scholarly journals X-ray and Thermal Analysis of Selected Drugs Containing Acetaminophen

Molecules ◽  
2020 ◽  
Vol 25 (24) ◽  
pp. 5909
Author(s):  
Izabela Jendrzejewska ◽  
Tomasz Goryczka ◽  
Ewa Pietrasik ◽  
Joanna Klimontko ◽  
Josef Jampilek
Keyword(s):  
Thermal Analysis ◽  
Pharmaceutical Preparations ◽  
Active Pharmaceutical Ingredient ◽  
Polymorphic Form ◽  
Scanning Calorimetry ◽  
Monoclinic System ◽  
X Ray ◽  
Line Intensities ◽  
Diffraction Patterns ◽  
Medicinal Drugs

Studies carried out by X-ray and thermal analysis confirmed that acetaminophen (paracetamol), declared by the manufacturers as an Active Pharmaceutical Ingredient (API), was present in all studied medicinal drugs. Positions of diffraction lines (2θ angles) of the studied drugs were consistent with standards for acetaminophen, available in the ICDD PDF database Release 2008. |Δ2θ| values were lower than 0.2°, confirming the authenticity of the studied drugs. Also, the values of interplanar distances dhkl for the examined samples were consistent with those present in the ICDD. Presence of acetaminophen crystalising in the monoclinic system (form I) was confirmed. Various line intensities for API were observed in the obtained diffraction patterns, indicating presence of the preferred orientation of the crystallites in the examined samples. Thermal analysis of the studied substances confirmed the results obtained by X-ray analysis. Drugs containing only acetaminophen as an API have melting point close to that of pure acetaminophen. It was found that presence of other active and auxiliary substances affected the shapes and positions of endothermal peaks significantly. A broadening of endothermal peaks and their shift towards lower temperatures were observed accompanying an increase in the contents of additional substances being “impurities” in relation to the API. The results obtained by a combination of the two methods, X-ray powder diffraction (XRPD) and differential scanning calorimetry/thermogravimetry (DSC/TGA), may be useful in determination of abnormalities which can occur in pharmaceutical preparations, e.g., for distinguishing original drugs and forged products, detection of the presence of a proper polymorphic form or too low content of the active substance in the investigated drug.

scholarly journals The Usefulness of X-ray Diffraction and Thermal Analysis to Study Dietary Supplements Containing Iron

Molecules ◽  
2021 ◽  
Vol 27 (1) ◽  
pp. 197
Author(s):  
Izabela Jendrzejewska ◽  
Robert Musioł ◽  
Tomasz Goryczka ◽  
Ewa Pietrasik ◽  
Joanna Klimontko ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Melting Point ◽  
Dietary Supplements ◽  
Polymorphic Form ◽  
Food Supplements ◽  
X Ray Diffraction ◽  
Iron Compounds ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Amorphous Compounds

X-ray powder diffraction (XRPD) and thermal analysis (differential scanning calorimetry/derivative of thermogravimetry (DSC/DTG)) are solid-state techniques that can be successfully used to identify and quantify various chemical compounds in polycrystalline mixtures, such as dietary supplements or drugs. In this work, 31 dietary supplements available on the Polish market that contain iron compounds, namely iron gluconate, fumarate, bisglycinate, citrate and pyrophosphate, were evaluated. The aim of the work was to identify iron compounds declared by the manufacturer as food supplements and to try to verify compliance with the manufacturer’s claims. Studies performed by X-ray and thermal analysis confirmed that crystalline iron compounds (iron (II) gluconate, iron (II) fumarate), declared by the manufacturers, were present in the investigated dietary supplements. Iron (II) bisglycinate proved to be semi-crystalline. However, depending on the composition of the formulation, it was possible to identify this compound in the tested supplements. For amorphous iron compounds (iron (III) citrate and iron (III) pyrophosphate), the diffraction pattern does not have characteristic diffraction lines. Food supplements containing crystalline iron compounds have a melting point close to the melting point of pure iron compounds. The presence of excipients was found to affect the shapes and positions of the endothermic peaks significantly. Widening of endothermic peaks and changes in their position were observed, as well as exothermic peaks indicating crystallization of amorphous compounds. Weight loss was determined for all dietary supplements tested. Analysis of the DTG curves showed that the thermal decomposition of most food supplements takes place in several steps. The results obtained by a combination of both simple, relatively fast and reliable XRPD and DSC/DTG methods are helpful in determining phase composition, pharmaceutical abnormalities or by detecting the presence of the correct polymorphic form.

Structure and properties of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)/poly(L-lactic acid) quasi core/sheath melt-electrospun microfibers

2018 ◽  
Vol 89 (9) ◽  
pp. 1770-1781 ◽  
Author(s):  
Huaizhong Xu ◽  
Benedict Bauer ◽  
Masaki Yamamoto ◽  
Hideki Yamane
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Lactic Acid ◽  
Tensile Tests ◽  
Processing Parameters ◽  
Structure And Properties ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Diffraction Patterns

A facile route was proposed to fabricate core–sheath microfibers, and the relationships among processing parameters, crystalline structures and the mechanical properties were investigated. The compression molded poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH)/poly(L-lactic acid) (PLLA) strip enhanced the spinnability of PHBH and the mechanical properties of PLLA as well. The core–sheath ratio of the fibers was determined by the prefab strip, while the PLLA sheath component did not completely cover the PHBH core component due to the weak interfacial tension between the melts of PHBH and PLLA. A rotational target was applied to collect aligned fibers, which were further drawn in a water bath. The tensile strength and the modulus of as-spun and drawn fibers increased with increasing the take-up velocities. When the take-up velocity was above 500 m/min, the jet became unstable and started to break up at the tip of the Taylor cone, decreasing the mechanical properties of the fibers. The drawing process facilitated the crystallization of PLLA and PHBH, and the tensile strength and the modulus increased linearly with the increasing the draw ratio. The crystal information displayed from wide-angle X-ray diffraction patterns and differential scanning calorimetry heating curves supported the results of the tensile tests.

scholarly journals Mechanochemical Formation of Racemic Praziquantel Hemihydrate with Improved Biopharmaceutical Properties

Pharmaceutics ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 289
Author(s):  
Debora Zanolla ◽  
Dritan Hasa ◽  
Mihails Arhangelskis ◽  
Gabriela Schneider-Rauber ◽  
Michele R. Chierotti ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Polymorphic Form ◽  
In Vitro Tests ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Experimental Conditions ◽  
Intrinsic Dissolution ◽  
Intrinsic Dissolution Rate ◽  
X Ray ◽  
Enhanced Solubility

Praziquantel (PZQ) is the first-line drug used against schistosomiasis, one of the most common parasitic diseases in the world. A series of crystalline structures including two new polymorphs of the pure drug and a series of cocrystals of PZQ have been discovered and deposited in the Cambridge Structural Database (CSD). This work adds to the list of multicomponent forms of PZQ a relevant example of a racemic hemihydrate (PZQ-HH), obtainable from commercial PZQ (polymorphic Form A) through mechanochemistry. Noteworthy, the formation of the new hemihydrate strongly depends on the initial polymorphic form of PZQ and on the experimental conditions used. The new PZQ-HH has been fully characterized by means of HPLC, Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), Hot-Stage Microscopy (SEM), Powder X-Ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), FT-IR, polarimetry, solid-state NMR (SS-NMR), solubility and intrinsic dissolution rate (IDR), and in vitro tests on Schistosoma mansoni adults. The crystal structure was solved from the powder X-ray diffraction pattern and validated by periodic-DFT calculations. The new bioactive hemihydrate was physically stable for three months and showed peculiar biopharmaceutical features including enhanced solubility and a double intrinsic dissolution rate in water in comparison to the commercially available PZQ Form A.

scholarly journals Compression-Induced Phase Transitions of Bicalutamide

Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 438 ◽  
Author(s):  
Joanna Szafraniec-Szczęsny ◽  
Agata Antosik-Rogóż ◽  
Justyna Knapik-Kowalczuk ◽  
Mateusz Kurek ◽  
Ewa Szefer ◽  
...  
Keyword(s):  
Solid Dispersions ◽  
Amorphous Solid ◽  
Active Pharmaceutical Ingredient ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Amorphous Solid Dispersions ◽  
X Ray ◽  
High Propensity ◽  
Poorly Soluble ◽  
Amorphous Drug

The formation of solid dispersions with the amorphous drug dispersed in the polymeric matrix improves the dissolution characteristics of poorly soluble drugs. Although they provide an improved absorption after oral administration, the recrystallization, which can occur upon absorption of moisture or during solidification and other formulation stages, serves as a major challenge. This work aims at understanding the amorphization-recrystallization changes of bicalutamide. Amorphous solid dispersions with poly(vinylpyrrolidone-co-vinyl acetate) (PVP/VA) were obtained by either ball milling or spray drying. The applied processes led to drug amorphization as confirmed using X-ray diffraction and differential scanning calorimetry. Due to a high propensity towards mechanical activation, the changes of the crystal structure of physical blends of active pharmaceutical ingredient (API) and polymer upon pressure were also examined. The compression led to drug amorphization or transition from form I to form II polymorph, depending on the composition and applied force. The formation of hydrogen bonds confirmed using infrared spectroscopy and high miscibility of drug and polymer determined using non-isothermal dielectric measurements contributed to the high stability of amorphous solid dispersions. They exhibited improved wettability and dissolution enhanced by 2.5- to 11-fold in comparison with the crystalline drug. The drug remained amorphous upon compression when the content of PVP/VA in solid dispersions exceeded 20% or 33%, in the case of spray-dried and milled systems, respectively.

New crystal structures in the realm of 5,5′-azotetrazolates

2015 ◽  
Vol 70 (2) ◽  
pp. 125-134 ◽  
Author(s):  
Martin Lampl ◽  
Gerhard Laus ◽  
Doris E. Braun ◽  
Volker Kahlenberg ◽  
Klaus Wurst ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Single Crystal ◽  
Crystal Structures ◽  
Organic Cations ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Diffraction Patterns

AbstractThe preparation of six new 5,5′-azotetrazolates with organic cations is reported. Differential scanning calorimetry of all compounds showed exothermic decompositions. The crystal structures of the six 5,5′-azotetrazolates were determined by single-crystal X-ray diffraction analyses. The phase purities of the bulk samples were confirmed by Pawley fits of the experimental and calculated powder X-ray diffraction patterns.

Synthesis, Characterization and Magnetism of Nanosized Copper Ferrite

2008 ◽  
Vol 368-372 ◽  
pp. 604-606 ◽  
Author(s):  
Wei Zhong Lv ◽  
Zhong Kuang Luo ◽  
Bo Liu ◽  
Xiang Zhong Ren ◽  
Hong Hua Cai ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Copper Ferrite ◽  
Sonochemical Method ◽  
Thermal Gravimetric ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ft Ir ◽  
Scanning Electron

Copper ferrite powders were successfully synthesized by sonochemical method. The resultant powders were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), FT-IR, differential thermal analysis-thermal gravimetric (DTA-TG), differential scanning calorimetry (DSC) and VSM. The particle saturation magnetization (Ms) is 66 emu/g and an intrinsic coercive force (iHc) is 2100 Oe when the precursor calcined at 950 °C for 15 h.

Manufacture of Ternary Solid Dispersions Composed of Nifedipine, Eudragit® E and Adsorbent

2011 ◽  
Vol 317-319 ◽  
pp. 185-188 ◽  
Author(s):  
Pornsak Sriamornsak ◽  
Srisuda Kontong ◽  
Yotsanan Weerapol ◽  
Jurairat Nunthanid ◽  
Srisagul Sungthongjeen ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersions ◽  
Ternary Systems ◽  
Dissolution Enhancement ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ternary Solid Dispersions ◽  
Diffraction Patterns ◽  
Physical Mixtures

The aim of this study was to manufacture the ternary solid dispersions composed of nifedipine, Eudragit® E and adsorbent. Dissolution enhancement of nifedipine was also investigated. The inert solid carriers were added in the mixtures of nifedipine and Eudragit® E at varying ratios. The physicochemical properties of ternary systems, compared to physical mixtures, were analyzed using powder x-ray diffraction (PXRD) and differential scanning calorimetry (DSC). The dissolution of nifedipine from ternary systems was compared to the drug alone. The influence of drug:polymer: adsorbent ratio and type of adsorbent on the dissolution rate of the drug was also evaluated. The PXRD and DSC results of the systems with high amount of polymer showed that the drug was present in an amorphous form. On the other hand, the diffraction patterns and DSC thermograms of the physical mixtures revealed that to some extent the drug was present in a crystalline form. The results from this study demonstrated that an improvement in dissolution rate of nifedipine with Eudragit® E and adsorbents was obtained.

scholarly journals Physical Mixture Interaction of Acetaminophenol with Naringenin

2018 ◽  
Vol 18 (1) ◽  
pp. 18 ◽  
Author(s):  
Normyzatul Akmal Abd Malek ◽  
Hamizah Mohd Zaki ◽  
Mohammad Noor Jalil
Keyword(s):  
Interaction Strength ◽  
Active Pharmaceutical Ingredient ◽  
Binary Interaction ◽  
Molar Ratio ◽  
Attenuated Total Reflectance ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Mixture Ratio ◽  
X Ray ◽  
New Phase

The interaction of Active Pharmaceutical Ingredient (API) with other compounds will affect drugs stability, toxicity, modified dissolution profiles or may form a new compound with the different crystal structure. Acetaminophenol (APAP), the most common drug used widely (also known as Panadol) was mixed with Naringenin (NR) to glance for a new phase of interactions leading to new compound phase. The amide-acid supramolecular heterosynthon; N-H…O interaction between acid and the respective base were observed in the APAP-NR mixture blends. The interaction was prepared by the binary interaction from neat grinding and liquid-assisted grinding techniques at a different stoichiometry of binary mixture ratio of APAP-NR which were 1:1, 1:2 and 2:1 molar ratio. The interaction was estimated using Group Contribution Method (GCM) and physicochemical properties were characterized by Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR), powder X-ray diffraction (PXRD) and Differential Scanning Calorimetry (DSC) analysis. The GCM calculation gave good interaction strength at 212.93 MPa1/2. The ATR-FTIR, DSC and PXRD results obtained revealed an interaction with new phase formed.

Synthesis, crystal structure, and X-ray diffraction data of lithium m-phenylenediamine sulfate Li2(C6H10N2)(SO4)2

2021 ◽  
pp. 1-5
Author(s):  
Junyan Zhou ◽  
Congcong Chai ◽  
Munan Hao ◽  
Xin Zhong
Keyword(s):  
Crystal Structure ◽  
Diffraction Data ◽  
Structural Phase ◽  
Measured Temperature ◽  
X Ray Diffraction ◽  
Monoclinic System ◽  
X Ray ◽  
Cell Parameters ◽  
Anisotropic Expansion ◽  
Diffraction Patterns

A new organic–inorganic hybrid lithium m-phenylenediamine sulfate (LPS), Li2(C6H10N2)(SO4)2, was synthesized under aqueous solution conditions. The X-ray powder diffraction study determined that the title compound crystallized in a monoclinic system at 300 K, with unit-cell parameters a = 7.8689(6) Å, b = 6.6353(5) Å, c = 11.8322(10) Å, β = 109.385(3) °, V = 582.77(8) Å3. Indexing of the diffraction patterns collected from 100 to 600 K reveals that LPS has no structural phase transition within the measured temperature range, and the volume expansion coefficient is approximately 2.79 × 10−5 K−1. The crystal structure was solved based on the single-crystal diffraction data with space group P21/m. Lithium and SO42− are found to form quasi-two-dimensional anti-fluorite [LiSO4] layers stacking along the c-axis, with m-phenylenediamine molecules inserted in the anti-fluorite layers and forming hydrogen bonds to the SO42−. This explains a moderate anisotropic expansion in LPS.

scholarly journals Synthesis, characterization and thermal behaviour of solid-state compounds of 4-methoxybenzoate with lanthanum (III) and trivalent lighter lanthanides

2006 ◽  
Vol 31 (1) ◽  
pp. 21-30 ◽  
Author(s):  
E. C. Rodrigues ◽  
A. B. Siqueira ◽  
E. Y. Ionashiro ◽  
G. Bannach ◽  
M. Ionashiro
Keyword(s):  
Thermal Analysis ◽  
Differential Scanning Calorimetry ◽  
Thermal Decomposition ◽  
Differential Thermal Analysis ◽  
Solid State ◽  
Thermal Behaviour ◽  
Polymorphic Transformation ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Lighter Lanthanides

Solid-state M-4-MeO-Bz compounds, where M stands for trivalent La, Ce, Pr, Nd and Sm and 4-MeO-Bz is 4-methoxybenzoate, have been synthesized. Simultaneous thermogravimetry and differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), X-ray powder diffractometry, infrared spectroscopy and complexometry were used to characterize and to study the thermal behaviour of these compounds. The results led to information about the composition, dehydration, polymorphic transformation, ligand's denticity, thermal behaviour and thermal decomposition of the isolated compounds.

Sign in / Sign up

Export Citation Format

Share Document