Optical Characterization of Quinoline Yellow Fluorochemosensors for Analyzing Its Photonics Applications With Synthesized Nano Particles

Quinoline Yellow (QY) with the scientific name [sodium 2-(2, 3-dihydro-1,3-dioxo-1H-inden-2-yl) quinoline-6,8-disulfonate] (SQDS) is investigated for its sensing properties as fluorochemosensors and its NLO applications. Pure SQDS is doped with copper ferrite and cerium oxide nanoparticles and studied for changes in spectral results. Change in absorption spectrum is observed depending on the polarity of solvents. Intensity of fluorescence also varies with different type of solvents. Optical characterization for SQDS is carried out via various spectroscopic techniques including UV-VIS spectroscopy, FTIR spectroscopy, Scanning Electron Microscopy and Photo Luminescence (PL) spectroscopy. Optical parameters like extinction coefficient, refractive index and bandgap energy are determined from absorption spectrum for both solution and film samples. XRD characterization is also performed for QY and for nanoparticle doped QY. For investigating Non-Linear optical (NLO) application of QY, films are prepared and optical imaging is performed via Atomic Force Microscopy (AFM). Characterization results are analysed and predicted for application in non-linear optics.

Preparation of magnetic copper ferrite nanoparticle as peroxymonosulfate activating catalyst for effective degradation of levofloxacin

The magnetic CuFe2O4 nanoparticles were successfully synthesized with a coprecipitation method at 500 °C calcination temperature, which were utilized to degrade levofloxacin (LEV) as peroxymonosulfate (PMS) activator. The structure and composition of nanocatalyst were characterized by a series of methods, including Scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, Vibrating sample magnetometer and Thermogravimetric analysis. The effect of the PMS concentration, the catalyst dosage, the LEV initial concentration, the pH value and the inorganic anions on the LEV degradation was also explored. The results revealed that the designed CuFe2O4/PMS system had high activity and excellent stability in the complex conditions. The degradation efficiency of LEV still reached above 80% after four recycles of CuFe2O4 catalyst. The reactive species quenching experiments and electron paramagnetic resonance analysis suggested the existence of superoxide radicals, single oxygen, hydroxy radicals and sulfate radicals, and the first two were dominant radical oxygen species. Based on the mechanism analyses, the efficient degradation of LEV was probably due to the continuous generation of reactive species under the condition of Fe (III)/Fe (II) and Cu (II)/Cu (I) redox cycles. The research provided a reasonable reference for the PMS activation mechanism based spinel-type ferrite catalysis.

Study on the synthesis of 1,3,5-triazinane derivatives on copper-ferrite nanoparticles catalyst

A high efficient method for the synthesis of 1,3,5-triaryltriazinane derivatives is developed by the condensation reaction of amines and formaldehyde followed by spontaneous cyclotrimerization using CuFe2O4 NPs as an environmentally benign catalyst at room temperature. The copper ferrite was easily separated, reused in good repetitive catalytic performance by simple filtration or external magnet. This process was efficient and compatible with wide range of amines to afford a direct access to nitrogen containing compounds in excellent yields up to 99% and high selectivity.

Wastewater treatment of industrial enterprises from copper compounds by feritization

The article is devoted to solving an urgent problem - the development of effective methods of water purification from heavy metal ions from industrial wastewater. Today more emphasis on technologies that allow recycling of precious metals, the organization of return water supply and receipt safe disposal of sludge. Experimental studies of copper ions extraction from industrial wastewater of galvanic production by ferritization method have been carried out. The process of formation of ferromagnetic compounds of copper and iron has been studied. The results of X-ray diffraction analysis of the mineralogical composition of the samples and phase transformations that occur during aging and during the experiment are presented. The lattice constant of the α-ferite phase is calculated. X-ray diffraction analysis confirmed the presence of ferite compounds and metallic copper. In this case, in the process of "aging" of the samples, the amount of the ferrite phase and metallic copper increases. Electron microscopic analysis confirmed that in the surface layer changed due to the formation of new phases, copper-containing iron oxides, the formation of cement copper and cuprospinel simultaneously exist. The influence on the course of the ferritization process of its conditions - the concentration and ratio of copper and iron ions, temperature, pH of the medium, the consumption of oxidant - oxygen is studied. The optimal parameters of the ferritization process for wastewater treatment from copper with an initial concentration of up to 10 g / l are determined. The possibility of formation of copper ferrite without aeration at a temperature of 200 C is shown. The study of physicochemical properties of sediments formed during ferritization is performed. Studies have shown that the residual concentration of copper in the solution after the application of the proposed technology is in the range from 0.14 to 0.6 mg / l. The efficiency of copper removal is 99.98%. It is established that at the process temperature within 50… 700 C, the ratio Cu: Fe = 1: 2.7, pH = 8.8… 10.5 and aeration intensity 4… 8 l / min precipitates are formed, which consist in the vast majority of ferrites and metallic copper.

Magnetic Study of CuFe2O4-SiO2 Aerogel and Xerogel Nanocomposites

CuFe2O4 is an example of ferrites whose physico-chemical properties can vary greatly at the nanoscale. Here, sol-gel techniques are used to produce CuFe2O4-SiO2 nanocomposites where copper ferrite nanocrystals are grown within a porous dielectric silica matrix. Nanocomposites in the form of both xerogels and aerogels with variable loadings of copper ferrite (5 wt%, 10 wt% and 15 wt%) were synthesized. Transmission electron microscopy and X-ray diffraction investigations showed the occurrence of CuFe2O4 nanoparticles with average crystal size ranging from a few nanometers up to around 9 nm, homogeneously distributed within the porous silica matrix, after thermal treatment of the samples at 900 °C. Evidence of some impurities of CuO and -Fe2O3 was found in the aerogel samples with 10 wt% and 15 wt% loading. DC magnetometry was used to investigate the magnetic properties of these nanocomposites, as a function of the loading of copper ferrite and of the porosity characteristics. All the nanocomposites show a blocking temperature lower than RT and soft magnetic features at low temperature. The observed magnetic parameters are interpreted taking into account the occurrence of size and interaction effects in an ensemble of superparamagnetic nanoparticles distributed in a matrix. These results highlight how aerogel and xerogel matrices give rise to nanocomposites with different magnetic features and how the spatial distribution of the nanophase in the matrices modifies the final magnetic properties with respect to the case of conventional unsupported nanoparticles.