scholarly journals Synthesis, Characterization and Magnetic Hyperthermia of Monodispersed Cobalt Ferrite Nanoparticles for Cancer Therapeutics

Molecules ◽  
2020 ◽  
Vol 25 (19) ◽  
pp. 4428
Author(s):  
Mauricio A. Medina ◽  
Goldie Oza ◽  
A. Ángeles-Pascual ◽  
Marlene González M. ◽  
R. Antaño-López ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Cobalt Ferrite ◽  
Magnetic Measurements ◽  
Cancer Therapeutics ◽  
Physiological Saline ◽  
Dark Field ◽  
Ferrite Nanoparticles ◽  
Cobalt Ferrite Nanoparticles ◽  
Transmission Electron

Magnetic nanoparticles such as cobalt ferrite are investigated under clinical hyperthermia conditions for the treatment of cancer. Cobalt ferrite nanoparticles (CFNPs) synthesized by the thermal decomposition method, using nonionic surfactant Triton-X100, possess hydrophilic polyethylene oxide chains acting as reducing agents for the cobalt and iron precursors. The monodispersed nanoparticles were of 10 nm size, as confirmed by high-resolution transmission electron microscopy (HR-TEM). The X-ray diffraction patterns of CFNPs prove the existence of cubic spinel cobalt ferrites. Cs-corrected scanning transmission electron microscopy–high-angle annular dark-field imaging (STEM–HAADF) of CFNPs confirmed their multi-twinned crystallinity due to the presence of atomic columns and defects in the nanostructure. Magnetic measurements proved that the CFNPs possess reduced remnant magnetization (MR/MS) (0.86), which justifies cubic anisotropy in the system. Microwave-based hyperthermia studies performed at 2.45 GHz under clinical conditions in physiological saline increased the temperature of the CFNP samples due to the transformation of radiation energy to heat. The specific absorption rate of CFNPs in physiological saline was 68.28 W/g. Furthermore, when triple-negative breast cancer cells (TNBC) in the presence of increasing CFNP concentration (5 mg/mL to 40 mg/mL) were exposed to microwaves, the cell cytotoxicity was enhanced compared to CFNPs alone.

scholarly journals Antibacterial and Antifungal Activity of Novel Synthesized Neodymium-Substituted Cobalt Ferrite Nanoparticles for Biomedical Application

Processes ◽  
2019 ◽  
Vol 7 (10) ◽  
pp. 714 ◽  
Author(s):  
Rehman ◽  
Ansari ◽  
Alzohairy ◽  
Alomary ◽  
Jermy ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Survival Rate ◽  
Cobalt Ferrite ◽  
Biomedical Application ◽  
Ferrite Nanoparticles ◽  
Sonochemical Method ◽  
Cobalt Ferrite Nanoparticles ◽  
Transmission Electron ◽  
Antistaphylococcal Activity ◽  
Antibacterial And Antifungal

Neodymium (Nd)-substituted cobalt ferrite nanoparticles (NPs), i.e., CoNdxFe2−xO4 (0.0 ≤ x ≤ 0.2) NPs, were synthesized by the sonochemical method. The compositional characterization was done by scanning electron microscopy (SEM) equipped with energy-dispersive X-ray spectroscopy (EDX) and transmission electron microscopy (TEM). Antistaphylococcal activity was found to be enhanced, i.e., survival rate was 50%, 45%, 40%, and 30% with the increase in the ratio of Nd (0.0 ≤ x ≤ 0.2), whereas anticandidal activity was found efficient, i.e., 9%, 20%, 22%, and 40% survival rate at all the four ratios. The morphogenesis studies indicated that the synthesized metal–ligand, improves the antimicrobial capacity by binding them strongly to the microbial walls. To the best of our knowledge, this is the first report which demonstrates the series of CoNdxFe2−xO4 (0.0 ≤ x ≤ 0.2) NPs being active towards Staphylococcus aureus and Candida albicans and encourages its potential candidature for pharmaceutical and biomedical purposes.

Intergrowth of niobium tungsten oxides of the tetragonal tungsten bronze type

2020 ◽  
Vol 75 (11) ◽  
pp. 913-919
Author(s):  
Frank Krumeich
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Tungsten Bronze ◽  
Structural Complexity ◽  
Dark Field ◽  
Tetragonal Tungsten Bronze ◽  
Tungsten Oxides ◽  
Transmission Electron ◽  
Scanning Transmission

AbstractSince the 1970s, high-resolution transmission electron microscopy (HRTEM) is well established as the most appropriate method to explore the structural complexity of niobium tungsten oxides. Today, scanning transmission electron microscopy (STEM) represents an important alternative for performing the structural characterization of such oxides. STEM images recorded with a high-angle annular dark field (HAADF) detector provide not only information about the cation positions but also about the distribution of niobium and tungsten as the intensity is directly correlated to the local scattering potential. The applicability of this method is demonstrated here for the characterization of the real structure of Nb7W10O47.5. This sample contains well-ordered domains of Nb8W9O47 and Nb4W7O31 besides little ordered areas according to HRTEM results. Structural models for Nb4W7O31 and twinning occurring in this phase have been derived from the interpretation of HAADF-STEM images. A remarkable grain boundary between well-ordered domains of Nb4W7O31 and Nb8W9O47 has been found that contains one-dimensionally periodic features. Furthermore, short-range order observed in less ordered areas could be attributed to an intimate intergrowth of small sections of different tetragonal tungsten bronze (TTB) based structures.

Atomic-scale structural and compositional analyses of Ruddlesden-Popper planar faults in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics

2009 ◽  
Vol 24 (8) ◽  
pp. 2596-2604 ◽  
Author(s):  
Sašo Šturm ◽  
Makoto Shiojiri ◽  
Miran Čeh
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Atomic Scale ◽  
Transmission Electron ◽  
Initial Stage ◽  
Final Microstructure ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

The microstructure in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics is strongly affected by the formation of Ruddlesden-Popper fault–rich (RP fault) lamellae, which are coherently intergrown with the matrix of the perovskite grains. We studied the structure and chemistry of RP faults by applying quantitative high-resolution transmission electron microscopy and high-angle annular dark-field scanning transmission electron microscopy analyses. We showed that the Sr2+ and Ca2+ dopant ions form RP faults during the initial stage of sintering. The final microstructure showed preferentially grown RP fault lamellae embedded in the central part of the anisotropic perovskite grains. In contrast, the dopant Ba2+ ions preferably substituted for Sr2+ in the SrTiO3 matrix by forming a BaxSr1−xTiO3 solid solution. The surplus of Sr2+ ions was compensated structurally in the later stages of sintering by the formation of SrO-rich RP faults. The resulting microstructure showed RP fault lamellae located at the surface of equiaxed BaxSr1-xTiO3 perovskite grains.

scholarly journals Analytical High-resolution Electron Microscopy Reveals Organ-specific Nanoceria Bioprocessing

2017 ◽  
Vol 46 (1) ◽  
pp. 47-61 ◽  
Author(s):  
Uschi M. Graham ◽  
Robert A. Yokel ◽  
Alan K. Dozier ◽  
Lawrence Drummy ◽  
Krishnamurthy Mahalingam ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Analytical Electron Microscopy ◽  
High Resolution Electron Microscopy ◽  
Dark Field ◽  
Transmission Electron ◽  
Analytical Electron ◽  
Organ Specific

This is the first utilization of advanced analytical electron microscopy methods, including high-resolution transmission electron microscopy, high-angle annular dark field scanning transmission electron microscopy, electron energy loss spectroscopy, and energy-dispersive X-ray spectroscopy mapping to characterize the organ-specific bioprocessing of a relatively inert nanomaterial (nanoceria). Liver and spleen samples from rats given a single intravenous infusion of nanoceria were obtained after prolonged (90 days) in vivo exposure. These advanced analytical electron microscopy methods were applied to elucidate the organ-specific cellular and subcellular fate of nanoceria after its uptake. Nanoceria is bioprocessed differently in the spleen than in the liver.

scholarly journals Transmission electron microscopy analysis of the crystallography of precipitates in Mg–Sn alloys aged at high temperatures

2014 ◽  
Vol 47 (5) ◽  
pp. 1729-1735 ◽  
Author(s):  
Xin Nie ◽  
Yimin Guan ◽  
Dongshan Zhao ◽  
Yu Liu ◽  
Jianian Gui ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Three Dimensional ◽  
Dark Field ◽  
Peak Hardness ◽  
Invariant Line ◽  
Orientation Relationships ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Annular Dark Field

The crystallographic orientation relationships (ORs) of precipitated β-Mg2Sn particles in Mg–9.76 wt% Sn alloy aged at 573 K for 5 h, corresponding to its peak hardness, were investigated by advanced transmission electron microscopy (TEM). OR-3 of (110)β//(0001)αand [\overline 111]β//[1\overline 210]αand OR-4 of (110)β//(0001)αand [001]β//[2\overline 1\overline 10]αare the key ORs of β-Mg2Sn particles in the alloy. The proportions of β-Mg2Sn particles exhibiting OR-3 and OR-4 were determined as 75.1 and 24.3%, respectively. Crystallographic factors determined the predominance of OR-3 in the precipitated β-Mg2Sn particles. This mechanism was analyzed by a three-dimensional invariant line model constructed using a transformation matrix in reciprocal space. Models of the interface of precipitated β-Mg2Sn and the α-Mg matrix were constructedviahigh-resolution TEM and atomic resolution high-angle annular dark-field scanning TEM.

scholarly journals Ru Catalyst Encapsulated into the Pores of MIL-101 MOF: Direct Visualization by TEM

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4531
Author(s):  
Maria Meledina ◽  
Geert Watson ◽  
Alexander Meledin ◽  
Pascal Van Der Voort ◽  
Joachim Mayer ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Scanning Transmission Electron Microscopy ◽  
Dark Field ◽  
Catalyst Nanoparticles ◽  
Ru Catalyst ◽  
Ru Nanoparticles ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Annular Dark Field

Ru catalyst nanoparticles were encapsulated into the pores of a Cr-based metal-organic framework (MOF)—MIL-101. The obtained material, as well as the non-loaded MIL-101, were investigated down to the atomic scale by annular dark-field scanning transmission electron microscopy using low dose conditions and fast image acquisition. The results directly show that the used wet chemistry loading approach is well-fitted for the accurate embedding of the individual catalyst nanoparticles into the cages of the MIL-101. The MIL-101 host material remains crystalline after the loading procedure, and the encapsulated Ru nanoparticles have a metallic nature. Annular dark field scanning transmission electron microscopy, combined with EDX mapping, is a perfect tool to directly characterize both the embedded nanoparticles and the loaded nanoscale MOFs. The resulting nanostructure of the material is promising because the Ru nanoparticles hosted in the MIL-101 pores are prevented from agglomeration—the stability and lifetime of the catalyst could be improved.

Determination of Nanocluster Sizes from Dark-Field Scanning Transmission Electron Microscopy Images

2008 ◽  
Vol 112 (6) ◽  
pp. 1759-1763 ◽  
Author(s):  
Norihiko L. Okamoto ◽  
Bryan W. Reed ◽  
Shareghe Mehraeen ◽  
Apoorva Kulkarni ◽  
David Gene Morgan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Scanning Transmission Electron Microscopy ◽  
Dark Field ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Microscopy Images

The Crystal Structure of the β’-Phase Including Ag in Al-Mg-Si-Ag Alloy

2011 ◽  
Vol 409 ◽  
pp. 67-70 ◽  
Author(s):  
Junya Nakamura ◽  
Kenji Matsuda ◽  
Tatsuo Sato ◽  
Calin D. Marioara ◽  
Sigmund J. Andersen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Unit Cell ◽  
Atomic Column ◽  
Direction Parallel ◽  
Ag Addition ◽  
Domain Structures ◽  
Β Phase ◽  
Transmission Electron

In the present work, b’ phase in alloys Al -1.0 mass% Mg2Si -0.5 mass% Ag (Ag-addition) and Al -1.0 mass% Mg2Si (base) was investigated by high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) to understand the effect of Ag addition. The b’ phase is rod-shape with the longest direction parallel to <001>Al. HRTEM images and SAED patterns obtained along the direction were similar for the b’ phase in both alloys. The unit cell of b’-phase in Ag-addition alloy is hexagonal with the same c-axis dimension as the Ag-free b’, but shorter a-axis. Ag was found in the composition of the rod-shaped precipitates in Ag-addition alloy by energy dispersive X-ray spectroscopy (EDS). In addition, the distribution of Ag was investigated by energy filtered mapping and high annular angular dark field scanning transmission electron microscopy (HAADF-STEM). The Ag-containing atomic column was observed in every b’ unit cell, and the unit cell symmetry is slightly changed as compared with the Ag-free b’. The Ag-containing b’ rods have complicated domain structures. The interfaces of these particles are enriched with Ag atoms that occupy the lattice positions in the Al matrix. The occupancy of the Ag-containing atomic columns seem to vary both inside particles, as well as at the interfaces.

Sign in / Sign up

Export Citation Format

Share Document