scholarly journals Application of Nanotechnology in Analysis and Removal of Heavy Metals in Food and Water Resources

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1792
Author(s):  
Zhaoyuan Gong ◽  
Hiu Ting Chan ◽  
Qilei Chen ◽  
Hubiao Chen
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Water Resources ◽  
Heavy Metal Contamination ◽  
Metal Removal ◽  
Metal Oxide Nanoparticles ◽  
Heavy Metal Removal ◽  
Public Health Issue ◽  
Metal Analysis ◽  
Heavy Metal Analysis

Toxic heavy metal contamination in food and water from environmental pollution is a significant public health issue. Heavy metals do not biodegrade easily yet can be enriched hundreds of times by biological magnification, where toxic substances move up the food chain and eventually enter the human body. Nanotechnology as an emerging field has provided significant improvement in heavy metal analysis and removal from complex matrices. Various techniques have been adapted based on nanomaterials for heavy metal analysis, such as electrochemical, colorimetric, fluorescent, and biosensing technology. Multiple categories of nanomaterials have been utilized for heavy metal removal, such as metal oxide nanoparticles, magnetic nanoparticles, graphene and derivatives, and carbon nanotubes. Nanotechnology-based heavy metal analysis and removal from food and water resources has the advantages of wide linear range, low detection and quantification limits, high sensitivity, and good selectivity. There is a need for easy and safe field application of nanomaterial-based approaches.

Removal of Particles and Dissolved Metals in Motorway Runoff by Filtration and Adsorption Using the Expanded Polypropylene Media

2009 ◽  
Vol 620-622 ◽  
pp. 125-128 ◽  
Author(s):  
Sung Won Kang ◽  
Seog Ku Kim ◽  
Sang Leen Yun ◽  
Hye Cheol Oh ◽  
Jae Hwan Ahn
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Contamination ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
The Novel ◽  
Storm Events ◽  
Dissolved Metals ◽  
Metal Levels ◽  
Filtration Device

This research was conducted to investigate the application of the novel upflow-type filtration device using hydrophobia media made of expanded polypropylene (EPP) from driveways site. The higher level of motorway-derived heavy metal contamination exists in stormwater runoff from a road section and the heavy metal levels were higher than the regulated Korean environmental guideline in lake and river. For Cd, Cr, Cu, Pb and Zn, the influent event mean concentrations (EMCs) during 8 storm periods were 2.75, 37.3, 90.5, 118.5 and 546.5 µg/L, respectively. The novel upflow-type filtration device with main mechanism of filtration and adsorption showed removal (>91%, >93%, >85%, >91% and >80%) of the studied heavy metals (Cd, Cr, Cu, Pb and Zn) and differences of medians of removal efficiencies among heavy metals were not statistically signficant by Kruskal-Wallis test (p>0.05) during 8 storm events. It is found that EPP media is very effective at the removal of the heavy metals, and the magnitude of heavy metal removal in a decreasing order is Cr, Cd, Pb, Cu and Zn.

Low Cost Absorbents, Techniques, and Heavy Metal Removal Efficiency

2018 ◽  
pp. 50-79
Author(s):  
Harendra Kumar Sharma ◽  
Irfan Rashid Sofi ◽  
Khursheed Ahmad Wani
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Contamination ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Future Research ◽  
Removal Of Heavy Metals ◽  
Living Species ◽  
High Concentrations

Heavy metal contamination in water is a serious concern to the environment and human health. High concentrations of heavy metals in the environment can be toxic to a variety of living species. Natural bio-absorbents are abundant and inexpensive and considered a waste if not managed properly. The role of bio-absorbents has been widely studied and has been utilized for the removal of heavy metals. The objective of the chapter is to search the database for different absorbents and their efficiency for the removal of heavy metals. Key words related to the study have been used to select different papers published by the researchers all over the world. A rigorous three-tier process has been utilized by the authors to select the papers from the database for the current study. This chapter has identified a few research gaps in the field of heavy metal removal by using different low cast absorbents that need to be taken into account in future research.

scholarly journals Heavy Metal Contamination in an Industrially Affected River Catchment Basin: Assessment, Effects, and Mitigation

2021 ◽  
Vol 18 (6) ◽  
pp. 2881
Author(s):  
Gor Gevorgyan ◽  
Armine Mamyan ◽  
Tatevik Boshyan ◽  
Tigran Vardanyan ◽  
Ashok Vaseashta
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Contamination ◽  
Heavy Metal Contamination ◽  
Metal Removal ◽  
Ingestion Rate ◽  
Heavy Metal Removal ◽  
Hazard Index ◽  
Catchment Basin ◽  
River Catchment

The concentrations of some heavy metals (Fe, Zn, Mn, Cu, Mo, Pb, Cd) were measured in river waters, macrozoobenthos, and fish (Kura scrapers) from one of the most developed mining areas in Armenia, the Debed River catchment basin. In order to assess heavy metal contamination and its hydro-ecological and health effects, the macrozoobenthos quantitative and qualitative parameters, geo-accumulation index, and hazard index were determined. Microalgal extraction experiments were conducted to assess the microalgal remediation efficiency for heavy metal removal from mining wastewaters. The results showed that the rivers in many sites were polluted with different heavy metals induced by mining activities, which adversely affected macrozoobenthos growth and caused human health risks in the case of waters used for drinking purposes. However, the river fish, particularly Kura scrapers, were determined to be safe for consumption by the local people, as per the conditions of the evaluated fish ingestion rate. The results have shown that microalgal remediation, particularly with Desmodesmus abundans M3456, can be used for the efficient removal ~(62–100%) of certain emerging contaminants (Mn, Pb, Cu, Zn, Cd) from mining wastewater discharged in the Debed catchment basin.

A Review on Current Development of Animal Bone-Based Sorbent for Heavy Metals Removal from Contaminated Water and Wastewater

2021 ◽  
Vol 897 ◽  
pp. 109-115
Author(s):  
Sri Martini ◽  
Kiagus Ahmad Roni ◽  
Dian Kharismadewi ◽  
Erna Yuliwaty
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Inorganic Compounds ◽  
Heavy Metal Removal ◽  
Influential Factors ◽  
Contaminated Water ◽  
Animal Bone ◽  
Water And Wastewater ◽  
Cow Bone

This review article presents the usage of various animal bones such as chicken bone, fish bone, pig bone, camel bone, and cow bone as reliable biosorbent materials to remove heavy metals contained in contaminated water and wastewater. The sources and toxicity effects of heavy metal ions are also discussed properly. Then specific insights related to adsorption process and its influential factors along with the proven potentiality of selected biosorbents especially derived from animal bone are also explained. As the biosorbents are rich in particular organic and inorganic compounds and functional groups in nature, they play an important role in heavy metal removal from contaminated solutions. Overall, after conducting study reports on the literature, a brief conclusion can be drawn that animal bone waste has satisfactory efficacy as effective, efficient, and environmentally friendly sorbent material.

scholarly journals Growth and metal removal efficiency of the green algae Schroederia setigera and Selenastrum bibraianum exposed to nickel, zinc and cadmium

2020 ◽  
Vol 58 (5A) ◽  
pp. 22
Author(s):  
Dao Thanh Son ◽  
Van Tai Nguyen ◽  
Thuy Nhu Quynh Vo ◽  
Vinh Quang Tran ◽  
Thi My Chi Vo ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Green Algae ◽  
Removal Efficiency ◽  
Heavy Metal Contamination ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Pilot Scale ◽  
Nickel Zinc ◽  
Ecological Protection

Heavy metal contamination is among the globally environmental and ecological concerns. In this study we assessed the development of the two green algae Schroederia setigera and Selenastrum bibraianum under exposures to 5 – 200 µg/L of Ni, Zn, and Cd in the laboratory conditions. Heavy metal removal efficiency of S. setigera was also tested in 537 µg Ni/L, 734 µg Zn/L, and 858 µg Cd/L. We found that the exposures with these heavy metals caused inhibitory on the growth of S. bibraianum. The S. bibraianum cell size in the 200 µg Zn/L treatment was around two times smaller than the control. However, Zn and Cd at the concentration of 200 µg/L did not inhibit the growth of S. setigera over 18 days of exposure. The S. setigera also grew well during 8 days exposed to Ni at the same concentration. Besides, the alga S. setigera could remove 66% of Zn, 18% of Cd and 12% of Ni out of the test medium after 16 days of incubation. The Vietnam Technical Regulation related to metals should be considered for ecological protection. We recommend to test the metal removal by the alga S. setigera at pilot scale prior to apply it in situ

Heavy metal removal from wastewater and leachate co-treatment sludge by sulfur oxidizing bacteria

2001 ◽  
Vol 44 (10) ◽  
pp. 53-58 ◽  
Author(s):  
L. C. Aralp ◽  
A. Erdincler ◽  
T. T. Onay
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Municipal Wastewater ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Heavy Metal Concentration ◽  
Organic Content ◽  
Removal Of Heavy Metals ◽  
Sulfur Oxidizing ◽  
Sulfur Oxidizing Bacteria

Heavy metal concentration in sludge is one of the major obstacles for the application of sludge on land. There are various methods for the removal of heavy metals in sludge. Using sulfur oxidizing bacteria for microbiological removal of heavy metals from sludges is an outstanding option because of high metal solubilization rates and the low cost. In this study, bioleaching by indigenous sulfur oxidizing bacteria was applied to sludges generated from the co-treatment of municipal wastewater and leachate for the removal of selected heavy metals. Sulfur oxidizing bacteria were acclimated to activated sludge. The effect of the high organic content of leachate on the bioleaching process was investigated in four sets of sludges having different concentrations of leachate. Sludges in Sets A, B, C and D were obtained from co-treatment of wastewater and 3%, 5%, 7% and 10% (v/v) leachate respectively. The highest Cr, Ni and Fe solubilization was obtained from Set A. Sulfur oxidizing bacteria were totally inhibited in Set D that received the highest volume of leachate.

Nanosheet-based magadiite: a controllable two-dimensional trap for selective capture of heavy metals

2018 ◽  
Vol 6 (28) ◽  
pp. 13624-13632 ◽  
Author(s):  
He Ding ◽  
Yang Chen ◽  
Tianyi Fu ◽  
Peng Bai ◽  
Xianghai Guo
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Interlayer Space ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Two Dimensional ◽  
2D Structure

Nanosheet-based magadiites are promising adsorbents with controlled interlayer space and a well-defined 2D structure, which make them new candidates for heavy metal removal.

scholarly journals Enhanced Adsorptive Bioremediation of Heavy Metals (Cd2+, Cr6+, Pb2+) by Methane-Oxidizing Epipelon

2020 ◽  
Vol 8 (4) ◽  
pp. 505 ◽  
Author(s):  
Muhammad Faheem ◽  
Sadaf Shabbir ◽  
Jun Zhao ◽  
Philip G Kerr ◽  
Nasrin Sultana ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Methane Oxidation ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
16S Rrna Genes ◽  
Rrna Genes ◽  
Aqueous Environment ◽  
Type I ◽  
Methane Concentrations

Cadmium (Cd), chromium (Cr) and lead (Pb) are heavy metals that have been classified as priority pollutants in aqueous environment while methane-oxidizing bacteria as a biofilter arguably consume up to 90% of the produced methane in the same aqueous environment before it escapes into the atmosphere. However, the underlying kinetics and active methane oxidizers are poorly understood for the hotspot of epipelon that provides a unique micro-ecosystem containing diversified guild of microorganisms including methane oxidizers for potential bioremediation of heavy metals. In the present study, the Pb2+, Cd2+and Cr6+ bioremediation potential of epipelon biofilm was assessed under both high (120,000 ppm) and near-atmospheric (6 ppm) methane concentrations. Epipelon biofilm demonstrated a high methane oxidation activity following microcosm incubation amended with a high concentration of methane, accompanied by the complete removal of 50 mg L−1 Pb2+ and 50 mg L−1 Cd2+ (14 days) and partial (20%) removal of 50 mg L−1 Cr6+ after 20 days. High methane dose stimulated a faster (144 h earlier) heavy metal removal rate compared to near-atmospheric methane concentrations. DNA-based stable isotope probing (DNA-SIP) following 13CH4 microcosm incubation revealed the growth and activity of different phylotypes of methanotrophs during the methane oxidation and heavy metal removal process. High throughput sequencing of 13C-labelled particulate methane monooxygenase gene pmoA and 16S rRNA genes revealed that the prevalent active methane oxidizers were type I affiliated methanotrophs, i.e., Methylobacter. Type II methanotrophs including Methylosinus and Methylocystis were also labeled only under high methane concentrations. These results suggest that epipelon biofilm can serve as an important micro-environment to alleviate both methane emission and the heavy metal contamination in aqueous ecosystems with constant high methane fluxes.

scholarly journals PHYTOCHEMICAL SCREENING AND HEAVY METAL ANALYSIS OF ULVA RETICULATA

2018 ◽  
Vol 11 (4) ◽  
pp. 84
Author(s):  
Gomathi K ◽  
Anna Sheba L
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Inductively Coupled Plasma ◽  
Tamil Nadu ◽  
Optical Emission ◽  
Phytochemical Analysis ◽  
Icp Oes ◽  
Dissolved Metals ◽  
Metal Analysis ◽  
Heavy Metal Analysis

 Objective: Ulva reticulata is a marine edible green seaweed widely distributed along the coastal lines of India. The present study was designed to screen the phytochemicals and evaluate heavy metals content of U. reticulata collected from Rameshwaram, Tamil Nadu, India, in the perspective of assessing their therapeutic value and/or safety in relation to its uses.Method: The seaweed sample was subjected to extraction with solvents of different polarities (methanol, ethanol, acetone, chloroform, and petroleum ether) and screened for phytochemicals according to standard methods. Heavy metal analysis was also performed with the dried sample powder using inductively coupled plasma optical emission spectrophotometer (ICP-OES).Result: Preliminary phytochemical analysis revealed the presence of reducing sugar, proteins, flavonoids, glycosides, alkaloids, and anthraquinones. ICP-OES indicated the seaweed to contain relative amount of heavy metals in the order of iron (Fe) > chromium (Cr) > Zinc (Zn) > nickel (Ni) > copper (Cu) > lead (Pb) - cadmium (Cd) and is within the permissible limits set by the WHO/FAO, except Fe and Cr.Conclusion: The different solvent extracts of U. reticulata showed the presence of the number of phytochemicals. Furthermore, the present study has revealed the presence of heavy metals in U. reticulata which can be a representative picture of the dissolved metals in the aquatic phase.

scholarly journals Advances in heavy metal removal by sulfate-reducing bacteria

2020 ◽  
Vol 81 (9) ◽  
pp. 1797-1827 ◽  
Author(s):  
Ya-Nan Xu ◽  
Yinguang Chen
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Industrial Development ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Sulfate Reducing Bacteria ◽  
Sulfate Reducing ◽  
Recent Advances ◽  
Conventional Methods ◽  
Reducing Bacteria

Abstract Industrial development has led to generation of large volumes of wastewater containing heavy metals, which need to be removed before the wastewater is released into the environment. Chemical and electrochemical methods are traditionally applied to treat this type of wastewater. These conventional methods have several shortcomings, such as secondary pollution and cost. Bioprocesses are gradually gaining popularity because of their high selectivities, low costs, and reduced environmental pollution. Removal of heavy metals by sulfate-reducing bacteria (SRB) is an economical and effective alternative to conventional methods. The limitations of and advances in SRB activity have not been comprehensively reviewed. In this paper, recent advances from laboratory studies in heavy metal removal by SRB were reported. Firstly, the mechanism of heavy metal removal by SRB is introduced. Then, the factors affecting microbial activity and metal removal efficiency are elucidated and discussed in detail. In addition, recent advances in selection of an electron donor, enhancement of SRB activity, and improvement of SRB tolerance to heavy metals are reviewed. Furthermore, key points for future studies of the SRB process are proposed.

Sign in / Sign up

Export Citation Format

Share Document