scholarly journals A Cascaded MEMS Amplitude Demodulator for Large Dynamic Range Application in RF Receiver

Micromachines ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1515
Author(s):  
Hao Yan ◽  
Xiaoping Liao ◽  
Chenglin Li ◽  
Chen Chen
Keyword(s):  
Integrated Circuit ◽  
Microelectromechanical Systems ◽  
Dynamic Range ◽  
Measurement Range ◽  
Large Dynamic Range ◽  
Rf Receiver ◽  
Low Pass ◽  
Power Handling Capability ◽  
Thermoelectric Sensor ◽  
Overload Capacity

An amplitude demodulator with a large dynamic range, based on microelectromechanical systems (MEMS), is proposed in this paper. It is implemented as a cascade of a capacitive and a thermoelectric sensor. Two types of the transducer can improve the measurement range and enhance the overload capacity. This MEMS-based demodulation is realized by utilizing the square law relationship and the low-pass characteristic during the electromechanical and thermoelectric conversion. The fabrication of this device is compatible with the GaAs monolithic microwave integrated circuit (MMIC) process. Experiments show that this MEMS demodulator can realize the direct demodulation of an amplitude modulation (AM) signal with a carrier frequency of 0.35–10 GHz, and cover the power range from 0 to 23 dBm. This MEMS demodulator has the advantages of high power handling capability and zero DC power consumption.

scholarly journals Optical vector analysis with attometer resolution, 90-dB dynamic range and THz bandwidth

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Ting Qing ◽  
Shupeng Li ◽  
Zhenzhou Tang ◽  
Bindong Gao ◽  
Shilong Pan
Keyword(s):  
Measurement Errors ◽  
Dynamic Range ◽  
Frequency Comb ◽  
Optical Probe ◽  
Optical Devices ◽  
Measurement Range ◽  
Original Method ◽  
Vector Analysis ◽  
Probe Signal ◽  
Large Dynamic Range

Abstract Optical vector analysis (OVA) capable of achieving magnitude and phase responses is essential for the fabrication and application of emerging optical devices. Conventional OVA often has to make compromises among resolution, dynamic range, and bandwidth. Here we show an original method to meet the measurement requirements for ultra-wide bandwidth, ultra-high resolution, and ultra-large dynamic range simultaneously, based on an asymmetric optical probe signal generator (ASG) and receiver (ASR). The ASG and ASR remove the measurement errors introduced by the modulation nonlinearity and enable an ultra-large dynamic range. Thanks to the wavelength-independence of the ASG and ASR, the measurement range can increase by 2 N times by applying an N-tone optical frequency comb without complicated operation. In an experiment, OVA with a resolution of 334 Hz (2.67 attometer in the 1550-nm band), a dynamic range of > 90 dB and a measurement range of 1.075 THz is demonstrated.

scholarly journals 1.0 V-0.18 µm CMOS Tunable Low Pass Filters with 73 dB DR for On-Chip Sensing Acquisition Systems

Electronics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 563
Author(s):  
Jorge Pérez-Bailón ◽  
Belén Calvo ◽  
Nicolás Medrano
Keyword(s):  
Power Consumption ◽  
Dynamic Range ◽  
Low Voltage ◽  
Cutoff Frequency ◽  
Cmos Technology ◽  
Active Area ◽  
Current Steering ◽  
Low Pass ◽  
On Chip ◽  
Low Pass Filters

This paper presents a new approach based on the use of a Current Steering (CS) technique for the design of fully integrated Gm–C Low Pass Filters (LPF) with sub-Hz to kHz tunable cut-off frequencies and an enhanced power-area-dynamic range trade-off. The proposed approach has been experimentally validated by two different first-order single-ended LPFs designed in a 0.18 µm CMOS technology powered by a 1.0 V single supply: a folded-OTA based LPF and a mirrored-OTA based LPF. The first one exhibits a constant power consumption of 180 nW at 100 nA bias current with an active area of 0.00135 mm2 and a tunable cutoff frequency that spans over 4 orders of magnitude (~100 mHz–152 Hz @ CL = 50 pF) preserving dynamic figures greater than 78 dB. The second one exhibits a power consumption of 1.75 µW at 500 nA with an active area of 0.0137 mm2 and a tunable cutoff frequency that spans over 5 orders of magnitude (~80 mHz–~1.2 kHz @ CL = 50 pF) preserving a dynamic range greater than 73 dB. Compared with previously reported filters, this proposal is a competitive solution while satisfying the low-voltage low-power on-chip constraints, becoming a preferable choice for general-purpose reconfigurable front-end sensor interfaces.

scholarly journals Coulomb-actuated microbeams revisited: experimental and numerical modal decomposition of the saddle-node bifurcation

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Anton Melnikov ◽  
Hermann A. G. Schenk ◽  
Jorge M. Monsalve ◽  
Franziska Wall ◽  
Michael Stolz ◽  
...  
Keyword(s):  
Finite Element ◽  
Microelectromechanical Systems ◽  
Dynamic Range ◽  
Dynamic Performance ◽  
Major Step ◽  
Element Analysis ◽  
Electrostatic Actuators ◽  
Voltage Range ◽  
Drive Voltage ◽  
Depth Analysis

AbstractElectrostatic micromechanical actuators have numerous applications in science and technology. In many applications, they are operated in a narrow frequency range close to resonance and at a drive voltage of low variation. Recently, new applications, such as microelectromechanical systems (MEMS) microspeakers (µSpeakers), have emerged that require operation over a wide frequency and dynamic range. Simulating the dynamic performance under such circumstances is still highly cumbersome. State-of-the-art finite element analysis struggles with pull-in instability and does not deliver the necessary information about unstable equilibrium states accordingly. Convincing lumped-parameter models amenable to direct physical interpretation are missing. This inhibits the indispensable in-depth analysis of the dynamic stability of such systems. In this paper, we take a major step towards mending the situation. By combining the finite element method (FEM) with an arc-length solver, we obtain the full bifurcation diagram for electrostatic actuators based on prismatic Euler-Bernoulli beams. A subsequent modal analysis then shows that within very narrow error margins, it is exclusively the lowest Euler-Bernoulli eigenmode that dominates the beam physics over the entire relevant drive voltage range. An experiment directly recording the deflection profile of a MEMS microbeam is performed and confirms the numerical findings with astonishing precision. This enables modeling the system using a single spatial degree of freedom.

scholarly journals In-Process Diameter Measurement Technique for Micro-Optical Fiber with Standing Wave Illumination

2021 ◽  
Author(s):  
Masaki Michihata ◽  
Zhao Zheng ◽  
Daiki Funaiwa ◽  
Sojiro Murakami ◽  
Shotaro Kadoya ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Standing Wave ◽  
Dynamic Range ◽  
Scattered Light ◽  
High Dynamic Range ◽  
Measurement Range ◽  
Diameter Distribution ◽  
Process Measurement ◽  
Air Turbulence ◽  
Tapered Optical Fiber

AbstractIn this paper, we propose an in-process measurement method of the diameter of micro-optical fiber such as a tapered optical fiber. The proposed technique is based on analyzing optically scattered light generated by standing wave illumination. The proposed method is significant in that it requires an only limited measurement range and does not require a high dynamic range sensor. These properties are suitable for in-process measurement. This experiment verified that the proposed method could measure a fiber diameter as stable as ± 0.01 μm under an air turbulence environment. As a result of comparing the measured diameter distribution with those by scanning electron microscopy, it was confirmed that the proposed method has a measurement accuracy better than several hundred nanometers.

scholarly journals A Low-g MEMS Accelerometer with High Sensitivity, Low Nonlinearity and Large Dynamic Range Based on Mode-Localization of 3-DoF Weakly Coupled Resonators

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 310
Author(s):  
Muhammad Mubasher Saleem ◽  
Shayaan Saghir ◽  
Syed Ali Raza Bukhari ◽  
Amir Hamza ◽  
Rana Iqtidar Shakoor ◽  
...  
Keyword(s):  
Microelectromechanical Systems ◽  
Dynamic Range ◽  
Proof Mass ◽  
Amplitude Ratio ◽  
Silicon On Insulator ◽  
Coupled Resonators ◽  
Mode Localization ◽  
Mems Accelerometer ◽  
Weakly Coupled ◽  
Input Acceleration

This paper presents a new design of microelectromechanical systems (MEMS) based low-g accelerometer utilizing mode-localization effect in the three degree-of-freedom (3-DoF) weakly coupled MEMS resonators. Two sets of the 3-DoF mechanically coupled resonators are used on either side of the single proof mass and difference in the amplitude ratio of two resonator sets is considered as an output metric for the input acceleration measurement. The proof mass is electrostatically coupled to the perturbation resonators and for the sensitivity and input dynamic range tuning of MEMS accelerometer, electrostatic electrodes are used with each resonator in two sets of 3-DoF coupled resonators. The MEMS accelerometer is designed considering the foundry process constraints of silicon-on-insulator multi-user MEMS processes (SOIMUMPs). The performance of the MEMS accelerometer is analyzed through finite-element-method (FEM) based simulations. The sensitivity of the MEMS accelerometer in terms of amplitude ratio difference is obtained as 10.61/g for an input acceleration range of ±2 g with thermomechanical noise based resolution of 0.22 and nonlinearity less than 0.5%.

Sign in / Sign up

Export Citation Format

Share Document