scholarly journals High-Performance Wearable Strain Sensor Based on MXene@Cotton Fabric with Network Structure

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 889
Author(s):  
Lu Liu ◽  
Libo Wang ◽  
Xuqing Liu ◽  
Wenfeng Yuan ◽  
Mengmeng Yuan ◽  
...  
Keyword(s):  
Cotton Fabric ◽  
High Performance ◽  
Mechanical Performance ◽  
Active Material ◽  
Large Body ◽  
Strain Sensor ◽  
Strain Range ◽  
Gauge Factor ◽  
Wearable Electronics ◽  
High Durability

Flexible and comfortable wearable electronics are as a second skin for humans as they can collect the physiology of humans and show great application in health and fitness monitoring. MXene Ti3C2Tx have been used in flexible electronic devices for their unique properties such as high conductivity, excellent mechanical performance, flexibility, and good hydrophilicity, but less research has focused on MXene-based cotton fabric strain sensors. In this work, a high-performance wearable strain sensor composed of two-dimensional (2D) MXene d-Ti3C2Tx nanomaterials and cotton fabric is reported. Cotton fabrics were selected as substrate as they are comfortable textiles. As the active material in the sensor, MXene d-Ti3C2Tx exhibited an excellent conductivity and hydrophilicity and adhered well to the fabric fibers by electrostatic adsorption. The gauge factor of the MXene@cotton fabric strain sensor reached up to 4.11 within the strain range of 15%. Meanwhile, the sensor possessed high durability (>500 cycles) and a low strain detection limit of 0.3%. Finally, the encapsulated strain sensor was used to detect subtle or large body movements and exhibited a rapid response. This study shows that the MXene@cotton fabric strain sensor reported here have great potential for use in flexible, comfortable, and wearable devices for health monitoring and motion detection.

scholarly journals High-Performance Wearable Strain Sensor Based on MXene@Cotton Fabric with Network Structure

2021 ◽  
Author(s):  
Lu Liu ◽  
Libo Wang ◽  
Xuqing Liu ◽  
Wenfeng Yuan ◽  
Mengmeng Yuan ◽  
...  
Keyword(s):  
Cotton Fabric ◽  
High Performance ◽  
Mechanical Performance ◽  
Active Material ◽  
Large Body ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Gauge Factor

Abstract Although 2D nanomaterials such as MXene Ti3C2Tx have been used in flexible electronic devices for their unique properties such as high conductivity, excellent mechanical performance, flexibility, and good hydrophilicity, less research has focused on of MXene-based cotton fabric strain sensors. Moreover, fabrication of wearable strain sensors with a low cost, high sensitivity, good biocompatibility, and broad sensing range is still a challenge. In this work, a high-performance wearable strain sensor composed of 2D MXene d-Ti3C2Tx nanomaterials and cotton fabric is reported. As the active material in the sensor, MXene d-Ti3C2Tx exhibited an excellent conductivity and hydrophilicity and adhered well to the fabric fibers by electrostatic adsorption. Due to the unique structure of the fabric substrate and the properties of MXene sheets, the fabricated pressure sensor achieved a high sensitivity. The gauge factor of the MXene@cotton fabric strain sensor reached up to 4.11 within the strain range of 15 %. Meanwhile, the sensor possessed high durability (>500 cycles) and a low strain detection limit of 0.3%. Finally, the encapsulated strain sensor was used to detect subtle or large body movements and exhibited a rapid response. This study shows that the MXene@cotton fabric strain sensor reported here have great potential for use in flexible, comfortable, and wearable devices for health monitoring and motion detection.

High-Performance Wearable Strain Sensor Based on Graphene/Cotton Fabric with High Durability and Low Detection Limit

2019 ◽  
Vol 12 (1) ◽  
pp. 1474-1485 ◽  
Author(s):  
Yanjun Zheng ◽  
Yilong Li ◽  
Yujie Zhou ◽  
Kun Dai ◽  
Guoqiang Zheng ◽  
...  
Keyword(s):  
Detection Limit ◽  
Cotton Fabric ◽  
High Performance ◽  
Strain Sensor ◽  
Low Detection Limit ◽  
High Durability

scholarly journals Ultrasensitive Strain Sensor Based on Pre-Generated Crack Networks Using Ag Nanoparticles/Single-Walled Carbon Nanotube (SWCNT) Hybrid Fillers and a Polyester Woven Elastic Band

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2531
Author(s):  
Yelin Ko ◽  
Ji-seon Kim ◽  
Chi Cuong Vu ◽  
Jooyong Kim
Keyword(s):  
High Performance ◽  
Strain Sensor ◽  
Strain Range ◽  
Human Motion ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Elastic Band ◽  
Practical Applications ◽  
Single Walled Carbon ◽  
Novel Strategy

Flexible strain sensors are receiving a great deal of interest owing to their prospective applications in monitoring various human activities. Among various efforts to enhance the sensitivity of strain sensors, pre-crack generation has been well explored for elastic polymers but rarely on textile substrates. Herein, a highly sensitive textile-based strain sensor was fabricated via a dip-coat-stretch approach: a polyester woven elastic band was dipped into ink containing single-walled carbon nanotubes coated with silver paste and pre-stretched to generate prebuilt cracks on the surface. Our sensor demonstrated outstanding sensitivity (a gauge factor of up to 3550 within a strain range of 1.5–5%), high stability and durability, and low hysteresis. The high performance of this sensor is attributable to the excellent elasticity and woven structure of the fabric substrate, effectively generating and propagating the prebuilt cracks. The strain sensor integrated into firefighting gloves detected detailed finger angles and cyclic finger motions, demonstrating its capability for subtle human motion monitoring. It is also noteworthy that this novel strategy is a very quick, straightforward, and scalable method of fabricating strain sensors, which is extremely beneficial for practical applications.

scholarly journals Polyaniline Nanofiber Wrapped Fabric for High Performance Flexible Pressure Sensors

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1120 ◽  
Author(s):  
Kangning Liu ◽  
Ziqiang Zhou ◽  
Xingwu Yan ◽  
Xiang Meng ◽  
Hua Tang ◽  
...  
Keyword(s):  
High Performance ◽  
Rational Design ◽  
Active Material ◽  
Pressure Sensors ◽  
Linear Range ◽  
Superior Performance ◽  
Wearable Electronics ◽  
Wide Linear Range ◽  
Polyaniline Nanofiber ◽  
Flexible Pressure Sensors

The rational design of high-performance flexible pressure sensors with both high sensitivity and wide linear range attracts great attention because of their potential applications in wearable electronics and human-machine interfaces. Here, polyaniline nanofiber wrapped nonwoven fabric was used as the active material to construct high performance, flexible, all fabric pressure sensors with a bottom interdigitated textile electrode. Due to the unique hierarchical structures, large surface roughness of the polyaniline coated fabric and high conductivity of the interdigitated textile electrodes, the obtained pressure sensor shows superior performance, including ultrahigh sensitivity of 46.48 kPa−1 in a wide linear range (<4.5 kPa), rapid response/relaxation time (7/16 ms) and low detection limit (0.46 Pa). Based on these merits, the practical applications in monitoring human physiological signals and detecting spatial distribution of subtle pressure are demonstrated, showing its potential for health monitoring as wearable electronics.

High-performance strain sensor based on a 3D conductive structure for wearable electronics

2019 ◽  
Vol 52 (39) ◽  
pp. 395401 ◽  
Author(s):  
Lei Zhang ◽  
Hairong Kou ◽  
Qiulin Tan ◽  
Guanyu Liu ◽  
Wendong Zhang ◽  
...  
Keyword(s):  
High Performance ◽  
Strain Sensor ◽  
Wearable Electronics

Direct Printing of a Flexible Strain Sensor for Distributed Monitoring of Deformation in Inflatable Structures

2019 ◽  
Author(s):  
Mohammed Al-Rubaiai ◽  
Ryohei Tsuruta ◽  
Taewoo Nam ◽  
Umesh Gandhi ◽  
Xiaobo Tan
Keyword(s):  
3D Printing ◽  
Structural Changes ◽  
Strain Sensor ◽  
Strain Range ◽  
Gauge Factor ◽  
Distributed Monitoring ◽  
Inflatable Structures ◽  
Resistance Change ◽  
Flexible Strain Sensor ◽  
Conductive Paint

Abstract Inflatable structures provide significant volume and weight savings for future space and soft robotic applications. Structural health monitoring (SHM) of these structures is essential to ensuring safe operation, providing early warnings of damage, and measuring structural changes over time. In this paper, we propose the design of a single flexible strain sensor for distributed monitoring of an inflatable tube, in particular, the detection and localization of a kink should that occur. Several commercially available conductive materials, including 3D-printing filaments, conductive paint, and conductive fabrics are explored for their strain-sensing performance, where the resistance change under uniaxial tension is measured, and the corresponding gauge factor (GF) is characterized. Flexible strain sensors are then fabricated and integrated with an inflatable structure fabric using screen-printing or 3D-printing techniques, depending on the nature of the raw conductive material. Among the tested materials, the conductive paint shows the highest stability, with GF of 15 and working strain range of 2.28%. Finally, the geometry of the sensor is designed to enable distributed monitoring of an inflatable tube. In particular, for a given deformation magnitude, the sensor output shows a monotonic relationship with the location where the deformation is applied, thus enabling the monitoring of the entire tube with a single sensor.

scholarly journals Polymer-Based Self-Standing Flexible Strain Sensor

2010 ◽  
Vol 2010 ◽  
pp. 1-5 ◽  
Author(s):  
Fernando Martinez ◽  
Gregorio Obieta ◽  
Ion Uribe ◽  
Tomasz Sikora ◽  
Estibalitz Ochoteco
Keyword(s):  
Electrical Conductivity ◽  
Electrical Resistance ◽  
Strain Sensor ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Wearable Electronics ◽  
Rehabilitation Devices ◽  
Flexible Strain Sensor

The design and characterization of polymer-based self-standing flexible strain sensors are presented in this work. Properties as lightness and flexibility make them suitable for the measurement of strain in applications related with wearable electronics such as robotics or rehabilitation devices. Several sensors have been fabricated to analyze the influence of size and electrical conductivity on their behavior. Elongation and applied charge were precisely controlled in order to measure different parameters as electrical resistance, gauge factor (GF), hysteresis, and repeatability. The results clearly show the influence of size and electrical conductivity on the gauge factor, but it is also important to point out the necessity of controlling the hysteresis and repeatability of the response for precision-demanding applications.

Direct-Write Stretchable Sensors Using Single-Walled Carbon Nanotube/Polymer Matrix

2013 ◽  
Vol 135 (1) ◽  
Author(s):  
Morteza Vatani ◽  
Yanfeng Lu ◽  
Kye-Shin Lee ◽  
Ho-Chan Kim ◽  
Jae-Won Choi
Keyword(s):  
Large Strain ◽  
Strain Range ◽  
Free Form ◽  
Gauge Factor ◽  
Direct Write ◽  
Wearable Electronics ◽  
Resistance Change ◽  
Single Walled Carbon ◽  
3D Structural Electronics ◽  
Stretchable Sensors

There have been increasing demands and interests in stretchable sensors with the development of flexible or stretchable conductive materials. These sensors can be used for detecting large strain, 3D deformation, and a free-form shape. In this work, a stretchable conductive sensor has been developed using single-walled carbon nanotubes (SWCNTs) and monofunctional acrylate monomers (cyclic trimethylolpropane formal acrylate and acrylate ester). The suggested sensors have been fabricated using a screw-driven microdispensing direct-write (DW) technology. To demonstrate the capabilities of the DW system, effects of dispensing parameters such as the feed rate and material flow rate on created line widths were investigated. Finally, a stretchable conductive sensor was fabricated using proper dispensing parameters, and an experiment for stretchability and resistance change was accomplished. The result showed that the sensor had a large strain range up to 90% with a linear resistance change and gauge factor ∼2.7. Based on the results, it is expected that the suggested DW stretchable sensor can be used in many application areas such as wearable electronics, tactile sensors, 3D structural electronics, etc.

scholarly journals Hierarchical Ni(OH)2/Cu(OH)2 interwoven nanosheets in situ grown on Ni–Cu–P alloy plated cotton fabric for flexible high-performance energy storage

2020 ◽  
Vol 2 (8) ◽  
pp. 3358-3366
Author(s):  
Man Zhou ◽  
Zhihang Jin ◽  
Lifang Su ◽  
Kai Li ◽  
Hong Zhao ◽  
...  
Keyword(s):  
Energy Storage ◽  
Cotton Fabric ◽  
High Performance ◽  
Mechanical Performance ◽  
Electronic Devices ◽  
High Conductivity ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

Flexible Ni(OH)2/Cu(OH)2@Ni–Cu–P alloy coated on cotton fabric with high conductivity and excellent mechanical performance is available for future smart and wearable electronic devices.

scholarly journals Synergistic Effect of Graphene/Silver Nanowire Hybrid Fillers on Highly Stretchable Strain Sensors Based on Spandex Composites

Nanomaterials ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 2063
Author(s):  
Tan Thong Vo ◽  
Hyeon-Jong Lee ◽  
Sang-Yun Kim ◽  
Ji Won Suk
Keyword(s):  
Synergistic Effect ◽  
High Performance ◽  
Silver Nanowires ◽  
Large Strain ◽  
Strain Range ◽  
Strain Sensors ◽  
Silver Nanowire ◽  
Gauge Factor ◽  
Hybrid Fillers ◽  
Conductive Nanomaterials

Embedding conductive nanomaterials into elastomeric polymer matrices is one of the most promising approaches for fabricating stretchable strain sensors capable of monitoring large mechanical movements or deformation through the detection of resistance changes. Here, hybrid fillers comprising graphene and silver nanowires (AgNWs) are incorporated into extremely stretchable spandex to fabricate strain sensors. Composites containing only graphene and those containing the graphene/AgNW hybrid fillers are systematically investigated by evaluating their electrical and mechanical properties. The synergistic effect between graphene and AgNWs enable the strain sensors based on the composites to experience a large strain range of up to 120%, and low hysteresis with a high gauge factor of 150.3 at a strain of 120%. These reliable strain sensors are utilized for monitoring human motions such as heartbeats and body movements. The findings of this study indicate the significant applicability of graphene/AgNW/spandex composites in future applications that demand high-performance stretchable strain sensors.

Sign in / Sign up

Export Citation Format

Share Document