TPT or MTT at our tertiary medical centre from 2012 to 2018 were retrospectively reviewed. Follow-up was performed 1, 3, 6, and 12 months postoperatively and annually thereafter. The primary outcome was the Harris hip score (HHS), and the secondary outcomes were major intraoperative variables and key orthopaedic complications. Results One hundred fourteen eligible patients (114 hips) with an IAF (TPT, n = 56; MTT, n = 58) were evaluated. The median follow-up was 25 months (range, 21–28 months). At the last follow-up, the mean HHS was 82.46 ±14.70 for TPT and 86.30 ± 13.26 for MTT with a statistically significant difference. Significant differences were also detected in the major intraoperative variables (operation time, intraoperative blood loss, number of fluoroscopic screenings, and anatomical reduction number) and the major orthopaedic complications (loosening, implant failure, and heterotopic ossification). Conclusion Compared with TPT, MTT tends to produce accurate IAF reduction and may result in better intraoperative variables and a lower rate of major orthopaedic complications.

scholarly journals Desain dan Pembuatan Prototype Piston Honda MEGAPRO FI Menggunakan 3D Printing

2020 ◽  
Vol 1 (2) ◽  
pp. 81-91
Author(s):  
Frince Marbun ◽  
Richard A.M. Napitupulu
Keyword(s):  
3D Printing ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Layer By Layer ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Manufacturing Technologies ◽  
Aided Design

3D printing technology has great potential in today's manufacturing world, one of its uses is in making miniatures or prototypes of a product such as a piston. One of the most famous and inexpensive 3D printing (additive manufacturing) technologies is Fused Deposition Modeling (FDM), the principle FDM works by thermoplastic extrusion through a hot nozzle at melting temperature then the product is made layer by layer. The two most commonly used materials are ABS and PLA so it is very important to know the accuracy of product dimensions. FDM 3D Printing Technology is able to make duplicate products accurately using PLA material. FDM machines work by printing parts that have been designed by computer-aided design (CAD) and then exported in the form of STL or .stl files and uploaded to the slicer program to govern the printing press according to the design. Using Anet A8 brand 3D printing tools that are available to the public, Slicing of general CAD geometry files such as autocad and solidwork is the basis for making this object. This software is very important to facilitate the design process to be printed. Some examples of software that can be downloaded and used free of charge such as Repetier-Host and Cura. by changing the parameters in the slicer software is very influential in the 3D printing manufacturing process.

scholarly journals ADDITIVE MANUFACTURING - APPLICATION OPPORTUNITIES FOR THE AVIATION INDUSTRY

2015 ◽  
Vol 6 (2) ◽  
pp. 63-86
Author(s):  
Dipesh Dhital ◽  
Yvonne Ziegler
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Computer Aided Design ◽  
Free Form ◽  
Aviation Industry ◽  
Layer By Layer ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Subtractive Manufacturing ◽  
Aided Design

Additive Manufacturing also known as 3D Printing is a process whereby a real object of virtually any shape can be created layer by layer from a Computer Aided Design (CAD) model. As opposed to the conventional Subtractive Manufacturing that uses cutting, drilling, milling, welding etc., 3D printing is a free-form fabrication process and does not require any of these processes. The 3D printed parts are lighter, require short lead times, less material and reduce environmental footprint of the manufacturing process; and is thus beneficial to the aerospace industry that pursues improvement in aircraft efficiency, fuel saving and reduction in air pollution. Additionally, 3D printing technology allows for creating geometries that would be impossible to make using moulds and the Subtractive Manufacturing of drilling/milling. 3D printing technology also has the potential to re-localize manufacturing as it allows for the production of products at the particular location, as and when required; and eliminates the need for shipping and warehousing of final products.

scholarly journals Three-Dimensional Technology Applications in Maxillofacial Reconstructive Surgery: Current Surgical Implications

Nanomaterials ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2523
Author(s):  
Yasmin Ghantous ◽  
Aysar Nashef ◽  
Aladdin Mohanna ◽  
Imad Abu-El-naaj
Keyword(s):  
3D Printing ◽  
Head And Neck ◽  
Donor Site ◽  
Maxillofacial Surgery ◽  
Three Dimensional ◽  
Oral And Maxillofacial Surgery ◽  
3D Technology ◽  
Printing Technology ◽  
Reconstructive Procedures ◽  
3D Printing Technology

Defects in the oral and maxillofacial (OMF) complex may lead to functional and esthetic impairment, aspiration, speech difficulty, and reduced quality of life. Reconstruction of such defects is considered one of the most challenging procedures in head and neck surgery. Transfer of different auto-grafts is still considered as the “gold standard” of regenerative and reconstructive procedures for OMF defects. However, harvesting of these grafts can lead to many complications including donor-site morbidity, extending of surgical time, incomplete healing of the donor site and others. Three-dimensional (3D) printing technology is an innovative technique that allows the fabrication of personalized implants and scaffolds that fit the precise anatomy of an individual’s defect and, therefore, has attracted significant attention during the last few decades, especially among head and neck surgeons. Here we discuss the most relevant applications of the 3D printing technology in the oral and maxillofacial surgery field. We further show different clinical examples of patients who were treated at our institute using the 3D technology and discuss the indications, different technologies, complications, and their clinical outcomes. We demonstrate that 3D technology may provide a powerful tool used for reconstruction of various OMF defects, enabling optimal clinical results in the suitable cases.

3D Printing Technology in Drug Delivery: Recent Progress and Application

2019 ◽  
Vol 24 (42) ◽  
pp. 5039-5048 ◽  
Author(s):  
Sabna Kotta ◽  
Anroop Nair ◽  
Nimer Alsabeelah
Keyword(s):  
Drug Delivery ◽  
3D Printing ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
Pharmaceutical Manufacturing ◽  
Layer By Layer ◽  
Printing Technology ◽  
Drug Dosing ◽  
3D Printing Technology ◽  
3D Printed

Background: 3D printing technology is a new chapter in pharmaceutical manufacturing and has gained vast interest in the recent past as it offers significant advantages over traditional pharmaceutical processes. Advances in technologies can lead to the design of suitable 3D printing device capable of producing formulations with intended drug release. Methods: This review summarizes the applications of 3D printing technology in various drug delivery systems. The applications are well arranged in different sections like uses in personalized drug dosing, complex drugrelease profiles, personalized topical treatment devices, novel dosage forms and drug delivery devices and 3D printed polypills. Results: This niche technology seems to be a transformative tool with more flexibility in pharmaceutical manufacturing. Typically, 3D printing is a layer-by-layer process having the ability to fabricate 3D formulations by depositing the product components by digital control. This additive manufacturing process can provide tailored and individualized dosing for treatment of patients different backgrounds with varied customs and metabolism pattern. In addition, this printing technology has the capacity for dispensing low volumes with accuracy along with accurate spatial control for customized drug delivery. After the FDA approval of first 3D printed tablet Spritam, the 3D printing technology is extensively explored in the arena of drug delivery. Conclusion: There is enormous scope for this promising technology in designing various delivery systems and provides customized patient-compatible formulations with polypills. The future of this technology will rely on its prospective to provide 3D printing systems capable of manufacturing personalized doses. In nutshell, the 3D approach is likely to revolutionize drug delivery systems to a new level, though need time to evolve.

scholarly journals Comparison of Presurgical Dental Models Manufactured with Two Different Three-Dimensional Printing Techniques

2020 ◽  
Vol 2020 ◽  
pp. 1-6 ◽  
Author(s):  
Marcin Metlerski ◽  
Katarzyna Grocholewicz ◽  
Aleksandra Jaroń ◽  
Mariusz Lipski ◽  
Grzegorz Trybek ◽  
...  
Keyword(s):  
3D Printing ◽  
Oral Surgery ◽  
Three Dimensional ◽  
Mean Deviation ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
Reference Models ◽  
3D Printing Technology ◽  
Dimensional Printing ◽  
Printing Time

Three-dimensional printing is a rapidly developing area of technology and manufacturing in the field of oral surgery. The aim of this study was comparison of presurgical models made by two different types of three-dimensional (3D) printing technology. Digital reference models were printed 10 times using fused deposition modelling (FDM) and digital light processing (DLP) techniques. All 3D printed models were scanned using a technical scanner. The trueness, linear measurements, and printing time were evaluated. The diagnostic models were compared with the reference models using linear and mean deviation for trueness measurements with computer software. Paired t-tests were performed to compare the two types of 3D printing technology. A P value < 0.05 was considered statistically significant. For FDM printing, all average distances between the reference points were smaller than the corresponding distances measured on the reference model. For the DLP models, the average distances in the three measurements were smaller than the original. Only one average distance measurement was greater. The mean deviation for trueness was 0.1775 mm for the FDM group and 0.0861 mm for the DLP group. Mean printing time for a single model was 517.6 minutes in FDM technology and 285.3 minutes in DLP. This study confirms that presurgical models manufactured with FDM and DLP technologies are usable in oral surgery. Our findings will facilitate clinical decision-making regarding the best 3D printing technology to use when planning a surgical procedure.

scholarly journals Three-Dimensional Printing: Custom-Made Implants for Craniomaxillofacial Reconstructive Surgery

2017 ◽  
Vol 10 (2) ◽  
pp. 089-098 ◽  
Author(s):  
Mariana Matias ◽  
Horácio Zenha ◽  
Horácio Costa
Keyword(s):  
3D Printing ◽  
Reconstructive Surgery ◽  
Three Dimensional ◽  
Tactile Feedback ◽  
Current Status ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
3D Printing Technology ◽  
Custom Made ◽  
The Aesthetic

Craniomaxillofacial reconstructive surgery is a challenging field. First it aims to restore primary functions and second to preserve craniofacial anatomical features like symmetry and harmony. Three-dimensional (3D) printed biomodels have been widely adopted in medical fields by providing tactile feedback and a superior appreciation of visuospatial relationship between anatomical structures. Craniomaxillofacial reconstructive surgery was one of the first areas to implement 3D printing technology in their practice. Biomodeling has been used in craniofacial reconstruction of traumatic injuries, congenital disorders, tumor removal, iatrogenic injuries (e.g., decompressive craniectomies), orthognathic surgery, and implantology. 3D printing has proven to improve and enable an optimization of preoperative planning, develop intraoperative guidance tools, reduce operative time, and significantly improve the biofunctional and the aesthetic outcome. This technology has also shown great potential in enriching the teaching of medical students and surgical residents. The aim of this review is to present the current status of 3D printing technology and its practical and innovative applications, specifically in craniomaxillofacial reconstructive surgery, illustrated with two clinical cases where the 3D printing technology was successfully used.

3D PRINTING TECHNOLOGY IN HUMAN ANATOMY MODERN TEACHING AND LEARNING

2019 ◽  
Vol 1 ◽  
pp. 234
Author(s):  
Dzintra Kazoka ◽  
Mara Pilmane
Keyword(s):  
3D Printing ◽  
Teaching And Learning ◽  
Three Dimensional ◽  
Human Anatomy ◽  
Anatomical Models ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Medical Study ◽  
Study Process ◽  
Teaching Learning

There are various combinations of 3D printing technology and medical study process. The aim of this study was to summarize our first experience on 3D printing and outline how 3D printed models can be successfully used in Human Anatomy modern teaching and learning. In 2018 autumn semester, together with traditional methods, a three-dimensional (3D) printing has been introduced into Human Anatomy curriculum at Department of Morphology. In practical classes 39 groups of students from Faculty of Medicine 1st year together with 3 tutors used 3 different open source softwares to create anatomical models and prepared them for printing process. All anatomical models were produced using an FDM 3D printer, a Prusa i3 MK2 (Prusa Research). As methods for data collection were used our observational notes during teaching and learning, analysis of discussions between tutors and students, comments on the preparing and usability of the created and printed models. 3D printing technology offered students a powerful tool for their teaching, learning and creativity, provided possibility to show human body structures or variations. Presented data offered valuable information about current situation and these results were suitable for the further development of the Human Anatomy study course.

Sign in / Sign up

Export Citation Format

Share Document